100% Latest & Updated Palo Alto Networks NetSec-Architect Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 620
Select THREE linked elements for Regional energy provider: a supported architecture, the direct test, and the required outcome. The security architecture board of Regional energy provider is preparing a new Securing IoT Environments program. The stakeholders have given the following specific requirement: A previously trusted smart camera starts initiating DNS and outbound destinations outside its expected behavior. No existing change is being reverted; select the most directly justified architecture for this stated requirement.
- For Regional energy provider: Review Device Security behavior deviations and require approval before expanding its allowed profile.
- For Regional energy provider: Review Device Security subscription, firewall model and Device-ID feature support before designing policy enforcement.
- For Regional energy provider: Automatically expand every IoT allow rule whenever a device contacts a new internet host.
- For Regional energy provider: Unexpected device behavior triggers review rather than silently widening its security access.
- For Regional energy provider: Selected enforcement points meet the actual supported Device-ID prerequisites.
- For Regional energy provider: Replay approved camera telemetry and anomalous destinations in a safe test segment.
Explanation
Correct Answer
A:This directly addresses the recorded gap: A previously trusted smart camera starts initiating DNS and outbound destinations outside its expected behavior. The architectural control is Review Device Security behavior deviations and require approval before expanding its allowed profile. The decisive test is Replay approved camera telemetry and anomalous destinations in a safe test segment. The objective is Unexpected device behavior triggers review rather than silently widening its security access. Case R152-C155; angle 4; architecture design; option considered: Review Device Security behavior deviations and require approval before expanding its allowed profile.
D:The required end state is Unexpected device behavior triggers review rather than silently widening its security access. The architect must deploy Review Device Security behavior deviations and require approval before expanding its allowed profile. and validate using Replay approved camera telemetry and anomalous destinations in a safe test segment. Case R152-C155; angle 4; architecture design; option considered: Unexpected device behavior triggers review rather than silently widening its security access.
F:This checks the relevant device profile drift response enforcement path rather than a distant symptom. Replay approved camera telemetry and anomalous destinations in a safe test segment. The expected evidence is Unexpected device behavior triggers review rather than silently widening its security access. Case R152-C155; angle 4; architecture design; option considered: Replay approved camera telemetry and anomalous destinations in a safe test segment.
Incorrect Answers
B:This option addresses a different design objective: Device-ID license boundary, not the primary control for device profile drift response. It would be relevant where An architect assumes every firewall model can enforce device-based rules without licensing or platform assessment. Here the necessary evidence is Replay approved camera telemetry and anomalous destinations in a safe test segment. Case R152-C155; angle 4; architecture design; option considered: Review Device Security subscription, firewall model and Device-ID feature support before designing policy enforcement.
C:This is an unsafe or insufficient shortcut for device profile drift response: Automatically expand every IoT allow rule whenever a device contacts a new internet host. The scoped requirement instead calls for Review Device Security behavior deviations and require approval before expanding its allowed profile.
E:This option addresses a different design objective: Device-ID license boundary, not the primary control for device profile drift response. It would be relevant where An architect assumes every firewall model can enforce device-based rules without licensing or platform assessment. Here the necessary evidence is Replay approved camera telemetry and anomalous destinations in a safe test segment. Case R152-C155; angle 4; architecture design; option considered: Selected enforcement points meet the actual supported Device-ID prerequisites.
Question 621
For North America regional bank, which is the most directly supported architectural control for device profile drift response? After North America regional bank completed a limited security transformation pilot, reviewers observed a control gap: A previously trusted smart camera starts initiating DNS and outbound destinations outside its expected behavior. The case assumes the affected flows and dependencies have been traced and all unrelated systems are functioning; choose the narrow design repair before wider deployment.
- For North America regional bank: Correlate device discovery context with DHCP/network metadata to keep IP-to-device mappings current.
- For North America regional bank: Review Device Security behavior deviations and require approval before expanding its allowed profile.
- For North America regional bank: Plan supported virtual metadata collection or protocol telemetry integrations from distributed sites.
- For North America regional bank: Choose traffic observation points that see the relevant switch, firewall and industrial device metadata.
Explanation
Correct Answer
B:This directly addresses the recorded gap: A previously trusted smart camera starts initiating DNS and outbound destinations outside its expected behavior. The architectural control is Review Device Security behavior deviations and require approval before expanding its allowed profile. The decisive test is Replay approved camera telemetry and anomalous destinations in a safe test segment. The objective is Unexpected device behavior triggers review rather than silently widening its security access. Case R152-C156; angle 1; post-pilot control gap; option considered: Review Device Security behavior deviations and require approval before expanding its allowed profile.
Incorrect Answers
A:This option addresses a different design objective: DHCP and identity correlation, not the primary control for device profile drift response. It would be relevant where A security team misattributes events after DHCP leases change for medical and guest devices. Here the necessary evidence is Replay approved camera telemetry and anomalous destinations in a safe test segment. Case R152-C156; angle 1; post-pilot control gap; option considered: Correlate device discovery context with DHCP/network metadata to keep IP-to-device mappings current.
C:Device metadata collector coverage addresses a different architectural concern, such as when remote switches and wireless segments are invisible to the central Device Security asset model. It does not establish device profile drift response here. The decisive test is to replay approved camera telemetry and anomalous destinations in a safe test segment.
D:Network sensor placement addresses a different architectural concern, such as when IoT discovery sensors placed on an internet edge miss east-west exchanges between campus operational VLANs. It does not establish device profile drift response here. The decisive test is to replay approved camera telemetry and anomalous destinations in a safe test segment.
Question 622
Which validation most directly demonstrates device profile drift response is correctly designed for North America regional bank? After North America regional bank completed a limited security transformation pilot, reviewers observed a control gap: A previously trusted smart camera starts initiating DNS and outbound destinations outside its expected behavior. The case assumes the affected flows and dependencies have been traced and all unrelated systems are functioning; choose the narrow design repair before wider deployment.
- For North America regional bank: Fail the panel over to a different site subnet and validate permitted control traffic and device mapping.
- For North America regional bank: Replay approved camera telemetry and anomalous destinations in a safe test segment.
- For North America regional bank: Evaluate an approved camera flow and a medical control flow against reviewed risk-based rules.
- For North America regional bank: Check supported models and licenses in the proposed deployment and validate a test device-based rule.
Explanation
Correct Answer
B:This checks the relevant device profile drift response enforcement path rather than a distant symptom. Replay approved camera telemetry and anomalous destinations in a safe test segment. The expected evidence is Unexpected device behavior triggers review rather than silently widening its security access. Case R152-C156; angle 2; post-pilot control gap; option considered: Replay approved camera telemetry and anomalous destinations in a safe test segment.
Incorrect Answers
A:This option addresses a different design objective: Device-ID after address change, not the primary control for device profile drift response. It would be relevant where A building access panel loses its IP address while moving to a backup network and is wrongly denied. Here the necessary evidence is Replay approved camera telemetry and anomalous destinations in a safe test segment. Case R152-C156; angle 2; post-pilot control gap; option considered: Fail the panel over to a different site subnet and validate permitted control traffic and device mapping.
C:IoT risk-based policy sequencing addresses a different architectural concern, such as when a site imported all IoT policy recommendations without evaluating life-safety or business criticality. It does not establish device profile drift response here. The decisive test is to replay approved camera telemetry and anomalous destinations in a safe test segment.
D:This option addresses a different design objective: Device-ID license boundary, not the primary control for device profile drift response. It would be relevant where An architect assumes every firewall model can enforce device-based rules without licensing or platform assessment. Here the necessary evidence is Replay approved camera telemetry and anomalous destinations in a safe test segment. Case R152-C156; angle 2; post-pilot control gap; option considered: Check supported models and licenses in the proposed deployment and validate a test device-based rule.
Question 623
Which design assumption should the architect REJECT when evaluating device profile drift response for North America regional bank? After North America regional bank completed a limited security transformation pilot, reviewers observed a control gap: A previously trusted smart camera starts initiating DNS and outbound destinations outside its expected behavior. The case assumes the affected flows and dependencies have been traced and all unrelated systems are functioning; choose the narrow design repair before wider deployment.
- For North America regional bank: Replay approved camera telemetry and anomalous destinations in a safe test segment.
- For North America regional bank: Unexpected device behavior triggers review rather than silently widening its security access.
- For North America regional bank: Automatically expand every IoT allow rule whenever a device contacts a new internet host.
- For North America regional bank: Review Device Security behavior deviations and require approval before expanding its allowed profile.
Explanation
Correct Answer
C:Reject this assumption: Automatically expand every IoT allow rule whenever a device contacts a new internet host. It does not establish device profile drift response; the supported architecture is Review Device Security behavior deviations and require approval before expanding its allowed profile. Verify it by: Replay approved camera telemetry and anomalous destinations in a safe test segment. Case R152-C156; angle 3; post-pilot control gap; option considered: Automatically expand every IoT allow rule whenever a device contacts a new internet host.
Incorrect Answers
A:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Replay approved camera telemetry and anomalous destinations in a safe test segment. It is consistent with the required outcome: Unexpected device behavior triggers review rather than silently widening its security access. Case R152-C156; angle 3; post-pilot control gap; option considered: Replay approved camera telemetry and anomalous destinations in a safe test segment.
B:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Unexpected device behavior triggers review rather than silently widening its security access. It is consistent with the required outcome: Unexpected device behavior triggers review rather than silently widening its security access. Case R152-C156; angle 3; post-pilot control gap; option considered: Unexpected device behavior triggers review rather than silently widening its security access.
D:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Review Device Security behavior deviations and require approval before expanding its allowed profile. It is consistent with the required outcome: Unexpected device behavior triggers review rather than silently widening its security access. Case R152-C156; angle 3; post-pilot control gap; option considered: Review Device Security behavior deviations and require approval before expanding its allowed profile.
Question 624
Which measurable end state best satisfies the stated device profile drift response requirement for North America regional bank? After North America regional bank completed a limited security transformation pilot, reviewers observed a control gap: A previously trusted smart camera starts initiating DNS and outbound destinations outside its expected behavior. The case assumes the affected flows and dependencies have been traced and all unrelated systems are functioning; choose the narrow design repair before wider deployment.
- For North America regional bank: Selected enforcement points meet the actual supported Device-ID prerequisites.
- For North America regional bank: Security events track device context across the lease update instead of treating IP as permanent identity.
- For North America regional bank: Unexpected device behavior triggers review rather than silently widening its security access.
- For North America regional bank: Necessary patient-care telemetry operates while unauthorized device communications are constrained.
Explanation
Correct Answer
C:The required end state is Unexpected device behavior triggers review rather than silently widening its security access. The architect must deploy Review Device Security behavior deviations and require approval before expanding its allowed profile. and validate using Replay approved camera telemetry and anomalous destinations in a safe test segment. Case R152-C156; angle 4; post-pilot control gap; option considered: Unexpected device behavior triggers review rather than silently widening its security access.
Incorrect Answers
A:This option addresses a different design objective: Device-ID license boundary, not the primary control for device profile drift response. It would be relevant where An architect assumes every firewall model can enforce device-based rules without licensing or platform assessment. Here the necessary evidence is Replay approved camera telemetry and anomalous destinations in a safe test segment. Case R152-C156; angle 4; post-pilot control gap; option considered: Selected enforcement points meet the actual supported Device-ID prerequisites.
B:This option addresses a different design objective: DHCP and identity correlation, not the primary control for device profile drift response. It would be relevant where A security team misattributes events after DHCP leases change for medical and guest devices. Here the necessary evidence is Replay approved camera telemetry and anomalous destinations in a safe test segment. Case R152-C156; angle 4; post-pilot control gap; option considered: Security events track device context across the lease update instead of treating IP as permanent identity.
D:Medical IoT least privilege addresses a different architectural concern, such as when an infusion pump needs vendor cloud telemetry but should never initiate unrestricted RDP to corporate servers. It does not establish device profile drift response here. The decisive test is to replay approved camera telemetry and anomalous destinations in a safe test segment.
Question 625
For Asia-Pacific SaaS provider, which is the most directly supported architectural control for shared subnet site identity ambiguity? The security architecture board of Asia-Pacific SaaS provider is preparing a new Securing IoT Environments program. The stakeholders have given the following specific requirement: Two plants reuse the same private IP range, causing aggregated Device-ID events to be assigned to the wrong equipment. No existing change is being reverted; select the most directly justified architecture for this stated requirement.
- For Asia-Pacific SaaS provider: Review Device Security behavior deviations and require approval before expanding its allowed profile.
- For Asia-Pacific SaaS provider: Correlate device discovery context with DHCP/network metadata to keep IP-to-device mappings current.
- For Asia-Pacific SaaS provider: Deploy supported Device Security passive discovery using existing network telemetry and nonintrusive collection sources.
- For Asia-Pacific SaaS provider: Use supported Device Security network segment context to distinguish overlapping-address asset populations.
Explanation
Correct Answer
D:This directly addresses the recorded gap: Two plants reuse the same private IP range, causing aggregated Device-ID events to be assigned to the wrong equipment. The architectural control is Use supported Device Security network segment context to distinguish overlapping-address asset populations. The decisive test is Observe the same RFC1918 address in each plant and verify the separate device contexts and enforcement. The objective is Identical IP values map to the correct physical site and device without cross-plant confusion. Case R152-C157; angle 1; architecture design; option considered: Use supported Device Security network segment context to distinguish overlapping-address asset populations.
Incorrect Answers
A:This option addresses a different design objective: Device profile drift response, not the primary control for shared subnet site identity ambiguity. It would be relevant where A previously trusted smart camera starts initiating DNS and outbound destinations outside its expected behavior. Here the necessary evidence is Observe the same RFC1918 address in each plant and verify the separate device contexts and enforcement. Case R152-C157; angle 1; architecture design; option considered: Review Device Security behavior deviations and require approval before expanding its allowed profile.
B:DHCP and identity correlation addresses a different architectural concern, such as when a security team misattributes events after DHCP leases change for medical and guest devices. It does not establish shared subnet site identity ambiguity here. The decisive test is to observe the same RFC1918 address in each plant and verify the separate device contexts and enforcement.
C:This option addresses a different design objective: Passive asset inventory, not the primary control for shared subnet site identity ambiguity. It would be relevant where Hospitals have unmanaged pumps that cannot accept scanning agents, and asset inventory is incomplete. Here the necessary evidence is Observe the same RFC1918 address in each plant and verify the separate device contexts and enforcement. Case R152-C157; angle 1; architecture design; option considered: Deploy supported Device Security passive discovery using existing network telemetry and nonintrusive collection sources.
Question 626
Which validation most directly demonstrates shared subnet site identity ambiguity is correctly designed for Asia-Pacific SaaS provider? The security architecture board of Asia-Pacific SaaS provider is preparing a new Securing IoT Environments program. The stakeholders have given the following specific requirement: Two plants reuse the same private IP range, causing aggregated Device-ID events to be assigned to the wrong equipment. No existing change is being reverted; select the most directly justified architecture for this stated requirement.
- For Asia-Pacific SaaS provider: Allow the documented telemetry endpoint and deny an unauthorized administrative connection.
- For Asia-Pacific SaaS provider: Observe a representative pump session and check device class, vendor, model and evidence confidence.
- For Asia-Pacific SaaS provider: Replay approved camera telemetry and anomalous destinations in a safe test segment.
- For Asia-Pacific SaaS provider: Observe the same RFC1918 address in each plant and verify the separate device contexts and enforcement.
Explanation
Correct Answer
D:This checks the relevant shared subnet site identity ambiguity enforcement path rather than a distant symptom. Observe the same RFC1918 address in each plant and verify the separate device contexts and enforcement. The expected evidence is Identical IP values map to the correct physical site and device without cross-plant confusion. Case R152-C157; angle 2; architecture design; option considered: Observe the same RFC1918 address in each plant and verify the separate device contexts and enforcement.
Incorrect Answers
A:This option addresses a different design objective: Medical IoT least privilege, not the primary control for shared subnet site identity ambiguity. It would be relevant where An infusion pump needs vendor cloud telemetry but should never initiate unrestricted RDP to corporate servers. Here the necessary evidence is Observe the same RFC1918 address in each plant and verify the separate device contexts and enforcement. Case R152-C157; angle 2; architecture design; option considered: Allow the documented telemetry endpoint and deny an unauthorized administrative connection.
B:This option addresses a different design objective: Passive asset inventory, not the primary control for shared subnet site identity ambiguity. It would be relevant where Hospitals have unmanaged pumps that cannot accept scanning agents, and asset inventory is incomplete. Here the necessary evidence is Observe the same RFC1918 address in each plant and verify the separate device contexts and enforcement. Case R152-C157; angle 2; architecture design; option considered: Observe a representative pump session and check device class, vendor, model and evidence confidence.
C:This option addresses a different design objective: Device profile drift response, not the primary control for shared subnet site identity ambiguity. It would be relevant where A previously trusted smart camera starts initiating DNS and outbound destinations outside its expected behavior. Here the necessary evidence is Observe the same RFC1918 address in each plant and verify the separate device contexts and enforcement. Case R152-C157; angle 2; architecture design; option considered: Replay approved camera telemetry and anomalous destinations in a safe test segment.
Question 627
Which design assumption should the architect REJECT when evaluating shared subnet site identity ambiguity for Asia-Pacific SaaS provider? The security architecture board of Asia-Pacific SaaS provider is preparing a new Securing IoT Environments program. The stakeholders have given the following specific requirement: Two plants reuse the same private IP range, causing aggregated Device-ID events to be assigned to the wrong equipment. No existing change is being reverted; select the most directly justified architecture for this stated requirement.
- For Asia-Pacific SaaS provider: Identical IP values map to the correct physical site and device without cross-plant confusion.
- For Asia-Pacific SaaS provider: Treat one shared IP-to-device record as globally unique across overlapping industrial networks.
- For Asia-Pacific SaaS provider: Observe the same RFC1918 address in each plant and verify the separate device contexts and enforcement.
- For Asia-Pacific SaaS provider: Use supported Device Security network segment context to distinguish overlapping-address asset populations.
Explanation
Correct Answer
B:Reject this assumption: Treat one shared IP-to-device record as globally unique across overlapping industrial networks. It does not establish shared subnet site identity ambiguity; the supported architecture is Use supported Device Security network segment context to distinguish overlapping-address asset populations. Verify it by: Observe the same RFC1918 address in each plant and verify the separate device contexts and enforcement. Case R152-C157; angle 3; architecture design; option considered: Treat one shared IP-to-device record as globally unique across overlapping industrial networks.
Incorrect Answers
A:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Identical IP values map to the correct physical site and device without cross-plant confusion. It is consistent with the required outcome: Identical IP values map to the correct physical site and device without cross-plant confusion. Case R152-C157; angle 3; architecture design; option considered: Identical IP values map to the correct physical site and device without cross-plant confusion.
C:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Observe the same RFC1918 address in each plant and verify the separate device contexts and enforcement. It is consistent with the required outcome: Identical IP values map to the correct physical site and device without cross-plant confusion. Case R152-C157; angle 3; architecture design; option considered: Observe the same RFC1918 address in each plant and verify the separate device contexts and enforcement.
D:This is a valid design/control/evidence statement in the specified case, not the assumption to reject. Use supported Device Security network segment context to distinguish overlapping-address asset populations. It is consistent with the required outcome: Identical IP values map to the correct physical site and device without cross-plant confusion. Case R152-C157; angle 3; architecture design; option considered: Use supported Device Security network segment context to distinguish overlapping-address asset populations.
Question 628
Select TWO directly linked controls for Asia-Pacific SaaS provider: the architectural remedy and its decisive validation. The security architecture board of Asia-Pacific SaaS provider is preparing a new Securing IoT Environments program. The stakeholders have given the following specific requirement: Two plants reuse the same private IP range, causing aggregated Device-ID events to be assigned to the wrong equipment. No existing change is being reverted; select the most directly justified architecture for this stated requirement.
- For Asia-Pacific SaaS provider: Observe the same RFC1918 address in each plant and verify the separate device contexts and enforcement.
- For Asia-Pacific SaaS provider: Treat one shared IP-to-device record as globally unique across overlapping industrial networks.
- For Asia-Pacific SaaS provider: Use supported Device Security network segment context to distinguish overlapping-address asset populations.
- For Asia-Pacific SaaS provider: Deploy supported Device Security passive discovery using existing network telemetry and nonintrusive collection sources.
- For Asia-Pacific SaaS provider: Evaluate an approved camera flow and a medical control flow against reviewed risk-based rules.
Explanation
Correct Answer
A:This checks the relevant shared subnet site identity ambiguity enforcement path rather than a distant symptom. Observe the same RFC1918 address in each plant and verify the separate device contexts and enforcement. The expected evidence is Identical IP values map to the correct physical site and device without cross-plant confusion. Case R152-C157; angle 4; architecture design; option considered: Observe the same RFC1918 address in each plant and verify the separate device contexts and enforcement.
C:This directly addresses the recorded gap: Two plants reuse the same private IP range, causing aggregated Device-ID events to be assigned to the wrong equipment. The architectural control is Use supported Device Security network segment context to distinguish overlapping-address asset populations. The decisive test is Observe the same RFC1918 address in each plant and verify the separate device contexts and enforcement. The objective is Identical IP values map to the correct physical site and device without cross-plant confusion. Case R152-C157; angle 4; architecture design; option considered: Use supported Device Security network segment context to distinguish overlapping-address asset populations.
Incorrect Answers
B:This is an unsafe or insufficient shortcut for shared subnet site identity ambiguity: Treat one shared IP-to-device record as globally unique across overlapping industrial networks. The scoped requirement instead calls for Use supported Device Security network segment context to distinguish overlapping-address asset populations. Case R152-C157; angle 4; architecture design; option considered: Treat one shared IP-to-device record as globally unique across overlapping industrial networks.
D:This option addresses a different design objective: Passive asset inventory, not the primary control for shared subnet site identity ambiguity. It would be relevant where Hospitals have unmanaged pumps that cannot accept scanning agents, and asset inventory is incomplete. Here the necessary evidence is Observe the same RFC1918 address in each plant and verify the separate device contexts and enforcement. Case R152-C157; angle 4; architecture design; option considered: Deploy supported Device Security passive discovery using existing network telemetry and nonintrusive collection sources.
E:This option addresses a different design objective: IoT risk-based policy sequencing, not the primary control for shared subnet site identity ambiguity. It would be relevant where A site imported all IoT policy recommendations without evaluating life-safety or business criticality. Here the necessary evidence is Observe the same RFC1918 address in each plant and verify the separate device contexts and enforcement. Case R152-C157; angle 4; architecture design; option considered: Evaluate an approved camera flow and a medical control flow against reviewed risk-based rules.
Question 629
For U.S. regional insurer, which is the most directly supported architectural control for shared subnet site identity ambiguity? After U.S. regional insurer completed a limited security transformation pilot, reviewers observed a control gap: Two plants reuse the same private IP range, causing aggregated Device-ID events to be assigned to the wrong equipment. The case assumes the affected flows and dependencies have been traced and all unrelated systems are functioning; choose the narrow design repair before wider deployment.
- For U.S. regional insurer: Use supported Device Security network segment context to distinguish overlapping-address asset populations.
- For U.S. regional insurer: Design Device-ID policy that references approved device attributes with site scope and mapping freshness checks.
- For U.S. regional insurer: Design risk-based OT zone boundaries with permitted protocol paths and change-control windows.
- For U.S. regional insurer: Review Device Security behavior deviations and require approval before expanding its allowed profile.
Explanation
Correct Answer
A:This directly addresses the recorded gap: Two plants reuse the same private IP range, causing aggregated Device-ID events to be assigned to the wrong equipment. The architectural control is Use supported Device Security network segment context to distinguish overlapping-address asset populations. The decisive test is Observe the same RFC1918 address in each plant and verify the separate device contexts and enforcement. The objective is Identical IP values map to the correct physical site and device without cross-plant confusion. Case R152-C158; angle 1; post-pilot control gap; option considered: Use supported Device Security network segment context to distinguish overlapping-address asset populations.
Incorrect Answers
B:Device-ID after address change addresses a different architectural concern, such as when a building access panel loses its IP address while moving to a backup network and is wrongly denied. It does not establish shared subnet site identity ambiguity here. The decisive test is to observe the same RFC1918 address in each plant and verify the separate device contexts and enforcement.
C:This option addresses a different design objective: Industrial OT segmentation boundaries, not the primary control for shared subnet site identity ambiguity. It would be relevant where Programmable controllers and engineering workstations share unrestricted policy although they have different roles. Here the necessary evidence is Observe the same RFC1918 address in each plant and verify the separate device contexts and enforcement. Case R152-C158; angle 1; post-pilot control gap; option considered: Design risk-based OT zone boundaries with permitted protocol paths and change-control windows.
D:This option addresses a different design objective: Device profile drift response, not the primary control for shared subnet site identity ambiguity. It would be relevant where A previously trusted smart camera starts initiating DNS and outbound destinations outside its expected behavior. Here the necessary evidence is Observe the same RFC1918 address in each plant and verify the separate device contexts and enforcement. Case R152-C158; angle 1; post-pilot control gap; option considered: Review Device Security behavior deviations and require approval before expanding its allowed profile.
Question 630
Which validation most directly demonstrates shared subnet site identity ambiguity is correctly designed for U.S. regional insurer? After U.S. regional insurer completed a limited security transformation pilot, reviewers observed a control gap: Two plants reuse the same private IP range, causing aggregated Device-ID events to be assigned to the wrong equipment. The case assumes the affected flows and dependencies have been traced and all unrelated systems are functioning; choose the narrow design repair before wider deployment.
- For U.S. regional insurer: Evaluate an approved camera flow and a medical control flow against reviewed risk-based rules.
- For U.S. regional insurer: Check supported models and licenses in the proposed deployment and validate a test device-based rule.
- For U.S. regional insurer: Observe the same RFC1918 address in each plant and verify the separate device contexts and enforcement.
- For U.S. regional insurer: Replay approved camera telemetry and anomalous destinations in a safe test segment.
Explanation
Correct Answer
C:This checks the relevant shared subnet site identity ambiguity enforcement path rather than a distant symptom. Observe the same RFC1918 address in each plant and verify the separate device contexts and enforcement. The expected evidence is Identical IP values map to the correct physical site and device without cross-plant confusion. Case R152-C158; angle 2; post-pilot control gap; option considered: Observe the same RFC1918 address in each plant and verify the separate device contexts and enforcement.
Incorrect Answers
A:This option addresses a different design objective: IoT risk-based policy sequencing, not the primary control for shared subnet site identity ambiguity. It would be relevant where A site imported all IoT policy recommendations without evaluating life-safety or business criticality. Here the necessary evidence is Observe the same RFC1918 address in each plant and verify the separate device contexts and enforcement. Case R152-C158; angle 2; post-pilot control gap; option considered: Evaluate an approved camera flow and a medical control flow against reviewed risk-based rules.
B:Device-ID license boundary addresses a different architectural concern, such as when an architect assumes every firewall model can enforce device-based rules without licensing or platform assessment. It does not establish shared subnet site identity ambiguity here. The decisive test is to observe the same RFC1918 address in each plant and verify the separate device contexts and enforcement.
D:This option addresses a different design objective: Device profile drift response, not the primary control for shared subnet site identity ambiguity. It would be relevant where A previously trusted smart camera starts initiating DNS and outbound destinations outside its expected behavior. Here the necessary evidence is Observe the same RFC1918 address in each plant and verify the separate device contexts and enforcement. Case R152-C158; angle 2; post-pilot control gap; option considered: Replay approved camera telemetry and anomalous destinations in a safe test segment.
Palo Alto Networks Network Security Architect (NetSec-Architect) Practice Tests