Juniper JN0-650 Exam Dumps, Practice Test Questions

100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Juniper JN0-650  Premium File
$54.99
$49.99

JN0-650 Premium File

  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

JN0-650 Premium File

Juniper JN0-650  Premium File
  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$54.99
$49.99

Juniper JN0-650 Practice Test 101

Question 1000

A network change is required for the following specific situation: A branch link should pace scheduled traffic to a slower uplink yet the team only drops excess packets abruptly. Which corrective action is most appropriate?

  1. Associate the approved scheduler map with the correct egress interface and confirm class queue counters.
  2. Configure supported egress shaping at the bottleneck and verify throughput and queue behavior.
  3. Apply the appropriate interface rewrite rule and verify the contract-specific egress code points.
  4. Map the two packet categories to the intended PLP levels and verify drop-profile response.

Explanation

Correct Answer

B:

Shaping buffers and schedules outgoing traffic to a rate, unlike policing which marks or discards traffic exceeding a contract. Verify this by checking that outgoing traffic conforms to the contracted rate with acceptable delay and fewer burst losses.

Incorrect Answers

A:

“Associate the approved scheduler map with the correct egress interface and confirm class queue counters” belongs to a separate Class of Service (CoS) issue: a campus has configured forwarding classes and schedulers but one uplink carries all traffic through default service because association is missing. It does not explain the condition tested here.

C:

“Apply the appropriate interface rewrite rule and verify the contract-specific egress code points” belongs to a separate Class of Service (CoS) issue: a provider handoff expects specific code-point markings yet a trunk rewrites every service class to default behavior. It does not explain the condition tested here.

D:

“Map the two packet categories to the intended PLP levels and verify drop-profile response” belongs to a separate Class of Service (CoS) issue: a business wants out-of-profile marked traffic to drop earlier than in-profile traffic within one forwarding class. It does not explain the condition tested here.

Question 1001

A Junos enterprise team investigates this incident: Video gets dropped under congestion despite spare capacity because its queue has a too-small delay buffer. Which technical explanation most directly identifies the cause or design principle?

  1. Shaping buffers and schedules outgoing traffic to a rate, unlike policing which marks or discards traffic exceeding a contract.
  2. CoS rewrite must reflect trusted classifications and intended forwarding policy, not arbitrary source markings.
  3. Queue schedulers and buffer parameters influence service rate and delay/drop behavior at congested egress.
  4. Multifield classification can use packet fields for policy distinctions beyond incoming BA header code-point classification.

Explanation

Correct Answer

C:

Queue schedulers and buffer parameters influence service rate and delay/drop behavior at congested egress. The appropriate response is to review queue buffer and scheduler allocations against traffic measurements and apply a bounded adjustment.

Incorrect Answers

A:

“Shaping buffers and schedules outgoing traffic to a rate, unlike policing which marks or discards traffic exceeding a contract” belongs to a separate Class of Service (CoS) issue: a WAN customer requires smooth outbound transmission but an ingress drop policer creates unnecessary burst loss. It does not explain the condition tested here.

B:

“CoS rewrite must reflect trusted classifications and intended forwarding policy, not arbitrary source markings” belongs to a separate Class of Service (CoS) issue: a branch egress rewriter incorrectly gives bulk backups the same DSCP as real-time voice. It does not explain the condition tested here.

D:

“Multifield classification can use packet fields for policy distinctions beyond incoming BA header code-point classification” belongs to a separate Class of Service (CoS) issue: a security function needs to classify a subset of traffic by source and destination criteria rather than trusted external markings. It does not explain the condition tested here.

Question 1002

Select THREE complementary corrective, verification, or preventive controls for this scenario: A legacy printer can join after MAC authentication yet is allowed to reach sensitive management segments.

  1. Give MAC-authenticated devices the same unrestricted access as strongly authenticated employees.
  2. Assign the authenticated device to the authorized restricted network profile and verify effective VLAN/filter.
  3. Treat rejected credentials and no-supplicant detection as the same unconditional guest-access event.
  4. Configure unrestricted access as the universal RADIUS-outage fallback for sensitive access ports.
  5. The known device reaches only permitted destinations and cannot reach employee or management resources.
  6. Review authorization policies for MAC endpoints against a least-privilege access matrix.

Explanation

Correct Answers

B:

Correction: MAC authorization should couple weak identity to constrained role-based network access, not just a successful RADIUS decision.

E:

Confirmation: Assign the authenticated device to the authorized restricted network profile and verify effective VLAN/filter.

F:

Prevention of recurrence: MAC authorization should couple weak identity to constrained role-based network access, not just a successful RADIUS decision.

Incorrect Answers

A:

“Give MAC-authenticated devices the same unrestricted access as strongly authenticated employees” does not address MAC authorization should couple weak identity to constrained role-based network access, not just a successful RADIUS decision.

C:

“Treat rejected credentials and no-supplicant detection as the same unconditional guest-access event” is an unsafe response to a different problem: a credential-rejected user is sent to the guest VLAN even though the planned design reserves guest VLAN for silent non-supplicants. It is not a valid fix here.

D:

“Configure unrestricted access as the universal RADIUS-outage fallback for sensitive access ports” is an unsafe response to a different problem: after a RADIUS outage, the access switch opens ports broadly instead of applying the approved restricted server-fail VLAN. It is not a valid fix here.

Question 1003

A Junos enterprise team investigates this incident: A voice VLAN is configured correctly yet the switch's trust and rewrite policy fails to preserve the required phone traffic classification. Which technical explanation most directly identifies the cause or design principle?

  1. Voice VLAN placement and CoS marking are related but separate; correct VLAN tagging does not guarantee priority handling.
  2. PoE availability depends on the supported per-port power class and total switch power budget, not just Ethernet link status.
  3. Physical PoE delivery and negotiated device power requirements must match switch and endpoint capabilities.
  4. PoE priority is a tool for allocating scarce power among endpoints when the chassis budget is constrained.

Explanation

Correct Answer

A:

Voice VLAN placement and CoS marking are related but separate; correct VLAN tagging does not guarantee priority handling. The appropriate response is to verify ingress voice classification, LLDP-MED policy and egress rewrite treatment for voice media.

Incorrect Answers

B:

“PoE availability depends on the supported per-port power class and total switch power budget, not just Ethernet link status” belongs to a separate IP Telephony Features issue: a voice handset fails to boot on an EX switch port after new cameras consume the remaining PoE budget. It does not explain the condition tested here.

C:

“Physical PoE delivery and negotiated device power requirements must match switch and endpoint capabilities” belongs to a separate IP Telephony Features issue: a phone's LLDP-negotiated power demand exceeds its access port's allocated PoE limit and it repeatedly restarts. It does not explain the condition tested here.

D:

“PoE priority is a tool for allocating scarce power among endpoints when the chassis budget is constrained” belongs to a separate IP Telephony Features issue: a switch assigns equal PoE power priority to every port and disconnects an emergency phone before low-priority signage during a power shortage. It does not explain the condition tested here.

Question 1004

To prevent recurrence of this precise networking failure, which practice should be adopted? A VSTP network intended to send voice and data VLANs over different active paths instead blocks both on the same uplink.

  1. Scope and monitor tunneled L2 control protocols to prevent control-plane abuse.
  2. Include packet-capture verification of S-tag and C-tag transformation in provider handoffs.
  3. Test private-port isolation and uplink reachability after access topology changes.
  4. Test each critical VLAN's root bridge and forwarding path after VSTP updates.

Explanation

Correct Answer

D:

Test each critical VLAN's root bridge and forwarding path after VSTP updates. This guards against VSTP provides per-VLAN spanning-tree behavior for compatibility and path control when the design and platform support it.

Incorrect Answers

A:

“Scope and monitor tunneled L2 control protocols to prevent control-plane abuse” belongs to a separate Ethernet Switching and Spanning Tree issue: an 802.1Q trunk carries customer data through a provider Ethernet segment but fails to forward the required spanning-tree control frames transparently. It does not explain the condition tested here.

B:

“Include packet-capture verification of S-tag and C-tag transformation in provider handoffs” belongs to a separate Ethernet Switching and Spanning Tree issue: customer traffic emerges with the provider service tag still attached and is rejected by an endpoint expecting ordinary Ethernet. It does not explain the condition tested here.

C:

“Test private-port isolation and uplink reachability after access topology changes” belongs to a separate Ethernet Switching and Spanning Tree issue: a lab uses one primary VLAN for many tenants but isolated access ports can still exchange Layer 2 frames after a misconfiguration. It does not explain the condition tested here.

Question 1005

A Junos enterprise team investigates this incident: An EVPN-VXLAN frame is dropped over a path where the IP underlay MTU was sized only for unencapsulated Ethernet payloads. Which technical explanation most directly identifies the cause or design principle?

  1. VXLAN adds encapsulation overhead, so underlay MTU must accommodate the intended overlay frame size.
  2. EVPN route types carry different information: Type 1 Ethernet auto-discovery, Type 2 MAC/IP, Type 3 inclusive multicast.
  3. EVPN Type 2 MAC/IP advertisement carries endpoint reachability and mobility information in the control plane.
  4. EVPN Type 3 inclusive multicast routes announce interested VTEPs for a broadcast domain's BUM replication set.

Explanation

Correct Answer

A:

VXLAN adds encapsulation overhead, so underlay MTU must accommodate the intended overlay frame size. The appropriate response is to test larger encapsulated frames and align supported underlay and overlay MTUs without disabling unrelated protections.

Incorrect Answers

B:

“EVPN route types carry different information: Type 1 Ethernet auto-discovery, Type 2 MAC/IP, Type 3 inclusive multicast” belongs to a separate EVPN issue: a fabric advertises Type 3 routes and claims this proves specific remote host MACs are reachable. It does not explain the condition tested here.

C:

“EVPN Type 2 MAC/IP advertisement carries endpoint reachability and mobility information in the control plane” belongs to a separate EVPN issue: a host moves between leafs and the destination leaf still forwards toward the previous MAC location. It does not explain the condition tested here.

D:

“EVPN Type 3 inclusive multicast routes announce interested VTEPs for a broadcast domain's BUM replication set” belongs to a separate EVPN issue: a VNI is active on two leafs but unknown-unicast or broadcast replication never reaches the remote side. It does not explain the condition tested here.

Question 1006

Which suggested shortcut would be especially unsafe for this exact situation? An uplink meets long-term bandwidth policy but legitimate short bursts exceed the token-bucket allowance.

  1. Audit DSCP preservation and remarking at untrusted edge boundaries.
  2. Keep queue drop-profile acceptance tests and monitor production congestion before broad rollout.
  3. Raise the permitted long-term traffic rate indefinitely rather than evaluating burst-size configuration.
  4. Keep a documented forwarding-class inventory and test default mappings after service changes.

Explanation

Correct Answer

C:

The tempting alternative fails because policing behavior depends on both committed rate and burst tolerance; a badly chosen burst parameter can penalize valid traffic. The supported action is to measure burst patterns and adjust the policer burst configuration within the authorized service contract.

Incorrect Answers

A:

That prevention measure relates to a customer access switch trusts external CoS bits and redistributes high-priority markings to all guest traffic.; it is not the unsafe shortcut described here.

B:

That prevention measure relates to a RED drop profile is applied too aggressively and drops packets even under moderate load.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to a forwarding-class configuration sends critical routing packets to a queue used for bulk backups and adjacency stability degrades under load.; it is not the unsafe shortcut described here.

Question 1007

The team believes it has resolved this Junos issue: OSPFv3 peering comes up but the desired IPv6 loopback is not in the routing database after a rollout. Which observation best verifies the specific intended result?

  1. Neighbor states and DR/BDR assignments match the approved design following a managed election.
  2. The remote inet6.0 table learns the intended loopback and reachability testing succeeds.
  3. No router-ID collision appears and OSPF paths stabilize with expected next hops.
  4. Only authorized static prefixes appear as OSPF externals; management prefixes remain local.

Explanation

Correct Answer

B:

The remote inet6.0 table learns the intended loopback and reachability testing succeeds. This checks the relevant result after inspect IPv6 interface addresses and OSPFv3 interface participation, then add the intended loopback advertisement within policy.

Incorrect Answers

A:

“Neighbor states and DR/BDR assignments match the approved design following a managed election” belongs to a separate Interior Gateway Protocols (IGPs) issue: an aggregation broadcast VLAN has a DR/BDR placement that conflicts with the approved design after a maintenance reboot. It does not explain the condition tested here.

C:

“No router-ID collision appears and OSPF paths stabilize with expected next hops” belongs to a separate Interior Gateway Protocols (IGPs) issue: two newly deployed distribution switches report identical OSPF router IDs, causing inconsistent LSAs in the area. It does not explain the condition tested here.

D:

“Only authorized static prefixes appear as OSPF externals; management prefixes remain local” belongs to a separate Interior Gateway Protocols (IGPs) issue: an ABR starts leaking a management static route into the enterprise IGP after a permissive export term was introduced. It does not explain the condition tested here.

Question 1008

The team believes it has resolved this Junos issue: An OSPFv3 adjacency on a dual-stack campus changes state because engineers treat IPv4 interface reachability as proof of IPv6 control-plane health. Which observation best verifies the specific intended result?

  1. The peers advance to Full and successfully exchange database summaries after an approved aligned-MTU change.
  2. The expected prefix becomes active locally while unwanted external prefixes remain filtered.
  3. Stable Hellos and Full neighbor state persist through repeated protocol interval checks.
  4. The affected link passes OSPFv3 neighbor and IPv6 reachability checks rather than IPv4-only tests.

Explanation

Correct Answer

D:

The affected link passes OSPFv3 neighbor and IPv6 reachability checks rather than IPv4-only tests. This checks the relevant result after check IPv6 link-local addressing, OSPFv3 neighbor state and relevant ICMPv6 connectivity on the actual interface.

Incorrect Answers

A:

“The peers advance to Full and successfully exchange database summaries after an approved aligned-MTU change” belongs to a separate Interior Gateway Protocols (IGPs) issue: two EX distribution routers in OSPF area 0 remain in ExStart after a new transit VLAN uses inconsistent interface MTUs. It does not explain the condition tested here.

B:

“The expected prefix becomes active locally while unwanted external prefixes remain filtered” belongs to a separate Interior Gateway Protocols (IGPs) issue: an OSPF import policy hides external routes on one device while neighbors retain them, confusing the team reviewing reachability. It does not explain the condition tested here.

C:

“Stable Hellos and Full neighbor state persist through repeated protocol interval checks” belongs to a separate Interior Gateway Protocols (IGPs) issue: two OSPF routers on a shared transit segment report different Hello and dead intervals and never establish adjacency. It does not explain the condition tested here.

Question 1009

A Junos enterprise team investigates this incident: A RED drop profile is applied too aggressively and drops packets even under moderate load. Which technical explanation most directly identifies the cause or design principle?

  1. CoS rewrite must reflect trusted classifications and intended forwarding policy, not arbitrary source markings.
  2. Forwarding classes select output queues; an incorrect class-to-queue association can cause head-of-line delays.
  3. A policer enforces traffic rate or burst limits and can discard or mark out-of-profile input; shaping buffers traffic for paced egress.
  4. Drop profiles and weighted random early detection influence probabilistic discard thresholds as queue fill rises.

Explanation

Correct Answer

D:

Drop profiles and weighted random early detection influence probabilistic discard thresholds as queue fill rises. The appropriate response is to review configured drop probability versus fill level and align the profile with acceptable congestion targets.

Incorrect Answers

A:

“CoS rewrite must reflect trusted classifications and intended forwarding policy, not arbitrary source markings” belongs to a separate Class of Service (CoS) issue: a customer access switch trusts external CoS bits and redistributes high-priority markings to all guest traffic. It does not explain the condition tested here.

B:

“Forwarding classes select output queues; an incorrect class-to-queue association can cause head-of-line delays” belongs to a separate Class of Service (CoS) issue: a forwarding-class configuration sends critical routing packets to a queue used for bulk backups and adjacency stability degrades under load. It does not explain the condition tested here.

C:

“A policer enforces traffic rate or burst limits and can discard or mark out-of-profile input; shaping buffers traffic for paced egress” belongs to a separate Class of Service (CoS) issue: a branch wants to enforce a traffic contract on an incoming service flow yet applies policing to an unrelated egress path. It does not explain the condition tested here.

Question 1010

For this case, select TWO complementary measures or outcome checks that directly resolve the problem: An emergency intercom can establish Ethernet link but loses power during activity because its PD class is not supported by that port.

  1. Put the phone and PC on one unrestricted VLAN to avoid checking voice VLAN tagging.
  2. Declare the voice QoS requirement met solely because the handset acquired an address in the voice VLAN.
  3. Inspect PoE class, per-port priority and available chassis budget, and move to a supported powered port if needed.
  4. Assume a green Ethernet link light proves an endpoint has its required operating power.
  5. The device stays powered during peak consumption and Junos reports no power-denial events.

Explanation

Correct Answers

C:

Inspect PoE class, per-port priority and available chassis budget, and move to a supported powered port if needed. This addresses the dependency that physical PoE delivery and negotiated device power requirements must match switch and endpoint capabilities.

E:

The device stays powered during peak consumption and Junos reports no power-denial events. The specific steps required are to inspect PoE class, per-port priority and available chassis budget, and move to a supported powered port if needed.

Incorrect Answers

A:

“Put the phone and PC on one unrestricted VLAN to avoid checking voice VLAN tagging” is an unsafe response to a different problem: a phone-with-PC desk deployment lets the PC reach data services while the tagged voice stream is dropped by VLAN membership. It is not a valid fix here.

B:

“Declare the voice QoS requirement met solely because the handset acquired an address in the voice VLAN” is an unsafe response to a different problem: a voice VLAN is configured correctly yet the switch's trust and rewrite policy fails to preserve the required phone traffic classification. It is not a valid fix here.

D:

“Assume a green Ethernet link light proves an endpoint has its required operating power” does not address physical PoE delivery and negotiated device power requirements must match switch and endpoint capabilities.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.