100% Latest & Updated Juniper JN0-364 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 210
The intended new prefix is locally active, but regional IS-IS neighbors never install it after a routing-policy edit. Independently, the review flags the potentially unsafe practice “Declare success based only on a policy syntax commit”. Which validation addresses the risk without assuming a particular cause?
- Check neighbor LSDB and active route for the destination
- Inspect source route and protocol eligibility
- Inspect per-level LSP content for the exported destination
- Replace import and export policy with unconditional accept all
Explanation
Correct Answer
A:Syntax validation cannot confirm remote installation. A configured policy is not proof that remote routers received and selected it.
Incorrect Answers
B:Export policy cannot advertise a route that is absent or unusable.
C:Correct policy and level both affect regional visibility.
D:Broad export can leak unrelated customer prefixes.
Question 211
A newly rebooted core router advertises IS-IS reachability before its routing tables have converged and operators want to avoid transiting traffic prematurely. The objective is to interpret overload indication. Which Junos configuration or design action best satisfies the objective?
- Inspect whether the router advertises IS-IS overload while not ready for transit
- Assume Up neighbors mean all critical forwarding entries are installed
- Clear overload immediately when power is restored without checking services
- Assume overload should delete all local service prefix reachability unconditionally
Explanation
Correct Answer
A:The overload bit can discourage transit use during incomplete convergence.
Incorrect Answers
B:Adjacency health alone is insufficient for transit readiness.
C:Boot completion is not complete forwarding readiness.
D:Overload behavior has nuanced reachability and transit effects.
Question 212
A newly rebooted core router advertises IS-IS reachability before its routing tables have converged and operators want to avoid transiting traffic prematurely. The objective is to separate adjacency from transit readiness. Which operational choice should be prioritized in this design?
- Force an unstable router into transit before verifying its control plane
- Assume overload should delete all local service prefix reachability unconditionally
- Clear overload immediately when power is restored without checking services
- Validate routing and forwarding readiness before allowing ordinary transit
Explanation
Correct Answer
D:Neighbor establishment can precede complete route programming.
Incorrect Answers
A:Premature transit can drop unrelated traffic.
B:Overload behavior has nuanced reachability and transit effects.
C:Boot completion is not complete forwarding readiness.
Question 213
A newly rebooted core router advertises IS-IS reachability before its routing tables have converged and operators want to avoid transiting traffic prematurely. The objective is to check remote SPF reaction. Which routing or switching control best fits the requirement?
- Assume Up neighbors mean all critical forwarding entries are installed
- Clear overload immediately when power is restored without checking services
- Confirm other routers avoid the overloaded node for transit where appropriate
- Force an unstable router into transit before verifying its control plane
Explanation
Correct Answer
C:Correct overload handling alters remote SPF transit decisions.
Incorrect Answers
A:Adjacency health alone is insufficient for transit readiness.
B:Boot completion is not complete forwarding readiness.
D:Premature transit can drop unrelated traffic.
Question 214
A newly rebooted core router advertises IS-IS reachability before its routing tables have converged and operators want to avoid transiting traffic prematurely. The objective is to clear overload safely. Which verification should be performed before approving the change?
- Force an unstable router into transit before verifying its control plane
- Assume Up neighbors mean all critical forwarding entries are installed
- Assume overload should delete all local service prefix reachability unconditionally
- Remove temporary overload after stable route and forwarding checks
Explanation
Correct Answer
D:Recovery should be evidence-based rather than timer-only guesswork.
Incorrect Answers
A:Premature transit can drop unrelated traffic.
B:Adjacency health alone is insufficient for transit readiness.
C:Overload behavior has nuanced reachability and transit effects.
Question 215
A newly rebooted core router advertises IS-IS reachability before its routing tables have converged and operators want to avoid transiting traffic prematurely. Two objectives apply: (1) separate adjacency from transit readiness; and (2) clear overload safely. Which TWO controls together satisfy the requirements? Choose TWO.
- Validate routing and forwarding readiness before allowing ordinary transit
- Remove temporary overload after stable route and forwarding checks
- Force an unstable router into transit before verifying its control plane
- Assume Up neighbors mean all critical forwarding entries are installed
- Assume overload should delete all local service prefix reachability unconditionally
Explanation
Correct Answers
A:Neighbor establishment can precede complete route programming.
B:Recovery should be evidence-based rather than timer-only guesswork.
Incorrect Answers
C:Premature transit can drop unrelated traffic.
D:Adjacency health alone is insufficient for transit readiness.
E:Overload behavior has nuanced reachability and transit effects.
Question 216
A newly rebooted core router advertises IS-IS reachability before its routing tables have converged and operators want to avoid transiting traffic prematurely. Three objectives apply: (1) interpret overload indication; (2) check remote SPF reaction; and (3) clear overload safely. Which THREE controls together satisfy the requirements? Choose THREE.
- Assume Up neighbors mean all critical forwarding entries are installed
- Remove temporary overload after stable route and forwarding checks
- Force an unstable router into transit before verifying its control plane
- Inspect whether the router advertises IS-IS overload while not ready for transit
- Assume overload should delete all local service prefix reachability unconditionally
- Confirm other routers avoid the overloaded node for transit where appropriate
Explanation
Correct Answers
B:Recovery should be evidence-based rather than timer-only guesswork.
D:The overload bit can discourage transit use during incomplete convergence.
F:Correct overload handling alters remote SPF transit decisions.
Incorrect Answers
A:Adjacency health alone is insufficient for transit readiness.
C:Premature transit can drop unrelated traffic.
E:Overload behavior has nuanced reachability and transit effects.
Question 217
After maintenance, traffic briefly blackholes through a router that has adjacencies but incomplete services on its forwarding plane. Independently, the review flags the potentially unsafe practice “Force an unstable router into transit before verifying its control plane”. Which inspection best evaluates that practice?
- Inspect overload-bit state in the originated LSP
- Clear overload immediately when power is restored without checking services
- Compare neighbor state with forwarding-table completeness
- Inspect remote SPF next hops while overload is set
Explanation
Correct Answer
A:Premature transit can drop unrelated traffic. The overload bit can discourage transit use during incomplete convergence.
Incorrect Answers
B:Boot completion is not complete forwarding readiness.
C:Neighbor establishment can precede complete route programming.
D:Correct overload handling alters remote SPF transit decisions.
Question 218
After maintenance, traffic briefly blackholes through a router that has adjacencies but incomplete services on its forwarding plane. Independently, the review flags the potentially unsafe practice “Assume Up neighbors mean all critical forwarding entries are installed”. Which evidence most directly tests the flagged assumption?
- Compare neighbor state with forwarding-table completeness
- Inspect overload-bit state in the originated LSP
- Inspect convergence evidence and resulting transit paths after clearing
- Assume overload should delete all local service prefix reachability unconditionally
Explanation
Correct Answer
A:Adjacency health alone is insufficient for transit readiness. Neighbor establishment can precede complete route programming.
Incorrect Answers
B:The overload bit can discourage transit use during incomplete convergence.
C:Recovery should be evidence-based rather than timer-only guesswork.
D:Overload behavior has nuanced reachability and transit effects.
Question 219
After maintenance, traffic briefly blackholes through a router that has adjacencies but incomplete services on its forwarding plane. Independently, the review flags the potentially unsafe practice “Assume overload should delete all local service prefix reachability unconditionally”. Which diagnostic check tests this potentially unsafe choice?
- Inspect convergence evidence and resulting transit paths after clearing
- Compare neighbor state with forwarding-table completeness
- Force an unstable router into transit before verifying its control plane
- Inspect remote SPF next hops while overload is set
Explanation
Correct Answer
D:Overload behavior has nuanced reachability and transit effects. Correct overload handling alters remote SPF transit decisions.
Incorrect Answers
A:Recovery should be evidence-based rather than timer-only guesswork.
B:Neighbor establishment can precede complete route programming.
C:Premature transit can drop unrelated traffic.
Question 220
After maintenance, traffic briefly blackholes through a router that has adjacencies but incomplete services on its forwarding plane. Independently, the review flags the potentially unsafe practice “Clear overload immediately when power is restored without checking services”. Which validation addresses the risk without assuming a particular cause?
- Inspect convergence evidence and resulting transit paths after clearing
- Compare neighbor state with forwarding-table completeness
- Assume overload should delete all local service prefix reachability unconditionally
- Inspect overload-bit state in the originated LSP
Explanation
Correct Answer
A:Boot completion is not complete forwarding readiness. Recovery should be evidence-based rather than timer-only guesswork.
Incorrect Answers
B:Neighbor establishment can precede complete route programming.
C:Overload behavior has nuanced reachability and transit effects.
D:The overload bit can discourage transit use during incomplete convergence.
Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests