100% Latest & Updated Microsoft AZ-801 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 410
A primary Hyper-V VM is inaccessible and no recent replica recovery point exists due to months of replication failures. Which response addresses the identified root cause without weakening other controls?
- Use unplanned failover at the replica using the best available recovery point.
- Perform a Hyper-V Replica test failover to an isolated test instance.
- Reconfigure the replica test VM to an isolated test network before the drill.
- Assess actual available replica recovery points and restore from a tested backup if the replica cannot meet data requirements.
Explanation
Correct Answer
D:Replica configuration alone provides no guarantee of recoverability when data movement has stopped. A suitable corrective action is to assess actual available replica recovery points and restore from a tested backup if the replica cannot meet data requirements.
Incorrect Answers
A:Unplanned failover does not require primary participation but may lose changes after the selected point. Here, replica configuration alone provides no guarantee of recoverability when data movement has stopped.
B:Test failover creates a temporary replica VM while ordinary replication to the receiver continues. In this situation, replica configuration alone provides no guarantee of recoverability when data movement has stopped.
C:Test failover must avoid competing production identity or IP ownership. However, replica configuration alone provides no guarantee of recoverability when data movement has stopped.
Question 411
A busy SQL VM repeatedly shows replication backlog during peak transactions on a narrow branch link. Which administrative change most directly resolves the documented failure?
- Measure change rate, network throughput and replication health, then improve capacity or adjust permitted settings.
- Select a supported replication interval and network design based on measured change rate and RPO.
- Size target disk capacity and retention impact before enabling that VM's replication.
- Use the supported Hyper-V Replica Broker endpoint for cluster-hosted VM replication.
Explanation
Correct Answer
A:Replica backlog grows when VM writes exceed available replication throughput. The targeted remedy is to measure change rate, network throughput and replication health, then improve capacity or adjust permitted settings.
Incorrect Answers
B:Hyper-V Replica's periodic asynchronous model has recoverable-point gaps tied to interval and transport. However, replica backlog grows when VM writes exceed available replication throughput.
C:Replica data includes VM disks plus recovery point overhead and cannot be provisioned solely from the source size label. Here, replica backlog grows when VM writes exceed available replication throughput.
D:Cluster role movement changes node ownership, so stable broker configuration matters. In this situation, replica backlog grows when VM writes exceed available replication throughput.
Question 412
Hyper-V Replica is configured but all selected VMs show initial replication still pending after the source/receiver were connected. Which Windows Server or Azure operation best addresses the reported fault?
- Enable supported application-consistent recovery points and validate VSS in the guest.
- Complete the initial replication transfer using a supported method before relying on recovery points.
- Diagnose replication statistics and connection/retry status, then resynchronize if required.
- Use the supported Hyper-V Replica Broker endpoint for cluster-hosted VM replication.
Explanation
Correct Answer
B:Complete the initial replication transfer using a supported method before relying on recovery points. This addresses the condition because replication configuration is not useful for recovery until the first full copy is synchronized.
Incorrect Answers
A:VSS-aware recovery points give applications an opportunity to flush consistent state before copying it. However, replication configuration is not useful for recovery until the first full copy is synchronized.
C:Primary VM runtime health is independent of whether its disaster-recovery copy is current. In this situation, replication configuration is not useful for recovery until the first full copy is synchronized.
D:Cluster role movement changes node ownership, so stable broker configuration matters. However, replication configuration is not useful for recovery until the first full copy is synchronized.
Question 413
A replica VM has a previous recovery point but database restoration needs application-consistent checkpoint behavior. What should the administrator change first to correct this specific issue?
- Complete the initial replication transfer using a supported method before relying on recovery points.
- Perform an isolated application-level test failover and validate service/data integrity.
- Enable supported application-consistent recovery points and validate VSS in the guest.
- Correct the replica network mapping and confirm destination virtual switch membership.
Explanation
Correct Answer
C:VSS-aware recovery points give applications an opportunity to flush consistent state before copying it. For that reason, enable supported application-consistent recovery points and validate VSS in the guest.
Incorrect Answers
A:Replication configuration is not useful for recovery until the first full copy is synchronized. Here, vSS-aware recovery points give applications an opportunity to flush consistent state before copying it.
B:Hyper-V replication protects VM disk state, not automatically a proven application recovery sequence. In this situation, vSS-aware recovery points give applications an opportunity to flush consistent state before copying it.
D:A replicated VM's network adapter configuration must reference an available destination virtual switch. Here, vSS-aware recovery points give applications an opportunity to flush consistent state before copying it.
Question 414
A Hyper-V host displays replication health Warning after intermittent WAN loss and administrators ignore it because the VM is still Running. What should the administrator change first to correct this specific issue?
- Complete the initial replication transfer using a supported method before relying on recovery points.
- Use the supported Hyper-V Replica Broker endpoint for cluster-hosted VM replication.
- Inspect checkpoint and replication interactions, merge or resolve unnecessary checkpoints safely.
- Diagnose replication statistics and connection/retry status, then resynchronize if required.
Explanation
Correct Answer
D:Diagnose replication statistics and connection/retry status, then resynchronize if required. The underlying technical reason is that primary VM runtime health is independent of whether its disaster-recovery copy is current.
Incorrect Answers
A:Replication configuration is not useful for recovery until the first full copy is synchronized. In this situation, primary VM runtime health is independent of whether its disaster-recovery copy is current.
B:Cluster role movement changes node ownership, so stable broker configuration matters. However, primary VM runtime health is independent of whether its disaster-recovery copy is current.
C:Additional checkpoint processing can affect VM storage and replication operation. Here, primary VM runtime health is independent of whether its disaster-recovery copy is current.
Question 415
A newly enabled replica uses a frequency that cannot meet the application's stated low RPO given network latency. What should the administrator change first to correct this specific issue?
- Select a supported replication interval and network design based on measured change rate and RPO.
- Measure change rate, network throughput and replication health, then improve capacity or adjust permitted settings.
- Correct the replica network mapping and confirm destination virtual switch membership.
- Complete the initial replication transfer using a supported method before relying on recovery points.
Explanation
Correct Answer
A:Hyper-V Replica's periodic asynchronous model has recoverable-point gaps tied to interval and transport. A suitable corrective action is to select a supported replication interval and network design based on measured change rate and RPO.
Incorrect Answers
B:Replica backlog grows when VM writes exceed available replication throughput. Here, Hyper-V Replica's periodic asynchronous model has recoverable-point gaps tied to interval and transport.
C:A replicated VM's network adapter configuration must reference an available destination virtual switch. In this situation, Hyper-V Replica's periodic asynchronous model has recoverable-point gaps tied to interval and transport.
D:Replication configuration is not useful for recovery until the first full copy is synchronized. However, Hyper-V Replica's periodic asynchronous model has recoverable-point gaps tied to interval and transport.
Question 416
A VM has snapshot/checkpoint chains growing uncontrollably and replication latency worsens as backup software adds checkpoints. Which response addresses the identified root cause without weakening other controls?
- Use the supported Hyper-V Replica Broker endpoint for cluster-hosted VM replication.
- Inspect checkpoint and replication interactions, merge or resolve unnecessary checkpoints safely.
- Diagnose replication statistics and connection/retry status, then resynchronize if required.
- Select a supported replication interval and network design based on measured change rate and RPO.
Explanation
Correct Answer
B:Additional checkpoint processing can affect VM storage and replication operation. The targeted remedy is to inspect checkpoint and replication interactions, merge or resolve unnecessary checkpoints safely.
Incorrect Answers
A:Cluster role movement changes node ownership, so stable broker configuration matters. Here, additional checkpoint processing can affect VM storage and replication operation.
C:Primary VM runtime health is independent of whether its disaster-recovery copy is current. However, additional checkpoint processing can affect VM storage and replication operation.
D:Hyper-V Replica's periodic asynchronous model has recoverable-point gaps tied to interval and transport. Here, additional checkpoint processing can affect VM storage and replication operation.
Question 417
A replica appears healthy at the host level but its guest application needs SQL recovery; the team has never tested application startup. Which Windows Server or Azure operation best addresses the reported fault?
- Enable supported application-consistent recovery points and validate VSS in the guest.
- Select a supported replication interval and network design based on measured change rate and RPO.
- Perform an isolated application-level test failover and validate service/data integrity.
- Measure change rate, network throughput and replication health, then improve capacity or adjust permitted settings.
Explanation
Correct Answer
C:Perform an isolated application-level test failover and validate service/data integrity. This addresses the condition because hyper-V replication protects VM disk state, not automatically a proven application recovery sequence.
Incorrect Answers
A:VSS-aware recovery points give applications an opportunity to flush consistent state before copying it. In this situation, Hyper-V replication protects VM disk state, not automatically a proven application recovery sequence.
B:Hyper-V Replica's periodic asynchronous model has recoverable-point gaps tied to interval and transport. However, Hyper-V replication protects VM disk state, not automatically a proven application recovery sequence.
D:Replica backlog grows when VM writes exceed available replication throughput. In this situation, Hyper-V replication protects VM disk state, not automatically a proven application recovery sequence.
Question 418
A changed Hyper-V virtual network name prevents the test replica VM from connecting to its intended DR network. Which administrative change most directly resolves the documented failure?
- Select a supported replication interval and network design based on measured change rate and RPO.
- Enable supported application-consistent recovery points and validate VSS in the guest.
- Use the supported Hyper-V Replica Broker endpoint for cluster-hosted VM replication.
- Correct the replica network mapping and confirm destination virtual switch membership.
Explanation
Correct Answer
D:A replicated VM's network adapter configuration must reference an available destination virtual switch. For that reason, correct the replica network mapping and confirm destination virtual switch membership.
Incorrect Answers
A:Hyper-V Replica's periodic asynchronous model has recoverable-point gaps tied to interval and transport. However, a replicated VM's network adapter configuration must reference an available destination virtual switch.
B:VSS-aware recovery points give applications an opportunity to flush consistent state before copying it. Here, a replicated VM's network adapter configuration must reference an available destination virtual switch.
C:Cluster role movement changes node ownership, so stable broker configuration matters. In this situation, a replicated VM's network adapter configuration must reference an available destination virtual switch.
Question 419
A replicated VM was moved between cluster nodes and replication unexpectedly stopped because the broker identity was bypassed. Which response addresses the identified root cause without weakening other controls?
- Use the supported Hyper-V Replica Broker endpoint for cluster-hosted VM replication.
- Size target disk capacity and retention impact before enabling that VM's replication.
- Correct the replica network mapping and confirm destination virtual switch membership.
- Complete the initial replication transfer using a supported method before relying on recovery points.
Explanation
Correct Answer
A:Use the supported Hyper-V Replica Broker endpoint for cluster-hosted VM replication. The underlying technical reason is that cluster role movement changes node ownership, so stable broker configuration matters.
Incorrect Answers
B:Replica data includes VM disks plus recovery point overhead and cannot be provisioned solely from the source size label. In this situation, cluster role movement changes node ownership, so stable broker configuration matters.
C:A replicated VM's network adapter configuration must reference an available destination virtual switch. However, cluster role movement changes node ownership, so stable broker configuration matters.
D:Replication configuration is not useful for recovery until the first full copy is synchronized. Here, cluster role movement changes node ownership, so stable broker configuration matters.
Question 420
A team wants to add an unprotected critical VM but the destination lacks capacity for its VHDX and retention points. What change should be prioritized to restore the intended behavior?
- Use the supported Hyper-V Replica Broker endpoint for cluster-hosted VM replication.
- Size target disk capacity and retention impact before enabling that VM's replication.
- Measure change rate, network throughput and replication health, then improve capacity or adjust permitted settings.
- Diagnose replication statistics and connection/retry status, then resynchronize if required.
Explanation
Correct Answer
B:Replica data includes VM disks plus recovery point overhead and cannot be provisioned solely from the source size label. A suitable corrective action is to size target disk capacity and retention impact before enabling that VM's replication.
Incorrect Answers
A:Cluster role movement changes node ownership, so stable broker configuration matters. In this situation, replica data includes VM disks plus recovery point overhead and cannot be provisioned solely from the source size label.
C:Replica backlog grows when VM writes exceed available replication throughput. Here, replica data includes VM disks plus recovery point overhead and cannot be provisioned solely from the source size label.
D:Primary VM runtime health is independent of whether its disaster-recovery copy is current. In this situation, replica data includes VM disks plus recovery point overhead and cannot be provisioned solely from the source size label.
Configuring Windows Server Hybrid Advanced Services (AZ-801) Practice Tests