Juniper JN0-364 Exam Dumps, Practice Test Questions

100% Latest & Updated Juniper JN0-364 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Juniper JN0-364  Premium File
$54.99
$49.99

JN0-364 Premium File

  • Premium File: 69 Questions & Answers. Last update: Nov 9, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

JN0-364 Premium File

Juniper JN0-364  Premium File
  • Premium File: 69 Questions & Answers. Last update: Nov 9, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$54.99
$49.99

Juniper JN0-364 Practice Test 39

Question 380

Two neighboring switches have inconsistent MST region settings, and traffic for one VLAN follows an unintended blocked link. Independently, the review flags the potentially unsafe practice “Declare MST healthy solely from one common-instance state”. Which validation addresses the risk without assuming a particular cause?

  1. Compare MST instance state and representative VLAN traffic
  2. Inspect MST region digest and configuration consistency
  3. Set root policy once and assume all independent MST instances inherit desired roles
  4. Inspect VLAN-to-MSTI mapping on both switches

Explanation

Correct Answer

A:

A correct common instance does not ensure every mapped VLAN path. Configuration consistency still needs forwarding verification.

Incorrect Answers

B:

MST region compatibility affects boundary operation.

C:

Per-instance roles can differ.

D:

MSTP can share a topology across multiple VLANs per instance.

Question 381

A provider access switch has separate spanning-tree behavior for several VLANs using VSTP on supported hardware. The objective is to inspect VLAN-specific topology. Which Junos configuration or design action best satisfies the objective?

  1. Assume every ACX, MX, EX and QFX supports identical VSTP features
  2. Raise every bridge priority globally to fix one VLAN path
  3. Treat one default spanning-tree status as proof all VLAN instances are active
  4. Use per-VLAN spanning-tree output for the affected service

Explanation

Correct Answer

D:

VSTP can maintain separate logical tree decisions by VLAN.

Incorrect Answers

A:

Platform implementation can differ.

B:

Broad changes can disturb unrelated services.

C:

One instance may not cover a missing VLAN.

Question 382

A provider access switch has separate spanning-tree behavior for several VLANs using VSTP on supported hardware. The objective is to configure appropriate VLAN scope. Which operational choice should be prioritized in this design?

  1. Assume every ACX, MX, EX and QFX supports identical VSTP features
  2. Enable and map VSTP only for the intended supported VLANs
  3. Assume the root and blocked interfaces must be identical for every VSTP VLAN
  4. Raise every bridge priority globally to fix one VLAN path

Explanation

Correct Answer

B:

The relevant VLAN must participate in the configured tree.

Incorrect Answers

A:

Platform implementation can differ.

C:

Per-VLAN topology can select different ports.

D:

Broad changes can disturb unrelated services.

Question 383

A provider access switch has separate spanning-tree behavior for several VLANs using VSTP on supported hardware. The objective is to limit change impact. Which routing or switching control best fits the requirement?

  1. Assume the root and blocked interfaces must be identical for every VSTP VLAN
  2. Assess the affected VLAN before modifying root priorities or port settings
  3. Treat one default spanning-tree status as proof all VLAN instances are active
  4. Assume every ACX, MX, EX and QFX supports identical VSTP features

Explanation

Correct Answer

B:

A VLAN-specific problem may not justify a bridge-wide change.

Incorrect Answers

A:

Per-VLAN topology can select different ports.

C:

One instance may not cover a missing VLAN.

D:

Platform implementation can differ.

Question 384

A provider access switch has separate spanning-tree behavior for several VLANs using VSTP on supported hardware. The objective is to confirm protocol support. Which verification should be performed before approving the change?

  1. Check platform and Junos-release support for the selected spanning-tree variant
  2. Treat one default spanning-tree status as proof all VLAN instances are active
  3. Assume the root and blocked interfaces must be identical for every VSTP VLAN
  4. Raise every bridge priority globally to fix one VLAN path

Explanation

Correct Answer

A:

Feature availability differs across device families.

Incorrect Answers

B:

One instance may not cover a missing VLAN.

C:

Per-VLAN topology can select different ports.

D:

Broad changes can disturb unrelated services.

Question 385

A provider access switch has separate spanning-tree behavior for several VLANs using VSTP on supported hardware. Two objectives apply: (1) inspect VLAN-specific topology; and (2) limit change impact. Which TWO controls together satisfy the requirements? Choose TWO.

  1. Raise every bridge priority globally to fix one VLAN path
  2. Assume the root and blocked interfaces must be identical for every VSTP VLAN
  3. Assess the affected VLAN before modifying root priorities or port settings
  4. Assume every ACX, MX, EX and QFX supports identical VSTP features
  5. Use per-VLAN spanning-tree output for the affected service

Explanation

Correct Answers

C:

A VLAN-specific problem may not justify a bridge-wide change.

E:

VSTP can maintain separate logical tree decisions by VLAN.

Incorrect Answers

A:

Broad changes can disturb unrelated services.

B:

Per-VLAN topology can select different ports.

D:

Platform implementation can differ.

Question 386

A provider access switch has separate spanning-tree behavior for several VLANs using VSTP on supported hardware. Three objectives apply: (1) inspect VLAN-specific topology; (2) configure appropriate VLAN scope; and (3) confirm protocol support. Which THREE controls together satisfy the requirements? Choose THREE.

  1. Treat one default spanning-tree status as proof all VLAN instances are active
  2. Enable and map VSTP only for the intended supported VLANs
  3. Assume the root and blocked interfaces must be identical for every VSTP VLAN
  4. Assume every ACX, MX, EX and QFX supports identical VSTP features
  5. Use per-VLAN spanning-tree output for the affected service
  6. Check platform and Junos-release support for the selected spanning-tree variant

Explanation

Correct Answers

B:

The relevant VLAN must participate in the configured tree.

E:

VSTP can maintain separate logical tree decisions by VLAN.

F:

Feature availability differs across device families.

Incorrect Answers

A:

One instance may not cover a missing VLAN.

C:

Per-VLAN topology can select different ports.

D:

Platform implementation can differ.

Question 387

An engineer checks only a single generic root and misses a VLAN-specific blocked port that causes customer symptoms. Independently, the review flags the potentially unsafe practice “Assume the root and blocked interfaces must be identical for every VSTP VLAN”. Which inspection best evaluates that practice?

  1. Treat one default spanning-tree status as proof all VLAN instances are active
  2. Inspect VLAN-specific path cost and bridge priority
  3. Check supported features and operational VSTP state on the device
  4. Inspect the active VLAN's VSTP root and port roles

Explanation

Correct Answer

D:

Per-VLAN topology can select different ports. VSTP can maintain separate logical tree decisions by VLAN.

Incorrect Answers

A:

One instance may not cover a missing VLAN.

B:

A VLAN-specific problem may not justify a bridge-wide change.

C:

Feature availability differs across device families.

Question 388

An engineer checks only a single generic root and misses a VLAN-specific blocked port that causes customer symptoms. Independently, the review flags the potentially unsafe practice “Treat one default spanning-tree status as proof all VLAN instances are active”. Which evidence most directly tests the flagged assumption?

  1. Check supported features and operational VSTP state on the device
  2. Compare configured VSTP VLAN membership and service VLAN list
  3. Assume the root and blocked interfaces must be identical for every VSTP VLAN
  4. Inspect VLAN-specific path cost and bridge priority

Explanation

Correct Answer

B:

One instance may not cover a missing VLAN. The relevant VLAN must participate in the configured tree.

Incorrect Answers

A:

Feature availability differs across device families.

C:

Per-VLAN topology can select different ports.

D:

A VLAN-specific problem may not justify a bridge-wide change.

Question 389

An engineer checks only a single generic root and misses a VLAN-specific blocked port that causes customer symptoms. Independently, the review flags the potentially unsafe practice “Raise every bridge priority globally to fix one VLAN path”. Which diagnostic check tests this potentially unsafe choice?

  1. Assume the root and blocked interfaces must be identical for every VSTP VLAN
  2. Compare configured VSTP VLAN membership and service VLAN list
  3. Inspect VLAN-specific path cost and bridge priority
  4. Check supported features and operational VSTP state on the device

Explanation

Correct Answer

C:

Broad changes can disturb unrelated services. A VLAN-specific problem may not justify a bridge-wide change.

Incorrect Answers

A:

Per-VLAN topology can select different ports.

B:

The relevant VLAN must participate in the configured tree.

D:

Feature availability differs across device families.

Question 390

An engineer checks only a single generic root and misses a VLAN-specific blocked port that causes customer symptoms. Independently, the review flags the potentially unsafe practice “Assume every ACX, MX, EX and QFX supports identical VSTP features”. Which validation addresses the risk without assuming a particular cause?

  1. Compare configured VSTP VLAN membership and service VLAN list
  2. Check supported features and operational VSTP state on the device
  3. Assume the root and blocked interfaces must be identical for every VSTP VLAN
  4. Inspect VLAN-specific path cost and bridge priority

Explanation

Correct Answer

B:

Platform implementation can differ. Feature availability differs across device families.

Incorrect Answers

A:

The relevant VLAN must participate in the configured tree.

C:

Per-VLAN topology can select different ports.

D:

A VLAN-specific problem may not justify a bridge-wide change.

Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.