Juniper JN0-650 Exam Dumps, Practice Test Questions

100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Juniper JN0-650  Premium File
$54.99
$49.99

JN0-650 Premium File

  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

JN0-650 Premium File

Juniper JN0-650  Premium File
  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$54.99
$49.99

Juniper JN0-650 Practice Test 119

Question 1180

The team believes it has resolved this Junos issue: A host moves between leafs and the destination leaf still forwards toward the previous MAC location. Which observation best verifies the specific intended result?

  1. The remote VTEP becomes reachable and encapsulated packets cross the fabric as intended.
  2. Both peers report a consistent Ethernet segment and failover preserves authorized connectivity.
  3. The current MAC location is learned and traffic reaches the moved endpoint without persistent old-VTEP forwarding.
  4. Tenant traffic reaches only its intended remote bridge domain and overlapping VLAN IDs remain isolated.

Explanation

Correct Answer

C:

The current MAC location is learned and traffic reaches the moved endpoint without persistent old-VTEP forwarding. This checks the relevant result after check relevant BGP EVPN Type 2 advertisements, MAC mobility updates and import policy for the affected bridge domain.

Incorrect Answers

A:

“The remote VTEP becomes reachable and encapsulated packets cross the fabric as intended” belongs to a separate EVPN issue: a VXLAN overlay's BGP EVPN routes are present, but the underlay cannot route to a remote VTEP loopback. It does not explain the condition tested here.

B:

“Both peers report a consistent Ethernet segment and failover preserves authorized connectivity” belongs to a separate EVPN issue: a shared Ethernet segment loses its fast convergence properties after an ESI-LAG peer receives an inconsistent configuration. It does not explain the condition tested here.

D:

“Tenant traffic reaches only its intended remote bridge domain and overlapping VLAN IDs remain isolated” belongs to a separate EVPN issue: a fabric uses conflicting VLAN-to-VNI mappings on two leaf switches, bridging different tenant segments together. It does not explain the condition tested here.

Question 1181

The team believes it has resolved this Junos issue: A campus extension carries the right VXLAN outer header but directs frames to the wrong tenant bridge domain due to bad VNI mapping. Which observation best verifies the specific intended result?

  1. BUM traffic follows permitted designated-forwarder behavior with no persistent looping duplicates.
  2. The current MAC location is learned and traffic reaches the moved endpoint without persistent old-VTEP forwarding.
  3. Tenant traffic reaches only its intended remote bridge domain and overlapping VLAN IDs remain isolated.
  4. BUM traffic reaches only participating VTEPs and the remote endpoint can be discovered.

Explanation

Correct Answer

C:

Tenant traffic reaches only its intended remote bridge domain and overlapping VLAN IDs remain isolated. This checks the relevant result after compare VLAN-to-VNI and bridge-domain assignments on all leafs and correct them against the approved tenant map.

Incorrect Answers

A:

“BUM traffic follows permitted designated-forwarder behavior with no persistent looping duplicates” belongs to a separate EVPN issue: an EVPN multihomed endpoint creates duplicate forwarding when two leafs both forward the same BUM traffic without appropriate split-horizon behavior. It does not explain the condition tested here.

B:

“The current MAC location is learned and traffic reaches the moved endpoint without persistent old-VTEP forwarding” belongs to a separate EVPN issue: a host moves between leafs and the destination leaf still forwards toward the previous MAC location. It does not explain the condition tested here.

D:

“BUM traffic reaches only participating VTEPs and the remote endpoint can be discovered” belongs to a separate EVPN issue: a VNI is active on two leafs but unknown-unicast or broadcast replication never reaches the remote side. It does not explain the condition tested here.

Question 1182

Select THREE complementary corrective, verification, or preventive controls for this scenario: An enterprise fallback design accidentally places unauthenticated users into the production network when all RADIUS servers fail.

  1. During a simulated RADIUS outage, endpoints receive only the approved degraded-connectivity policy.
  2. Configure unrestricted access as the universal RADIUS-outage fallback for sensitive access ports.
  3. Mark every unknown MAC as trusted and give it unrestricted data-VLAN access.
  4. Use a single unauthenticated open port for the phone and PC to bypass host-mode constraints.
  5. Test fail-open/fail-closed decisions and platform-specific fallback capabilities in disaster recovery exercises.
  6. Use a supported restricted server-fail policy and validate failure handling on the specific Junos platform.

Explanation

Correct Answers

A:

Confirmation: Use a supported restricted server-fail policy and validate failure handling on the specific Junos platform.

E:

Prevention of recurrence: Server-fail fallback must be an explicitly scoped authorization policy; availability cannot justify unbounded access.

F:

Correction: Server-fail fallback must be an explicitly scoped authorization policy; availability cannot justify unbounded access.

Incorrect Answers

B:

“Configure unrestricted access as the universal RADIUS-outage fallback for sensitive access ports” does not address server-fail fallback must be an explicitly scoped authorization policy; availability cannot justify unbounded access.

C:

“Mark every unknown MAC as trusted and give it unrestricted data-VLAN access” is an unsafe response to a different problem: an industrial sensor lacks a supplicant but needs restricted network authorization through a centralized identity service. It is not a valid fix here.

D:

“Use a single unauthenticated open port for the phone and PC to bypass host-mode constraints” is an unsafe response to a different problem: an access port is placed in single-supplicant mode but a desk phone and PC must authenticate separately behind the same port. It is not a valid fix here.

Question 1183

Which suggested shortcut would be especially unsafe for this exact situation? A redundant L2 topology creates a broadcast storm after an edge port connected to another switch is treated as an endpoint.

  1. Document outer/inner VLAN roles and test tag stripping and preservation at service boundaries.
  2. Scope and monitor tunneled L2 control protocols to prevent control-plane abuse.
  3. Make every switch-to-switch uplink an edge port to accelerate convergence.
  4. Test gateway and approved shared-service access alongside lateral isolation in PVLAN reviews.

Explanation

Correct Answer

C:

The tempting alternative fails because spanning-tree edge-port assumptions are intended for non-switching endpoints, not redundant bridging connections. The supported action is to remove incorrect edge treatment, validate BPDU reception and restore loop-free port roles.

Incorrect Answers

A:

That prevention measure relates to a service provider must carry multiple customer VLAN IDs transparently over one metro Ethernet handoff.; it is not the unsafe shortcut described here.

B:

That prevention measure relates to an 802.1Q trunk carries customer data through a provider Ethernet segment but fails to forward the required spanning-tree control frames transparently.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to a private VLAN isolated endpoint reaches the local gateway but cannot access a peer service that should be shared via a permitted promiscuous port.; it is not the unsafe shortcut described here.

Question 1184

To prevent recurrence of this precise networking failure, which practice should be adopted? A controlled one-source data feed requires group membership constrained by both source and group, not arbitrary senders.

  1. Include routed-interface PIM enrollment in the multicast deployment checklist.
  2. Document ASM/SSM selection and receiver-version prerequisites before multicast deployment.
  3. Check multicast and unicast topology alignment whenever routing paths or metrics change.
  4. Test RP failover and synchronization behavior before expanding Anycast RP.

Explanation

Correct Answer

B:

Document ASM/SSM selection and receiver-version prerequisites before multicast deployment. This guards against source-specific multicast uses (S,G) membership semantics and generally avoids ASM rendezvous-point discovery for that flow.

Incorrect Answers

A:

“Include routed-interface PIM enrollment in the multicast deployment checklist” belongs to a separate IP Multicast issue: a new L3 VLAN permits unicast connectivity but the PIM Hello adjacency remains absent on the active path. It does not explain the condition tested here.

C:

“Check multicast and unicast topology alignment whenever routing paths or metrics change” belongs to a separate IP Multicast issue: an alternate upstream sends multicast on a path different from the router's route back to the source, causing RPF failures. It does not explain the condition tested here.

D:

“Test RP failover and synchronization behavior before expanding Anycast RP” belongs to a separate IP Multicast issue: a second campus RP is deployed for availability but source-awareness synchronization is omitted where the design requires it. It does not explain the condition tested here.

Question 1185

A Junos enterprise team investigates this incident: A phone supports LLDP-MED but the switch sends no med TLVs after a policy template disables the feature. Which technical explanation most directly identifies the cause or design principle?

  1. PoE priority is a tool for allocating scarce power among endpoints when the chassis budget is constrained.
  2. Base LLDP discovery and LLDP-MED telephony advertisement are distinct capabilities and may require separate enablement.
  3. Physical PoE delivery and negotiated device power requirements must match switch and endpoint capabilities.
  4. Voice/data split depends on compatible VLAN membership, accepted 802.1Q tagging and endpoint network policy.

Explanation

Correct Answer

B:

Base LLDP discovery and LLDP-MED telephony advertisement are distinct capabilities and may require separate enablement. The appropriate response is to review LLDP and LLDP-MED operational status and enable supported MED policy for phone access.

Incorrect Answers

A:

“PoE priority is a tool for allocating scarce power among endpoints when the chassis budget is constrained” belongs to a separate IP Telephony Features issue: a switch assigns equal PoE power priority to every port and disconnects an emergency phone before low-priority signage during a power shortage. It does not explain the condition tested here.

C:

“Physical PoE delivery and negotiated device power requirements must match switch and endpoint capabilities” belongs to a separate IP Telephony Features issue: a phone's LLDP-negotiated power demand exceeds its access port's allocated PoE limit and it repeatedly restarts. It does not explain the condition tested here.

D:

“Voice/data split depends on compatible VLAN membership, accepted 802.1Q tagging and endpoint network policy” belongs to a separate IP Telephony Features issue: a phone-with-PC desk deployment lets the PC reach data services while the tagged voice stream is dropped by VLAN membership. It does not explain the condition tested here.

Question 1186

A Junos enterprise team investigates this incident: A router prefers a longer AS path when a higher LOCAL_PREF makes that route win, surprising the transit team. Which technical explanation most directly identifies the cause or design principle?

  1. LOCAL_PREF is an intra-AS BGP attribute, not a value routinely advertised to external BGP neighbors.
  2. For eligible BGP candidates, LOCAL_PREF comparison precedes AS-path length, so AS-path length alone does not determine the winner.
  3. BGP next-hop resolution must use the appropriate address family; IPv4 routes do not automatically resolve IPv6 next hops.
  4. A reachable BGP peering session does not itself make a third-party route next hop recursively resolvable.

Explanation

Correct Answer

B:

For eligible BGP candidates, LOCAL_PREF comparison precedes AS-path length, so AS-path length alone does not determine the winner. The appropriate response is to examine both attributes in the received route detail and update the explicit routing policy rather than guessing.

Incorrect Answers

A:

“LOCAL_PREF is an intra-AS BGP attribute, not a value routinely advertised to external BGP neighbors” belongs to a separate Border Gateway Protocol (BGP) issue: a dual-homed site changes internal LOCAL_PREF but sees no change in the other autonomous system's inbound traffic choice. It does not explain the condition tested here.

C:

“BGP next-hop resolution must use the appropriate address family; IPv4 routes do not automatically resolve IPv6 next hops” belongs to a separate Border Gateway Protocol (BGP) issue: an IPv6 transit prefix is hidden because its next-hop address is absent from the correct IPv6 routing table. It does not explain the condition tested here.

D:

“A reachable BGP peering session does not itself make a third-party route next hop recursively resolvable” belongs to a separate Border Gateway Protocol (BGP) issue: an iBGP egress advertisement forwards a transit next hop that branch routers cannot resolve, creating traffic blackholes. It does not explain the condition tested here.

Question 1187

Which suggested shortcut would be especially unsafe for this exact situation? A core node shows a missing route while remote LSDBs include the corresponding external LSA after a local policy change.

  1. Keep IPv4 and IPv6 routing verification separate for dual-stack maintenance.
  2. Change the remote area's physical cabling before checking local route filtering.
  3. Run prefix-boundary tests before enabling area aggregation on an ABR.
  4. Make physical and logical MTU parity part of transit-link commissioning and review.

Explanation

Correct Answer

B:

The tempting alternative fails because local import policy can affect installed route visibility independently of the remote origination of LSAs. The supported action is to compare LSDB advertisements with local route policy and inet.0 state; correct the intended import filter.

Incorrect Answers

A:

That prevention measure relates to an IPv6 branch outage is misdiagnosed using only IPv4 pings, despite OSPFv3 neighbors using IPv6 link-local messaging.; it is not the unsafe shortcut described here.

C:

That prevention measure relates to an ABR stops advertising a branch prefix into the backbone after an OSPF area-range summary is configured incorrectly.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to two EX distribution routers in OSPF area 0 remain in ExStart after a new transit VLAN uses inconsistent interface MTUs.; it is not the unsafe shortcut described here.

Question 1188

A network change is required for the following specific situation: OSPFv3 peering comes up but the desired IPv6 loopback is not in the routing database after a rollout. Which corrective action is most appropriate?

  1. Compare LSDB advertisements with local route policy and inet.0 state; correct the intended import filter.
  2. Inspect IPv6 interface addresses and OSPFv3 interface participation, then add the intended loopback advertisement within policy.
  3. Restrict the export policy to explicit approved route prefixes and protocols, then check external LSAs.
  4. Compare OSPF interface timers and align the two peers to approved Hello and dead values.

Explanation

Correct Answer

B:

An established OSPFv3 neighbor does not prove every desired IPv6 interface prefix is included in the protocol topology. Verify this by checking that the remote inet6.0 table learns the intended loopback and reachability testing succeeds.

Incorrect Answers

A:

“Compare LSDB advertisements with local route policy and inet.0 state; correct the intended import filter” belongs to a separate Interior Gateway Protocols (IGPs) issue: an OSPF import policy hides external routes on one device while neighbors retain them, confusing the team reviewing reachability. It does not explain the condition tested here.

C:

“Restrict the export policy to explicit approved route prefixes and protocols, then check external LSAs” belongs to a separate Interior Gateway Protocols (IGPs) issue: an ABR starts leaking a management static route into the enterprise IGP after a permissive export term was introduced. It does not explain the condition tested here.

D:

“Compare OSPF interface timers and align the two peers to approved Hello and dead values” belongs to a separate Interior Gateway Protocols (IGPs) issue: two OSPF routers on a shared transit segment report different Hello and dead intervals and never establish adjacency. It does not explain the condition tested here.

Question 1189

A network change is required for the following specific situation: A Q-in-Q service works across transport but the far-end access handoff presents unexpected double tags. Which corrective action is most appropriate?

  1. Map the trusted endpoints to the proper community secondary VLAN and keep other groups segregated.
  2. Inspect the ingress/egress tag-processing configuration and correct the service handoff encapsulation.
  3. Narrow the match to approved selectors and compare affected packet counters and VLAN assignment.
  4. Remove incorrect edge treatment, validate BPDU reception and restore loop-free port roles.

Explanation

Correct Answer

B:

Q-in-Q requires deliberate tagging and untagging at service boundaries, with customer tags retained according to the handoff contract. Verify this by checking that a packet capture shows the contracted customer tag or untagged frame at the endpoint.

Incorrect Answers

A:

“Map the trusted endpoints to the proper community secondary VLAN and keep other groups segregated” belongs to a separate Ethernet Switching and Spanning Tree issue: a switch rollout splits a team that should communicate within one PVLAN community, while protecting it from another community. It does not explain the condition tested here.

C:

“Narrow the match to approved selectors and compare affected packet counters and VLAN assignment” belongs to a separate Ethernet Switching and Spanning Tree issue: an ingress classification filter for one terminal type inadvertently redirects other hosts using the same uplink. It does not explain the condition tested here.

D:

“Remove incorrect edge treatment, validate BPDU reception and restore loop-free port roles” belongs to a separate Ethernet Switching and Spanning Tree issue: a campus mistakenly enables edge behavior on a switch-to-switch trunk and a loop appears when a backup link activates. It does not explain the condition tested here.

Question 1190

Select THREE complementary corrective, verification, or preventive controls for this scenario: A security function needs to classify a subset of traffic by source and destination criteria rather than trusted external markings.

  1. Document trusted-marking boundaries and test both matched and unmatched multifield traffic.
  2. Trust arbitrary user DSCP markings as proof every packet belongs in the high-priority class.
  3. Only traffic meeting the defined match receives the intended queue and packet loss priority.
  4. Use a permitted firewall or multifield classifier matching the approved traffic fields and assign its forwarding class.
  5. Raise the permitted long-term traffic rate indefinitely rather than evaluating burst-size configuration.
  6. Let all untrusted clients self-select expedited forwarding marks without verification.

Explanation

Correct Answers

A:

Prevention of recurrence: Multifield classification can use packet fields for policy distinctions beyond incoming BA header code-point classification.

C:

Confirmation: Use a permitted firewall or multifield classifier matching the approved traffic fields and assign its forwarding class.

D:

Correction: Multifield classification can use packet fields for policy distinctions beyond incoming BA header code-point classification.

Incorrect Answers

B:

“Trust arbitrary user DSCP markings as proof every packet belongs in the high-priority class” does not address multifield classification can use packet fields for policy distinctions beyond incoming BA header code-point classification.

E:

“Raise the permitted long-term traffic rate indefinitely rather than evaluating burst-size configuration” is an unsafe response to a different problem: a traffic policer drops small microbursts despite an acceptable average rate because its configured burst size is too tight. It is not a valid fix here.

F:

“Let all untrusted clients self-select expedited forwarding marks without verification” is an unsafe response to a different problem: a branch egress rewriter incorrectly gives bulk backups the same DSCP as real-time voice. It is not a valid fix here.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.