Juniper JN0-364 Exam Dumps, Practice Test Questions

100% Latest & Updated Juniper JN0-364 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Juniper JN0-364  Premium File
$54.99
$49.99

JN0-364 Premium File

  • Premium File: 69 Questions & Answers. Last update: Nov 9, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

JN0-364 Premium File

Juniper JN0-364  Premium File
  • Premium File: 69 Questions & Answers. Last update: Nov 9, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$54.99
$49.99

Juniper JN0-364 Practice Test 51

Question 500

Adjacencies stay Up after adding IPv6, but the target remote PE lacks IPv6 reachability TLVs and routes. Independently, the review flags the potentially unsafe practice “Disable healthy IPv4 forwarding to force IPv6 route convergence”. Which validation addresses the risk without assuming a particular cause?

  1. Inspect inet6.0 for the intended remote route
  2. Assume every IPv4 IS-IS route is automatically duplicated into inet6.0
  3. Inspect originated and received IPv6 prefix TLVs
  4. Run separate IPv4 and IPv6 reachability probes

Explanation

Correct Answer

D:

Breaking the existing family is not an IPv6 validation method. One address family's success does not validate the other.

Incorrect Answers

A:

Advertised IPv6 routes still require valid forwarding resolution.

B:

IPv6 needs its own supported reachability advertisement.

C:

Link-state TLV content determines advertised IPv6 reachability.

Question 501

A customer edge and provider edge are BGP Established for IPv4, but 2001:db8:abcd::/48 is not learned after a dual-stack expansion. The objective is to negotiate IPv6 address family. Which Junos configuration or design action best satisfies the objective?

  1. Copy IPv4 prefix-only filters and assume all IPv6 networks match
  2. Declare IPv6 BGP operational solely because IPv4 prefix counters rise
  3. Use an unreachable IPv4-only next hop for every IPv6 route
  4. Verify both peers support and activate IPv6 unicast NLRI where intended

Explanation

Correct Answer

D:

BGP Established for one family does not prove support for another.

Incorrect Answers

A:

An IPv4 prefix filter does not select IPv6 addresses.

B:

IPv4 route counts do not validate IPv6 family exchange.

C:

Unsupported or unreachable next-hop attributes prevent forwarding.

Question 502

A customer edge and provider edge are BGP Established for IPv4, but 2001:db8:abcd::/48 is not learned after a dual-stack expansion. The objective is to check IPv6 routing policy. Which operational choice should be prioritized in this design?

  1. Apply appropriate import and export policies for inet6 reachability
  2. Assume an IPv4-only BGP session always exchanges IPv6 reachability
  3. Declare IPv6 BGP operational solely because IPv4 prefix counters rise
  4. Use an unreachable IPv4-only next hop for every IPv6 route

Explanation

Correct Answer

A:

An enabled family may exchange zero accepted routes under policy.

Incorrect Answers

B:

Multiprotocol capability or family configuration controls IPv6 route exchange.

C:

IPv4 route counts do not validate IPv6 family exchange.

D:

Unsupported or unreachable next-hop attributes prevent forwarding.

Question 503

A customer edge and provider edge are BGP Established for IPv4, but 2001:db8:abcd::/48 is not learned after a dual-stack expansion. The objective is to verify IPv6 next-hop. Which routing or switching control best fits the requirement?

  1. Copy IPv4 prefix-only filters and assume all IPv6 networks match
  2. Ensure the MP-BGP next-hop address resolves in the intended IPv6 routing context
  3. Assume an IPv4-only BGP session always exchanges IPv6 reachability
  4. Declare IPv6 BGP operational solely because IPv4 prefix counters rise

Explanation

Correct Answer

B:

IPv6 BGP next-hop resolution can fail independently of IPv4 peering.

Incorrect Answers

A:

An IPv4 prefix filter does not select IPv6 addresses.

C:

Multiprotocol capability or family configuration controls IPv6 route exchange.

D:

IPv4 route counts do not validate IPv6 family exchange.

Question 504

A customer edge and provider edge are BGP Established for IPv4, but 2001:db8:abcd::/48 is not learned after a dual-stack expansion. The objective is to check advertised and active routes. Which verification should be performed before approving the change?

  1. Assume an IPv4-only BGP session always exchanges IPv6 reachability
  2. Copy IPv4 prefix-only filters and assume all IPv6 networks match
  3. Compare IPv6 routes advertised by the peer to active inet6.0 entries
  4. Use an unreachable IPv4-only next hop for every IPv6 route

Explanation

Correct Answer

C:

Receipt, acceptance and route selection are separate steps.

Incorrect Answers

A:

Multiprotocol capability or family configuration controls IPv6 route exchange.

B:

An IPv4 prefix filter does not select IPv6 addresses.

D:

Unsupported or unreachable next-hop attributes prevent forwarding.

Question 505

A customer edge and provider edge are BGP Established for IPv4, but 2001:db8:abcd::/48 is not learned after a dual-stack expansion. Two objectives apply: (1) negotiate IPv6 address family; and (2) verify IPv6 next-hop. Which TWO controls together satisfy the requirements? Choose TWO.

  1. Ensure the MP-BGP next-hop address resolves in the intended IPv6 routing context
  2. Declare IPv6 BGP operational solely because IPv4 prefix counters rise
  3. Verify both peers support and activate IPv6 unicast NLRI where intended
  4. Assume an IPv4-only BGP session always exchanges IPv6 reachability
  5. Use an unreachable IPv4-only next hop for every IPv6 route

Explanation

Correct Answers

A:

IPv6 BGP next-hop resolution can fail independently of IPv4 peering.

C:

BGP Established for one family does not prove support for another.

Incorrect Answers

B:

IPv4 route counts do not validate IPv6 family exchange.

D:

Multiprotocol capability or family configuration controls IPv6 route exchange.

E:

Unsupported or unreachable next-hop attributes prevent forwarding.

Question 506

A customer edge and provider edge are BGP Established for IPv4, but 2001:db8:abcd::/48 is not learned after a dual-stack expansion. Three objectives apply: (1) negotiate IPv6 address family; (2) check IPv6 routing policy; and (3) check advertised and active routes. Which THREE controls together satisfy the requirements? Choose THREE.

  1. Use an unreachable IPv4-only next hop for every IPv6 route
  2. Copy IPv4 prefix-only filters and assume all IPv6 networks match
  3. Verify both peers support and activate IPv6 unicast NLRI where intended
  4. Apply appropriate import and export policies for inet6 reachability
  5. Declare IPv6 BGP operational solely because IPv4 prefix counters rise
  6. Compare IPv6 routes advertised by the peer to active inet6.0 entries

Explanation

Correct Answers

C:

BGP Established for one family does not prove support for another.

D:

An enabled family may exchange zero accepted routes under policy.

F:

Receipt, acceptance and route selection are separate steps.

Incorrect Answers

A:

Unsupported or unreachable next-hop attributes prevent forwarding.

B:

An IPv4 prefix filter does not select IPv6 addresses.

E:

IPv4 route counts do not validate IPv6 family exchange.

Question 507

The IPv4 peer exchanges prefixes while the IPv6 address-family route remains absent due to family capability or policy configuration. Independently, the review flags the potentially unsafe practice “Assume an IPv4-only BGP session always exchanges IPv6 reachability”. Which inspection best evaluates that practice?

  1. Inspect negotiated BGP address families for the session
  2. Copy IPv4 prefix-only filters and assume all IPv6 networks match
  3. Inspect IPv6 advertised routes and local inet6.0 state
  4. Inspect received MP_REACH next-hop and inet6 resolution

Explanation

Correct Answer

A:

Multiprotocol capability or family configuration controls IPv6 route exchange. BGP Established for one family does not prove support for another.

Incorrect Answers

B:

An IPv4 prefix filter does not select IPv6 addresses.

C:

Receipt, acceptance and route selection are separate steps.

D:

IPv6 BGP next-hop resolution can fail independently of IPv4 peering.

Question 508

The IPv4 peer exchanges prefixes while the IPv6 address-family route remains absent due to family capability or policy configuration. Independently, the review flags the potentially unsafe practice “Copy IPv4 prefix-only filters and assume all IPv6 networks match”. Which evidence most directly tests the flagged assumption?

  1. Inspect received MP_REACH next-hop and inet6 resolution
  2. Inspect inet6 import and export policy matches
  3. Declare IPv6 BGP operational solely because IPv4 prefix counters rise
  4. Inspect negotiated BGP address families for the session

Explanation

Correct Answer

B:

An IPv4 prefix filter does not select IPv6 addresses. An enabled family may exchange zero accepted routes under policy.

Incorrect Answers

A:

IPv6 BGP next-hop resolution can fail independently of IPv4 peering.

C:

IPv4 route counts do not validate IPv6 family exchange.

D:

BGP Established for one family does not prove support for another.

Question 509

The IPv4 peer exchanges prefixes while the IPv6 address-family route remains absent due to family capability or policy configuration. Independently, the review flags the potentially unsafe practice “Use an unreachable IPv4-only next hop for every IPv6 route”. Which diagnostic check tests this potentially unsafe choice?

  1. Inspect negotiated BGP address families for the session
  2. Inspect IPv6 advertised routes and local inet6.0 state
  3. Copy IPv4 prefix-only filters and assume all IPv6 networks match
  4. Inspect received MP_REACH next-hop and inet6 resolution

Explanation

Correct Answer

D:

Unsupported or unreachable next-hop attributes prevent forwarding. IPv6 BGP next-hop resolution can fail independently of IPv4 peering.

Incorrect Answers

A:

BGP Established for one family does not prove support for another.

B:

Receipt, acceptance and route selection are separate steps.

C:

An IPv4 prefix filter does not select IPv6 addresses.

Question 510

The IPv4 peer exchanges prefixes while the IPv6 address-family route remains absent due to family capability or policy configuration. Independently, the review flags the potentially unsafe practice “Declare IPv6 BGP operational solely because IPv4 prefix counters rise”. Which validation addresses the risk without assuming a particular cause?

  1. Assume an IPv4-only BGP session always exchanges IPv6 reachability
  2. Inspect inet6 import and export policy matches
  3. Inspect IPv6 advertised routes and local inet6.0 state
  4. Inspect received MP_REACH next-hop and inet6 resolution

Explanation

Correct Answer

C:

IPv4 route counts do not validate IPv6 family exchange. Receipt, acceptance and route selection are separate steps.

Incorrect Answers

A:

Multiprotocol capability or family configuration controls IPv6 route exchange.

B:

An enabled family may exchange zero accepted routes under policy.

D:

IPv6 BGP next-hop resolution can fail independently of IPv4 peering.

Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.