Microsoft SC-200 Exam Dumps, Practice Test Questions

100% Latest & Updated Microsoft SC-200 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Microsoft SC-200 Premium Bundle
$79.97
$59.98

SC-200 Premium Bundle

  • Premium File: 499 Questions & Answers. Last update: Nov 2, 2026
  • Training Course: 47 Video Lectures
  • Study Guide: 441 Pages
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

SC-200 Premium Bundle

Microsoft SC-200 Premium Bundle
  • Premium File: 499 Questions & Answers. Last update: Nov 2, 2026
  • Training Course: 47 Video Lectures
  • Study Guide: 441 Pages
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$79.97
$59.98

Microsoft SC-200 Practice Test 28

Question 270

The same verified malicious file hash is repeatedly downloaded on managed endpoints after remediation. The proposed configuration is: Create the supported Defender for Endpoint file indicator with Block action for the confirmed malicious hash. Which operational step implements the chosen approach?

  1. Start a collect investigation package action for the identified device and retrieve it through the approved portal workflow.
  2. Register the verified hash and action with applicable device-group coverage and allowed indicator policy.
  3. Open an authorized device Live Response session, inspect the task and remove the verified malicious artifact with supported procedures.
  4. Inspect evidence and proposed action against the device group policy, then approve only the validated remediation.

Explanation

Correct Answer

B:

An indicator should target the malicious artifact, not a broad benign family.

Incorrect Answers

A:

Precise device selection and analyst permissions protect evidence scope. The scenario calls for blocking a known malicious file indicator, not that separate action.

C:

A responder should not delete unknown tasks without validating ownership. That is relevant to removing endpoint persistence with live response, whereas this requirement concerns blocking a known malicious file indicator.

D:

Approval scope must match the affected sensitive server. It does not establish blocking a known malicious file indicator, which is the specific issue in this case.

Question 271

The same verified malicious file hash is repeatedly downloaded on managed endpoints after remediation. The security team selected: Create the supported Defender for Endpoint file indicator with Block action for the confirmed malicious hash. Which TWO actions together implement this solution and verify the desired outcome? Choose TWO.

  1. Test the blocked file in an isolated approved environment and verify an indicator-enforced prevention event.
  2. Investigate the Defender for Endpoint device timeline and process tree to establish how the script was launched.
  3. Select the confirmed compromised device and initiate isolation with authorization and documented business impact.
  4. Generate a supported harmless test event and confirm fresh timeline telemetry appears after recovery.
  5. Register the verified hash and action with applicable device-group coverage and allowed indicator policy.

Explanation

Correct Answers

A:

Blocked execution evidence is stronger than a UI rule listing.

E:

An indicator should target the malicious artifact, not a broad benign family.

Incorrect Answers

B:

Process and network timeline evidence helps distinguish malicious execution from normal administration. That is relevant to tracing suspicious endpoint process ancestry, whereas this requirement concerns blocking a known malicious file indicator.

C:

Containment must not be applied to the wrong device or unnecessary scope. It does not establish blocking a known malicious file indicator, which is the specific issue in this case.

D:

New timestamps show ingestion resumed. The scenario calls for blocking a known malicious file indicator, not that separate action.

Question 272

The same verified malicious file hash is repeatedly downloaded on managed endpoints after remediation. The control has been deployed. Which ongoing control best addresses the risk that the protection may become ineffective?

  1. Monitor sensor telemetry gaps after device updates that affect process attribution.
  2. Preserve package hashes, access logs and chain-of-custody metadata through handoff.
  3. Review indicator expiry and false positives when vendors release legitimate versions.
  4. Review isolation status until recovery and formally authorize the release after remediation.

Explanation

Correct Answer

C:

An indefinite broad indicator can eventually interfere with authorized files.

Incorrect Answers

A:

Missing parent process data can break later investigations. That is relevant to tracing suspicious endpoint process ancestry, whereas this requirement concerns blocking a known malicious file indicator.

B:

Forensic integrity matters during later incident review. It does not establish blocking a known malicious file indicator, which is the specific issue in this case.

D:

Leaving hosts isolated indefinitely can cause operational incidents. That addresses isolating a compromised endpoint during response, not the stated need for blocking a known malicious file indicator.

Question 273

Defender for Endpoint recommends automated cleanup on a regulated server, but the server group requires analyst approval. What should the administrator configure to address this exact situation?

  1. Use the device group's configured automation level and review its pending remediation action in the Action center.
  2. Use Defender XDR incident action history and endpoint response status to identify automatic disruption actions.
  3. Correlate device timelines and remote-connection evidence to identify the actual lateral-movement destination hosts.
  4. Diagnose Defender for Endpoint sensor and device health before interpreting missing telemetry as clean activity.

Explanation

Correct Answer

A:

High-impact servers can require confirmation before automation proceeds.

Incorrect Answers

B:

Response provenance clarifies why the host was contained and what review is required. The scenario calls for approving an endpoint automated remediation action, not that separate action.

C:

Device evidence identifies which peers may need containment rather than assuming a whole subnet is compromised. That addresses scoping lateral movement from endpoint evidence, not the stated need for approving an endpoint automated remediation action.

D:

A silent device can have an onboarded but nonfunctional sensor. That is relevant to restoring endpoint sensor health for investigations, whereas this requirement concerns approving an endpoint automated remediation action.

Question 274

Defender for Endpoint recommends automated cleanup on a regulated server, but the server group requires analyst approval. The control design uses: Use the device group's configured automation level and review its pending remediation action in the Action center. Which operational step implements the chosen approach?

  1. Inspect evidence and proposed action against the device group policy, then approve only the validated remediation.
  2. Inspect the incident's automated action record, initiating protection and affected device identity before release.
  3. Select the confirmed compromised device and initiate isolation with authorization and documented business impact.
  4. Inspect source process and outbound connections with corresponding events on destination hosts.

Explanation

Correct Answer

A:

Approval scope must match the affected sensitive server.

Incorrect Answers

B:

Containment reversal must follow the actual action source and incident state. That addresses auditing endpoint attack-disruption action provenance, not the stated need for approving an endpoint automated remediation action.

C:

Containment must not be applied to the wrong device or unnecessary scope. That is relevant to isolating a compromised endpoint during response, whereas this requirement concerns approving an endpoint automated remediation action.

D:

Two-sided event correlation distinguishes successful access from merely attempted connections. It does not establish approving an endpoint automated remediation action, which is the specific issue in this case.

Question 275

Defender for Endpoint recommends automated cleanup on a regulated server, but the server group requires analyst approval. The control being evaluated is: Use the device group's configured automation level and review its pending remediation action in the Action center. What outcome would best validate the implementation?

  1. Test the blocked file in an isolated approved environment and verify an indicator-enforced prevention event.
  2. Confirm the approved remediation action completed and no unrelated device was changed.
  3. Verify affected device counts decrease after the patched version is deployed and re-scanned.
  4. Confirm the task no longer runs after reboot and the malicious binary or command is absent.

Explanation

Correct Answer

B:

A pending item is not evidence that an action ran.

Incorrect Answers

A:

Blocked execution evidence is stronger than a UI rule listing. That addresses blocking a known malicious file indicator, not the stated need for approving an endpoint automated remediation action.

C:

A recorded maintenance task alone does not prove vulnerability reduction. It does not establish approving an endpoint automated remediation action, which is the specific issue in this case.

D:

Persistence removal requires a post-restart test. The scenario calls for approving an endpoint automated remediation action, not that separate action.

Question 276

Defender for Endpoint recommends automated cleanup on a regulated server, but the server group requires analyst approval. Six months after deployment, the system has changed. Which ongoing control best addresses the risk that the protection may become ineffective?

  1. Review disruption prerequisites and release approvals during regular incident procedure testing.
  2. Review server group membership and automation levels after provisioning changes.
  3. Monitor newly affected peers and isolate confirmed compromised devices according to incident priorities.
  4. Alert on devices with stale last-seen times and investigate sensor health regressions.

Explanation

Correct Answer

B:

A moved server can inherit an unintended response setting.

Incorrect Answers

A:

Unclear ownership can delay recovery from automatic isolation. That is relevant to auditing endpoint attack-disruption action provenance, whereas this requirement concerns approving an endpoint automated remediation action.

C:

Lateral movement can continue while initial devices are being restored. The scenario calls for approving an endpoint automated remediation action, not that separate action.

D:

Telemetry gaps should not be treated as lack of threats. That addresses restoring endpoint sensor health for investigations, not the stated need for approving an endpoint automated remediation action.

Question 277

A security dashboard flags an exploitable unpatched browser vulnerability across devices in an executive department. What should the administrator configure to address this exact situation?

  1. Correlate device timelines and remote-connection evidence to identify the actual lateral-movement destination hosts.
  2. Use Defender XDR incident action history and endpoint response status to identify automatic disruption actions.
  3. Use Defender Vulnerability Management findings to prioritize affected devices and software remediation by risk.
  4. Diagnose Defender for Endpoint sensor and device health before interpreting missing telemetry as clean activity.

Explanation

Correct Answer

C:

Exposure information can identify the affected software and the extent of a missing security update.

Incorrect Answers

A:

Device evidence identifies which peers may need containment rather than assuming a whole subnet is compromised. It does not establish using exposure evidence to prioritize endpoint remediation, which is the specific issue in this case.

B:

Response provenance clarifies why the host was contained and what review is required. The scenario calls for using exposure evidence to prioritize endpoint remediation, not that separate action.

D:

A silent device can have an onboarded but nonfunctional sensor. That is relevant to restoring endpoint sensor health for investigations, whereas this requirement concerns using exposure evidence to prioritize endpoint remediation.

Question 278

A security dashboard flags an exploitable unpatched browser vulnerability across devices in an executive department. The planned solution is: Use Defender Vulnerability Management findings to prioritize affected devices and software remediation by risk. Which operational step implements the chosen approach?

  1. Register the verified hash and action with applicable device-group coverage and allowed indicator policy.
  2. Review the vulnerable product version, device inventory and recommended security update before assigning remediation.
  3. Open an authorized device Live Response session, inspect the task and remove the verified malicious artifact with supported procedures.
  4. Inspect the incident's automated action record, initiating protection and affected device identity before release.

Explanation

Correct Answer

B:

Risk prioritization should consider actual exposure rather than only CVE headline severity.

Incorrect Answers

A:

An indicator should target the malicious artifact, not a broad benign family. The scenario calls for using exposure evidence to prioritize endpoint remediation, not that separate action.

C:

A responder should not delete unknown tasks without validating ownership. That is relevant to removing endpoint persistence with live response, whereas this requirement concerns using exposure evidence to prioritize endpoint remediation.

D:

Containment reversal must follow the actual action source and incident state. It does not establish using exposure evidence to prioritize endpoint remediation, which is the specific issue in this case.

Question 279

A security dashboard flags an exploitable unpatched browser vulnerability across devices in an executive department. The deployed approach is: Use Defender Vulnerability Management findings to prioritize affected devices and software remediation by risk. What outcome would best validate the implementation?

  1. Test the blocked file in an isolated approved environment and verify an indicator-enforced prevention event.
  2. Verify affected device counts decrease after the patched version is deployed and re-scanned.
  3. Confirm the task no longer runs after reboot and the malicious binary or command is absent.
  4. Confirm the investigation package contains expected diagnostic components and correlates with the device and time window.

Explanation

Correct Answer

B:

A recorded maintenance task alone does not prove vulnerability reduction.

Incorrect Answers

A:

Blocked execution evidence is stronger than a UI rule listing. That addresses blocking a known malicious file indicator, not the stated need for using exposure evidence to prioritize endpoint remediation.

C:

Persistence removal requires a post-restart test. It does not establish using exposure evidence to prioritize endpoint remediation, which is the specific issue in this case.

D:

A successful submission is not the same as obtaining useful evidence. The scenario calls for using exposure evidence to prioritize endpoint remediation, not that separate action.

Question 280

A security dashboard flags an exploitable unpatched browser vulnerability across devices in an executive department. The control is active. Which ongoing control best addresses the risk that the protection may become ineffective?

  1. Monitor sensor telemetry gaps after device updates that affect process attribution.
  2. Preserve package hashes, access logs and chain-of-custody metadata through handoff.
  3. Review isolation status until recovery and formally authorize the release after remediation.
  4. Monitor newly vulnerable devices and exceptions after application rollouts.

Explanation

Correct Answer

D:

Partial patches can leave old vulnerable versions in the fleet.

Incorrect Answers

A:

Missing parent process data can break later investigations. That is relevant to tracing suspicious endpoint process ancestry, whereas this requirement concerns using exposure evidence to prioritize endpoint remediation.

B:

Forensic integrity matters during later incident review. It does not establish using exposure evidence to prioritize endpoint remediation, which is the specific issue in this case.

C:

Leaving hosts isolated indefinitely can cause operational incidents. The scenario calls for using exposure evidence to prioritize endpoint remediation, not that separate action.

Microsoft Security Operations Analyst (SC-200) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.