Juniper JN0-650 Exam Dumps, Practice Test Questions

100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Juniper JN0-650  Premium File
$54.99
$49.99

JN0-650 Premium File

  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

JN0-650 Premium File

Juniper JN0-650  Premium File
  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$54.99
$49.99

Juniper JN0-650 Practice Test 10

Question 90

The team believes it has resolved this Junos issue: A redundant network changes the preferred route to the source while packets keep arriving on the other physical link. Which observation best verifies the specific intended result?

  1. RPF counters and expected (S,G) forwarding stabilize after the route change.
  2. Backbone utilization reflects one upstream multicast copy per tree branch while interested receivers obtain the stream.
  3. Only the specified source delivers data to receivers of the chosen SSM group.
  4. The required PIM neighbors appear and downstream join state tracks active interested receivers.

Explanation

Correct Answer

A:

RPF counters and expected (S,G) forwarding stabilize after the route change. This checks the relevant result after compare source-route preference with actual multicast ingress and restore a consistent authorized upstream path.

Incorrect Answers

B:

“Backbone utilization reflects one upstream multicast copy per tree branch while interested receivers obtain the stream” belongs to a separate IP Multicast issue: a trading-data sender needs to serve many local subscribers, but each listener receives its own redundant copy over the backbone. It does not explain the condition tested here.

C:

“Only the specified source delivers data to receivers of the chosen SSM group” belongs to a separate IP Multicast issue: a streaming application expects a source-specific group to accept traffic from any origin, contrary to its (S,G) subscription. It does not explain the condition tested here.

D:

“The required PIM neighbors appear and downstream join state tracks active interested receivers” belongs to a separate IP Multicast issue: a PIM sparse-mode segment cannot maintain neighbor state because PIM is configured on the wrong routed interface. It does not explain the condition tested here.

Question 91

A Junos enterprise team investigates this incident: An industrial sensor lacks a supplicant but needs restricted network authorization through a centralized identity service. Which technical explanation most directly identifies the cause or design principle?

  1. Authentication-method precedence and session state can affect which effective authorization takes hold.
  2. 802.1X authorization depends on the authenticator, supplicant and authentication-server conversation being correctly connected.
  3. MAC RADIUS provides a fallback identity mechanism for suitable non-802.1X devices, with weaker assurance than certificate-based 802.1X.
  4. Supplicant absence is a distinct failure from an invalid credential or unreachable authentication server.

Explanation

Correct Answer

C:

MAC RADIUS provides a fallback identity mechanism for suitable non-802.1X devices, with weaker assurance than certificate-based 802.1X. The appropriate response is to configure supported MAC RADIUS under least-privilege policy and register the device MAC with the approved service.

Incorrect Answers

A:

“Authentication-method precedence and session state can affect which effective authorization takes hold” belongs to a separate Layer 2 Authentication and Access Control issue: two authentication methods are enabled on a shared switch port but fallback ordering bypasses a successful 802.1X result. It does not explain the condition tested here.

B:

“802.1X authorization depends on the authenticator, supplicant and authentication-server conversation being correctly connected” belongs to a separate Layer 2 Authentication and Access Control issue: a campus access interface keeps a compliant supplicant blocked while EAP requests never reach the expected authentication backend. It does not explain the condition tested here.

D:

“Supplicant absence is a distinct failure from an invalid credential or unreachable authentication server” belongs to a separate Layer 2 Authentication and Access Control issue: a switch logs EAP timeout while the endpoint has no 802.1X supplicant, yet the operator rotates valid RADIUS passwords repeatedly. It does not explain the condition tested here.

Question 92

To prevent recurrence of this precise networking failure, which practice should be adopted? Two queues use the same scheduler priority, but the business expects one to always win during contention.

  1. Establish congestion thresholds and monitor starvation as part of queue-priority design.
  2. Plan buffer and shaping rates against provider handoff capacity and expected burst size.
  3. Keep a documented forwarding-class inventory and test default mappings after service changes.
  4. Audit DSCP preservation and remarking at untrusted edge boundaries.

Explanation

Correct Answer

A:

Establish congestion thresholds and monitor starvation as part of queue-priority design. This guards against scheduler priority and bandwidth allocation affect queuing service but must balance fairness and starvation concerns.

Incorrect Answers

B:

“Plan buffer and shaping rates against provider handoff capacity and expected burst size” belongs to a separate Class of Service (CoS) issue: a WAN customer requires smooth outbound transmission but an ingress drop policer creates unnecessary burst loss. It does not explain the condition tested here.

C:

“Keep a documented forwarding-class inventory and test default mappings after service changes” belongs to a separate Class of Service (CoS) issue: an access router has many queue definitions but unexpected class-to-queue mappings cause control traffic to be delayed. It does not explain the condition tested here.

D:

“Audit DSCP preservation and remarking at untrusted edge boundaries” belongs to a separate Class of Service (CoS) issue: a customer access switch trusts external CoS bits and redistributes high-priority markings to all guest traffic. It does not explain the condition tested here.

Question 93

To prevent recurrence of this precise networking failure, which practice should be adopted? An access VLAN floods every multicast packet because IGMP snooping state was lost during migration.

  1. Include source address changes in SSM subscription-management procedures.
  2. Run both allow and deny group tests against multicast policy whenever prefixes are revised.
  3. Keep an approved multicast group allocation and test boundary enforcement after routing changes.
  4. Monitor IGMP membership churn and snooping state when moving clients between VLANs.

Explanation

Correct Answer

D:

Monitor IGMP membership churn and snooping state when moving clients between VLANs. This guards against IGMP reports express receiver interest, and IGMP snooping uses that interest to constrain Layer 2 replication.

Incorrect Answers

A:

“Include source address changes in SSM subscription-management procedures” belongs to a separate IP Multicast issue: a streaming application expects a source-specific group to accept traffic from any origin, contrary to its (S,G) subscription. It does not explain the condition tested here.

B:

“Run both allow and deny group tests against multicast policy whenever prefixes are revised” belongs to a separate IP Multicast issue: an edge router uses a broad multicast filter that blocks valid collaboration groups alongside restricted lab streams. It does not explain the condition tested here.

C:

“Keep an approved multicast group allocation and test boundary enforcement after routing changes” belongs to a separate IP Multicast issue: a laboratory's multicast test group leaks to the corporate backbone despite a requirement to keep it within the lab. It does not explain the condition tested here.

Question 94

A network change is required for the following specific situation: An ABR stops advertising a branch prefix into the backbone after an OSPF area-range summary is configured incorrectly. Which corrective action is most appropriate?

  1. Inspect inet6.0 route detail and route preferences before changing OSPFv3 neighbor configuration.
  2. Review external metric type and value at the originator, then apply the documented traffic-engineering policy.
  3. Inspect IPv6 interface addresses and OSPFv3 interface participation, then add the intended loopback advertisement within policy.
  4. Verify the aggregate range, component prefixes and ABR advertisements, then correct the summary policy to the approved address plan.

Explanation

Correct Answer

D:

Area summarization scope must correctly cover the intended component networks; the wrong range can suppress or misrepresent reachability. Verify this by checking that the backbone receives the intended aggregate and routers can reach all included component subnets.

Incorrect Answers

A:

“Inspect inet6.0 route detail and route preferences before changing OSPFv3 neighbor configuration” belongs to a separate Interior Gateway Protocols (IGPs) issue: a team wrongly concludes OSPFv3 failed when inet6.0 shows a static route active and the OSPFv3 candidate inactive. It does not explain the condition tested here.

B:

“Review external metric type and value at the originator, then apply the documented traffic-engineering policy” belongs to a separate Interior Gateway Protocols (IGPs) issue: an OSPF policy update redistributes a route without an appropriate external metric, shifting traffic to a slow backup. It does not explain the condition tested here.

C:

“Inspect IPv6 interface addresses and OSPFv3 interface participation, then add the intended loopback advertisement within policy” belongs to a separate Interior Gateway Protocols (IGPs) issue: a replacement router has IPv6 OSPFv3 adjacency yet does not advertise the loopback subnet required for monitoring. It does not explain the condition tested here.

Question 95

To prevent recurrence of this precise networking failure, which practice should be adopted? A large campus places hundreds of VLANs in separate spanning-tree instances and reaches scale or CPU limits.

  1. Check policy coverage and unintended-match cases before activating filter-based steering.
  2. Track MSTP instance scale and maintain identical region parameters across participating switches.
  3. Document outer/inner VLAN roles and test tag stripping and preservation at service boundaries.
  4. Include MVRP adjacency and registration checks in trunk-change reviews.

Explanation

Correct Answer

B:

Track MSTP instance scale and maintain identical region parameters across participating switches. This guards against MSTP maps VLANs into a smaller set of spanning-tree instances, providing scalable per-group path control.

Incorrect Answers

A:

“Check policy coverage and unintended-match cases before activating filter-based steering” belongs to a separate Ethernet Switching and Spanning Tree issue: an ingress classification filter for one terminal type inadvertently redirects other hosts using the same uplink. It does not explain the condition tested here.

C:

“Document outer/inner VLAN roles and test tag stripping and preservation at service boundaries” belongs to a separate Ethernet Switching and Spanning Tree issue: a service provider must carry multiple customer VLAN IDs transparently over one metro Ethernet handoff. It does not explain the condition tested here.

D:

“Include MVRP adjacency and registration checks in trunk-change reviews” belongs to a separate Ethernet Switching and Spanning Tree issue: a shared uplink carries dynamically registered VLANs until one device has MVRP disabled during an upgrade. It does not explain the condition tested here.

Question 96

Which suggested shortcut would be especially unsafe for this exact situation? A prefix-list matches a broad aggregate but accepts unwanted subprefixes from a new external neighbor.

  1. Accept every prefix inside the aggregate without evaluating the agreed maximum prefix length.
  2. Maintain community inventories and test outbound policy outcomes for allowed and denied prefixes.
  3. Use multivariable path-selection lab tests before changing MED-based policy.
  4. Test expected best-path behavior before modifying LOCAL_PREF across internal peers.

Explanation

Correct Answer

A:

The tempting alternative fails because BGP route filters must specify permitted exact or range-based prefix matching semantics deliberately. The supported action is to use precise route-filter match conditions and explicit rejection of unauthorized more-specific routes.

Incorrect Answers

B:

That prevention measure relates to a provider-facing policy stops honoring a route-tag community after a new import policy changes the attached communities.; it is not the unsafe shortcut described here.

C:

That prevention measure relates to two equal LOCAL_PREF and AS-path candidates remain tied until MED influences the choice under the applicable comparison rules.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to two iBGP exits offer equal reachable routes but the one with higher LOCAL_PREF is not the egress an operator expected.; it is not the unsafe shortcut described here.

Question 97

The team believes it has resolved this Junos issue: A branch wants to enforce a traffic contract on an incoming service flow yet applies policing to an unrelated egress path. Which observation best verifies the specific intended result?

  1. Observed queue counters show voice packets in the designated forwarding class after classification.
  2. Measured guest ingress usage remains within policy and permitted business traffic is unaffected.
  3. Control-plane-related traffic receives the expected queue treatment under simulated load.
  4. Packet captures show the intended DSCP or 802.1p fields on outbound voice, video and data traffic.

Explanation

Correct Answer

B:

Measured guest ingress usage remains within policy and permitted business traffic is unaffected. This checks the relevant result after apply a correctly scoped ingress policer with tested rate and burst values on the relevant flow.

Incorrect Answers

A:

“Observed queue counters show voice packets in the designated forwarding class after classification” belongs to a separate Class of Service (CoS) issue: a campus uplink transmits marked video as ordinary data because no behavior-aggregate classifier is attached at ingress. It does not explain the condition tested here.

C:

“Control-plane-related traffic receives the expected queue treatment under simulated load” belongs to a separate Class of Service (CoS) issue: a forwarding-class configuration sends critical routing packets to a queue used for bulk backups and adjacency stability degrades under load. It does not explain the condition tested here.

D:

“Packet captures show the intended DSCP or 802.1p fields on outbound voice, video and data traffic” belongs to a separate Class of Service (CoS) issue: a provider handoff expects specific code-point markings yet a trunk rewrites every service class to default behavior. It does not explain the condition tested here.

Question 98

Which suggested shortcut would be especially unsafe for this exact situation? A backup traffic queue consumes too much buffer and latency-sensitive applications starve during peak bursts.

  1. Test ingress classification separately from egress rewrite at every trust boundary.
  2. Keep a documented forwarding-class inventory and test default mappings after service changes.
  3. Test classifier attachment and DSCP mappings on every access and aggregation ingress template.
  4. Increase every queue buffer without considering latency, memory or scheduling priority.

Explanation

Correct Answer

D:

The tempting alternative fails because queue schedulers and buffer parameters influence service rate and delay/drop behavior at congested egress. The supported action is to review queue buffer and scheduler allocations against traffic measurements and apply a bounded adjustment.

Incorrect Answers

A:

That prevention measure relates to a boundary router classifies EF voice traffic correctly but sends outbound DSCP zero, so downstream devices undo priority handling.; it is not the unsafe shortcut described here.

B:

That prevention measure relates to a forwarding-class configuration sends critical routing packets to a queue used for bulk backups and adjacency stability degrades under load.; it is not the unsafe shortcut described here.

C:

That prevention measure relates to a campus uplink transmits marked video as ordinary data because no behavior-aggregate classifier is attached at ingress.; it is not the unsafe shortcut described here.

Question 99

The team believes it has resolved this Junos issue: An enterprise chooses a different BGP exit after import policy assigns a higher local preference to the backup path. Which observation best verifies the specific intended result?

  1. The IPv6 BGP route becomes eligible and forwards over an IPv6-resolvable next hop.
  2. The unauthorized route is rejected while intended export cases still match the proper terms.
  3. The selected BGP route reflects the intended higher LOCAL_PREF, and traceroute follows the approved exit.
  4. The routing and forwarding tables show the intended multiple next hops only for qualifying routes.

Explanation

Correct Answer

C:

The selected BGP route reflects the intended higher LOCAL_PREF, and traceroute follows the approved exit. This checks the relevant result after inspect per-route local preferences and import policy; set the intended exit's LOCAL_PREF consistently.

Incorrect Answers

A:

“The IPv6 BGP route becomes eligible and forwards over an IPv6-resolvable next hop” belongs to a separate Border Gateway Protocol (BGP) issue: an IPv6 BGP peer receives a route with an unreachable IPv6 next hop despite an otherwise valid inet6 unicast advertisement. It does not explain the condition tested here.

B:

“The unauthorized route is rejected while intended export cases still match the proper terms” belongs to a separate Border Gateway Protocol (BGP) issue: a route with a permissive policy term is accepted before a later deny term can block it. It does not explain the condition tested here.

D:

“The routing and forwarding tables show the intended multiple next hops only for qualifying routes” belongs to a separate Border Gateway Protocol (BGP) issue: equal candidate BGP routes are visible but no multipath forwarding entry is installed because eligibility or policy differs. It does not explain the condition tested here.

Question 100

A network change is required for the following specific situation: A MAC RADIUS policy authenticates a known camera but applies the broad employee VLAN instead of a camera-only network. Which corrective action is most appropriate?

  1. Assign the authenticated device to the authorized restricted network profile and verify effective VLAN/filter.
  2. Use a supported restricted server-fail policy and validate failure handling on the specific Junos platform.
  3. Inspect supported method sequencing and enforce the approved 802.1X-first and MAC-exception behavior.
  4. Choose a documented compatible nonbrowser method such as supported MAC RADIUS under narrow access controls.

Explanation

Correct Answer

A:

MAC authorization should couple weak identity to constrained role-based network access, not just a successful RADIUS decision. Verify this by checking that the known device reaches only permitted destinations and cannot reach employee or management resources.

Incorrect Answers

B:

“Use a supported restricted server-fail policy and validate failure handling on the specific Junos platform” belongs to a separate Layer 2 Authentication and Access Control issue: an enterprise fallback design accidentally places unauthenticated users into the production network when all RADIUS servers fail. It does not explain the condition tested here.

C:

“Inspect supported method sequencing and enforce the approved 802.1X-first and MAC-exception behavior” belongs to a separate Layer 2 Authentication and Access Control issue: two authentication methods are enabled on a shared switch port but fallback ordering bypasses a successful 802.1X result. It does not explain the condition tested here.

D:

“Choose a documented compatible nonbrowser method such as supported MAC RADIUS under narrow access controls” belongs to a separate Layer 2 Authentication and Access Control issue: a captive portal requirement is applied to a headless barcode scanner that has no web browser to follow its redirect. It does not explain the condition tested here.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.