Juniper JN0-650 Exam Dumps, Practice Test Questions

100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Juniper JN0-650  Premium File
$54.99
$49.99

JN0-650 Premium File

  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

JN0-650 Premium File

Juniper JN0-650  Premium File
  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$54.99
$49.99

Juniper JN0-650 Practice Test 113

Question 1120

A Junos enterprise team investigates this incident: A high-power phone intermittently reboots whenever all powered endpoints on a switch chassis start simultaneously. Which technical explanation most directly identifies the cause or design principle?

  1. LLDP-MED location metadata can support telephony location services and must match actual switch-port placement.
  2. PoE availability depends on the supported per-port power class and total switch power budget, not just Ethernet link status.
  3. Voice VLAN placement and CoS marking are related but separate; correct VLAN tagging does not guarantee priority handling.
  4. Voice/data split depends on compatible VLAN membership, accepted 802.1Q tagging and endpoint network policy.

Explanation

Correct Answer

B:

PoE availability depends on the supported per-port power class and total switch power budget, not just Ethernet link status. The appropriate response is to check switch PoE budget, negotiated device requirements and per-port allocation, then rebalance or provision supported power.

Incorrect Answers

A:

“LLDP-MED location metadata can support telephony location services and must match actual switch-port placement” belongs to a separate IP Telephony Features issue: a campus changes a telephone port but LLDP-MED location data remains mapped to an old floor. It does not explain the condition tested here.

C:

“Voice VLAN placement and CoS marking are related but separate; correct VLAN tagging does not guarantee priority handling” belongs to a separate IP Telephony Features issue: a handset follows LLDP-MED voice VLAN advertisement but sends SIP media with the wrong priority marking for the campus QoS design. It does not explain the condition tested here.

D:

“Voice/data split depends on compatible VLAN membership, accepted 802.1Q tagging and endpoint network policy” belongs to a separate IP Telephony Features issue: a phone-with-PC desk deployment lets the PC reach data services while the tagged voice stream is dropped by VLAN membership. It does not explain the condition tested here.

Question 1121

The team believes it has resolved this Junos issue: A security function needs to classify a subset of traffic by source and destination criteria rather than trusted external markings. Which observation best verifies the specific intended result?

  1. Voice traffic receives the required scheduled service at the congested egress without starving other classes.
  2. Controlled traffic probes pass valid bursts without permitting sustained rate violations.
  3. Measured guest ingress usage remains within policy and permitted business traffic is unaffected.
  4. Only traffic meeting the defined match receives the intended queue and packet loss priority.

Explanation

Correct Answer

D:

Only traffic meeting the defined match receives the intended queue and packet loss priority. This checks the relevant result after use a permitted firewall or multifield classifier matching the approved traffic fields and assign its forwarding class.

Incorrect Answers

A:

“Voice traffic receives the required scheduled service at the congested egress without starving other classes” belongs to a separate Class of Service (CoS) issue: a campus has configured forwarding classes and schedulers but one uplink carries all traffic through default service because association is missing. It does not explain the condition tested here.

B:

“Controlled traffic probes pass valid bursts without permitting sustained rate violations” belongs to a separate Class of Service (CoS) issue: an uplink meets long-term bandwidth policy but legitimate short bursts exceed the token-bucket allowance. It does not explain the condition tested here.

C:

“Measured guest ingress usage remains within policy and permitted business traffic is unaffected” belongs to a separate Class of Service (CoS) issue: a guest network should be rate-limited at ingress, but engineers configure only an egress shaper on the uplink. It does not explain the condition tested here.

Question 1122

For this case, select TWO complementary measures or outcome checks that directly resolve the problem: An IPv6-only branch has OSPFv3 Hellos on the wrong logical unit after interface renumbering, so no IPv6 routes appear.

  1. Configure IPv4 OSPFv2 alone and expect it to populate IPv6 unicast routes automatically.
  2. Add a catch-all accept at the end of the policy to bypass the source-type error.
  3. An OSPFv3 neighbor forms and approved IPv6 prefixes appear in inet6.0.
  4. Move OSPFv3 participation to the correct active interface and verify neighbor and IPv6 RIB state.
  5. Change the remote area's physical cabling before checking local route filtering.

Explanation

Correct Answers

C:

An OSPFv3 neighbor forms and approved IPv6 prefixes appear in inet6.0. The specific steps required are to move OSPFv3 participation to the correct active interface and verify neighbor and IPv6 RIB state.

D:

Move OSPFv3 participation to the correct active interface and verify neighbor and IPv6 RIB state. This addresses the dependency that OSPFv3 adjacency depends on participating interfaces and valid IPv6 link-local neighbor communication.

Incorrect Answers

A:

“Configure IPv4 OSPFv2 alone and expect it to populate IPv6 unicast routes automatically” does not address OSPFv3 adjacency depends on participating interfaces and valid IPv6 link-local neighbor communication.

B:

“Add a catch-all accept at the end of the policy to bypass the source-type error” is an unsafe response to a different problem: an OSPF export term filters routes based on the wrong protocol, so an intended static default is not originated. It is not a valid fix here.

E:

“Change the remote area's physical cabling before checking local route filtering” is an unsafe response to a different problem: an OSPF import policy hides external routes on one device while neighbors retain them, confusing the team reviewing reachability. It is not a valid fix here.

Question 1123

A Junos enterprise team investigates this incident: A lab uses one primary VLAN for many tenants but isolated access ports can still exchange Layer 2 frames after a misconfiguration. Which technical explanation most directly identifies the cause or design principle?

  1. Private VLAN isolated ports are designed to limit lateral L2 communication while still reaching the permitted promiscuous uplink.
  2. VSTP provides per-VLAN spanning-tree behavior for compatibility and path control when the design and platform support it.
  3. Layer 2 protocol tunneling preserves selected customer control traffic across a service where ordinary data tagging is not enough.
  4. MSTP maps VLANs into a smaller set of spanning-tree instances, providing scalable per-group path control.

Explanation

Correct Answer

A:

Private VLAN isolated ports are designed to limit lateral L2 communication while still reaching the permitted promiscuous uplink. The appropriate response is to inspect primary and secondary private VLAN roles and port membership; restore approved isolated/community mappings.

Incorrect Answers

B:

“VSTP provides per-VLAN spanning-tree behavior for compatibility and path control when the design and platform support it” belongs to a separate Ethernet Switching and Spanning Tree issue: a legacy interop design needs separate per-VLAN spanning-tree compatibility but all VLANs inherit one unsuitable tree. It does not explain the condition tested here.

C:

“Layer 2 protocol tunneling preserves selected customer control traffic across a service where ordinary data tagging is not enough” belongs to a separate Ethernet Switching and Spanning Tree issue: an 802.1Q trunk carries customer data through a provider Ethernet segment but fails to forward the required spanning-tree control frames transparently. It does not explain the condition tested here.

D:

“MSTP maps VLANs into a smaller set of spanning-tree instances, providing scalable per-group path control” belongs to a separate Ethernet Switching and Spanning Tree issue: a large campus places hundreds of VLANs in separate spanning-tree instances and reaches scale or CPU limits. It does not explain the condition tested here.

Question 1124

To prevent recurrence of this precise networking failure, which practice should be adopted? Two OSPF routers on a shared transit segment report different Hello and dead intervals and never establish adjacency.

  1. Keep timer settings in shared configuration templates and validate both directions before rollout.
  2. Keep IPv4 and IPv6 routing verification separate for dual-stack maintenance.
  3. Test one allowed and one forbidden route against each export policy term before deployment.
  4. Document expected external metrics and run primary/backup failover tests during policy changes.

Explanation

Correct Answer

A:

Keep timer settings in shared configuration templates and validate both directions before rollout. This guards against OSPF neighbors require compatible Hello and dead interval settings on the shared interface.

Incorrect Answers

B:

“Keep IPv4 and IPv6 routing verification separate for dual-stack maintenance” belongs to a separate Interior Gateway Protocols (IGPs) issue: an IPv6 branch outage is misdiagnosed using only IPv4 pings, despite OSPFv3 neighbors using IPv6 link-local messaging. It does not explain the condition tested here.

C:

“Test one allowed and one forbidden route against each export policy term before deployment” belongs to a separate Interior Gateway Protocols (IGPs) issue: a branch default-route injection stops after a policy matches OSPF-learned routes instead of the intended local static. It does not explain the condition tested here.

D:

“Document expected external metrics and run primary/backup failover tests during policy changes” belongs to a separate Interior Gateway Protocols (IGPs) issue: a branch receives two external paths with different metric-type assumptions after a policy change and prefers the wrong exit. It does not explain the condition tested here.

Question 1125

To prevent recurrence of this precise networking failure, which practice should be adopted? A campus OSPF interface is accidentally placed in area 0 while its neighbor advertises a nonbackbone area, preventing a Full adjacency.

  1. Validate active logical-interface mappings and IPv6 adjacency as part of change acceptance.
  2. Validate per-interface OSPF area assignments from an approved topology matrix before commit.
  3. Document expected external metrics and run primary/backup failover tests during policy changes.
  4. Record both LSDB presence and local RIB installation in OSPF troubleshooting runbooks.

Explanation

Correct Answer

B:

Validate per-interface OSPF area assignments from an approved topology matrix before commit. This guards against OSPF neighbors must agree on the area context to form adjacency on the common link.

Incorrect Answers

A:

“Validate active logical-interface mappings and IPv6 adjacency as part of change acceptance” belongs to a separate Interior Gateway Protocols (IGPs) issue: an IPv6-only branch has OSPFv3 Hellos on the wrong logical unit after interface renumbering, so no IPv6 routes appear. It does not explain the condition tested here.

C:

“Document expected external metrics and run primary/backup failover tests during policy changes” belongs to a separate Interior Gateway Protocols (IGPs) issue: an OSPF policy update redistributes a route without an appropriate external metric, shifting traffic to a slow backup. It does not explain the condition tested here.

D:

“Record both LSDB presence and local RIB installation in OSPF troubleshooting runbooks” belongs to a separate Interior Gateway Protocols (IGPs) issue: an OSPF import policy hides external routes on one device while neighbors retain them, confusing the team reviewing reachability. It does not explain the condition tested here.

Question 1126

Which suggested shortcut would be especially unsafe for this exact situation? A business wants out-of-profile marked traffic to drop earlier than in-profile traffic within one forwarding class.

  1. Map every packet to the lowest loss priority regardless of its out-of-profile status.
  2. Establish congestion thresholds and monitor starvation as part of queue-priority design.
  3. Keep queue drop-profile acceptance tests and monitor production congestion before broad rollout.
  4. Audit DSCP preservation and remarking at untrusted edge boundaries.

Explanation

Correct Answer

A:

The tempting alternative fails because packet loss priority differentiates drop susceptibility within a forwarding class and works with the configured queue/drop behavior. The supported action is to map the two packet categories to the intended PLP levels and verify drop-profile response.

Incorrect Answers

B:

That prevention measure relates to two queues use the same scheduler priority, but the business expects one to always win during contention.; it is not the unsafe shortcut described here.

C:

That prevention measure relates to a RED drop profile is applied too aggressively and drops packets even under moderate load.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to a branch egress rewriter incorrectly gives bulk backups the same DSCP as real-time voice.; it is not the unsafe shortcut described here.

Question 1127

Select THREE complementary corrective, verification, or preventive controls for this scenario: A distribution node learns connected subnets but never sends Hello packets on its OSPF transit port due to passive-interface policy.

  1. Remove passive behavior only from the approved router-to-router transit link and check Hello and neighbor states.
  2. Reset OSPFv3 adjacency repeatedly although the route exists as a nonactive candidate.
  3. Hellos are observed in the routing adjacency and a Full neighbor appears on the intended port.
  4. Classify loopbacks and user-facing links separately from peer links when applying passive templates.
  5. Make every edge interface active to OSPF regardless of whether a routing peer exists.
  6. Configure IPv4 OSPFv2 alone and expect it to populate IPv6 unicast routes automatically.

Explanation

Correct Answers

A:

Correction: Making a link passive suppresses OSPF adjacency formation even when its prefix remains eligible for advertisement.

C:

Confirmation: Remove passive behavior only from the approved router-to-router transit link and check Hello and neighbor states.

D:

Prevention of recurrence: Making a link passive suppresses OSPF adjacency formation even when its prefix remains eligible for advertisement.

Incorrect Answers

B:

“Reset OSPFv3 adjacency repeatedly although the route exists as a nonactive candidate” is an unsafe response to a different problem: a team wrongly concludes OSPFv3 failed when inet6.0 shows a static route active and the OSPFv3 candidate inactive. It is not a valid fix here.

E:

“Make every edge interface active to OSPF regardless of whether a routing peer exists” does not address making a link passive suppresses OSPF adjacency formation even when its prefix remains eligible for advertisement.

F:

“Configure IPv4 OSPFv2 alone and expect it to populate IPv6 unicast routes automatically” is an unsafe response to a different problem: a new IPv6 peering uses OSPFv3 on a retired VLAN unit rather than the active routed transit interface. It is not a valid fix here.

Question 1128

The team believes it has resolved this Junos issue: A MAC RADIUS policy authenticates a known camera but applies the broad employee VLAN instead of a camera-only network. Which observation best verifies the specific intended result?

  1. The known device reaches only permitted destinations and cannot reach employee or management resources.
  2. The scanner authenticates through the approved method without any browser step, while unknown devices stay denied.
  3. During a simulated RADIUS outage, endpoints receive only the approved degraded-connectivity policy.
  4. A known-good supplicant completes EAP/RADIUS authentication and the port reaches its intended authorized state.

Explanation

Correct Answer

A:

The known device reaches only permitted destinations and cannot reach employee or management resources. This checks the relevant result after assign the authenticated device to the authorized restricted network profile and verify effective VLAN/filter.

Incorrect Answers

B:

“The scanner authenticates through the approved method without any browser step, while unknown devices stay denied” belongs to a separate Layer 2 Authentication and Access Control issue: a noninteractive sensor is trapped in captive-portal onboarding because operators selected browser authentication for all endpoints. It does not explain the condition tested here.

C:

“During a simulated RADIUS outage, endpoints receive only the approved degraded-connectivity policy” belongs to a separate Layer 2 Authentication and Access Control issue: after a RADIUS outage, the access switch opens ports broadly instead of applying the approved restricted server-fail VLAN. It does not explain the condition tested here.

D:

“A known-good supplicant completes EAP/RADIUS authentication and the port reaches its intended authorized state” belongs to a separate Layer 2 Authentication and Access Control issue: a corporate laptop presents valid 802.1X credentials but stays unauthorized because the switch is using the wrong RADIUS server profile. It does not explain the condition tested here.

Question 1129

To prevent recurrence of this precise networking failure, which practice should be adopted? An OSPF export term filters routes based on the wrong protocol, so an intended static default is not originated.

  1. Keep timer settings in shared configuration templates and validate both directions before rollout.
  2. Keep IPv4 and IPv6 routing verification separate for dual-stack maintenance.
  3. Test one allowed and one forbidden route against each export policy term before deployment.
  4. Validate active logical-interface mappings and IPv6 adjacency as part of change acceptance.

Explanation

Correct Answer

C:

Test one allowed and one forbidden route against each export policy term before deployment. This guards against routing-policy match criteria must align with the source route type and the intended OSPF export behavior.

Incorrect Answers

A:

“Keep timer settings in shared configuration templates and validate both directions before rollout” belongs to a separate Interior Gateway Protocols (IGPs) issue: two OSPF routers on a shared transit segment report different Hello and dead intervals and never establish adjacency. It does not explain the condition tested here.

B:

“Keep IPv4 and IPv6 routing verification separate for dual-stack maintenance” belongs to a separate Interior Gateway Protocols (IGPs) issue: an OSPFv3 adjacency on a dual-stack campus changes state because engineers treat IPv4 interface reachability as proof of IPv6 control-plane health. It does not explain the condition tested here.

D:

“Validate active logical-interface mappings and IPv6 adjacency as part of change acceptance” belongs to a separate Interior Gateway Protocols (IGPs) issue: a new IPv6 peering uses OSPFv3 on a retired VLAN unit rather than the active routed transit interface. It does not explain the condition tested here.

Question 1130

The team believes it has resolved this Junos issue: A shared uplink carries dynamically registered VLANs until one device has MVRP disabled during an upgrade. Which observation best verifies the specific intended result?

  1. The redundant topology converges without sustained broadcast loops during link-failure testing.
  2. The VLAN registration propagates to the intended downstream trunk and reaches its member ports.
  3. Two isolated tenant ports cannot reach each other but can reach the permitted gateway uplink.
  4. Only the intended endpoint class is moved while nonmatching hosts retain correct access.

Explanation

Correct Answer

B:

The VLAN registration propagates to the intended downstream trunk and reaches its member ports. This checks the relevant result after inspect MVRP state and permitted VLANs on each trunk; enable supported participation on the missing hop.

Incorrect Answers

A:

“The redundant topology converges without sustained broadcast loops during link-failure testing” belongs to a separate Ethernet Switching and Spanning Tree issue: a campus mistakenly enables edge behavior on a switch-to-switch trunk and a loop appears when a backup link activates. It does not explain the condition tested here.

C:

“Two isolated tenant ports cannot reach each other but can reach the permitted gateway uplink” belongs to a separate Ethernet Switching and Spanning Tree issue: a lab uses one primary VLAN for many tenants but isolated access ports can still exchange Layer 2 frames after a misconfiguration. It does not explain the condition tested here.

D:

“Only the intended endpoint class is moved while nonmatching hosts retain correct access” belongs to a separate Ethernet Switching and Spanning Tree issue: a filter-based VLAN security design uses a rule that catches too many packets and steers legitimate devices into quarantine. It does not explain the condition tested here.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.