100% Latest & Updated Microsoft AZ-801 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 330
A final node-upgrade report shows all hosts online but cluster-level validation has not been rerun. Which response addresses the identified root cause without weakening other controls?
- Wait for S2D pool repair and resiliency health to show restored redundancy.
- Use an approved coordinated shutdown/bring-up procedure with backups and storage health validation.
- Complete redundancy repair and health verification before upgrading another node.
- Verify S2D health, pool state, network tests and cluster validation on the final upgraded topology.
Explanation
Correct Answer
D:Host online status alone does not prove restored resiliency, compatibility or workload service levels. A suitable corrective action is to verify S2D health, pool state, network tests and cluster validation on the final upgraded topology.
Incorrect Answers
A:Physical device discovery precedes data-copy rebuild completion. However, host online status alone does not prove restored resiliency, compatibility or workload service levels.
B:Simultaneously removing all nodes breaks availability and risks recovery issues if storage state is not handled in sequence. Here, host online status alone does not prove restored resiliency, compatibility or workload service levels.
C:Removing storage capacity during a degraded state can exceed remaining fault tolerance. In this situation, host online status alone does not prove restored resiliency, compatibility or workload service levels.
Question 331
An Azure Windows VM has a Recovery Services vault but no associated backup policy, and no recovery points appear. Which configuration or recovery action best matches this evidence?
- Enable Azure VM backup for the VM using a suitable vault policy and confirm the first successful recovery point.
- Locate the protected item in the vault/region where backup was enabled and inspect its recovery points.
- Select a supported create-new-VM restore workflow using the intended recovery point and target network.
- Trigger and verify an on-demand backup or approved recovery point before the change.
Explanation
Correct Answer
A:Merely creating a vault does not enroll a protected VM or schedule backup jobs. The targeted remedy is to enable Azure VM backup for the VM using a suitable vault policy and confirm the first successful recovery point.
Incorrect Answers
B:Vault-scoped inventory and region determine which protected workload records are visible. In this situation, merely creating a vault does not enroll a protected VM or schedule backup jobs.
C:A non-destructive alternate-instance restore preserves the original while permitting recovery testing. However, merely creating a vault does not enroll a protected VM or schedule backup jobs.
D:An old successful job does not satisfy a current recovery point objective for imminent risky maintenance. Here, merely creating a vault does not enroll a protected VM or schedule backup jobs.
Question 332
A critical VM must retain a daily recovery point beyond the current policy's short retention window. What would be the most defensible next action based on the observed symptoms?
- Choose the supported stop-backup option that retains backup data rather than deleting recovery points.
- Change the associated backup policy retention settings within supported limits before older points age out.
- Trigger and verify an on-demand backup or approved recovery point before the change.
- Locate the protected item in the vault/region where backup was enabled and inspect its recovery points.
Explanation
Correct Answer
B:Change the associated backup policy retention settings within supported limits before older points age out. This addresses the condition because recovery point retention follows the policy schedule and lifecycle rather than the VM's uptime.
Incorrect Answers
A:Stopping protection and deleting retained backup copies are separate lifecycle actions. In this situation, recovery point retention follows the policy schedule and lifecycle rather than the VM's uptime.
C:An old successful job does not satisfy a current recovery point objective for imminent risky maintenance. Here, recovery point retention follows the policy schedule and lifecycle rather than the VM's uptime.
D:Vault-scoped inventory and region determine which protected workload records are visible. In this situation, recovery point retention follows the policy schedule and lifecycle rather than the VM's uptime.
Question 333
Backup jobs succeed in a secondary subscription but the operations team searches the wrong Recovery Services vault. What change should be prioritized to restore the intended behavior?
- Enable Azure VM backup for the VM using a suitable vault policy and confirm the first successful recovery point.
- Choose the supported stop-backup option that retains backup data rather than deleting recovery points.
- Locate the protected item in the vault/region where backup was enabled and inspect its recovery points.
- Reassociate protection with the current VM resource and manage the stale protected item deliberately.
Explanation
Correct Answer
C:Vault-scoped inventory and region determine which protected workload records are visible. For that reason, locate the protected item in the vault/region where backup was enabled and inspect its recovery points.
Incorrect Answers
A:Merely creating a vault does not enroll a protected VM or schedule backup jobs. However, vault-scoped inventory and region determine which protected workload records are visible.
B:Stopping protection and deleting retained backup copies are separate lifecycle actions. Here, vault-scoped inventory and region determine which protected workload records are visible.
D:Backup protection tracks resource identities, so name similarity does not guarantee new-instance coverage. However, vault-scoped inventory and region determine which protected workload records are visible.
Question 334
An operator deletes VM backup protection while intending only to pause future jobs, risking retained backup data. Which supported action should be taken for this reported condition?
- Locate the protected item in the vault/region where backup was enabled and inspect its recovery points.
- Restrict vault backup management permissions and enable supported security safeguards such as soft delete.
- Confirm item-level enablement and the actual scheduled backup job history.
- Choose the supported stop-backup option that retains backup data rather than deleting recovery points.
Explanation
Correct Answer
D:Choose the supported stop-backup option that retains backup data rather than deleting recovery points. The underlying technical reason is that stopping protection and deleting retained backup copies are separate lifecycle actions.
Incorrect Answers
A:Vault-scoped inventory and region determine which protected workload records are visible. Here, stopping protection and deleting retained backup copies are separate lifecycle actions.
B:Role separation and recovery retention controls reduce accidental or malicious destruction of restore data. In this situation, stopping protection and deleting retained backup copies are separate lifecycle actions.
C:A policy definition has no practical protection effect on resources not enrolled against it. However, stopping protection and deleting retained backup copies are separate lifecycle actions.
Question 335
A backup policy is configured for a VM but recent jobs report missed schedule windows because the machine was excluded from protection. Which configuration or recovery action best matches this evidence?
- Confirm item-level enablement and the actual scheduled backup job history.
- Enable Azure VM backup for the VM using a suitable vault policy and confirm the first successful recovery point.
- Locate the protected item in the vault/region where backup was enabled and inspect its recovery points.
- Choose the supported stop-backup option that retains backup data rather than deleting recovery points.
Explanation
Correct Answer
A:A policy definition has no practical protection effect on resources not enrolled against it. A suitable corrective action is to confirm item-level enablement and the actual scheduled backup job history.
Incorrect Answers
B:Merely creating a vault does not enroll a protected VM or schedule backup jobs. However, a policy definition has no practical protection effect on resources not enrolled against it.
C:Vault-scoped inventory and region determine which protected workload records are visible. Here, a policy definition has no practical protection effect on resources not enrolled against it.
D:Stopping protection and deleting retained backup copies are separate lifecycle actions. In this situation, a policy definition has no practical protection effect on resources not enrolled against it.
Question 336
A restore point is required for an Azure VM before an OS patch, and the owner assumes a successful nightly backup happened three days earlier. What would be the most defensible next action based on the observed symptoms?
- Enable Azure VM backup for the VM using a suitable vault policy and confirm the first successful recovery point.
- Trigger and verify an on-demand backup or approved recovery point before the change.
- Select a supported create-new-VM restore workflow using the intended recovery point and target network.
- Choose the supported stop-backup option that retains backup data rather than deleting recovery points.
Explanation
Correct Answer
B:An old successful job does not satisfy a current recovery point objective for imminent risky maintenance. The targeted remedy is to trigger and verify an on-demand backup or approved recovery point before the change.
Incorrect Answers
A:Merely creating a vault does not enroll a protected VM or schedule backup jobs. However, an old successful job does not satisfy a current recovery point objective for imminent risky maintenance.
C:A non-destructive alternate-instance restore preserves the original while permitting recovery testing. In this situation, an old successful job does not satisfy a current recovery point objective for imminent risky maintenance.
D:Stopping protection and deleting retained backup copies are separate lifecycle actions. However, an old successful job does not satisfy a current recovery point objective for imminent risky maintenance.
Question 337
A newly rebuilt VM reuses a name but has a different Azure resource identity; the vault still lists the retired machine. Which response addresses the identified root cause without weakening other controls?
- Locate the protected item in the vault/region where backup was enabled and inspect its recovery points.
- Confirm item-level enablement and the actual scheduled backup job history.
- Reassociate protection with the current VM resource and manage the stale protected item deliberately.
- Enable Azure VM backup for the VM using a suitable vault policy and confirm the first successful recovery point.
Explanation
Correct Answer
C:Reassociate protection with the current VM resource and manage the stale protected item deliberately. This addresses the condition because backup protection tracks resource identities, so name similarity does not guarantee new-instance coverage.
Incorrect Answers
A:Vault-scoped inventory and region determine which protected workload records are visible. Here, backup protection tracks resource identities, so name similarity does not guarantee new-instance coverage.
B:A policy definition has no practical protection effect on resources not enrolled against it. In this situation, backup protection tracks resource identities, so name similarity does not guarantee new-instance coverage.
D:Merely creating a vault does not enroll a protected VM or schedule backup jobs. Here, backup protection tracks resource identities, so name similarity does not guarantee new-instance coverage.
Question 338
A vault's backup data is at risk because the retention policy is frequently changed by broad administrators. What would be the most defensible next action based on the observed symptoms?
- Enable Azure VM backup for the VM using a suitable vault policy and confirm the first successful recovery point.
- Choose the supported stop-backup option that retains backup data rather than deleting recovery points.
- Locate the protected item in the vault/region where backup was enabled and inspect its recovery points.
- Restrict vault backup management permissions and enable supported security safeguards such as soft delete.
Explanation
Correct Answer
D:Role separation and recovery retention controls reduce accidental or malicious destruction of restore data. For that reason, restrict vault backup management permissions and enable supported security safeguards such as soft delete.
Incorrect Answers
A:Merely creating a vault does not enroll a protected VM or schedule backup jobs. In this situation, role separation and recovery retention controls reduce accidental or malicious destruction of restore data.
B:Stopping protection and deleting retained backup copies are separate lifecycle actions. However, role separation and recovery retention controls reduce accidental or malicious destruction of restore data.
C:Vault-scoped inventory and region determine which protected workload records are visible. Here, role separation and recovery retention controls reduce accidental or malicious destruction of restore data.
Question 339
A VM backup is reported successful but the business needs confidence that a specific database is recoverable to a defined RPO. Which response addresses the identified root cause without weakening other controls?
- Perform an application-aware database restore test, verify consistency, and confirm the restored data meets the specified recovery point objective (RPO).
- Choose the supported stop-backup option that retains backup data rather than deleting recovery points.
- Select a supported create-new-VM restore workflow using the intended recovery point and target network.
- Trigger and verify an on-demand backup or approved recovery point before the change.
Explanation
Correct Answer
A:A successful VM backup job alone does not prove how much database work can be recovered. A restore test must verify usable data consistency and that the recovery point is within the required data-loss window.
Incorrect Answers
B:Stopping protection and deleting retained backup copies are separate lifecycle actions. Here, a VM-level backup record alone does not prove the application can recover within business requirements.
C:A non-destructive alternate-instance restore preserves the original while permitting recovery testing. In this situation, a VM-level backup record alone does not prove the application can recover within business requirements.
D:An old successful job does not satisfy a current recovery point objective for imminent risky maintenance. However, a VM-level backup record alone does not prove the application can recover within business requirements.
Question 340
A team needs to restore one protected VM to a new Azure VM without overwriting the running original. Which configuration or recovery action best matches this evidence?
- Enable Azure VM backup for the VM using a suitable vault policy and confirm the first successful recovery point.
- Select a supported create-new-VM restore workflow using the intended recovery point and target network.
- Trigger and verify an on-demand backup or approved recovery point before the change.
- Perform an application-aware restore test and validate database consistency and recovery time.
Explanation
Correct Answer
B:A non-destructive alternate-instance restore preserves the original while permitting recovery testing. A suitable corrective action is to select a supported create-new-VM restore workflow using the intended recovery point and target network.
Incorrect Answers
A:Merely creating a vault does not enroll a protected VM or schedule backup jobs. Here, a non-destructive alternate-instance restore preserves the original while permitting recovery testing.
C:An old successful job does not satisfy a current recovery point objective for imminent risky maintenance. However, a non-destructive alternate-instance restore preserves the original while permitting recovery testing.
D:A VM-level backup record alone does not prove the application can recover within business requirements. Here, a non-destructive alternate-instance restore preserves the original while permitting recovery testing.
Configuring Windows Server Hybrid Advanced Services (AZ-801) Practice Tests