100% Latest & Updated Juniper JN0-364 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 200
The link is healthy and adjacency is Up, yet selected paths do not match the engineered design after metric migration. Independently, the review flags the potentially unsafe practice “Mark tuning complete merely because adjacency stays Up”. Which validation addresses the risk without assuming a particular cause?
- Select an exit solely because its last-hop metric is smallest
- Check active route next hop and egress flow after tuning
- Inspect per-level selected routes and topology identifiers
- Compare interface metrics in the LSDB
Explanation
Correct Answer
B:A healthy neighbor does not prove the desired path selection. Effective engineering requires both RIB and forwarding validation.
Incorrect Answers
A:Total cost includes all relevant links.
C:Level-specific routes can differ across regional boundaries.
D:SPF uses advertised link costs to select paths.
Question 201
A customer edge route must be exported into provider IS-IS under restrictive policy without advertising other customer routes. The objective is to identify export candidate. Which Junos configuration or design action best satisfies the objective?
- Advertise a regional prefix in a level no target neighbor participates in
- Verify the candidate prefix exists and is eligible in the source routing table
- Replace import and export policy with unconditional accept all
- Declare success based only on a policy syntax commit
Explanation
Correct Answer
B:Export policy cannot advertise a route that is absent or unusable.
Incorrect Answers
A:A mismatched level cannot reach the intended neighbors.
C:Broad export can leak unrelated customer prefixes.
D:Syntax validation cannot confirm remote installation.
Question 202
A customer edge route must be exported into provider IS-IS under restrictive policy without advertising other customer routes. The objective is to apply precise export policy. Which operational choice should be prioritized in this design?
- Advertise a regional prefix in a level no target neighbor participates in
- Configure a policy match for only approved reachability and appropriate action
- Assume an uncommitted static route will be exported automatically
- Declare success based only on a policy syntax commit
Explanation
Correct Answer
B:Narrow policy constrains redistributed prefixes.
Incorrect Answers
A:A mismatched level cannot reach the intended neighbors.
C:Uncommitted routes are not candidates for the active RIB.
D:Syntax validation cannot confirm remote installation.
Question 203
A customer edge route must be exported into provider IS-IS under restrictive policy without advertising other customer routes. The objective is to check level advertisement. Which routing or switching control best fits the requirement?
- Declare success based only on a policy syntax commit
- Confirm the export is placed into the appropriate IS-IS level and reachability TLV
- Replace import and export policy with unconditional accept all
- Assume an uncommitted static route will be exported automatically
Explanation
Correct Answer
B:Correct policy and level both affect regional visibility.
Incorrect Answers
A:Syntax validation cannot confirm remote installation.
C:Broad export can leak unrelated customer prefixes.
D:Uncommitted routes are not candidates for the active RIB.
Question 204
A customer edge route must be exported into provider IS-IS under restrictive policy without advertising other customer routes. The objective is to verify receiving route. Which verification should be performed before approving the change?
- Assume an uncommitted static route will be exported automatically
- Inspect neighbor database and route table for the redistributed prefix
- Advertise a regional prefix in a level no target neighbor participates in
- Replace import and export policy with unconditional accept all
Explanation
Correct Answer
B:A configured policy is not proof that remote routers received and selected it.
Incorrect Answers
A:Uncommitted routes are not candidates for the active RIB.
C:A mismatched level cannot reach the intended neighbors.
D:Broad export can leak unrelated customer prefixes.
Question 205
A customer edge route must be exported into provider IS-IS under restrictive policy without advertising other customer routes. Two objectives apply: (1) identify export candidate; and (2) check level advertisement. Which TWO controls together satisfy the requirements? Choose TWO.
- Confirm the export is placed into the appropriate IS-IS level and reachability TLV
- Assume an uncommitted static route will be exported automatically
- Verify the candidate prefix exists and is eligible in the source routing table
- Declare success based only on a policy syntax commit
- Replace import and export policy with unconditional accept all
Explanation
Correct Answers
A:Correct policy and level both affect regional visibility.
C:Export policy cannot advertise a route that is absent or unusable.
Incorrect Answers
B:Uncommitted routes are not candidates for the active RIB.
D:Syntax validation cannot confirm remote installation.
E:Broad export can leak unrelated customer prefixes.
Question 206
A customer edge route must be exported into provider IS-IS under restrictive policy without advertising other customer routes. Three objectives apply: (1) identify export candidate; (2) apply precise export policy; and (3) verify receiving route. Which THREE controls together satisfy the requirements? Choose THREE.
- Assume an uncommitted static route will be exported automatically
- Replace import and export policy with unconditional accept all
- Verify the candidate prefix exists and is eligible in the source routing table
- Configure a policy match for only approved reachability and appropriate action
- Advertise a regional prefix in a level no target neighbor participates in
- Inspect neighbor database and route table for the redistributed prefix
Explanation
Correct Answers
C:Export policy cannot advertise a route that is absent or unusable.
D:Narrow policy constrains redistributed prefixes.
F:A configured policy is not proof that remote routers received and selected it.
Incorrect Answers
A:Uncommitted routes are not candidates for the active RIB.
B:Broad export can leak unrelated customer prefixes.
E:A mismatched level cannot reach the intended neighbors.
Question 207
The intended new prefix is locally active, but regional IS-IS neighbors never install it after a routing-policy edit. Independently, the review flags the potentially unsafe practice “Assume an uncommitted static route will be exported automatically”. Which inspection best evaluates that practice?
- Check neighbor LSDB and active route for the destination
- Inspect source route and protocol eligibility
- Replace import and export policy with unconditional accept all
- Inspect per-level LSP content for the exported destination
Explanation
Correct Answer
B:Uncommitted routes are not candidates for the active RIB. Export policy cannot advertise a route that is absent or unusable.
Incorrect Answers
A:A configured policy is not proof that remote routers received and selected it.
C:Broad export can leak unrelated customer prefixes.
D:Correct policy and level both affect regional visibility.
Question 208
The intended new prefix is locally active, but regional IS-IS neighbors never install it after a routing-policy edit. Independently, the review flags the potentially unsafe practice “Replace import and export policy with unconditional accept all”. Which evidence most directly tests the flagged assumption?
- Inspect per-level LSP content for the exported destination
- Review policy term conditions and actions
- Assume an uncommitted static route will be exported automatically
- Check neighbor LSDB and active route for the destination
Explanation
Correct Answer
B:Broad export can leak unrelated customer prefixes. Narrow policy constrains redistributed prefixes.
Incorrect Answers
A:Correct policy and level both affect regional visibility.
C:Uncommitted routes are not candidates for the active RIB.
D:A configured policy is not proof that remote routers received and selected it.
Question 209
The intended new prefix is locally active, but regional IS-IS neighbors never install it after a routing-policy edit. Independently, the review flags the potentially unsafe practice “Advertise a regional prefix in a level no target neighbor participates in”. Which diagnostic check tests this potentially unsafe choice?
- Review policy term conditions and actions
- Assume an uncommitted static route will be exported automatically
- Check neighbor LSDB and active route for the destination
- Inspect per-level LSP content for the exported destination
Explanation
Correct Answer
D:A mismatched level cannot reach the intended neighbors. Correct policy and level both affect regional visibility.
Incorrect Answers
A:Narrow policy constrains redistributed prefixes.
B:Uncommitted routes are not candidates for the active RIB.
C:A configured policy is not proof that remote routers received and selected it.
Question 210
The intended new prefix is locally active, but regional IS-IS neighbors never install it after a routing-policy edit. Independently, the review flags the potentially unsafe practice “Declare success based only on a policy syntax commit”. Which validation addresses the risk without assuming a particular cause?
- Check neighbor LSDB and active route for the destination
- Inspect source route and protocol eligibility
- Inspect per-level LSP content for the exported destination
- Replace import and export policy with unconditional accept all
Explanation
Correct Answer
A:Syntax validation cannot confirm remote installation. A configured policy is not proof that remote routers received and selected it.
Incorrect Answers
B:Export policy cannot advertise a route that is absent or unusable.
C:Correct policy and level both affect regional visibility.
D:Broad export can leak unrelated customer prefixes.
Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests