100% Latest & Updated Network Appliance NS0-165 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 520
An ONTAP iSCSI SVM has only one active data path even though the workload requires redundant host access. Choose TWO measures that together implement and verify a suitable solution for this ONTAP storage-administration situation. (Choose TWO.)
- Implement supported Fibre Channel zoning with precisely scoped initiator and target WWPN connectivity.
- Review IPspace membership and routing boundaries whenever new SVMs or tenant networks are added.
- Configure supported iSCSI target service, storage data LIFs and host initiator paths with appropriate network isolation.
- Attempt target login from both permitted and unapproved initiator identities while verifying switch network boundaries.
- Discover iSCSI targets from each approved initiator network and confirm redundant sessions and LUN visibility.
Explanation
Correct Answers
C:Configure supported iSCSI target service, storage data LIFs and host initiator paths with appropriate network isolation. Block storage connectivity needs protocol-enabled SVM services and reachable target LIFs, not just an IP address on the cluster. Insufficient iSCSI paths can create host downtime during routine controller or network maintenance.
E:Discover iSCSI targets from each approved initiator network and confirm redundant sessions and LUN visibility. Block storage connectivity needs protocol-enabled SVM services and reachable target LIFs, not just an IP address on the cluster.
Incorrect Answers
A:Implement supported Fibre Channel zoning with precisely scoped initiator and target WWPN connectivity. Block storage connectivity needs protocol-enabled SVM services and reachable target LIFs, not just an IP address on the cluster.
B:Review IPspace membership and routing boundaries whenever new SVMs or tenant networks are added. It tests ontap ipspaces and tenant routing separation, not iscsi svm lif target connectivity design.
D:Attempt target login from both permitted and unapproved initiator identities while verifying switch network boundaries.
Question 521
A host supports NVMe over TCP but administrators provision only a traditional SCSI LUN and expect NVMe discovery to show it. Which design choice most directly meets the stated requirement?
- Configure supported host multipath and ALUA awareness so I/O can transition among intended ONTAP SAN paths.
- Provision supported NVMe namespaces, subsystems, host NQNs and TCP-based paths consistent with the host stack.
- Inspect NVMe host NQNs, subsystem mappings, discovery controller paths and client stack compatibility.
- Apply appropriate SMB share permissions and filesystem security ACLs to the intended Windows principals.
Explanation
Correct Answer
B:Provision supported NVMe namespaces, subsystems, host NQNs and TCP-based paths consistent with the host stack. NVMe namespaces and NQN-based access use a distinct data model from SCSI LUNs and iSCSI initiators. Mixing SCSI and NVMe configuration concepts can leave an application with no discovered block storage.
Incorrect Answers
A:Configure supported host multipath and ALUA awareness so I/O can transition among intended ONTAP SAN paths. NVMe namespaces and NQN-based access use a distinct data model from SCSI LUNs and iSCSI initiators.
C:Inspect NVMe host NQNs, subsystem mappings, discovery controller paths and client stack compatibility. NVMe namespaces and NQN-based access use a distinct data model from SCSI LUNs and iSCSI initiators.
D:Apply appropriate SMB share permissions and filesystem security ACLs to the intended Windows principals. NVMe namespaces and NQN-based access use a distinct data model from SCSI LUNs and iSCSI initiators.
Question 522
A host supports NVMe over TCP but administrators provision only a traditional SCSI LUN and expect NVMe discovery to show it. Which evidence would BEST validate the intended outcome?
- Run controlled nvme discovery and namespace list tests while confirming intended authorization boundaries.
- Compare WWPNs and target sessions from both fabrics and verify host device discovery and stable multipath states.
- Exercise a controlled controller takeover and verify host I/O continuity, path states and recovery time.
- Run NVMe discovery and connect operations and verify namespace identification and redundant path handling on the host.
Explanation
Correct Answer
D:Run NVMe discovery and connect operations and verify namespace identification and redundant path handling on the host. NVMe namespaces and NQN-based access use a distinct data model from SCSI LUNs and iSCSI initiators.
Incorrect Answers
A:Run controlled nvme discovery and namespace list tests while confirming intended authorization boundaries.
B:Compare WWPNs and target sessions from both fabrics and verify host device discovery and stable multipath states. It tests fibre channel wwpn path discovery and lun visibility, not nvme over tcp namespace provisioning.
C:Exercise a controlled controller takeover and verify host I/O continuity, path states and recovery time. It tests host alua and multipath failover under takeover, not nvme over tcp namespace provisioning.
Question 523
A host supports NVMe over TCP but administrators provision only a traditional SCSI LUN and expect NVMe discovery to show it. What is the principal technical reason for the problem?
- iSCSI transport reachability does not establish identity authorization when CHAP rejects credentials.
- NVMe namespaces and NQN-based access use a distinct data model from SCSI LUNs and iSCSI initiators.
- NVMe access uses host and subsystem identity relationships separate from normal SCSI LUN mappings.
- Multi-protocol files carry a governing security style that determines how ONTAP evaluates cross-platform access.
Explanation
Correct Answer
B:NVMe namespaces and NQN-based access use a distinct data model from SCSI LUNs and iSCSI initiators. Mixing SCSI and NVMe configuration concepts can leave an application with no discovered block storage.
Incorrect Answers
A:iSCSI transport reachability does not establish identity authorization when CHAP rejects credentials. This explains iscsi chap authentication troubleshooting; it does not describe the limiting mechanism in nvme over tcp namespace provisioning presented by the scenario.
C:NVMe access uses host and subsystem identity relationships separate from normal SCSI LUN mappings. This explains nvme host connection and namespace loss analysis; it does not describe the limiting mechanism in nvme over tcp namespace provisioning presented by the scenario.
D:Multi-protocol files carry a governing security style that determines how ONTAP evaluates cross-platform access. This explains mixed smb nfs file security style choices; it does not describe the limiting mechanism in nvme over tcp namespace provisioning presented by the scenario.
Question 524
A host supports NVMe over TCP but administrators provision only a traditional SCSI LUN and expect NVMe discovery to show it. Which preventive measure should be monitored as the platform changes?
- Maintain NVMe host identity and supported stack compatibility records after upgrades.
- Maintain baseline client and protocol latency and failover tests following network upgrades.
- Maintain client-version support and directory service settings after NFS or OS upgrades.
- Maintain secret rotation runbooks and host inventory when changing SAN authentication.
Explanation
Correct Answer
A:Maintain NVMe host identity and supported stack compatibility records after upgrades. Mixing SCSI and NVMe configuration concepts can leave an application with no discovered block storage.
Incorrect Answers
B:Maintain baseline client and protocol latency and failover tests following network upgrades.
C:Maintain client-version support and directory service settings after NFS or OS upgrades.
D:Maintain secret rotation runbooks and host inventory when changing SAN authentication.
Question 525
A host supports NVMe over TCP but administrators provision only a traditional SCSI LUN and expect NVMe discovery to show it. Which adverse outcome is the MOST direct risk if the issue persists?
- Incomplete multipathing can create application outage despite fully redundant storage controllers.
- Mixing SCSI and NVMe configuration concepts can leave an application with no discovered block storage.
- An outdated NVMe host identity can stop storage discovery even when target IP paths remain healthy.
- Bypassing CHAP to resolve login failures can expose block storage to unauthorized initiators.
Explanation
Correct Answer
B:Mixing SCSI and NVMe configuration concepts can leave an application with no discovered block storage. This is a directly relevant trust, availability, cost, privacy, or data-quality consequence of nvme over tcp namespace provisioning. Underlying mechanism: NVMe namespaces and NQN-based access use a distinct data model from SCSI LUNs and iSCSI initiators.
Incorrect Answers
A:Incomplete multipathing can create application outage despite fully redundant storage controllers.
C:An outdated NVMe host identity can stop storage discovery even when target IP paths remain healthy.
D:Bypassing CHAP to resolve login failures can expose block storage to unauthorized initiators.
Question 526
A new ONTAP NVMe subsystem is created without defining appropriate host NQNs or reachable discovery transport. Which change should the team prioritize for this specific ONTAP workload?
- Inspect NVMe host NQNs, subsystem mappings, discovery controller paths and client stack compatibility.
- Configure supported host multipath and ALUA awareness so I/O can transition among intended ONTAP SAN paths.
- Check the supported CHAP mode, initiator and target identities, and synchronized secrets without disabling authentication.
- Provision supported NVMe namespaces, subsystems, host NQNs and TCP-based paths consistent with the host stack.
Explanation
Correct Answer
D:Provision supported NVMe namespaces, subsystems, host NQNs and TCP-based paths consistent with the host stack. NVMe namespaces and NQN-based access use a distinct data model from SCSI LUNs and iSCSI initiators. Mixing SCSI and NVMe configuration concepts can leave an application with no discovered block storage.
Incorrect Answers
A:Inspect NVMe host NQNs, subsystem mappings, discovery controller paths and client stack compatibility. NVMe namespaces and NQN-based access use a distinct data model from SCSI LUNs and iSCSI initiators.
B:Configure supported host multipath and ALUA awareness so I/O can transition among intended ONTAP SAN paths. NVMe namespaces and NQN-based access use a distinct data model from SCSI LUNs and iSCSI initiators.
C:Check the supported CHAP mode, initiator and target identities, and synchronized secrets without disabling authentication. NVMe namespaces and NQN-based access use a distinct data model from SCSI LUNs and iSCSI initiators.
Question 527
A new ONTAP NVMe subsystem is created without defining appropriate host NQNs or reachable discovery transport. Which test would most directly confirm the solution?
- Compare WWPNs and target sessions from both fabrics and verify host device discovery and stable multipath states.
- Exercise a controlled controller takeover and verify host I/O continuity, path states and recovery time.
- Run NVMe discovery and connect operations and verify namespace identification and redundant path handling on the host.
- Run controlled nvme discovery and namespace list tests while confirming intended authorization boundaries.
Explanation
Correct Answer
C:Run NVMe discovery and connect operations and verify namespace identification and redundant path handling on the host. NVMe namespaces and NQN-based access use a distinct data model from SCSI LUNs and iSCSI initiators.
Incorrect Answers
A:Compare WWPNs and target sessions from both fabrics and verify host device discovery and stable multipath states. It tests fibre channel wwpn path discovery and lun visibility, not nvme over tcp namespace provisioning.
B:Exercise a controlled controller takeover and verify host I/O continuity, path states and recovery time. It tests host alua and multipath failover under takeover, not nvme over tcp namespace provisioning.
D:Run controlled nvme discovery and namespace list tests while confirming intended authorization boundaries.
Question 528
A new ONTAP NVMe subsystem is created without defining appropriate host NQNs or reachable discovery transport. Why is the original assumption unreliable?
- Multi-protocol files carry a governing security style that determines how ONTAP evaluates cross-platform access.
- NVMe access uses host and subsystem identity relationships separate from normal SCSI LUN mappings.
- NVMe namespaces and NQN-based access use a distinct data model from SCSI LUNs and iSCSI initiators.
- iSCSI transport reachability does not establish identity authorization when CHAP rejects credentials.
Explanation
Correct Answer
C:NVMe namespaces and NQN-based access use a distinct data model from SCSI LUNs and iSCSI initiators. Mixing SCSI and NVMe configuration concepts can leave an application with no discovered block storage.
Incorrect Answers
A:Multi-protocol files carry a governing security style that determines how ONTAP evaluates cross-platform access. This explains mixed smb nfs file security style choices; it does not describe the limiting mechanism in nvme over tcp namespace provisioning presented by the scenario.
B:NVMe access uses host and subsystem identity relationships separate from normal SCSI LUN mappings. This explains nvme host connection and namespace loss analysis; it does not describe the limiting mechanism in nvme over tcp namespace provisioning presented by the scenario.
D:iSCSI transport reachability does not establish identity authorization when CHAP rejects credentials. This explains iscsi chap authentication troubleshooting; it does not describe the limiting mechanism in nvme over tcp namespace provisioning presented by the scenario.
Question 529
A new ONTAP NVMe subsystem is created without defining appropriate host NQNs or reachable discovery transport. Which preventive measure should be monitored as the platform changes?
- Maintain client-version support and directory service settings after NFS or OS upgrades.
- Maintain NVMe host identity and supported stack compatibility records after upgrades.
- Maintain secret rotation runbooks and host inventory when changing SAN authentication.
- Maintain baseline client and protocol latency and failover tests following network upgrades.
Explanation
Correct Answer
B:Maintain NVMe host identity and supported stack compatibility records after upgrades. Mixing SCSI and NVMe configuration concepts can leave an application with no discovered block storage.
Incorrect Answers
A:Maintain client-version support and directory service settings after NFS or OS upgrades.
C:Maintain secret rotation runbooks and host inventory when changing SAN authentication.
D:Maintain baseline client and protocol latency and failover tests following network upgrades.
Question 530
A new ONTAP NVMe subsystem is created without defining appropriate host NQNs or reachable discovery transport. Which adverse outcome is the MOST direct risk if the issue persists?
- Incomplete multipathing can create application outage despite fully redundant storage controllers.
- Bypassing CHAP to resolve login failures can expose block storage to unauthorized initiators.
- An outdated NVMe host identity can stop storage discovery even when target IP paths remain healthy.
- Mixing SCSI and NVMe configuration concepts can leave an application with no discovered block storage.
Explanation
Correct Answer
D:Mixing SCSI and NVMe configuration concepts can leave an application with no discovered block storage. This is a directly relevant trust, availability, cost, privacy, or data-quality consequence of nvme over tcp namespace provisioning. Underlying mechanism: NVMe namespaces and NQN-based access use a distinct data model from SCSI LUNs and iSCSI initiators.
Incorrect Answers
A:Incomplete multipathing can create application outage despite fully redundant storage controllers.
B:Bypassing CHAP to resolve login failures can expose block storage to unauthorized initiators.
C:An outdated NVMe host identity can stop storage discovery even when target IP paths remain healthy.
NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests