100% Latest & Updated Network Appliance NS0-165 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 510
A SAN team adds broad all-to-all zones that expose storage targets to unrelated initiators beyond the approved application set. Which result would BEST describe the business or technical exposure?
- Incorrect layered SMB permissions can cause client outages or leave sensitive files unexpectedly readable.
- A missed WWPN update can reduce SAN redundancy or make a critical LUN vanish during maintenance.
- Unexamined mixed file permissions can create silent overexposure or unexpected access denied errors.
- Incorrect zoning can hide critical LUNs or create unnecessarily broad SAN access.
Explanation
Correct Answer
D:Incorrect zoning can hide critical LUNs or create unnecessarily broad SAN access. This is a directly relevant trust, availability, cost, privacy, or data-quality consequence of fibre channel fabric zoning for ontap luns. Underlying mechanism: FC zoning controls which fabric endpoints can communicate before ONTAP LUN mapping determines which blocks are exposed.
Incorrect Answers
A:Incorrect layered SMB permissions can cause client outages or leave sensitive files unexpectedly readable.
B:A missed WWPN update can reduce SAN redundancy or make a critical LUN vanish during maintenance.
C:Unexamined mixed file permissions can create silent overexposure or unexpected access denied errors.
Question 511
A database host attempts iSCSI to a management-only LIF and sees no supported storage target on the network. What infrastructure or software action BEST resolves the stated issue?
- Configure supported host multipath and ALUA awareness so I/O can transition among intended ONTAP SAN paths.
- Correlate NAS session state, data LIF path, network errors, CPU and workload latency before tuning storage configuration.
- Check the supported CHAP mode, initiator and target identities, and synchronized secrets without disabling authentication.
- Configure supported iSCSI target service, storage data LIFs and host initiator paths with appropriate network isolation.
Explanation
Correct Answer
D:Configure supported iSCSI target service, storage data LIFs and host initiator paths with appropriate network isolation. Block storage connectivity needs protocol-enabled SVM services and reachable target LIFs, not just an IP address on the cluster. Insufficient iSCSI paths can create host downtime during routine controller or network maintenance.
Incorrect Answers
A:Configure supported host multipath and ALUA awareness so I/O can transition among intended ONTAP SAN paths. Block storage connectivity needs protocol-enabled SVM services and reachable target LIFs, not just an IP address on the cluster.
B:Correlate NAS session state, data LIF path, network errors, CPU and workload latency before tuning storage configuration. Block storage connectivity needs protocol-enabled SVM services and reachable target LIFs, not just an IP address on the cluster.
C:Check the supported CHAP mode, initiator and target identities, and synchronized secrets without disabling authentication. Block storage connectivity needs protocol-enabled SVM services and reachable target LIFs, not just an IP address on the cluster.
Question 512
A database host attempts iSCSI to a management-only LIF and sees no supported storage target on the network. How should the team verify that the corrective action works?
- Test mounting and file creation from both approved and denied client addresses, checking export rule evaluation.
- Compare WWPNs and target sessions from both fabrics and verify host device discovery and stable multipath states.
- Review initiator login diagnostics and verify only the authorized session authenticates with the expected target.
- Discover iSCSI targets from each approved initiator network and confirm redundant sessions and LUN visibility.
Explanation
Correct Answer
D:Discover iSCSI targets from each approved initiator network and confirm redundant sessions and LUN visibility. Block storage connectivity needs protocol-enabled SVM services and reachable target LIFs, not just an IP address on the cluster.
Incorrect Answers
A:Test mounting and file creation from both approved and denied client addresses, checking export rule evaluation.
B:Compare WWPNs and target sessions from both fabrics and verify host device discovery and stable multipath states. It tests fibre channel wwpn path discovery and lun visibility, not iscsi svm lif target connectivity design.
C:Review initiator login diagnostics and verify only the authorized session authenticates with the expected target. It tests iscsi chap authentication troubleshooting, not iscsi svm lif target connectivity design.
Question 513
A database host attempts iSCSI to a management-only LIF and sees no supported storage target on the network. Which concept is MOST relevant to the stated conditions?
- NAS latency spans client, protocol, network and storage layers and often cannot be explained from disk utilization alone.
- Block storage connectivity needs protocol-enabled SVM services and reachable target LIFs, not just an IP address on the cluster.
- SAN availability depends jointly on storage HA and host multipathing interpretation of optimized target paths.
- SMB Kerberos authentication depends on directory and SPN identity integrity apart from storage volume health.
Explanation
Correct Answer
B:Block storage connectivity needs protocol-enabled SVM services and reachable target LIFs, not just an IP address on the cluster. Insufficient iSCSI paths can create host downtime during routine controller or network maintenance.
Incorrect Answers
A:NAS latency spans client, protocol, network and storage layers and often cannot be explained from disk utilization alone. This explains nas latency and session instability diagnosis; it does not describe the limiting mechanism in iscsi svm lif target connectivity design presented by the scenario.
C:SAN availability depends jointly on storage HA and host multipathing interpretation of optimized target paths. This explains host alua and multipath failover under takeover; it does not describe the limiting mechanism in iscsi svm lif target connectivity design presented by the scenario.
D:SMB Kerberos authentication depends on directory and SPN identity integrity apart from storage volume health. This explains smb domain join and kerberos name resolution failures; it does not describe the limiting mechanism in iscsi svm lif target connectivity design presented by the scenario.
Question 514
A database host attempts iSCSI to a management-only LIF and sees no supported storage target on the network. Which ongoing practice would BEST prevent recurrence?
- Review iSCSI target and route configuration when introducing new initiator subnets.
- Review NFS export policy entries whenever application client subnets or Kerberos requirements change.
- Review NQN registration and subsystem membership after host image or adapter replacement.
- Document identity mappings and security-style assumptions when new clients join the shared namespace.
Explanation
Correct Answer
A:Review iSCSI target and route configuration when introducing new initiator subnets. Insufficient iSCSI paths can create host downtime during routine controller or network maintenance.
Incorrect Answers
B:Review NFS export policy entries whenever application client subnets or Kerberos requirements change.
C:Review NQN registration and subsystem membership after host image or adapter replacement. It tests nvme host connection and namespace loss analysis, not iscsi svm lif target connectivity design.
D:Document identity mappings and security-style assumptions when new clients join the shared namespace.
Question 515
A database host attempts iSCSI to a management-only LIF and sees no supported storage target on the network. What failure consequence should the organization prioritize?
- Unexamined mixed file permissions can create silent overexposure or unexpected access denied errors.
- A missed WWPN update can reduce SAN redundancy or make a critical LUN vanish during maintenance.
- Insufficient iSCSI paths can create host downtime during routine controller or network maintenance.
- Changing network routing alone cannot fix NFS authorization failures and may create broader exposure.
Explanation
Correct Answer
C:Insufficient iSCSI paths can create host downtime during routine controller or network maintenance. This is a directly relevant trust, availability, cost, privacy, or data-quality consequence of iscsi svm lif target connectivity design. Underlying mechanism: Block storage connectivity needs protocol-enabled SVM services and reachable target LIFs, not just an IP address on the cluster.
Incorrect Answers
A:Unexamined mixed file permissions can create silent overexposure or unexpected access denied errors. It tests mixed smb nfs file security style choices, not iscsi svm lif target connectivity design and produces a different.
B:A missed WWPN update can reduce SAN redundancy or make a critical LUN vanish during maintenance. It tests fibre channel wwpn path discovery and lun visibility, not iscsi svm lif target connectivity design and produces a different.
D:Changing network routing alone cannot fix NFS authorization failures and may create broader exposure.
Question 516
An ONTAP iSCSI SVM has only one active data path even though the workload requires redundant host access. What is the MOST appropriate solution under these constraints?
- Correlate NAS session state, data LIF path, network errors, CPU and workload latency before tuning storage configuration.
- Check the supported CHAP mode, initiator and target identities, and synchronized secrets without disabling authentication.
- Configure supported iSCSI target service, storage data LIFs and host initiator paths with appropriate network isolation.
- Configure supported host multipath and ALUA awareness so I/O can transition among intended ONTAP SAN paths.
Explanation
Correct Answer
C:Configure supported iSCSI target service, storage data LIFs and host initiator paths with appropriate network isolation. Block storage connectivity needs protocol-enabled SVM services and reachable target LIFs, not just an IP address on the cluster. Insufficient iSCSI paths can create host downtime during routine controller or network maintenance.
Incorrect Answers
A:Correlate NAS session state, data LIF path, network errors, CPU and workload latency before tuning storage configuration. Block storage connectivity needs protocol-enabled SVM services and reachable target LIFs, not just an IP address on the cluster.
B:Check the supported CHAP mode, initiator and target identities, and synchronized secrets without disabling authentication. Block storage connectivity needs protocol-enabled SVM services and reachable target LIFs, not just an IP address on the cluster.
D:Configure supported host multipath and ALUA awareness so I/O can transition among intended ONTAP SAN paths. Block storage connectivity needs protocol-enabled SVM services and reachable target LIFs, not just an IP address on the cluster.
Question 517
An ONTAP iSCSI SVM has only one active data path even though the workload requires redundant host access. What observable result would establish that the requirement is met?
- Review initiator login diagnostics and verify only the authorized session authenticates with the expected target.
- Compare WWPNs and target sessions from both fabrics and verify host device discovery and stable multipath states.
- Test mounting and file creation from both approved and denied client addresses, checking export rule evaluation.
- Discover iSCSI targets from each approved initiator network and confirm redundant sessions and LUN visibility.
Explanation
Correct Answer
D:Discover iSCSI targets from each approved initiator network and confirm redundant sessions and LUN visibility. Block storage connectivity needs protocol-enabled SVM services and reachable target LIFs, not just an IP address on the cluster.
Incorrect Answers
A:Review initiator login diagnostics and verify only the authorized session authenticates with the expected target. It tests iscsi chap authentication troubleshooting, not iscsi svm lif target connectivity design.
B:Compare WWPNs and target sessions from both fabrics and verify host device discovery and stable multipath states. It tests fibre channel wwpn path discovery and lun visibility, not iscsi svm lif target connectivity design.
C:Test mounting and file creation from both approved and denied client addresses, checking export rule evaluation.
Question 518
An ONTAP iSCSI SVM has only one active data path even though the workload requires redundant host access. Which underlying distinction BEST explains this failure?
- Block storage connectivity needs protocol-enabled SVM services and reachable target LIFs, not just an IP address on the cluster.
- SAN availability depends jointly on storage HA and host multipathing interpretation of optimized target paths.
- NAS latency spans client, protocol, network and storage layers and often cannot be explained from disk utilization alone.
- SMB Kerberos authentication depends on directory and SPN identity integrity apart from storage volume health.
Explanation
Correct Answer
A:Block storage connectivity needs protocol-enabled SVM services and reachable target LIFs, not just an IP address on the cluster. Insufficient iSCSI paths can create host downtime during routine controller or network maintenance.
Incorrect Answers
B:SAN availability depends jointly on storage HA and host multipathing interpretation of optimized target paths. This explains host alua and multipath failover under takeover; it does not describe the limiting mechanism in iscsi svm lif target connectivity design presented by the scenario.
C:NAS latency spans client, protocol, network and storage layers and often cannot be explained from disk utilization alone. This explains nas latency and session instability diagnosis; it does not describe the limiting mechanism in iscsi svm lif target connectivity design presented by the scenario.
D:SMB Kerberos authentication depends on directory and SPN identity integrity apart from storage volume health. This explains smb domain join and kerberos name resolution failures; it does not describe the limiting mechanism in iscsi svm lif target connectivity design presented by the scenario.
Question 519
An ONTAP iSCSI SVM has only one active data path even though the workload requires redundant host access. Which ongoing practice would BEST prevent recurrence?
- Document identity mappings and security-style assumptions when new clients join the shared namespace.
- Review NQN registration and subsystem membership after host image or adapter replacement.
- Review iSCSI target and route configuration when introducing new initiator subnets.
- Review NFS export policy entries whenever application client subnets or Kerberos requirements change.
Explanation
Correct Answer
C:Review iSCSI target and route configuration when introducing new initiator subnets. Insufficient iSCSI paths can create host downtime during routine controller or network maintenance.
Incorrect Answers
A:Document identity mappings and security-style assumptions when new clients join the shared namespace.
B:Review NQN registration and subsystem membership after host image or adapter replacement. It tests nvme host connection and namespace loss analysis, not iscsi svm lif target connectivity design.
D:Review NFS export policy entries whenever application client subnets or Kerberos requirements change.
Question 520
An ONTAP iSCSI SVM has only one active data path even though the workload requires redundant host access. Choose TWO measures that together implement and verify a suitable solution for this ONTAP storage-administration situation. (Choose TWO.)
- Implement supported Fibre Channel zoning with precisely scoped initiator and target WWPN connectivity.
- Review IPspace membership and routing boundaries whenever new SVMs or tenant networks are added.
- Configure supported iSCSI target service, storage data LIFs and host initiator paths with appropriate network isolation.
- Attempt target login from both permitted and unapproved initiator identities while verifying switch network boundaries.
- Discover iSCSI targets from each approved initiator network and confirm redundant sessions and LUN visibility.
Explanation
Correct Answers
C:Configure supported iSCSI target service, storage data LIFs and host initiator paths with appropriate network isolation. Block storage connectivity needs protocol-enabled SVM services and reachable target LIFs, not just an IP address on the cluster. Insufficient iSCSI paths can create host downtime during routine controller or network maintenance.
E:Discover iSCSI targets from each approved initiator network and confirm redundant sessions and LUN visibility. Block storage connectivity needs protocol-enabled SVM services and reachable target LIFs, not just an IP address on the cluster.
Incorrect Answers
A:Implement supported Fibre Channel zoning with precisely scoped initiator and target WWPN connectivity. Block storage connectivity needs protocol-enabled SVM services and reachable target LIFs, not just an IP address on the cluster.
B:Review IPspace membership and routing boundaries whenever new SVMs or tenant networks are added. It tests ontap ipspaces and tenant routing separation, not iscsi svm lif target connectivity design.
D:Attempt target login from both permitted and unapproved initiator identities while verifying switch network boundaries.
NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests