Juniper JN0-650 Exam Dumps, Practice Test Questions

100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Juniper JN0-650  Premium File
$54.99
$49.99

JN0-650 Premium File

  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

JN0-650 Premium File

Juniper JN0-650  Premium File
  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$54.99
$49.99

Juniper JN0-650 Practice Test 112

Question 1110

A Junos enterprise team investigates this incident: A new L3 VLAN permits unicast connectivity but the PIM Hello adjacency remains absent on the active path. Which technical explanation most directly identifies the cause or design principle?

  1. PIM routing adjacencies require appropriate protocol participation on the actual routed interfaces used for the distribution tree.
  2. Multicast administrative scoping must restrict eligible groups and outgoing boundaries; group addresses alone do not impose all policy.
  3. ASM and SSM use different membership and source-selection semantics; an SSM receiver must identify its desired sender.
  4. Source-specific multicast uses (S,G) membership semantics and generally avoids ASM rendezvous-point discovery for that flow.

Explanation

Correct Answer

A:

PIM routing adjacencies require appropriate protocol participation on the actual routed interfaces used for the distribution tree. The appropriate response is to enable PIM on the approved routed VLAN interface and inspect neighbor and join state.

Incorrect Answers

B:

“Multicast administrative scoping must restrict eligible groups and outgoing boundaries; group addresses alone do not impose all policy” belongs to a separate IP Multicast issue: a financial multicast feed intended for one campus crosses the WAN because no boundary controls are configured. It does not explain the condition tested here.

C:

“ASM and SSM use different membership and source-selection semantics; an SSM receiver must identify its desired sender” belongs to a separate IP Multicast issue: a streaming application expects a source-specific group to accept traffic from any origin, contrary to its (S,G) subscription. It does not explain the condition tested here.

D:

“Source-specific multicast uses (S,G) membership semantics and generally avoids ASM rendezvous-point discovery for that flow” belongs to a separate IP Multicast issue: a video source is known and receivers support IGMPv3, but engineers configure ASM and an RP unnecessarily for the source-specific application. It does not explain the condition tested here.

Question 1111

The team believes it has resolved this Junos issue: A campus migration removes a VLAN at the source while a trunk continues advertising it unexpectedly. Which observation best verifies the specific intended result?

  1. Only the intended endpoint class is moved while nonmatching hosts retain correct access.
  2. The retired VLAN disappears from unintended trunks and valid registered VLANs remain reachable.
  3. Root and forwarding roles match the approved topology under normal and failover conditions.
  4. The redundant topology converges without sustained broadcast loops during link-failure testing.

Explanation

Correct Answer

B:

The retired VLAN disappears from unintended trunks and valid registered VLANs remain reachable. This checks the relevant result after inspect registration state and remove stale VLAN membership while preserving necessary registrations.

Incorrect Answers

A:

“Only the intended endpoint class is moved while nonmatching hosts retain correct access” belongs to a separate Ethernet Switching and Spanning Tree issue: an ingress classification filter for one terminal type inadvertently redirects other hosts using the same uplink. It does not explain the condition tested here.

C:

“Root and forwarding roles match the approved topology under normal and failover conditions” belongs to a separate Ethernet Switching and Spanning Tree issue: a switch with an unexpectedly low bridge priority becomes MSTP root and redirects aggregation traffic through an access closet. It does not explain the condition tested here.

D:

“The redundant topology converges without sustained broadcast loops during link-failure testing” belongs to a separate Ethernet Switching and Spanning Tree issue: a campus mistakenly enables edge behavior on a switch-to-switch trunk and a loop appears when a backup link activates. It does not explain the condition tested here.

Question 1112

A Junos enterprise team investigates this incident: A visitor portal redirects browser traffic but never releases the user to the approved network after authentication. Which technical explanation most directly identifies the cause or design principle?

  1. Supplicant absence is a distinct failure from an invalid credential or unreachable authentication server.
  2. Guest, server-reject and server-fail outcomes represent different causes and require distinct supported policies.
  3. MAC authorization should couple weak identity to constrained role-based network access, not just a successful RADIUS decision.
  4. Captive portal requires a supported browser interception and authentication-to-authorization sequence.

Explanation

Correct Answer

D:

Captive portal requires a supported browser interception and authentication-to-authorization sequence. The appropriate response is to inspect switch captive portal attachment, redirect reachability and completion flow for a test guest.

Incorrect Answers

A:

“Supplicant absence is a distinct failure from an invalid credential or unreachable authentication server” belongs to a separate Layer 2 Authentication and Access Control issue: a RADIUS server reports no Access-Request for a silent legacy terminal, while switch timers show no EAP response. It does not explain the condition tested here.

B:

“Guest, server-reject and server-fail outcomes represent different causes and require distinct supported policies” belongs to a separate Layer 2 Authentication and Access Control issue: a switch assigns a misconfigured laptop with incorrect EAP credentials to a VLAN intended only for devices that never attempt 802.1X. It does not explain the condition tested here.

C:

“MAC authorization should couple weak identity to constrained role-based network access, not just a successful RADIUS decision” belongs to a separate Layer 2 Authentication and Access Control issue: a legacy printer can join after MAC authentication yet is allowed to reach sensitive management segments. It does not explain the condition tested here.

Question 1113

A Junos enterprise team investigates this incident: A customer access switch trusts external CoS bits and redistributes high-priority markings to all guest traffic. Which technical explanation most directly identifies the cause or design principle?

  1. Packet loss priority differentiates drop susceptibility within a forwarding class and works with the configured queue/drop behavior.
  2. A policer enforces traffic rate or burst limits and can discard or mark out-of-profile input; shaping buffers traffic for paced egress.
  3. Forwarding classes select output queues; an incorrect class-to-queue association can cause head-of-line delays.
  4. CoS rewrite must reflect trusted classifications and intended forwarding policy, not arbitrary source markings.

Explanation

Correct Answer

D:

CoS rewrite must reflect trusted classifications and intended forwarding policy, not arbitrary source markings. The appropriate response is to define a controlled rewrite map for each class and verify high-priority markings remain restricted.

Incorrect Answers

A:

“Packet loss priority differentiates drop susceptibility within a forwarding class and works with the configured queue/drop behavior” belongs to a separate Class of Service (CoS) issue: packets with two different drop precedence values are treated as equally discardable during congestion. It does not explain the condition tested here.

B:

“A policer enforces traffic rate or burst limits and can discard or mark out-of-profile input; shaping buffers traffic for paced egress” belongs to a separate Class of Service (CoS) issue: a guest network should be rate-limited at ingress, but engineers configure only an egress shaper on the uplink. It does not explain the condition tested here.

C:

“Forwarding classes select output queues; an incorrect class-to-queue association can cause head-of-line delays” belongs to a separate Class of Service (CoS) issue: a forwarding-class configuration sends critical routing packets to a queue used for bulk backups and adjacency stability degrades under load. It does not explain the condition tested here.

Question 1114

A Junos enterprise team investigates this incident: A shared multiaccess segment elects an undesired OSPF DR after new routers are connected, and control-plane load rises. Which technical explanation most directly identifies the cause or design principle?

  1. DR/BDR elections on OSPF broadcast networks affect LSA exchange and can be influenced by priority.
  2. Protocol route advertisement and active-route selection are separate; lower route preference can select a non-OSPF candidate.
  3. IPv4 packet reachability does not independently validate OSPFv3's IPv6 link-local neighbor exchanges.
  4. OSPFv3 adjacency depends on participating interfaces and valid IPv6 link-local neighbor communication.

Explanation

Correct Answer

A:

DR/BDR elections on OSPF broadcast networks affect LSA exchange and can be influenced by priority. The appropriate response is to inspect network type, interface priority and existing election state, then plan a controlled DR/BDR change.

Incorrect Answers

B:

“Protocol route advertisement and active-route selection are separate; lower route preference can select a non-OSPF candidate” belongs to a separate Interior Gateway Protocols (IGPs) issue: a team wrongly concludes OSPFv3 failed when inet6.0 shows a static route active and the OSPFv3 candidate inactive. It does not explain the condition tested here.

C:

“IPv4 packet reachability does not independently validate OSPFv3's IPv6 link-local neighbor exchanges” belongs to a separate Interior Gateway Protocols (IGPs) issue: an OSPFv3 adjacency on a dual-stack campus changes state because engineers treat IPv4 interface reachability as proof of IPv6 control-plane health. It does not explain the condition tested here.

D:

“OSPFv3 adjacency depends on participating interfaces and valid IPv6 link-local neighbor communication” belongs to a separate Interior Gateway Protocols (IGPs) issue: an IPv6-only branch has OSPFv3 Hellos on the wrong logical unit after interface renumbering, so no IPv6 routes appear. It does not explain the condition tested here.

Question 1115

Which suggested shortcut would be especially unsafe for this exact situation? A legacy interop design needs separate per-VLAN spanning-tree compatibility but all VLANs inherit one unsuitable tree.

  1. Maintain representative match and nonmatch tests for filter-based VLAN policies.
  2. Assume setting one global RSTP root automatically produces independently chosen roots for every VSTP VLAN.
  3. Test gateway and approved shared-service access alongside lateral isolation in PVLAN reviews.
  4. Include MVRP adjacency and registration checks in trunk-change reviews.

Explanation

Correct Answer

B:

The tempting alternative fails because VSTP provides per-VLAN spanning-tree behavior for compatibility and path control when the design and platform support it. The supported action is to inspect VSTP VLAN membership, root priority and port roles, then repair the intended per-VLAN root arrangement.

Incorrect Answers

A:

That prevention measure relates to a campus onboarding policy puts cameras on the normal data VLAN even though a targeted filter-based VLAN should steer them.; it is not the unsafe shortcut described here.

C:

That prevention measure relates to a building's private VLAN design inadvertently limits tenant access to a shared printer uplink while direct tenant communication is supposed to stay blocked.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to a shared uplink carries dynamically registered VLANs until one device has MVRP disabled during an upgrade.; it is not the unsafe shortcut described here.

Question 1116

Select THREE complementary corrective, verification, or preventive controls for this scenario: A campus access interface keeps a compliant supplicant blocked while EAP requests never reach the expected authentication backend.

  1. Give MAC-authenticated devices the same unrestricted access as strongly authenticated employees.
  2. A known-good supplicant completes EAP/RADIUS authentication and the port reaches its intended authorized state.
  3. Monitor RADIUS reachability and validate each switch's authentication server profile during onboarding.
  4. Grant unbounded port access to all endpoints instead of diagnosing the RADIUS/EAP path.
  5. Inspect switch authenticator state and RADIUS reachability and identity settings, then repair the approved server configuration.
  6. Treat rejected credentials and no-supplicant detection as the same unconditional guest-access event.

Explanation

Correct Answers

B:

Confirmation: Inspect switch authenticator state and RADIUS reachability and identity settings, then repair the approved server configuration.

C:

Prevention of recurrence: 802.1X authorization depends on the authenticator, supplicant and authentication-server conversation being correctly connected.

E:

Correction: 802.1X authorization depends on the authenticator, supplicant and authentication-server conversation being correctly connected.

Incorrect Answers

A:

“Give MAC-authenticated devices the same unrestricted access as strongly authenticated employees” is an unsafe response to a different problem: a legacy printer can join after MAC authentication yet is allowed to reach sensitive management segments. It is not a valid fix here.

D:

“Grant unbounded port access to all endpoints instead of diagnosing the RADIUS/EAP path” does not address 802.1X authorization depends on the authenticator, supplicant and authentication-server conversation being correctly connected.

F:

“Treat rejected credentials and no-supplicant detection as the same unconditional guest-access event” is an unsafe response to a different problem: a switch assigns a misconfigured laptop with incorrect EAP credentials to a VLAN intended only for devices that never attempt 802.1X. It is not a valid fix here.

Question 1117

Which suggested shortcut would be especially unsafe for this exact situation? A full-mesh iBGP design is converted to route reflection but one peer is treated as an ordinary nonclient and route propagation fails.

  1. Review next-hop propagation and IGP coverage whenever an eBGP route enters iBGP.
  2. Disable all iBGP loop protection and expect the route-reflector hierarchy to be unnecessary.
  3. Test expected best-path behavior before modifying LOCAL_PREF across internal peers.
  4. Distinguish internal exit selection from inbound inter-AS path influence in routing design reviews.

Explanation

Correct Answer

B:

The tempting alternative fails because iBGP-learned routes are not freely re-advertised to all iBGP neighbors without appropriate reflection or topology. The supported action is to inspect reflector/client relationships and cluster behavior, then correct the intended route-reflector configuration.

Incorrect Answers

A:

That prevention measure relates to a route-reflector client receives an external destination but lacks the underlay path to the advertised next hop.; it is not the unsafe shortcut described here.

C:

That prevention measure relates to two iBGP exits offer equal reachable routes but the one with higher LOCAL_PREF is not the egress an operator expected.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to an operator tries to make a remote AS prefer one inbound path using LOCAL_PREF that the remote eBGP peer never receives.; it is not the unsafe shortcut described here.

Question 1118

Which suggested shortcut would be especially unsafe for this exact situation? A vendor handset discovers its neighbor using basic LLDP but does not learn the configured network policy for voice tagging.

  1. Test both tagged phone frames and untagged PC frames during phone-port commissioning.
  2. Assume generic LLDP chassis identification alone announces the correct voice VLAN and QoS settings.
  3. Include end-to-end marking tests when deploying voice VLANs and new phone models.
  4. Keep a prioritized PoE inventory and test behavior after PSU or stack changes.

Explanation

Correct Answer

B:

The tempting alternative fails because LLDP-MED extends device discovery with telephony-related network-policy TLVs that need compatible endpoint behavior. The supported action is to enable supported LLDP-MED network policy on the phone-facing port and verify advertisements and phone settings.

Incorrect Answers

A:

That prevention measure relates to a phone-with-PC desk deployment lets the PC reach data services while the tagged voice stream is dropped by VLAN membership.; it is not the unsafe shortcut described here.

C:

That prevention measure relates to a handset follows LLDP-MED voice VLAN advertisement but sends SIP media with the wrong priority marking for the campus QoS design.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to a switch assigns equal PoE power priority to every port and disconnects an emergency phone before low-priority signage during a power shortage.; it is not the unsafe shortcut described here.

Question 1119

A network change is required for the following specific situation: A campus has configured forwarding classes and schedulers but one uplink carries all traffic through default service because association is missing. Which corrective action is most appropriate?

  1. Measure burst patterns and adjust the policer burst configuration within the authorized service contract.
  2. Apply a correctly scoped ingress policer with tested rate and burst values on the relevant flow.
  3. Apply an approved behavior-aggregate classifier with the intended DSCP-to-class mapping on the real ingress interface.
  4. Associate the approved scheduler map with the correct egress interface and confirm class queue counters.

Explanation

Correct Answer

D:

Egress scheduling requires the intended schedulers and their mapping to be applied on the outgoing interface. Verify this by checking that voice traffic receives the required scheduled service at the congested egress without starving other classes.

Incorrect Answers

A:

“Measure burst patterns and adjust the policer burst configuration within the authorized service contract” belongs to a separate Class of Service (CoS) issue: an uplink meets long-term bandwidth policy but legitimate short bursts exceed the token-bucket allowance. It does not explain the condition tested here.

B:

“Apply a correctly scoped ingress policer with tested rate and burst values on the relevant flow” belongs to a separate Class of Service (CoS) issue: a branch wants to enforce a traffic contract on an incoming service flow yet applies policing to an unrelated egress path. It does not explain the condition tested here.

C:

“Apply an approved behavior-aggregate classifier with the intended DSCP-to-class mapping on the real ingress interface” belongs to a separate Class of Service (CoS) issue: voice packets arrive with DSCP EF but are placed into the best-effort queue after a new access interface template is applied. It does not explain the condition tested here.

Question 1120

A Junos enterprise team investigates this incident: A high-power phone intermittently reboots whenever all powered endpoints on a switch chassis start simultaneously. Which technical explanation most directly identifies the cause or design principle?

  1. LLDP-MED location metadata can support telephony location services and must match actual switch-port placement.
  2. PoE availability depends on the supported per-port power class and total switch power budget, not just Ethernet link status.
  3. Voice VLAN placement and CoS marking are related but separate; correct VLAN tagging does not guarantee priority handling.
  4. Voice/data split depends on compatible VLAN membership, accepted 802.1Q tagging and endpoint network policy.

Explanation

Correct Answer

B:

PoE availability depends on the supported per-port power class and total switch power budget, not just Ethernet link status. The appropriate response is to check switch PoE budget, negotiated device requirements and per-port allocation, then rebalance or provision supported power.

Incorrect Answers

A:

“LLDP-MED location metadata can support telephony location services and must match actual switch-port placement” belongs to a separate IP Telephony Features issue: a campus changes a telephone port but LLDP-MED location data remains mapped to an old floor. It does not explain the condition tested here.

C:

“Voice VLAN placement and CoS marking are related but separate; correct VLAN tagging does not guarantee priority handling” belongs to a separate IP Telephony Features issue: a handset follows LLDP-MED voice VLAN advertisement but sends SIP media with the wrong priority marking for the campus QoS design. It does not explain the condition tested here.

D:

“Voice/data split depends on compatible VLAN membership, accepted 802.1Q tagging and endpoint network policy” belongs to a separate IP Telephony Features issue: a phone-with-PC desk deployment lets the PC reach data services while the tagged voice stream is dropped by VLAN membership. It does not explain the condition tested here.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.