100% Latest & Updated Microsoft AZ-801 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 380
An ASR plan is modified to remove a database VM and staff assume the old successful test remains valid. Which implementation step directly corrects the underlying problem?
- Execute and validate an application-scoped recovery-plan test including dependent services.
- Rerun application-level test failover after the recovery-plan change.
- Configure the test failover target network and isolation mapping before running the exercise.
- Perform the supported test-failover cleanup after preserving results.
Explanation
Correct Answer
B:Prior verification applies to the tested plan version and cannot certify changed dependency scope. A suitable corrective action is to rerun application-level test failover after the recovery-plan change.
Incorrect Answers
A:Individual VM availability does not prove correct cross-service startup and connectivity. In this situation, prior verification applies to the tested plan version and cannot certify changed dependency scope.
C:Test failover should avoid conflicting IP, DNS and identity traffic with production. Here, prior verification applies to the tested plan version and cannot certify changed dependency scope.
D:Test resources are separate from normal replication state and need explicit cleanup. In this situation, prior verification applies to the tested plan version and cannot certify changed dependency scope.
Question 381
A planned Azure region failover is requested while the primary VM is online, but administrators do not account for synchronization and application shutdown. Which implementation step directly corrects the underlying problem?
- Initiate the approved unplanned ASR failover using a suitable available recovery point.
- Confirm healthy reprotection and acceptable synchronization before planned failback.
- Follow the supported planned failover workflow with final synchronization and application coordination.
- Reprotect the failed-over VM to establish the reverse replication path.
Explanation
Correct Answer
C:Planned switchover aims to minimize data loss by coordinating the accessible primary source. The targeted remedy is to follow the supported planned failover workflow with final synchronization and application coordination.
Incorrect Answers
A:During a hard outage, the primary source cannot supply fresh changes; recovery must use replicated points. However, planned switchover aims to minimize data loss by coordinating the accessible primary source.
B:A failed-over application becomes the new source and must be protected before reversing roles safely. Here, planned switchover aims to minimize data loss by coordinating the accessible primary source.
D:Failback requires a synchronized new source and target after the workload changes roles. However, planned switchover aims to minimize data loss by coordinating the accessible primary source.
Question 382
A regional outage makes the primary VM unavailable and the team tries to wait for final primary-side synchronization. Which supported action should be taken for this reported condition?
- Follow the supported planned failover workflow with final synchronization and application coordination.
- Select a recovery point class that meets the application's consistency and RPO requirements.
- Record end-to-end RTO/RPO, recovery-point selection and application validation for the drill.
- Initiate the approved unplanned ASR failover using a suitable available recovery point.
Explanation
Correct Answer
D:Initiate the approved unplanned ASR failover using a suitable available recovery point. This addresses the condition because during a hard outage, the primary source cannot supply fresh changes; recovery must use replicated points.
Incorrect Answers
A:Planned switchover aims to minimize data loss by coordinating the accessible primary source. Here, during a hard outage, the primary source cannot supply fresh changes; recovery must use replicated points.
B:Application-consistent checkpoints and crash-consistent snapshots offer different guarantees. In this situation, during a hard outage, the primary source cannot supply fresh changes; recovery must use replicated points.
C:Replication health measures data movement, not complete recovered service usability. However, during a hard outage, the primary source cannot supply fresh changes; recovery must use replicated points.
Question 383
An Azure VM is operating in the secondary region after failover, but no reverse replication has been configured before returning home. Which Windows Server or Azure operation best addresses the reported fault?
- Reprotect the failed-over VM to establish the reverse replication path.
- Confirm healthy reprotection and acceptable synchronization before planned failback.
- Follow the supported planned failover workflow with final synchronization and application coordination.
- Include identity and DNS dependency verification before declaring failover complete.
Explanation
Correct Answer
A:Failback requires a synchronized new source and target after the workload changes roles. For that reason, reprotect the failed-over VM to establish the reverse replication path.
Incorrect Answers
B:A failed-over application becomes the new source and must be protected before reversing roles safely. However, failback requires a synchronized new source and target after the workload changes roles.
C:Planned switchover aims to minimize data loss by coordinating the accessible primary source. Here, failback requires a synchronized new source and target after the workload changes roles.
D:Replicated disks are usable only when external authentication services also function. In this situation, failback requires a synchronized new source and target after the workload changes roles.
Question 384
A failover is initiated but the team has not committed the selected recovery point and wants to start normal operations. What should the administrator change first to correct this specific issue?
- Include identity and DNS dependency verification before declaring failover complete.
- Validate recovered application state and complete the supported commit step.
- Follow the supported planned failover workflow with final synchronization and application coordination.
- Select a recovery point class that meets the application's consistency and RPO requirements.
Explanation
Correct Answer
B:Validate recovered application state and complete the supported commit step. The underlying technical reason is that a failover selection must be confirmed before its chosen recovery point becomes the accepted operational state.
Incorrect Answers
A:Replicated disks are usable only when external authentication services also function. However, a failover selection must be confirmed before its chosen recovery point becomes the accepted operational state.
C:Planned switchover aims to minimize data loss by coordinating the accessible primary source. In this situation, a failover selection must be confirmed before its chosen recovery point becomes the accepted operational state.
D:Application-consistent checkpoints and crash-consistent snapshots offer different guarantees. However, a failover selection must be confirmed before its chosen recovery point becomes the accepted operational state.
Question 385
During failback, the original region's network access policy is still the broken configuration that caused the DR outage. What change should be prioritized to restore the intended behavior?
- Include identity and DNS dependency verification before declaring failover complete.
- Confirm healthy reprotection and acceptable synchronization before planned failback.
- Remediate and test original site dependencies before switching operations back.
- Initiate the approved unplanned ASR failover using a suitable available recovery point.
Explanation
Correct Answer
C:Reversing replication into an unrepaired destination recreates outage conditions. A suitable corrective action is to remediate and test original site dependencies before switching operations back.
Incorrect Answers
A:Replicated disks are usable only when external authentication services also function. Here, reversing replication into an unrepaired destination recreates outage conditions.
B:A failed-over application becomes the new source and must be protected before reversing roles safely. In this situation, reversing replication into an unrepaired destination recreates outage conditions.
D:During a hard outage, the primary source cannot supply fresh changes; recovery must use replicated points. Here, reversing replication into an unrepaired destination recreates outage conditions.
Question 386
A recovery runbook treats 'latest' and 'latest application-consistent' recovery points as interchangeable despite a database consistency requirement. Which supported action should be taken for this reported condition?
- Record end-to-end RTO/RPO, recovery-point selection and application validation for the drill.
- Initiate the approved unplanned ASR failover using a suitable available recovery point.
- Use the application recovery plan to recover all required dependent tiers together.
- Select a recovery point class that meets the application's consistency and RPO requirements.
Explanation
Correct Answer
D:Application-consistent checkpoints and crash-consistent snapshots offer different guarantees. The targeted remedy is to select a recovery point class that meets the application's consistency and RPO requirements.
Incorrect Answers
A:Replication health measures data movement, not complete recovered service usability. In this situation, application-consistent checkpoints and crash-consistent snapshots offer different guarantees.
B:During a hard outage, the primary source cannot supply fresh changes; recovery must use replicated points. However, application-consistent checkpoints and crash-consistent snapshots offer different guarantees.
C:Partial VM recovery can leave application dependency chains disconnected. Here, application-consistent checkpoints and crash-consistent snapshots offer different guarantees.
Question 387
A DR failover meets the recovery point objective but app owners cannot log in because target-region Entra/AD dependencies were not checked. What should the administrator change first to correct this specific issue?
- Include identity and DNS dependency verification before declaring failover complete.
- Validate recovered application state and complete the supported commit step.
- Follow the supported planned failover workflow with final synchronization and application coordination.
- Remediate and test original site dependencies before switching operations back.
Explanation
Correct Answer
A:Include identity and DNS dependency verification before declaring failover complete. This addresses the condition because replicated disks are usable only when external authentication services also function.
Incorrect Answers
B:A failover selection must be confirmed before its chosen recovery point becomes the accepted operational state. Here, replicated disks are usable only when external authentication services also function.
C:Planned switchover aims to minimize data loss by coordinating the accessible primary source. In this situation, replicated disks are usable only when external authentication services also function.
D:Reversing replication into an unrepaired destination recreates outage conditions. However, replicated disks are usable only when external authentication services also function.
Question 388
An operator fails over only one front-end VM, leaving its backend database serving from the isolated primary region. What is the best targeted remediation for the behavior described?
- Follow the supported planned failover workflow with final synchronization and application coordination.
- Use the application recovery plan to recover all required dependent tiers together.
- Initiate the approved unplanned ASR failover using a suitable available recovery point.
- Select a recovery point class that meets the application's consistency and RPO requirements.
Explanation
Correct Answer
B:Partial VM recovery can leave application dependency chains disconnected. For that reason, use the application recovery plan to recover all required dependent tiers together.
Incorrect Answers
A:Planned switchover aims to minimize data loss by coordinating the accessible primary source. Here, partial VM recovery can leave application dependency chains disconnected.
C:During a hard outage, the primary source cannot supply fresh changes; recovery must use replicated points. However, partial VM recovery can leave application dependency chains disconnected.
D:Application-consistent checkpoints and crash-consistent snapshots offer different guarantees. Here, partial VM recovery can leave application dependency chains disconnected.
Question 389
A team triggers failback before verifying the workload's reverse replication status and current protected recovery points. Which Windows Server or Azure operation best addresses the reported fault?
- Follow the supported planned failover workflow with final synchronization and application coordination.
- Reprotect the failed-over VM to establish the reverse replication path.
- Confirm healthy reprotection and acceptable synchronization before planned failback.
- Select a recovery point class that meets the application's consistency and RPO requirements.
Explanation
Correct Answer
C:Confirm healthy reprotection and acceptable synchronization before planned failback. The underlying technical reason is that a failed-over application becomes the new source and must be protected before reversing roles safely.
Incorrect Answers
A:Planned switchover aims to minimize data loss by coordinating the accessible primary source. In this situation, a failed-over application becomes the new source and must be protected before reversing roles safely.
B:Failback requires a synchronized new source and target after the workload changes roles. However, a failed-over application becomes the new source and must be protected before reversing roles safely.
D:Application-consistent checkpoints and crash-consistent snapshots offer different guarantees. In this situation, a failed-over application becomes the new source and must be protected before reversing roles safely.
Question 390
A postdisaster review reports ASR replication green but does not retain actual failover application success evidence. Which administrative change most directly resolves the documented failure?
- Select a recovery point class that meets the application's consistency and RPO requirements.
- Initiate the approved unplanned ASR failover using a suitable available recovery point.
- Use the application recovery plan to recover all required dependent tiers together.
- Record end-to-end RTO/RPO, recovery-point selection and application validation for the drill.
Explanation
Correct Answer
D:Replication health measures data movement, not complete recovered service usability. A suitable corrective action is to record end-to-end RTO/RPO, recovery-point selection and application validation for the drill.
Incorrect Answers
A:Application-consistent checkpoints and crash-consistent snapshots offer different guarantees. However, replication health measures data movement, not complete recovered service usability.
B:During a hard outage, the primary source cannot supply fresh changes; recovery must use replicated points. Here, replication health measures data movement, not complete recovered service usability.
C:Partial VM recovery can leave application dependency chains disconnected. In this situation, replication health measures data movement, not complete recovered service usability.
Configuring Windows Server Hybrid Advanced Services (AZ-801) Practice Tests