100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 1190
Select THREE complementary corrective, verification, or preventive controls for this scenario: A security function needs to classify a subset of traffic by source and destination criteria rather than trusted external markings.
- Document trusted-marking boundaries and test both matched and unmatched multifield traffic.
- Trust arbitrary user DSCP markings as proof every packet belongs in the high-priority class.
- Only traffic meeting the defined match receives the intended queue and packet loss priority.
- Use a permitted firewall or multifield classifier matching the approved traffic fields and assign its forwarding class.
- Raise the permitted long-term traffic rate indefinitely rather than evaluating burst-size configuration.
- Let all untrusted clients self-select expedited forwarding marks without verification.
Explanation
Correct Answers
A:Prevention of recurrence: Multifield classification can use packet fields for policy distinctions beyond incoming BA header code-point classification.
C:Confirmation: Use a permitted firewall or multifield classifier matching the approved traffic fields and assign its forwarding class.
D:Correction: Multifield classification can use packet fields for policy distinctions beyond incoming BA header code-point classification.
Incorrect Answers
B:“Trust arbitrary user DSCP markings as proof every packet belongs in the high-priority class” does not address multifield classification can use packet fields for policy distinctions beyond incoming BA header code-point classification.
E:“Raise the permitted long-term traffic rate indefinitely rather than evaluating burst-size configuration” is an unsafe response to a different problem: a traffic policer drops small microbursts despite an acceptable average rate because its configured burst size is too tight. It is not a valid fix here.
F:“Let all untrusted clients self-select expedited forwarding marks without verification” is an unsafe response to a different problem: a branch egress rewriter incorrectly gives bulk backups the same DSCP as real-time voice. It is not a valid fix here.
Question 1191
To prevent recurrence of this precise networking failure, which practice should be adopted? An OSPF import policy hides external routes on one device while neighbors retain them, confusing the team reviewing reachability.
- Record both LSDB presence and local RIB installation in OSPF troubleshooting runbooks.
- Verify both protocol RIB candidates and active next-hop selection in dual-stack change tests.
- Classify loopbacks and user-facing links separately from peer links when applying passive templates.
- Reserve router IDs from a centrally managed inventory before zero-touch provisioning.
Explanation
Correct Answer
A:Record both LSDB presence and local RIB installation in OSPF troubleshooting runbooks. This guards against local import policy can affect installed route visibility independently of the remote origination of LSAs.
Incorrect Answers
B:“Verify both protocol RIB candidates and active next-hop selection in dual-stack change tests” belongs to a separate Interior Gateway Protocols (IGPs) issue: an IPv6 route learned through OSPFv3 is absent from the forwarding table because a more preferred static route covers the same prefix. It does not explain the condition tested here.
C:“Classify loopbacks and user-facing links separately from peer links when applying passive templates” belongs to a separate Interior Gateway Protocols (IGPs) issue: an OSPF neighbor remains Down because the routed transit interface was left passive after a site template rollout. It does not explain the condition tested here.
D:“Reserve router IDs from a centrally managed inventory before zero-touch provisioning” belongs to a separate Interior Gateway Protocols (IGPs) issue: two newly deployed distribution switches report identical OSPF router IDs, causing inconsistent LSAs in the area. It does not explain the condition tested here.
Question 1192
To prevent recurrence of this precise networking failure, which practice should be adopted? A multihomed CE is attached to two leafs but one leaf advertises a different ESI, preventing expected redundancy behavior.
- Maintain a central VNI registry and test cross-tenant isolation on each leaf rollout.
- Include underlay loopback reachability and MTU checks in VXLAN overlay deployment QA.
- Audit ESI consistency and platform-supported multihoming mode across paired leafs.
- Track route import, MAC mobility and aging during host migration tests.
Explanation
Correct Answer
C:Audit ESI consistency and platform-supported multihoming mode across paired leafs. This guards against EVPN Ethernet segment identifiers associate redundant attachments with one multihoming segment and support coordinated convergence.
Incorrect Answers
A:“Maintain a central VNI registry and test cross-tenant isolation on each leaf rollout” belongs to a separate EVPN issue: a fabric uses conflicting VLAN-to-VNI mappings on two leaf switches, bridging different tenant segments together. It does not explain the condition tested here.
B:“Include underlay loopback reachability and MTU checks in VXLAN overlay deployment QA” belongs to a separate EVPN issue: a VXLAN overlay's BGP EVPN routes are present, but the underlay cannot route to a remote VTEP loopback. It does not explain the condition tested here.
D:“Track route import, MAC mobility and aging during host migration tests” belongs to a separate EVPN issue: a host moves between leafs and the destination leaf still forwards toward the previous MAC location. It does not explain the condition tested here.
Question 1193
Which suggested shortcut would be especially unsafe for this exact situation? An engineer incorrectly assumes a lower MED overrides a larger LOCAL_PREF, when both transit candidates are eligible.
- Use only the MED field as guaranteed proof of the selected route regardless of preceding BGP attributes.
- Review policy ordering with negative tests and explicit default actions on every change.
- Include show route hidden and policy term hit checks in BGP troubleshooting playbooks.
- Audit prefix and mask-length boundaries with positive and negative routing-policy tests.
Explanation
Correct Answer
A:The tempting alternative fails because MED has lower precedence than LOCAL_PREF and AS-path in common BGP best-path selection and must be compared under supported conditions. The supported action is to read all relevant candidate attributes and apply policy consistent with intended tie-breaker precedence.
Incorrect Answers
B:That prevention measure relates to a route with a permissive policy term is accepted before a later deny term can block it.; it is not the unsafe shortcut described here.
C:That prevention measure relates to a remote prefix appears in incoming BGP updates yet never becomes active after a new route policy was applied.; it is not the unsafe shortcut described here.
D:That prevention measure relates to a prefix-list matches a broad aggregate but accepts unwanted subprefixes from a new external neighbor.; it is not the unsafe shortcut described here.
Question 1194
The team believes it has resolved this Junos issue: A telephony desk requires multiple authenticated identities while the switch policy allows only one active supplicant. Which observation best verifies the specific intended result?
- Validation shows only supported options in use and the intended access-denial/fallback behavior.
- Both intended endpoints receive their authorized VLAN/policy without permitting unapproved devices.
- Only the inventoried device has the expected limited connectivity; rogue or unknown hardware is denied.
- The scanner authenticates through the approved method without any browser step, while unknown devices stay denied.
Explanation
Correct Answer
B:Both intended endpoints receive their authorized VLAN/policy without permitting unapproved devices. This checks the relevant result after select a supported multi-supplicant or appropriate phone/PC access mode and test per-device policies.
Incorrect Answers
A:“Validation shows only supported options in use and the intended access-denial/fallback behavior” belongs to a separate Layer 2 Authentication and Access Control issue: an engineer copies legacy 802.1X fallback settings to a platform whose supported feature matrix excludes them. It does not explain the condition tested here.
C:“Only the inventoried device has the expected limited connectivity; rogue or unknown hardware is denied” belongs to a separate Layer 2 Authentication and Access Control issue: a MAC RADIUS device changes its network adapter and can no longer authenticate because its registered identifier is stale. It does not explain the condition tested here.
D:“The scanner authenticates through the approved method without any browser step, while unknown devices stay denied” belongs to a separate Layer 2 Authentication and Access Control issue: a noninteractive sensor is trapped in captive-portal onboarding because operators selected browser authentication for all endpoints. It does not explain the condition tested here.
Question 1195
For this case, select TWO complementary measures or outcome checks that directly resolve the problem: An operator tries to make a remote AS prefer one inbound path using LOCAL_PREF that the remote eBGP peer never receives.
- Disable all iBGP loop protection and expect the route-reflector hierarchy to be unnecessary.
- Expect a locally set LOCAL_PREF value to propagate unchanged over standard eBGP to another AS.
- Select a permitted inbound traffic-engineering mechanism with the provider, such as suitable AS-path prepending or agreed communities.
- External peer advertisements show the intended supported attributes and inbound traffic is measured.
- Assume every unmatched policy term means a route is unconditionally accepted without checking protocol defaults.
Explanation
Correct Answers
C:Select a permitted inbound traffic-engineering mechanism with the provider, such as suitable AS-path prepending or agreed communities. This addresses the dependency that LOCAL_PREF is an intra-AS BGP attribute, not a value routinely advertised to external BGP neighbors.
D:External peer advertisements show the intended supported attributes and inbound traffic is measured. The specific steps required are to select a permitted inbound traffic-engineering mechanism with the provider, such as suitable AS-path prepending or agreed communities.
Incorrect Answers
A:“Disable all iBGP loop protection and expect the route-reflector hierarchy to be unnecessary” is an unsafe response to a different problem: a full-mesh iBGP design is converted to route reflection but one peer is treated as an ordinary nonclient and route propagation fails. It is not a valid fix here.
B:“Expect a locally set LOCAL_PREF value to propagate unchanged over standard eBGP to another AS” does not address LOCAL_PREF is an intra-AS BGP attribute, not a value routinely advertised to external BGP neighbors.
E:“Assume every unmatched policy term means a route is unconditionally accepted without checking protocol defaults” is an unsafe response to a different problem: a route policy lacks an explicit intended default action, and unmatched BGP prefixes behave differently than planned. It is not a valid fix here.
Question 1196
For this case, select TWO complementary measures or outcome checks that directly resolve the problem: An ASM video distribution has valid listener memberships yet PIM joins never converge toward the configured RP.
- Check group-to-RP mapping and RP reachability, then repair the RP discovery or explicit mapping.
- Assume IGMP membership on the access switch alone builds an end-to-end PIM ASM tree.
- Assume an ASM (*,G) join identifies and restricts a unique approved source by itself.
- Enable the same full-bandwidth unicast copy to every receiver and call it multicast optimization.
- PIM joins build the intended shared tree and the requested group begins forwarding to subscribers.
Explanation
Correct Answers
A:Check group-to-RP mapping and RP reachability, then repair the RP discovery or explicit mapping. This addresses the dependency that PIM sparse-mode ASM builds shared-tree state toward a reachable RP, and an incorrect RP mapping can prevent service.
E:PIM joins build the intended shared tree and the requested group begins forwarding to subscribers. The specific steps required are to check group-to-RP mapping and RP reachability, then repair the RP discovery or explicit mapping.
Incorrect Answers
B:“Assume IGMP membership on the access switch alone builds an end-to-end PIM ASM tree” does not address PIM sparse-mode ASM builds shared-tree state toward a reachable RP, and an incorrect RP mapping can prevent service.
C:“Assume an ASM (*,G) join identifies and restricts a unique approved source by itself” is an unsafe response to a different problem: a controlled one-source data feed requires group membership constrained by both source and group, not arbitrary senders. It is not a valid fix here.
D:“Enable the same full-bandwidth unicast copy to every receiver and call it multicast optimization” is an unsafe response to a different problem: a trading-data sender needs to serve many local subscribers, but each listener receives its own redundant copy over the backbone. It is not a valid fix here.
Question 1197
To prevent recurrence of this precise networking failure, which practice should be adopted? A telephony desk requires multiple authenticated identities while the switch policy allows only one active supplicant.
- Track hardware, software edition and port family when standardizing access policies.
- Test fail-open/fail-closed decisions and platform-specific fallback capabilities in disaster recovery exercises.
- Include downstream device count and authentication method in desk-port templates.
- Review authorization policies for MAC endpoints against a least-privilege access matrix.
Explanation
Correct Answer
C:Include downstream device count and authentication method in desk-port templates. This guards against 802.1X host-mode selection affects whether multiple downstream devices can be independently authenticated and authorized.
Incorrect Answers
A:“Track hardware, software edition and port family when standardizing access policies” belongs to a separate Layer 2 Authentication and Access Control issue: an engineer copies legacy 802.1X fallback settings to a platform whose supported feature matrix excludes them. It does not explain the condition tested here.
B:“Test fail-open/fail-closed decisions and platform-specific fallback capabilities in disaster recovery exercises” belongs to a separate Layer 2 Authentication and Access Control issue: an enterprise fallback design accidentally places unauthenticated users into the production network when all RADIUS servers fail. It does not explain the condition tested here.
D:“Review authorization policies for MAC endpoints against a least-privilege access matrix” belongs to a separate Layer 2 Authentication and Access Control issue: a MAC RADIUS policy authenticates a known camera but applies the broad employee VLAN instead of a camera-only network. It does not explain the condition tested here.
Question 1198
The team believes it has resolved this Junos issue: A switch assigns equal PoE power priority to every port and disconnects an emergency phone before low-priority signage during a power shortage. Which observation best verifies the specific intended result?
- The critical phone remains powered during a simulated shortage while lower-priority devices are shed as designed.
- The handset learns the authorized voice VLAN and traffic is tagged and prioritized according to design.
- The phone or location service reports the correct emergency location for the new access port.
- The phone receives voice service on its tagged VLAN and the PC remains on its separate data VLAN.
Explanation
Correct Answer
A:The critical phone remains powered during a simulated shortage while lower-priority devices are shed as designed. This checks the relevant result after set supported higher PoE priority for critical voice endpoints and validate the failure budget.
Incorrect Answers
B:“The handset learns the authorized voice VLAN and traffic is tagged and prioritized according to design” belongs to a separate IP Telephony Features issue: a vendor handset discovers its neighbor using basic LLDP but does not learn the configured network policy for voice tagging. It does not explain the condition tested here.
C:“The phone or location service reports the correct emergency location for the new access port” belongs to a separate IP Telephony Features issue: an IP phone uses the wrong location information for emergency response after a switch move. It does not explain the condition tested here.
D:“The phone receives voice service on its tagged VLAN and the PC remains on its separate data VLAN” belongs to a separate IP Telephony Features issue: a phone-with-PC desk deployment lets the PC reach data services while the tagged voice stream is dropped by VLAN membership. It does not explain the condition tested here.
Question 1199
A network change is required for the following specific situation: A policy-based VLAN filter moves matching device traffic to a quarantine VLAN but a rule fails to match the intended MAC or packet fields. Which corrective action is most appropriate?
- Inspect VSTP VLAN membership, root priority and port roles, then repair the intended per-VLAN root arrangement.
- Inspect the ingress/egress tag-processing configuration and correct the service handoff encapsulation.
- Design supported stacked VLAN tagging and verify S-tag/C-tag placement at the correct ingress and egress.
- Inspect match conditions and attachment point, then change the approved filter-based VLAN steering rule.
Explanation
Correct Answer
D:Filter-based VLAN assignment depends on correctly matching the selected traffic and applying the filter at the right ingress point. Verify this by checking that matching test traffic enters the quarantine VLAN while ordinary traffic stays in the expected VLAN.
Incorrect Answers
A:“Inspect VSTP VLAN membership, root priority and port roles, then repair the intended per-VLAN root arrangement” belongs to a separate Ethernet Switching and Spanning Tree issue: a legacy interop design needs separate per-VLAN spanning-tree compatibility but all VLANs inherit one unsuitable tree. It does not explain the condition tested here.
B:“Inspect the ingress/egress tag-processing configuration and correct the service handoff encapsulation” belongs to a separate Ethernet Switching and Spanning Tree issue: customer traffic emerges with the provider service tag still attached and is rejected by an endpoint expecting ordinary Ethernet. It does not explain the condition tested here.
C:“Design supported stacked VLAN tagging and verify S-tag/C-tag placement at the correct ingress and egress” belongs to a separate Ethernet Switching and Spanning Tree issue: a service provider must carry multiple customer VLAN IDs transparently over one metro Ethernet handoff. It does not explain the condition tested here.
Question 1200
A Junos enterprise team investigates this incident: A redundant network changes the preferred route to the source while packets keep arriving on the other physical link. Which technical explanation most directly identifies the cause or design principle?
- An RPF check is tied to the selected source path, so asymmetric arrival can invalidate otherwise reachable multicast traffic.
- MSDP is used in applicable ASM inter-RP designs to exchange active-source information between rendezvous points.
- IGMP reports express receiver interest, and IGMP snooping uses that interest to constrain Layer 2 replication.
- Policy selectors must match the intended multicast group and source ranges so unrelated services are not blocked or leaked.
Explanation
Correct Answer
A:An RPF check is tied to the selected source path, so asymmetric arrival can invalidate otherwise reachable multicast traffic. The appropriate response is to compare source-route preference with actual multicast ingress and restore a consistent authorized upstream path.
Incorrect Answers
B:“MSDP is used in applicable ASM inter-RP designs to exchange active-source information between rendezvous points” belongs to a separate IP Multicast issue: a multicast source is active in a different PIM domain but the local ASM RP never learns the source mapping. It does not explain the condition tested here.
C:“IGMP reports express receiver interest, and IGMP snooping uses that interest to constrain Layer 2 replication” belongs to a separate IP Multicast issue: a receiver port stops getting multicast because IGMP membership was not processed by the access switch after an interface move. It does not explain the condition tested here.
D:“Policy selectors must match the intended multicast group and source ranges so unrelated services are not blocked or leaked” belongs to a separate IP Multicast issue: an edge router uses a broad multicast filter that blocks valid collaboration groups alongside restricted lab streams. It does not explain the condition tested here.
Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests