Juniper JN0-650 Exam Dumps, Practice Test Questions

100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Juniper JN0-650  Premium File
$54.99
$49.99

JN0-650 Premium File

  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

JN0-650 Premium File

Juniper JN0-650  Premium File
  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$54.99
$49.99

Juniper JN0-650 Practice Test 12

Question 110

For this case, select TWO complementary measures or outcome checks that directly resolve the problem: A filter-based VLAN security design uses a rule that catches too many packets and steers legitimate devices into quarantine.

  1. Narrow the match to approved selectors and compare affected packet counters and VLAN assignment.
  2. Use a catch-all quarantine match without analyzing which hosts also traverse the interface.
  3. Make every switch-to-switch uplink an edge port to accelerate convergence.
  4. Only the intended endpoint class is moved while nonmatching hosts retain correct access.
  5. Create an independent VSTP instance for every VLAN without checking platform scaling limits.

Explanation

Correct Answers

A:

Narrow the match to approved selectors and compare affected packet counters and VLAN assignment. This addresses the dependency that overbroad match conditions can cause unauthorized VLAN steering and affect both security and reachability.

D:

Only the intended endpoint class is moved while nonmatching hosts retain correct access. The specific steps required are to narrow the match to approved selectors and compare affected packet counters and VLAN assignment.

Incorrect Answers

B:

“Use a catch-all quarantine match without analyzing which hosts also traverse the interface” does not address overbroad match conditions can cause unauthorized VLAN steering and affect both security and reachability.

C:

“Make every switch-to-switch uplink an edge port to accelerate convergence” is an unsafe response to a different problem: a redundant L2 topology creates a broadcast storm after an edge port connected to another switch is treated as an endpoint. It is not a valid fix here.

E:

“Create an independent VSTP instance for every VLAN without checking platform scaling limits” is an unsafe response to a different problem: a large campus places hundreds of VLANs in separate spanning-tree instances and reaches scale or CPU limits. It is not a valid fix here.

Question 111

Select THREE complementary corrective, verification, or preventive controls for this scenario: A phone's LLDP-negotiated power demand exceeds its access port's allocated PoE limit and it repeatedly restarts.

  1. Assume a green Ethernet link light proves an endpoint has its required operating power.
  2. The device stays powered during peak consumption and Junos reports no power-denial events.
  3. Assume enabling ordinary LLDP globally is guaranteed to activate every LLDP-MED policy automatically.
  4. Validate PD power profiles and test peak draw rather than idle boot alone.
  5. Inspect PoE class, per-port priority and available chassis budget, and move to a supported powered port if needed.
  6. Put the phone and PC on one unrestricted VLAN to avoid checking voice VLAN tagging.

Explanation

Correct Answers

B:

Confirmation: Inspect PoE class, per-port priority and available chassis budget, and move to a supported powered port if needed.

D:

Prevention of recurrence: Physical PoE delivery and negotiated device power requirements must match switch and endpoint capabilities.

E:

Correction: Physical PoE delivery and negotiated device power requirements must match switch and endpoint capabilities.

Incorrect Answers

A:

“Assume a green Ethernet link light proves an endpoint has its required operating power” does not address physical PoE delivery and negotiated device power requirements must match switch and endpoint capabilities.

C:

“Assume enabling ordinary LLDP globally is guaranteed to activate every LLDP-MED policy automatically” is an unsafe response to a different problem: a powered endpoint detects a Junos switch but fails to negotiate voice prioritization because only ordinary LLDP is enabled. It is not a valid fix here.

F:

“Put the phone and PC on one unrestricted VLAN to avoid checking voice VLAN tagging” is an unsafe response to a different problem: a phone-with-PC desk deployment lets the PC reach data services while the tagged voice stream is dropped by VLAN membership. It is not a valid fix here.

Question 112

A network change is required for the following specific situation: A new leaf imports VNI reachability but packets disappear because its VXLAN tunnel endpoint IP is unresolved. Which corrective action is most appropriate?

  1. Align the intended ESI and supported LAG mode, then inspect relevant EVPN Type 1 and Type 4 routes.
  2. Inspect the route type appropriate to the claimed control-plane information instead of treating all EVPN NLRIs equally.
  3. Repair authorized underlay routing to remote VTEPs and check tunnel reachability before changing EVPN policies.
  4. Inspect shared ESI, DF election and Ethernet-segment routes, then correct the multihoming configuration.

Explanation

Correct Answer

C:

VXLAN encapsulates overlay traffic across an IP underlay; VTEP reachability is necessary even with valid BGP EVPN control-plane state. Verify this by checking that the remote VTEP becomes reachable and encapsulated packets cross the fabric as intended.

Incorrect Answers

A:

“Align the intended ESI and supported LAG mode, then inspect relevant EVPN Type 1 and Type 4 routes” belongs to a separate EVPN issue: a shared Ethernet segment loses its fast convergence properties after an ESI-LAG peer receives an inconsistent configuration. It does not explain the condition tested here.

B:

“Inspect the route type appropriate to the claimed control-plane information instead of treating all EVPN NLRIs equally” belongs to a separate EVPN issue: a fabric advertises Type 3 routes and claims this proves specific remote host MACs are reachable. It does not explain the condition tested here.

D:

“Inspect shared ESI, DF election and Ethernet-segment routes, then correct the multihoming configuration” belongs to a separate EVPN issue: a dual-attached Ethernet segment experiences persistent duplicates during link recovery because multihoming election or ESI state differs. It does not explain the condition tested here.

Question 113

A network change is required for the following specific situation: Two OSPF routers on a shared transit segment report different Hello and dead intervals and never establish adjacency. Which corrective action is most appropriate?

  1. Restrict the export policy to explicit approved route prefixes and protocols, then check external LSAs.
  2. Review external metric type and value at the originator, then apply the documented traffic-engineering policy.
  3. Compare OSPF interface timers and align the two peers to approved Hello and dead values.
  4. Inspect the active local default and export term conditions; match only the authorized static default source.

Explanation

Correct Answer

C:

OSPF neighbors require compatible Hello and dead interval settings on the shared interface. Verify this by checking that stable Hellos and Full neighbor state persist through repeated protocol interval checks.

Incorrect Answers

A:

“Restrict the export policy to explicit approved route prefixes and protocols, then check external LSAs” belongs to a separate Interior Gateway Protocols (IGPs) issue: an ABR starts leaking a management static route into the enterprise IGP after a permissive export term was introduced. It does not explain the condition tested here.

B:

“Review external metric type and value at the originator, then apply the documented traffic-engineering policy” belongs to a separate Interior Gateway Protocols (IGPs) issue: an OSPF policy update redistributes a route without an appropriate external metric, shifting traffic to a slow backup. It does not explain the condition tested here.

D:

“Inspect the active local default and export term conditions; match only the authorized static default source” belongs to a separate Interior Gateway Protocols (IGPs) issue: an OSPF export term filters routes based on the wrong protocol, so an intended static default is not originated. It does not explain the condition tested here.

Question 114

A network change is required for the following specific situation: BGP peers exchange IPv4 NLRI correctly but a planned IPv6 customer route never appears in inet6.0. Which corrective action is most appropriate?

  1. Check the advertised AS sequence and correct the peering or routing design instead of bypassing loop checks.
  2. Put specific deny conditions before broad acceptance, and test the policy with representative routes.
  3. Enable the intended inet6 family consistently on eligible BGP peers and verify route policy and inet6.0.
  4. Select a permitted inbound traffic-engineering mechanism with the provider, such as suitable AS-path prepending or agreed communities.

Explanation

Correct Answer

C:

BGP address-family negotiation controls which IPv4 or IPv6 NLRI can be exchanged independently of session state. Verify this by checking that the expected IPv6 prefix is received in inet6.0 while IPv4 route exchange remains unchanged.

Incorrect Answers

A:

“Check the advertised AS sequence and correct the peering or routing design instead of bypassing loop checks” belongs to a separate Border Gateway Protocol (BGP) issue: a carrier changes an upstream routing arrangement and a downstream Junos router detects its own AS in the advertised AS path. It does not explain the condition tested here.

B:

“Put specific deny conditions before broad acceptance, and test the policy with representative routes” belongs to a separate Border Gateway Protocol (BGP) issue: a route with a permissive policy term is accepted before a later deny term can block it. It does not explain the condition tested here.

D:

“Select a permitted inbound traffic-engineering mechanism with the provider, such as suitable AS-path prepending or agreed communities” belongs to a separate Border Gateway Protocol (BGP) issue: an operator tries to make a remote AS prefer one inbound path using LOCAL_PREF that the remote eBGP peer never receives. It does not explain the condition tested here.

Question 115

To prevent recurrence of this precise networking failure, which practice should be adopted? A dual-homed site changes internal LOCAL_PREF but sees no change in the other autonomous system's inbound traffic choice.

  1. Validate every route-reflector client and failover path in topology inventory before conversion.
  2. Distinguish internal exit selection from inbound inter-AS path influence in routing design reviews.
  3. Test path equivalence, forwarding and failure convergence before enabling transit ECMP.
  4. Validate all required BGP address families during dual-stack peer commissioning.

Explanation

Correct Answer

B:

Distinguish internal exit selection from inbound inter-AS path influence in routing design reviews. This guards against LOCAL_PREF is an intra-AS BGP attribute, not a value routinely advertised to external BGP neighbors.

Incorrect Answers

A:

“Validate every route-reflector client and failover path in topology inventory before conversion” belongs to a separate Border Gateway Protocol (BGP) issue: a full-mesh iBGP design is converted to route reflection but one peer is treated as an ordinary nonclient and route propagation fails. It does not explain the condition tested here.

C:

“Test path equivalence, forwarding and failure convergence before enabling transit ECMP” belongs to a separate Border Gateway Protocol (BGP) issue: equal candidate BGP routes are visible but no multipath forwarding entry is installed because eligibility or policy differs. It does not explain the condition tested here.

D:

“Validate all required BGP address families during dual-stack peer commissioning” belongs to a separate Border Gateway Protocol (BGP) issue: BGP peers exchange IPv4 NLRI correctly but a planned IPv6 customer route never appears in inet6.0. It does not explain the condition tested here.

Question 116

The team believes it has resolved this Junos issue: A switch assigns a misconfigured laptop with incorrect EAP credentials to a VLAN intended only for devices that never attempt 802.1X. Which observation best verifies the specific intended result?

  1. The registered device is authorized with limited access; an unknown MAC remains blocked.
  2. Both intended endpoints receive their authorized VLAN/policy without permitting unapproved devices.
  3. The user sees a valid login prompt and receives only the approved post-login policy.
  4. A nonresponding guest gets its intended limited VLAN while invalid credentials never receive guest privilege.

Explanation

Correct Answer

D:

A nonresponding guest gets its intended limited VLAN while invalid credentials never receive guest privilege. This checks the relevant result after check authentication result classification and map the rejected user to an appropriate deny or reject response.

Incorrect Answers

A:

“The registered device is authorized with limited access; an unknown MAC remains blocked” belongs to a separate Layer 2 Authentication and Access Control issue: a non-802.1X network printer is consistently rejected because its access port permits only EAP supplicants. It does not explain the condition tested here.

B:

“Both intended endpoints receive their authorized VLAN/policy without permitting unapproved devices” belongs to a separate Layer 2 Authentication and Access Control issue: an access port is placed in single-supplicant mode but a desk phone and PC must authenticate separately behind the same port. It does not explain the condition tested here.

C:

“The user sees a valid login prompt and receives only the approved post-login policy” belongs to a separate Layer 2 Authentication and Access Control issue: a visitor portal redirects browser traffic but never releases the user to the approved network after authentication. It does not explain the condition tested here.

Question 117

To prevent recurrence of this precise networking failure, which practice should be adopted? A policy-based VLAN filter moves matching device traffic to a quarantine VLAN but a rule fails to match the intended MAC or packet fields.

  1. Maintain representative match and nonmatch tests for filter-based VLAN policies.
  2. Track MSTP instance scale and maintain identical region parameters across participating switches.
  3. Track VLAN lifecycle and MVRP registration ownership as ports are decommissioned.
  4. Keep explicit root priority policy and validate elections after device replacement.

Explanation

Correct Answer

A:

Maintain representative match and nonmatch tests for filter-based VLAN policies. This guards against filter-based VLAN assignment depends on correctly matching the selected traffic and applying the filter at the right ingress point.

Incorrect Answers

B:

“Track MSTP instance scale and maintain identical region parameters across participating switches” belongs to a separate Ethernet Switching and Spanning Tree issue: a large campus places hundreds of VLANs in separate spanning-tree instances and reaches scale or CPU limits. It does not explain the condition tested here.

C:

“Track VLAN lifecycle and MVRP registration ownership as ports are decommissioned” belongs to a separate Ethernet Switching and Spanning Tree issue: a dynamic VLAN is removed from one edge but stale MVRP registration keeps an unused VLAN active downstream. It does not explain the condition tested here.

D:

“Keep explicit root priority policy and validate elections after device replacement” belongs to a separate Ethernet Switching and Spanning Tree issue: a switch with an unexpectedly low bridge priority becomes MSTP root and redirects aggregation traffic through an access closet. It does not explain the condition tested here.

Question 118

Select THREE complementary corrective, verification, or preventive controls for this scenario: An EVPN-VXLAN frame is dropped over a path where the IP underlay MTU was sized only for unencapsulated Ethernet payloads.

  1. Test larger encapsulated frames and align supported underlay and overlay MTUs without disabling unrelated protections.
  2. Include encapsulation headroom and path MTU tests in EVPN-VXLAN design validation.
  3. Full-sized authorized frames traverse the VXLAN tunnel without unexpected fragmentation or blackholing.
  4. Treat a single learned MAC/IP Type 2 route as guaranteed proof of correct BUM participation for every VTEP.
  5. Assume an Ethernet payload that fits a non-VXLAN path always fits once the VXLAN overhead is added.
  6. Read a Type 1 Ethernet auto-discovery update as the definitive source of every individual host MAC address.

Explanation

Correct Answers

A:

Correction: VXLAN adds encapsulation overhead, so underlay MTU must accommodate the intended overlay frame size.

B:

Prevention of recurrence: VXLAN adds encapsulation overhead, so underlay MTU must accommodate the intended overlay frame size.

C:

Confirmation: Test larger encapsulated frames and align supported underlay and overlay MTUs without disabling unrelated protections.

Incorrect Answers

D:

“Treat a single learned MAC/IP Type 2 route as guaranteed proof of correct BUM participation for every VTEP” is an unsafe response to a different problem: a VNI is active on two leafs but unknown-unicast or broadcast replication never reaches the remote side. It is not a valid fix here.

E:

“Assume an Ethernet payload that fits a non-VXLAN path always fits once the VXLAN overhead is added” does not address VXLAN adds encapsulation overhead, so underlay MTU must accommodate the intended overlay frame size.

F:

“Read a Type 1 Ethernet auto-discovery update as the definitive source of every individual host MAC address” is an unsafe response to a different problem: a fabric advertises Type 3 routes and claims this proves specific remote host MACs are reachable. It is not a valid fix here.

Question 119

To prevent recurrence of this precise networking failure, which practice should be adopted? BGP peers exchange IPv4 NLRI correctly but a planned IPv6 customer route never appears in inet6.0.

  1. Validate all required BGP address families during dual-stack peer commissioning.
  2. Include show route hidden and policy term hit checks in BGP troubleshooting playbooks.
  3. Monitor AS-path anomalies and validate inter-AS topology changes before enabling export.
  4. Track every BGP advertise-inactive exception and test cross-protocol route selection.

Explanation

Correct Answer

A:

Validate all required BGP address families during dual-stack peer commissioning. This guards against BGP address-family negotiation controls which IPv4 or IPv6 NLRI can be exchanged independently of session state.

Incorrect Answers

B:

“Include show route hidden and policy term hit checks in BGP troubleshooting playbooks” belongs to a separate Border Gateway Protocol (BGP) issue: a remote prefix appears in incoming BGP updates yet never becomes active after a new route policy was applied. It does not explain the condition tested here.

C:

“Monitor AS-path anomalies and validate inter-AS topology changes before enabling export” belongs to a separate Border Gateway Protocol (BGP) issue: the local AS appears in a received external BGP AS_PATH and the route is rejected despite valid prefix reachability. It does not explain the condition tested here.

D:

“Track every BGP advertise-inactive exception and test cross-protocol route selection” belongs to a separate Border Gateway Protocol (BGP) issue: an engineer adds advertise-inactive and downstream peers begin receiving a BGP route that loses to an OSPF route locally. It does not explain the condition tested here.

Question 120

To prevent recurrence of this precise networking failure, which practice should be adopted? A network replacement changes VSTP root elections, causing backup links to forward for a critical VLAN.

  1. Document primary/secondary VLAN mappings and test permitted peer groups and isolation boundaries.
  2. Keep explicit root priority policy and validate elections after device replacement.
  3. Test gateway and approved shared-service access alongside lateral isolation in PVLAN reviews.
  4. Scope and monitor tunneled L2 control protocols to prevent control-plane abuse.

Explanation

Correct Answer

B:

Keep explicit root priority policy and validate elections after device replacement. This guards against spanning-tree root choice and path costs govern forwarding paths; unplanned priority changes can alter traffic patterns.

Incorrect Answers

A:

“Document primary/secondary VLAN mappings and test permitted peer groups and isolation boundaries” belongs to a separate Ethernet Switching and Spanning Tree issue: a switch rollout splits a team that should communicate within one PVLAN community, while protecting it from another community. It does not explain the condition tested here.

C:

“Test gateway and approved shared-service access alongside lateral isolation in PVLAN reviews” belongs to a separate Ethernet Switching and Spanning Tree issue: a building's private VLAN design inadvertently limits tenant access to a shared printer uplink while direct tenant communication is supposed to stay blocked. It does not explain the condition tested here.

D:

“Scope and monitor tunneled L2 control protocols to prevent control-plane abuse” belongs to a separate Ethernet Switching and Spanning Tree issue: an 802.1Q trunk carries customer data through a provider Ethernet segment but fails to forward the required spanning-tree control frames transparently. It does not explain the condition tested here.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.