Juniper JN0-650 Exam Dumps, Practice Test Questions

100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Juniper JN0-650  Premium File
$54.99
$49.99

JN0-650 Premium File

  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

JN0-650 Premium File

Juniper JN0-650  Premium File
  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$54.99
$49.99

Juniper JN0-650 Practice Test 103

Question 1020

The team believes it has resolved this Junos issue: A new L3 VLAN permits unicast connectivity but the PIM Hello adjacency remains absent on the active path. Which observation best verifies the specific intended result?

  1. The required PIM neighbors appear and downstream join state tracks active interested receivers.
  2. Only the specified source delivers data to receivers of the chosen SSM group.
  3. The selected upstream RPF neighbor and packet arrival interface agree, restoring intended multicast flow.
  4. Receivers subscribed to the intended (S,G) get traffic while nonselected sources cannot join that flow.

Explanation

Correct Answer

A:

The required PIM neighbors appear and downstream join state tracks active interested receivers. This checks the relevant result after enable PIM on the approved routed VLAN interface and inspect neighbor and join state.

Incorrect Answers

B:

“Only the specified source delivers data to receivers of the chosen SSM group” belongs to a separate IP Multicast issue: a campus multicast application migrates ASM clients to SSM but does not update the source-qualified membership requests. It does not explain the condition tested here.

C:

“The selected upstream RPF neighbor and packet arrival interface agree, restoring intended multicast flow” belongs to a separate IP Multicast issue: a multicast team changes unicast routing yet an engineered multicast RPF table still points to an obsolete next hop. It does not explain the condition tested here.

D:

“Receivers subscribed to the intended (S,G) get traffic while nonselected sources cannot join that flow” instead concerns another network scenario: A video source is known and receivers support IGMPv3, but engineers configure ASM and an RP unnecessarily for the source-specific application. It does not address the requirement here.

Question 1021

The team believes it has resolved this Junos issue: A legacy interop design needs separate per-VLAN spanning-tree compatibility but all VLANs inherit one unsuitable tree. Which observation best verifies the specific intended result?

  1. Matching test traffic enters the quarantine VLAN while ordinary traffic stays in the expected VLAN.
  2. Selected voice and data VLANs use the approved active links without loops.
  3. The retired VLAN disappears from unintended trunks and valid registered VLANs remain reachable.
  4. Two isolated tenant ports cannot reach each other but can reach the permitted gateway uplink.

Explanation

Correct Answer

B:

Selected voice and data VLANs use the approved active links without loops. This checks the relevant result after inspect VSTP VLAN membership, root priority and port roles, then repair the intended per-VLAN root arrangement.

Incorrect Answers

A:

“Matching test traffic enters the quarantine VLAN while ordinary traffic stays in the expected VLAN” belongs to a separate Ethernet Switching and Spanning Tree issue: a campus onboarding policy puts cameras on the normal data VLAN even though a targeted filter-based VLAN should steer them. It does not explain the condition tested here.

C:

“The retired VLAN disappears from unintended trunks and valid registered VLANs remain reachable” belongs to a separate Ethernet Switching and Spanning Tree issue: a campus migration removes a VLAN at the source while a trunk continues advertising it unexpectedly. It does not explain the condition tested here.

D:

“Two isolated tenant ports cannot reach each other but can reach the permitted gateway uplink” belongs to a separate Ethernet Switching and Spanning Tree issue: a lab uses one primary VLAN for many tenants but isolated access ports can still exchange Layer 2 frames after a misconfiguration. It does not explain the condition tested here.

Question 1022

To prevent recurrence of this precise networking failure, which practice should be adopted? An IPv6-only branch has OSPFv3 Hellos on the wrong logical unit after interface renumbering, so no IPv6 routes appear.

  1. Reserve router IDs from a centrally managed inventory before zero-touch provisioning.
  2. Record both LSDB presence and local RIB installation in OSPF troubleshooting runbooks.
  3. Validate per-interface OSPF area assignments from an approved topology matrix before commit.
  4. Validate active logical-interface mappings and IPv6 adjacency as part of change acceptance.

Explanation

Correct Answer

D:

Validate active logical-interface mappings and IPv6 adjacency as part of change acceptance. This guards against OSPFv3 adjacency depends on participating interfaces and valid IPv6 link-local neighbor communication.

Incorrect Answers

A:

“Reserve router IDs from a centrally managed inventory before zero-touch provisioning” belongs to a separate Interior Gateway Protocols (IGPs) issue: two newly deployed distribution switches report identical OSPF router IDs, causing inconsistent LSAs in the area. It does not explain the condition tested here.

B:

“Record both LSDB presence and local RIB installation in OSPF troubleshooting runbooks” belongs to a separate Interior Gateway Protocols (IGPs) issue: a core node shows a missing route while remote LSDBs include the corresponding external LSA after a local policy change. It does not explain the condition tested here.

C:

“Validate per-interface OSPF area assignments from an approved topology matrix before commit” belongs to a separate Interior Gateway Protocols (IGPs) issue: a campus OSPF interface is accidentally placed in area 0 while its neighbor advertises a nonbackbone area, preventing a Full adjacency. It does not explain the condition tested here.

Question 1023

The team believes it has resolved this Junos issue: A dual-homed site changes internal LOCAL_PREF but sees no change in the other autonomous system's inbound traffic choice. Which observation best verifies the specific intended result?

  1. The downstream client learns approved prefixes and cluster-loop checks remain operational.
  2. External peer advertisements show the intended supported attributes and inbound traffic is measured.
  3. Route detail shows a reachable next hop and end-to-end forwarding through the intended border router.
  4. The selected BGP route reflects the intended higher LOCAL_PREF, and traceroute follows the approved exit.

Explanation

Correct Answer

B:

External peer advertisements show the intended supported attributes and inbound traffic is measured. This checks the relevant result after select a permitted inbound traffic-engineering mechanism with the provider, such as suitable AS-path prepending or agreed communities.

Incorrect Answers

A:

“The downstream client learns approved prefixes and cluster-loop checks remain operational” belongs to a separate Border Gateway Protocol (BGP) issue: a full-mesh iBGP design is converted to route reflection but one peer is treated as an ordinary nonclient and route propagation fails. It does not explain the condition tested here.

C:

“Route detail shows a reachable next hop and end-to-end forwarding through the intended border router” belongs to a separate Border Gateway Protocol (BGP) issue: a route-reflector client receives an external destination but lacks the underlay path to the advertised next hop. It does not explain the condition tested here.

D:

“The selected BGP route reflects the intended higher LOCAL_PREF, and traceroute follows the approved exit” belongs to a separate Border Gateway Protocol (BGP) issue: an enterprise chooses a different BGP exit after import policy assigns a higher local preference to the backup path. It does not explain the condition tested here.

Question 1024

A network change is required for the following specific situation: The local AS appears in a received external BGP AS_PATH and the route is rejected despite valid prefix reachability. Which corrective action is most appropriate?

  1. Inspect active-route selection and the advertise-inactive configuration; keep it only if the external requirement justifies it.
  2. Inspect hidden-route reason, incoming attributes and import-policy decisions, then correct the authorized match.
  3. Inspect per-route local preferences and import policy; set the intended exit's LOCAL_PREF consistently.
  4. Check the advertised AS sequence and correct the peering or routing design instead of bypassing loop checks.

Explanation

Correct Answer

D:

The default BGP AS-path loop check rejects routes containing the local autonomous system to prevent loops. Verify this by checking that the route is accepted only after the AS-path loop is removed, with stable forwarding.

Incorrect Answers

A:

“Inspect active-route selection and the advertise-inactive configuration; keep it only if the external requirement justifies it” belongs to a separate Border Gateway Protocol (BGP) issue: an engineer adds advertise-inactive and downstream peers begin receiving a BGP route that loses to an OSPF route locally. It does not explain the condition tested here.

B:

“Inspect hidden-route reason, incoming attributes and import-policy decisions, then correct the authorized match” belongs to a separate Border Gateway Protocol (BGP) issue: a Junos route is hidden by import policy, but the team troubleshoots only local physical interfaces. It does not explain the condition tested here.

C:

“Inspect per-route local preferences and import policy; set the intended exit's LOCAL_PREF consistently” belongs to a separate Border Gateway Protocol (BGP) issue: two iBGP exits offer equal reachable routes but the one with higher LOCAL_PREF is not the egress an operator expected. It does not explain the condition tested here.

Question 1025

To prevent recurrence of this precise networking failure, which practice should be adopted? A dynamic VLAN is removed from one edge but stale MVRP registration keeps an unused VLAN active downstream.

  1. Document primary/secondary VLAN mappings and test permitted peer groups and isolation boundaries.
  2. Track VLAN lifecycle and MVRP registration ownership as ports are decommissioned.
  3. Test private-port isolation and uplink reachability after access topology changes.
  4. Check policy coverage and unintended-match cases before activating filter-based steering.

Explanation

Correct Answer

B:

Track VLAN lifecycle and MVRP registration ownership as ports are decommissioned. This guards against MVRP registrations can persist where membership state or participation has not been updated consistently.

Incorrect Answers

A:

“Document primary/secondary VLAN mappings and test permitted peer groups and isolation boundaries” belongs to a separate Ethernet Switching and Spanning Tree issue: members of the same trusted workgroup are accidentally placed in isolated rather than community PVLAN ports and lose peer communication. It does not explain the condition tested here.

C:

“Test private-port isolation and uplink reachability after access topology changes” belongs to a separate Ethernet Switching and Spanning Tree issue: a lab uses one primary VLAN for many tenants but isolated access ports can still exchange Layer 2 frames after a misconfiguration. It does not explain the condition tested here.

D:

“Check policy coverage and unintended-match cases before activating filter-based steering” belongs to a separate Ethernet Switching and Spanning Tree issue: a filter-based VLAN security design uses a rule that catches too many packets and steers legitimate devices into quarantine. It does not explain the condition tested here.

Question 1026

A Junos enterprise team investigates this incident: A carrier changes an upstream routing arrangement and a downstream Junos router detects its own AS in the advertised AS path. Which technical explanation most directly identifies the cause or design principle?

  1. iBGP-learned routes are not freely re-advertised to all iBGP neighbors without appropriate reflection or topology.
  2. The default BGP AS-path loop check rejects routes containing the local autonomous system to prevent loops.
  3. BGP route filters must specify permitted exact or range-based prefix matching semantics deliberately.
  4. BGP next-hop resolution must use the appropriate address family; IPv4 routes do not automatically resolve IPv6 next hops.

Explanation

Correct Answer

B:

The default BGP AS-path loop check rejects routes containing the local autonomous system to prevent loops. The appropriate response is to check the advertised AS sequence and correct the peering or routing design instead of bypassing loop checks.

Incorrect Answers

A:

“iBGP-learned routes are not freely re-advertised to all iBGP neighbors without appropriate reflection or topology” belongs to a separate Border Gateway Protocol (BGP) issue: a route-reflector topology loses an iBGP-advertised prefix because clients are not configured under the intended reflector cluster. It does not explain the condition tested here.

C:

“BGP route filters must specify permitted exact or range-based prefix matching semantics deliberately” belongs to a separate Border Gateway Protocol (BGP) issue: an eBGP import policy unexpectedly accepts more-specific prefixes outside the approved customer allocation. It does not explain the condition tested here.

D:

“BGP next-hop resolution must use the appropriate address family; IPv4 routes do not automatically resolve IPv6 next hops” belongs to a separate Border Gateway Protocol (BGP) issue: an IPv6 BGP peer receives a route with an unreachable IPv6 next hop despite an otherwise valid inet6 unicast advertisement. It does not explain the condition tested here.

Question 1027

The team believes it has resolved this Junos issue: A branch link should pace scheduled traffic to a slower uplink yet the team only drops excess packets abruptly. Which observation best verifies the specific intended result?

  1. Observed queue counters show voice packets in the designated forwarding class after classification.
  2. Outgoing traffic conforms to the contracted rate with acceptable delay and fewer burst losses.
  3. Queue depth, latency and drop statistics meet documented objectives during realistic traffic load.
  4. Packet captures show the intended DSCP or 802.1p fields on outbound voice, video and data traffic.

Explanation

Correct Answer

B:

Outgoing traffic conforms to the contracted rate with acceptable delay and fewer burst losses. This checks the relevant result after configure supported egress shaping at the bottleneck and verify throughput and queue behavior.

Incorrect Answers

A:

“Observed queue counters show voice packets in the designated forwarding class after classification” belongs to a separate Class of Service (CoS) issue: voice packets arrive with DSCP EF but are placed into the best-effort queue after a new access interface template is applied. It does not explain the condition tested here.

C:

“Queue depth, latency and drop statistics meet documented objectives during realistic traffic load” belongs to a separate Class of Service (CoS) issue: a backup traffic queue consumes too much buffer and latency-sensitive applications starve during peak bursts. It does not explain the condition tested here.

D:

“Packet captures show the intended DSCP or 802.1p fields on outbound voice, video and data traffic” belongs to a separate Class of Service (CoS) issue: a boundary router classifies EF voice traffic correctly but sends outbound DSCP zero, so downstream devices undo priority handling. It does not explain the condition tested here.

Question 1028

A Junos enterprise team investigates this incident: A powered endpoint detects a Junos switch but fails to negotiate voice prioritization because only ordinary LLDP is enabled. Which technical explanation most directly identifies the cause or design principle?

  1. PoE priority is a tool for allocating scarce power among endpoints when the chassis budget is constrained.
  2. Physical PoE delivery and negotiated device power requirements must match switch and endpoint capabilities.
  3. Base LLDP discovery and LLDP-MED telephony advertisement are distinct capabilities and may require separate enablement.
  4. PoE availability depends on the supported per-port power class and total switch power budget, not just Ethernet link status.

Explanation

Correct Answer

C:

Base LLDP discovery and LLDP-MED telephony advertisement are distinct capabilities and may require separate enablement. The appropriate response is to review LLDP and LLDP-MED operational status and enable supported MED policy for phone access.

Incorrect Answers

A:

“PoE priority is a tool for allocating scarce power among endpoints when the chassis budget is constrained” belongs to a separate IP Telephony Features issue: a switch assigns equal PoE power priority to every port and disconnects an emergency phone before low-priority signage during a power shortage. It does not explain the condition tested here.

B:

“Physical PoE delivery and negotiated device power requirements must match switch and endpoint capabilities” belongs to a separate IP Telephony Features issue: a phone's LLDP-negotiated power demand exceeds its access port's allocated PoE limit and it repeatedly restarts. It does not explain the condition tested here.

D:

“PoE availability depends on the supported per-port power class and total switch power budget, not just Ethernet link status” belongs to a separate IP Telephony Features issue: a high-power phone intermittently reboots whenever all powered endpoints on a switch chassis start simultaneously. It does not explain the condition tested here.

Question 1029

Which suggested shortcut would be especially unsafe for this exact situation? An IPv6 BGP peer receives a route with an unreachable IPv6 next hop despite an otherwise valid inet6 unicast advertisement.

  1. Include show route hidden and policy term hit checks in BGP troubleshooting playbooks.
  2. Validate all required BGP address families during dual-stack peer commissioning.
  3. Point to a successful IPv4 traceroute as sufficient proof an IPv6 BGP next hop resolves.
  4. Review policy ordering with negative tests and explicit default actions on every change.

Explanation

Correct Answer

C:

The tempting alternative fails because BGP next-hop resolution must use the appropriate address family; IPv4 routes do not automatically resolve IPv6 next hops. The supported action is to check IPv6 next-hop reachability and inet6.0, then install a permitted IPv6 underlay route or correct next-hop policy.

Incorrect Answers

A:

That prevention measure relates to a remote prefix appears in incoming BGP updates yet never becomes active after a new route policy was applied.; it is not the unsafe shortcut described here.

B:

That prevention measure relates to a campus router's BGP IPv6 session is Established yet peers advertise only inet unicast family routes.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to a route with a permissive policy term is accepted before a later deny term can block it.; it is not the unsafe shortcut described here.

Question 1030

A network change is required for the following specific situation: A shared uplink carries dynamically registered VLANs until one device has MVRP disabled during an upgrade. Which corrective action is most appropriate?

  1. Remove incorrect edge treatment, validate BPDU reception and restore loop-free port roles.
  2. Inspect MVRP state and permitted VLANs on each trunk; enable supported participation on the missing hop.
  3. Map the trusted endpoints to the proper community secondary VLAN and keep other groups segregated.
  4. Create an approved MSTP region and VLAN-to-instance mapping, then verify root and port role behavior.

Explanation

Correct Answer

B:

MVRP distributes VLAN registration information across participating links; a gap can stop propagation. Verify this by checking that the VLAN registration propagates to the intended downstream trunk and reaches its member ports.

Incorrect Answers

A:

“Remove incorrect edge treatment, validate BPDU reception and restore loop-free port roles” belongs to a separate Ethernet Switching and Spanning Tree issue: a redundant L2 topology creates a broadcast storm after an edge port connected to another switch is treated as an endpoint. It does not explain the condition tested here.

C:

“Map the trusted endpoints to the proper community secondary VLAN and keep other groups segregated” belongs to a separate Ethernet Switching and Spanning Tree issue: a switch rollout splits a team that should communicate within one PVLAN community, while protecting it from another community. It does not explain the condition tested here.

D:

“Create an approved MSTP region and VLAN-to-instance mapping, then verify root and port role behavior” belongs to a separate Ethernet Switching and Spanning Tree issue: a network uses one VLAN-wide topology but wants two forwarding trees for different groups without an instance for every VLAN. It does not explain the condition tested here.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.