100% Latest & Updated Microsoft SC-200 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 280
A security dashboard flags an exploitable unpatched browser vulnerability across devices in an executive department. The control is active. Which ongoing control best addresses the risk that the protection may become ineffective?
- Monitor sensor telemetry gaps after device updates that affect process attribution.
- Preserve package hashes, access logs and chain-of-custody metadata through handoff.
- Review isolation status until recovery and formally authorize the release after remediation.
- Monitor newly vulnerable devices and exceptions after application rollouts.
Explanation
Correct Answer
D:Partial patches can leave old vulnerable versions in the fleet.
Incorrect Answers
A:Missing parent process data can break later investigations. That is relevant to tracing suspicious endpoint process ancestry, whereas this requirement concerns using exposure evidence to prioritize endpoint remediation.
B:Forensic integrity matters during later incident review. It does not establish using exposure evidence to prioritize endpoint remediation, which is the specific issue in this case.
C:Leaving hosts isolated indefinitely can cause operational incidents. The scenario calls for using exposure evidence to prioritize endpoint remediation, not that separate action.
Question 281
A Microsoft Defender for Endpoint security alert has no recent device timeline data because the endpoint sensor stopped reporting. What should the administrator configure to address this exact situation?
- Collect an investigation package from the affected device using Defender for Endpoint's supported response action.
- Create the supported Defender for Endpoint file indicator with Block action for the confirmed malicious hash.
- Diagnose Defender for Endpoint sensor and device health before interpreting missing telemetry as clean activity.
- Use Defender for Endpoint Live Response under authorized commands to inspect and remove confirmed malicious persistence.
Explanation
Correct Answer
C:A silent device can have an onboarded but nonfunctional sensor.
Incorrect Answers
A:Investigation packages provide forensic artifacts without performing destructive remediation. It does not establish restoring endpoint sensor health for investigations, which is the specific issue in this case.
B:A scoped file indicator can stop known malicious content before another execution. The scenario calls for restoring endpoint sensor health for investigations, not that separate action.
D:Live Response can support supported remote investigation and remediation actions. That is relevant to removing endpoint persistence with live response, whereas this requirement concerns restoring endpoint sensor health for investigations.
Question 282
A Microsoft Defender for Endpoint security alert has no recent device timeline data because the endpoint sensor stopped reporting. The team has selected: Diagnose Defender for Endpoint sensor and device health before interpreting missing telemetry as clean activity. Which operational step implements the chosen approach?
- Inspect evidence and proposed action against the device group policy, then approve only the validated remediation.
- Review the vulnerable product version, device inventory and recommended security update before assigning remediation.
- Check device health, onboarding and service status on the named endpoint, then remediate the reporting path.
- Inspect source process and outbound connections with corresponding events on destination hosts.
Explanation
Correct Answer
C:Evidence coverage depends on the functioning sensor and network connectivity.
Incorrect Answers
A:Approval scope must match the affected sensitive server. The scenario calls for restoring endpoint sensor health for investigations, not that separate action.
B:Risk prioritization should consider actual exposure rather than only CVE headline severity. That addresses using exposure evidence to prioritize endpoint remediation, not the stated need for restoring endpoint sensor health for investigations.
D:Two-sided event correlation distinguishes successful access from merely attempted connections. It does not establish restoring endpoint sensor health for investigations, which is the specific issue in this case.
Question 283
A Microsoft Defender for Endpoint security alert has no recent device timeline data because the endpoint sensor stopped reporting. The team implements: Diagnose Defender for Endpoint sensor and device health before interpreting missing telemetry as clean activity. What outcome would best validate the implementation?
- Verify the device shows isolated state and ordinary outbound connections are blocked.
- Confirm matching timestamps, process IDs and destination evidence support the suspected execution chain.
- Generate a supported harmless test event and confirm fresh timeline telemetry appears after recovery.
- Confirm the investigation package contains expected diagnostic components and correlates with the device and time window.
Explanation
Correct Answer
C:New timestamps show ingestion resumed.
Incorrect Answers
A:A clicked action alone does not prove containment completed. That addresses isolating a compromised endpoint during response, not the stated need for restoring endpoint sensor health for investigations.
B:Correlated device events can validate the alert's actual sequence. That is relevant to tracing suspicious endpoint process ancestry, whereas this requirement concerns restoring endpoint sensor health for investigations.
D:A successful submission is not the same as obtaining useful evidence. The scenario calls for restoring endpoint sensor health for investigations, not that separate action.
Question 284
A Microsoft Defender for Endpoint security alert has no recent device timeline data because the endpoint sensor stopped reporting. The setting is now in production. Which ongoing control best addresses the risk that the protection may become ineffective?
- Review disruption prerequisites and release approvals during regular incident procedure testing.
- Preserve package hashes, access logs and chain-of-custody metadata through handoff.
- Log live-response commands and ensure only approved responder roles can run destructive actions.
- Alert on devices with stale last-seen times and investigate sensor health regressions.
Explanation
Correct Answer
D:Telemetry gaps should not be treated as lack of threats.
Incorrect Answers
A:Unclear ownership can delay recovery from automatic isolation. That is relevant to auditing endpoint attack-disruption action provenance, whereas this requirement concerns restoring endpoint sensor health for investigations.
B:Forensic integrity matters during later incident review. It does not establish restoring endpoint sensor health for investigations, which is the specific issue in this case.
C:Remote response permissions are security-sensitive. The scenario calls for restoring endpoint sensor health for investigations, not that separate action.
Question 285
A compromised endpoint launches remote administration activity on several peers shortly before ransomware encryption begins. What should the administrator configure to address this exact situation?
- Use Defender for Endpoint Live Response under authorized commands to inspect and remove confirmed malicious persistence.
- Create the supported Defender for Endpoint file indicator with Block action for the confirmed malicious hash.
- Correlate device timelines and remote-connection evidence to identify the actual lateral-movement destination hosts.
- Collect an investigation package from the affected device using Defender for Endpoint's supported response action.
Explanation
Correct Answer
C:Device evidence identifies which peers may need containment rather than assuming a whole subnet is compromised.
Incorrect Answers
A:Live Response can support supported remote investigation and remediation actions. It does not establish scoping lateral movement from endpoint evidence, which is the specific issue in this case.
B:A scoped file indicator can stop known malicious content before another execution. The scenario calls for scoping lateral movement from endpoint evidence, not that separate action.
D:Investigation packages provide forensic artifacts without performing destructive remediation. That is relevant to collecting an endpoint investigation package, whereas this requirement concerns scoping lateral movement from endpoint evidence.
Question 286
A compromised endpoint launches remote administration activity on several peers shortly before ransomware encryption begins. The project chooses: Correlate device timelines and remote-connection evidence to identify the actual lateral-movement destination hosts. Which operational step implements the chosen approach?
- Open an authorized device Live Response session, inspect the task and remove the verified malicious artifact with supported procedures.
- Start a collect investigation package action for the identified device and retrieve it through the approved portal workflow.
- Inspect source process and outbound connections with corresponding events on destination hosts.
- Register the verified hash and action with applicable device-group coverage and allowed indicator policy.
Explanation
Correct Answer
C:Two-sided event correlation distinguishes successful access from merely attempted connections.
Incorrect Answers
A:A responder should not delete unknown tasks without validating ownership. The scenario calls for scoping lateral movement from endpoint evidence, not that separate action.
B:Precise device selection and analyst permissions protect evidence scope. That addresses collecting an endpoint investigation package, not the stated need for scoping lateral movement from endpoint evidence.
D:An indicator should target the malicious artifact, not a broad benign family. It does not establish scoping lateral movement from endpoint evidence, which is the specific issue in this case.
Question 287
A compromised endpoint launches remote administration activity on several peers shortly before ransomware encryption begins. The intended configuration is: Correlate device timelines and remote-connection evidence to identify the actual lateral-movement destination hosts. Which TWO actions together implement this solution and verify the desired outcome? Choose TWO.
- Collect an investigation package from the affected device using Defender for Endpoint's supported response action.
- Verify destination host process or sign-in artifacts align with the suspected remote administration action.
- Start a collect investigation package action for the identified device and retrieve it through the approved portal workflow.
- Inspect source process and outbound connections with corresponding events on destination hosts.
- Confirm the approved remediation action completed and no unrelated device was changed.
Explanation
Correct Answers
B:A network connection alone does not prove remote command execution.
D:Two-sided event correlation distinguishes successful access from merely attempted connections.
Incorrect Answers
A:Investigation packages provide forensic artifacts without performing destructive remediation. That addresses collecting an endpoint investigation package, not the stated need for scoping lateral movement from endpoint evidence.
C:Precise device selection and analyst permissions protect evidence scope. It does not establish scoping lateral movement from endpoint evidence, which is the specific issue in this case.
E:A pending item is not evidence that an action ran. That addresses approving an endpoint automated remediation action, not the stated need for scoping lateral movement from endpoint evidence.
Question 288
A compromised endpoint launches remote administration activity on several peers shortly before ransomware encryption begins. After rollout, the organization wants continuing assurance. Which ongoing control best addresses the risk that the protection may become ineffective?
- Review disruption prerequisites and release approvals during regular incident procedure testing.
- Alert on devices with stale last-seen times and investigate sensor health regressions.
- Review isolation status until recovery and formally authorize the release after remediation.
- Monitor newly affected peers and isolate confirmed compromised devices according to incident priorities.
Explanation
Correct Answer
D:Lateral movement can continue while initial devices are being restored.
Incorrect Answers
A:Unclear ownership can delay recovery from automatic isolation. That is relevant to auditing endpoint attack-disruption action provenance, whereas this requirement concerns scoping lateral movement from endpoint evidence.
B:Telemetry gaps should not be treated as lack of threats. It does not establish scoping lateral movement from endpoint evidence, which is the specific issue in this case.
C:Leaving hosts isolated indefinitely can cause operational incidents. The scenario calls for scoping lateral movement from endpoint evidence, not that separate action.
Question 289
Automatic attack disruption has isolated a device, and the incident responder needs to distinguish the automated action from a manual isolation request. What should the administrator configure to address this exact situation?
- Use Defender Vulnerability Management findings to prioritize affected devices and software remediation by risk.
- Diagnose Defender for Endpoint sensor and device health before interpreting missing telemetry as clean activity.
- Use the device group's configured automation level and review its pending remediation action in the Action center.
- Use Defender XDR incident action history and endpoint response status to identify automatic disruption actions.
Explanation
Correct Answer
D:Response provenance clarifies why the host was contained and what review is required.
Incorrect Answers
A:Exposure information can identify the affected software and the extent of a missing security update. It does not establish auditing endpoint attack-disruption action provenance, which is the specific issue in this case.
B:A silent device can have an onboarded but nonfunctional sensor. The scenario calls for auditing endpoint attack-disruption action provenance, not that separate action.
C:High-impact servers can require confirmation before automation proceeds. That addresses approving an endpoint automated remediation action, not the stated need for auditing endpoint attack-disruption action provenance.
Question 290
Automatic attack disruption has isolated a device, and the incident responder needs to distinguish the automated action from a manual isolation request. The proposed configuration is: Use Defender XDR incident action history and endpoint response status to identify automatic disruption actions. Which operational step implements the chosen approach?
- Review the vulnerable product version, device inventory and recommended security update before assigning remediation.
- Inspect source process and outbound connections with corresponding events on destination hosts.
- Check device health, onboarding and service status on the named endpoint, then remediate the reporting path.
- Inspect the incident's automated action record, initiating protection and affected device identity before release.
Explanation
Correct Answer
D:Containment reversal must follow the actual action source and incident state.
Incorrect Answers
A:Risk prioritization should consider actual exposure rather than only CVE headline severity. The scenario calls for auditing endpoint attack-disruption action provenance, not that separate action.
B:Two-sided event correlation distinguishes successful access from merely attempted connections. That addresses scoping lateral movement from endpoint evidence, not the stated need for auditing endpoint attack-disruption action provenance.
C:Evidence coverage depends on the functioning sensor and network connectivity. That is relevant to restoring endpoint sensor health for investigations, whereas this requirement concerns auditing endpoint attack-disruption action provenance.
Microsoft Security Operations Analyst (SC-200) Practice Tests