100% Latest & Updated Microsoft AZ-801 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 320
A new S2D node has no reachable storage-subnet IP after a DHCP scope change but cluster membership still survives via management. Which response addresses the identified root cause without weakening other controls?
- Provide a supported high-bandwidth low-latency SMB storage network before expanding the workload.
- Restore dedicated storage-address configuration and verify peer SMB connectivity before adding the node to storage service.
- Verify interface roles, metrics and SMB Multichannel route selection for the intended storage adapters.
- Align switch and host VLAN tagging and validate SMB reachability end to end.
Explanation
Correct Answer
B:Cluster membership connectivity does not guarantee that the separate storage data plane is healthy. A suitable corrective action is to restore dedicated storage-address configuration and verify peer SMB connectivity before adding the node to storage service.
Incorrect Answers
A:S2D data replication depends on fast east-west networking, commonly at least 10-GbE. In this situation, cluster membership connectivity does not guarantee that the separate storage data plane is healthy.
C:SMB traffic-path selection depends on detected NIC capabilities and reachable peers. Here, cluster membership connectivity does not guarantee that the separate storage data plane is healthy.
D:Mismatched L2 segmentation prevents storage packets from reaching peer nodes despite healthy adapter links. In this situation, cluster membership connectivity does not guarantee that the separate storage data plane is healthy.
Question 321
A degraded S2D cluster is scheduled for an OS upgrade while the storage pool still reports unfinished repairs. Which administrative change most directly resolves the documented failure?
- Wait for S2D pool repair and resiliency health to show restored redundancy.
- Use an approved coordinated shutdown/bring-up procedure with backups and storage health validation.
- Complete redundancy repair and health verification before upgrading another node.
- Validate supported firmware, drivers and disk presentation before admitting the node to the cluster.
Explanation
Correct Answer
C:Removing storage capacity during a degraded state can exceed remaining fault tolerance. The targeted remedy is to complete redundancy repair and health verification before upgrading another node.
Incorrect Answers
A:Physical device discovery precedes data-copy rebuild completion. However, removing storage capacity during a degraded state can exceed remaining fault tolerance.
B:Simultaneously removing all nodes breaks availability and risks recovery issues if storage state is not handled in sequence. Here, removing storage capacity during a degraded state can exceed remaining fault tolerance.
D:Mixed unsupported components can prevent storage pool recognition or reliable I/O after joining. However, removing storage capacity during a degraded state can exceed remaining fault tolerance.
Question 322
A node is about to be taken offline for service but its virtual disks have not finished moving workload roles away. Which response addresses the identified root cause without weakening other controls?
- Use an approved coordinated shutdown/bring-up procedure with backups and storage health validation.
- Validate supported firmware, drivers and disk presentation before admitting the node to the cluster.
- Complete redundancy repair and health verification before upgrading another node.
- Drain the node and confirm cluster storage and roles remain healthy before shutdown.
Explanation
Correct Answer
D:Drain the node and confirm cluster storage and roles remain healthy before shutdown. This addresses the condition because planned S2D node maintenance must preserve accessible data and workload ownership.
Incorrect Answers
A:Simultaneously removing all nodes breaks availability and risks recovery issues if storage state is not handled in sequence. Here, planned S2D node maintenance must preserve accessible data and workload ownership.
B:Mixed unsupported components can prevent storage pool recognition or reliable I/O after joining. In this situation, planned S2D node maintenance must preserve accessible data and workload ownership.
C:Removing storage capacity during a degraded state can exceed remaining fault tolerance. However, planned S2D node maintenance must preserve accessible data and workload ownership.
Question 323
A replacement S2D host has different storage controller firmware from the supported cluster hardware baseline. Which supported action should be taken for this reported condition?
- Validate supported firmware, drivers and disk presentation before admitting the node to the cluster.
- Complete redundancy repair and health verification before upgrading another node.
- Drain the node and confirm cluster storage and roles remain healthy before shutdown.
- Use an approved coordinated shutdown/bring-up procedure with backups and storage health validation.
Explanation
Correct Answer
A:Mixed unsupported components can prevent storage pool recognition or reliable I/O after joining. For that reason, validate supported firmware, drivers and disk presentation before admitting the node to the cluster.
Incorrect Answers
B:Removing storage capacity during a degraded state can exceed remaining fault tolerance. However, mixed unsupported components can prevent storage pool recognition or reliable I/O after joining.
C:Planned S2D node maintenance must preserve accessible data and workload ownership. Here, mixed unsupported components can prevent storage pool recognition or reliable I/O after joining.
D:Simultaneously removing all nodes breaks availability and risks recovery issues if storage state is not handled in sequence. In this situation, mixed unsupported components can prevent storage pool recognition or reliable I/O after joining.
Question 324
After replacing a failed drive, operators assume protection is restored as soon as the replacement appears in the hardware inventory. Which supported action should be taken for this reported condition?
- Complete redundancy repair and health verification before upgrading another node.
- Wait for S2D pool repair and resiliency health to show restored redundancy.
- Add compatible capacity or reclaim space, then allow supported pool repair to reconstruct data copies.
- Determine whether the drive has truly failed and follow supported pool repair/retirement steps.
Explanation
Correct Answer
B:Wait for S2D pool repair and resiliency health to show restored redundancy. The underlying technical reason is that physical device discovery precedes data-copy rebuild completion.
Incorrect Answers
A:Removing storage capacity during a degraded state can exceed remaining fault tolerance. However, physical device discovery precedes data-copy rebuild completion.
C:Healing requires eligible free extents across failure domains, not just healthy controller status. In this situation, physical device discovery precedes data-copy rebuild completion.
D:Suppressing an inventory alert does not rebuild missing data copies or establish safe redundancy. However, physical device discovery precedes data-copy rebuild completion.
Question 325
An administrator deletes a missing disk entry to make dashboard warnings disappear before preserving its diagnostic evidence. Which configuration or recovery action best matches this evidence?
- Add compatible capacity or reclaim space, then allow supported pool repair to reconstruct data copies.
- Wait for S2D pool repair and resiliency health to show restored redundancy.
- Determine whether the drive has truly failed and follow supported pool repair/retirement steps.
- Verify S2D health, pool state, network tests and cluster validation on the final upgraded topology.
Explanation
Correct Answer
C:Suppressing an inventory alert does not rebuild missing data copies or establish safe redundancy. A suitable corrective action is to determine whether the drive has truly failed and follow supported pool repair/retirement steps.
Incorrect Answers
A:Healing requires eligible free extents across failure domains, not just healthy controller status. Here, suppressing an inventory alert does not rebuild missing data copies or establish safe redundancy.
B:Physical device discovery precedes data-copy rebuild completion. In this situation, suppressing an inventory alert does not rebuild missing data copies or establish safe redundancy.
D:Host online status alone does not prove restored resiliency, compatibility or workload service levels. Here, suppressing an inventory alert does not rebuild missing data copies or establish safe redundancy.
Question 326
An upgrade to a newer Windows Server version leaves S2D clustered storage incompatible with a third-party filter driver. What is the best targeted remediation for the behavior described?
- Complete redundancy repair and health verification before upgrading another node.
- Validate supported firmware, drivers and disk presentation before admitting the node to the cluster.
- Diagnose and restore the normal CSV/S2D direct data path before declaring maintenance complete.
- Pause rollout and resolve driver/filter compatibility using a supported staged upgrade plan.
Explanation
Correct Answer
D:Storage minifilters and drivers participate in the I/O path and must be validated against target OS behavior. The targeted remedy is to pause rollout and resolve driver/filter compatibility using a supported staged upgrade plan.
Incorrect Answers
A:Removing storage capacity during a degraded state can exceed remaining fault tolerance. In this situation, Storage minifilters and drivers participate in the I/O path and must be validated against target OS behavior.
B:Mixed unsupported components can prevent storage pool recognition or reliable I/O after joining. However, Storage minifilters and drivers participate in the I/O path and must be validated against target OS behavior.
C:Redirected access can keep workloads online while masking a persistent performance-impacting path failure. Here, Storage minifilters and drivers participate in the I/O path and must be validated against target OS behavior.
Question 327
A two-node S2D cluster shuts down both nodes for simultaneous firmware maintenance with no tested recovery sequence. Which Windows Server or Azure operation best addresses the reported fault?
- Use an approved coordinated shutdown/bring-up procedure with backups and storage health validation.
- Drain the node and confirm cluster storage and roles remain healthy before shutdown.
- Complete redundancy repair and health verification before upgrading another node.
- Verify S2D health, pool state, network tests and cluster validation on the final upgraded topology.
Explanation
Correct Answer
A:Use an approved coordinated shutdown/bring-up procedure with backups and storage health validation. This addresses the condition because simultaneously removing all nodes breaks availability and risks recovery issues if storage state is not handled in sequence.
Incorrect Answers
B:Planned S2D node maintenance must preserve accessible data and workload ownership. Here, simultaneously removing all nodes breaks availability and risks recovery issues if storage state is not handled in sequence.
C:Removing storage capacity during a degraded state can exceed remaining fault tolerance. In this situation, simultaneously removing all nodes breaks availability and risks recovery issues if storage state is not handled in sequence.
D:Host online status alone does not prove restored resiliency, compatibility or workload service levels. However, simultaneously removing all nodes breaks availability and risks recovery issues if storage state is not handled in sequence.
Question 328
A storage node is returned to service but clustered volumes remain in redirected I/O due to an unresolved direct-path issue. Which configuration or recovery action best matches this evidence?
- Complete redundancy repair and health verification before upgrading another node.
- Diagnose and restore the normal CSV/S2D direct data path before declaring maintenance complete.
- Verify S2D health, pool state, network tests and cluster validation on the final upgraded topology.
- Wait for S2D pool repair and resiliency health to show restored redundancy.
Explanation
Correct Answer
B:Redirected access can keep workloads online while masking a persistent performance-impacting path failure. For that reason, diagnose and restore the normal CSV/S2D direct data path before declaring maintenance complete.
Incorrect Answers
A:Removing storage capacity during a degraded state can exceed remaining fault tolerance. Here, redirected access can keep workloads online while masking a persistent performance-impacting path failure.
C:Host online status alone does not prove restored resiliency, compatibility or workload service levels. However, redirected access can keep workloads online while masking a persistent performance-impacting path failure.
D:Physical device discovery precedes data-copy rebuild completion. Here, redirected access can keep workloads online while masking a persistent performance-impacting path failure.
Question 329
An S2D repair backlog grows after a major drive loss and capacity is insufficient for new extents. Which supported action should be taken for this reported condition?
- Determine whether the drive has truly failed and follow supported pool repair/retirement steps.
- Wait for S2D pool repair and resiliency health to show restored redundancy.
- Add compatible capacity or reclaim space, then allow supported pool repair to reconstruct data copies.
- Complete redundancy repair and health verification before upgrading another node.
Explanation
Correct Answer
C:Add compatible capacity or reclaim space, then allow supported pool repair to reconstruct data copies. The underlying technical reason is that healing requires eligible free extents across failure domains, not just healthy controller status.
Incorrect Answers
A:Suppressing an inventory alert does not rebuild missing data copies or establish safe redundancy. In this situation, healing requires eligible free extents across failure domains, not just healthy controller status.
B:Physical device discovery precedes data-copy rebuild completion. However, healing requires eligible free extents across failure domains, not just healthy controller status.
D:Removing storage capacity during a degraded state can exceed remaining fault tolerance. In this situation, healing requires eligible free extents across failure domains, not just healthy controller status.
Question 330
A final node-upgrade report shows all hosts online but cluster-level validation has not been rerun. Which response addresses the identified root cause without weakening other controls?
- Wait for S2D pool repair and resiliency health to show restored redundancy.
- Use an approved coordinated shutdown/bring-up procedure with backups and storage health validation.
- Complete redundancy repair and health verification before upgrading another node.
- Verify S2D health, pool state, network tests and cluster validation on the final upgraded topology.
Explanation
Correct Answer
D:Host online status alone does not prove restored resiliency, compatibility or workload service levels. A suitable corrective action is to verify S2D health, pool state, network tests and cluster validation on the final upgraded topology.
Incorrect Answers
A:Physical device discovery precedes data-copy rebuild completion. However, host online status alone does not prove restored resiliency, compatibility or workload service levels.
B:Simultaneously removing all nodes breaks availability and risks recovery issues if storage state is not handled in sequence. Here, host online status alone does not prove restored resiliency, compatibility or workload service levels.
C:Removing storage capacity during a degraded state can exceed remaining fault tolerance. In this situation, host online status alone does not prove restored resiliency, compatibility or workload service levels.
Configuring Windows Server Hybrid Advanced Services (AZ-801) Practice Tests