Juniper JN0-650 Exam Dumps, Practice Test Questions

100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Juniper JN0-650  Premium File
$54.99
$49.99

JN0-650 Premium File

  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

JN0-650 Premium File

Juniper JN0-650  Premium File
  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$54.99
$49.99

Juniper JN0-650 Practice Test 28

Question 270

A Junos enterprise team investigates this incident: A branch egress rewriter incorrectly gives bulk backups the same DSCP as real-time voice. Which technical explanation most directly identifies the cause or design principle?

  1. Policing behavior depends on both committed rate and burst tolerance; a badly chosen burst parameter can penalize valid traffic.
  2. Scheduler priority and bandwidth allocation affect queuing service but must balance fairness and starvation concerns.
  3. Drop profiles and weighted random early detection influence probabilistic discard thresholds as queue fill rises.
  4. CoS rewrite must reflect trusted classifications and intended forwarding policy, not arbitrary source markings.

Explanation

Correct Answer

D:

CoS rewrite must reflect trusted classifications and intended forwarding policy, not arbitrary source markings. The appropriate response is to define a controlled rewrite map for each class and verify high-priority markings remain restricted.

Incorrect Answers

A:

“Policing behavior depends on both committed rate and burst tolerance; a badly chosen burst parameter can penalize valid traffic” belongs to a separate Class of Service (CoS) issue: a traffic policer drops small microbursts despite an acceptable average rate because its configured burst size is too tight. It does not explain the condition tested here.

B:

“Scheduler priority and bandwidth allocation affect queuing service but must balance fairness and starvation concerns” belongs to a separate Class of Service (CoS) issue: two queues use the same scheduler priority, but the business expects one to always win during contention. It does not explain the condition tested here.

C:

“Drop profiles and weighted random early detection influence probabilistic discard thresholds as queue fill rises” belongs to a separate Class of Service (CoS) issue: a RED drop profile is applied too aggressively and drops packets even under moderate load. It does not explain the condition tested here.

Question 271

For this case, select TWO complementary measures or outcome checks that directly resolve the problem: Members of the same trusted workgroup are accidentally placed in isolated rather than community PVLAN ports and lose peer communication.

  1. Assume the physically fastest switch is always elected as spanning-tree root irrespective of priority.
  2. Make every tenant port promiscuous simply to restore one workgroup's access.
  3. Map the trusted endpoints to the proper community secondary VLAN and keep other groups segregated.
  4. Community members can communicate as intended while cross-community access remains blocked.
  5. Assume setting one global RSTP root automatically produces independently chosen roots for every VSTP VLAN.

Explanation

Correct Answers

C:

Map the trusted endpoints to the proper community secondary VLAN and keep other groups segregated. This addresses the dependency that a private VLAN community allows permitted communication within its community; isolated behavior is stricter.

D:

Community members can communicate as intended while cross-community access remains blocked. The specific steps required are to map the trusted endpoints to the proper community secondary VLAN and keep other groups segregated.

Incorrect Answers

A:

“Assume the physically fastest switch is always elected as spanning-tree root irrespective of priority” is an unsafe response to a different problem: a switch with an unexpectedly low bridge priority becomes MSTP root and redirects aggregation traffic through an access closet. It is not a valid fix here.

B:

“Make every tenant port promiscuous simply to restore one workgroup's access” does not address a private VLAN community allows permitted communication within its community; isolated behavior is stricter.

E:

“Assume setting one global RSTP root automatically produces independently chosen roots for every VSTP VLAN” is an unsafe response to a different problem: a legacy interop design needs separate per-VLAN spanning-tree compatibility but all VLANs inherit one unsuitable tree. It is not a valid fix here.

Question 272

For this case, select TWO complementary measures or outcome checks that directly resolve the problem: Two iBGP exits offer equal reachable routes but the one with higher LOCAL_PREF is not the egress an operator expected.

  1. Use MED changes alone as guaranteed overrides of a conflicting higher local preference.
  2. Accept every prefix inside the aggregate without evaluating the agreed maximum prefix length.
  3. The selected BGP route reflects the intended higher LOCAL_PREF, and traceroute follows the approved exit.
  4. Disable BGP AS-loop safeguards globally to accept any route repeating the local AS.
  5. Inspect per-route local preferences and import policy; set the intended exit's LOCAL_PREF consistently.

Explanation

Correct Answers

C:

The selected BGP route reflects the intended higher LOCAL_PREF, and traceroute follows the approved exit. The specific steps required are to inspect per-route local preferences and import policy; set the intended exit's LOCAL_PREF consistently.

E:

Inspect per-route local preferences and import policy; set the intended exit's LOCAL_PREF consistently. This addresses the dependency that BGP typically prefers a larger LOCAL_PREF among otherwise eligible candidates before later path-selection tie breakers.

Incorrect Answers

A:

“Use MED changes alone as guaranteed overrides of a conflicting higher local preference” does not address BGP typically prefers a larger LOCAL_PREF among otherwise eligible candidates before later path-selection tie breakers.

B:

“Accept every prefix inside the aggregate without evaluating the agreed maximum prefix length” is an unsafe response to a different problem: a prefix-list matches a broad aggregate but accepts unwanted subprefixes from a new external neighbor. It is not a valid fix here.

D:

“Disable BGP AS-loop safeguards globally to accept any route repeating the local AS” is an unsafe response to a different problem: a carrier changes an upstream routing arrangement and a downstream Junos router detects its own AS in the advertised AS path. It is not a valid fix here.

Question 273

To prevent recurrence of this precise networking failure, which practice should be adopted? A noninteractive sensor is trapped in captive-portal onboarding because operators selected browser authentication for all endpoints.

  1. Classify interactive and headless endpoint requirements before choosing the access method.
  2. Require inventory ownership and anomaly monitoring for MAC RADIUS exceptions.
  3. Review MAC-device inventory, spoofing exposure and expiry before using MAC-based authorization.
  4. Review authorization policies for MAC endpoints against a least-privilege access matrix.

Explanation

Correct Answer

A:

Classify interactive and headless endpoint requirements before choosing the access method. This guards against captive portals presume interactive browser capabilities, making them unsuitable as the sole access method for headless devices.

Incorrect Answers

B:

“Require inventory ownership and anomaly monitoring for MAC RADIUS exceptions” belongs to a separate Layer 2 Authentication and Access Control issue: a printer's MAC address is duplicated by an unauthorized endpoint that obtains the same weak MAC-based policy. It does not explain the condition tested here.

C:

“Review MAC-device inventory, spoofing exposure and expiry before using MAC-based authorization” belongs to a separate Layer 2 Authentication and Access Control issue: an industrial sensor lacks a supplicant but needs restricted network authorization through a centralized identity service. It does not explain the condition tested here.

D:

“Review authorization policies for MAC endpoints against a least-privilege access matrix” belongs to a separate Layer 2 Authentication and Access Control issue: a MAC RADIUS policy authenticates a known camera but applies the broad employee VLAN instead of a camera-only network. It does not explain the condition tested here.

Question 274

A network change is required for the following specific situation: A shared guest access VLAN allows two untrusted hotel-room ports to communicate directly, violating the isolation design. Which corrective action is most appropriate?

  1. Inspect primary and secondary private VLAN roles and port membership; restore approved isolated/community mappings.
  2. Design supported stacked VLAN tagging and verify S-tag/C-tag placement at the correct ingress and egress.
  3. Remove incorrect edge treatment, validate BPDU reception and restore loop-free port roles.
  4. Compare complete region configuration on the peers and restore the approved shared MSTP region values.

Explanation

Correct Answer

A:

Private VLAN isolated ports are designed to limit lateral L2 communication while still reaching the permitted promiscuous uplink. Verify this by checking that two isolated tenant ports cannot reach each other but can reach the permitted gateway uplink.

Incorrect Answers

B:

“Design supported stacked VLAN tagging and verify S-tag/C-tag placement at the correct ingress and egress” belongs to a separate Ethernet Switching and Spanning Tree issue: an aggregation network sees customer VLAN IDs collide because several tenants share the same single-tagged provider infrastructure. It does not explain the condition tested here.

C:

“Remove incorrect edge treatment, validate BPDU reception and restore loop-free port roles” belongs to a separate Ethernet Switching and Spanning Tree issue: a campus mistakenly enables edge behavior on a switch-to-switch trunk and a loop appears when a backup link activates. It does not explain the condition tested here.

D:

“Compare complete region configuration on the peers and restore the approved shared MSTP region values” belongs to a separate Ethernet Switching and Spanning Tree issue: an uplink becomes a region boundary unexpectedly after an administrator changes an MSTP configuration name on only one switch. It does not explain the condition tested here.

Question 275

To prevent recurrence of this precise networking failure, which practice should be adopted? A VNI is active on two leafs but unknown-unicast or broadcast replication never reaches the remote side.

  1. Include underlay loopback reachability and MTU checks in VXLAN overlay deployment QA.
  2. Audit ESI consistency and platform-supported multihoming mode across paired leafs.
  3. Test multihoming election and per-VLAN failover after attaching new dual-homed devices.
  4. Validate EVPN Type 2 and Type 3 propagation separately in new VNI bring-up tests.

Explanation

Correct Answer

D:

Validate EVPN Type 2 and Type 3 propagation separately in new VNI bring-up tests. This guards against EVPN Type 3 inclusive multicast routes announce interested VTEPs for a broadcast domain's BUM replication set.

Incorrect Answers

A:

“Include underlay loopback reachability and MTU checks in VXLAN overlay deployment QA” belongs to a separate EVPN issue: a VXLAN overlay's BGP EVPN routes are present, but the underlay cannot route to a remote VTEP loopback. It does not explain the condition tested here.

B:

“Audit ESI consistency and platform-supported multihoming mode across paired leafs” belongs to a separate EVPN issue: a multihomed CE is attached to two leafs but one leaf advertises a different ESI, preventing expected redundancy behavior. It does not explain the condition tested here.

C:

“Test multihoming election and per-VLAN failover after attaching new dual-homed devices” belongs to a separate EVPN issue: an EVPN multihomed endpoint creates duplicate forwarding when two leafs both forward the same BUM traffic without appropriate split-horizon behavior. It does not explain the condition tested here.

Question 276

To prevent recurrence of this precise networking failure, which practice should be adopted? An IPv6 branch outage is misdiagnosed using only IPv4 pings, despite OSPFv3 neighbors using IPv6 link-local messaging.

  1. Validate per-interface OSPF area assignments from an approved topology matrix before commit.
  2. Document expected external metrics and run primary/backup failover tests during policy changes.
  3. Keep IPv4 and IPv6 routing verification separate for dual-stack maintenance.
  4. Classify loopbacks and user-facing links separately from peer links when applying passive templates.

Explanation

Correct Answer

C:

Keep IPv4 and IPv6 routing verification separate for dual-stack maintenance. This guards against IPv4 packet reachability does not independently validate OSPFv3's IPv6 link-local neighbor exchanges.

Incorrect Answers

A:

“Validate per-interface OSPF area assignments from an approved topology matrix before commit” belongs to a separate Interior Gateway Protocols (IGPs) issue: a campus OSPF interface is accidentally placed in area 0 while its neighbor advertises a nonbackbone area, preventing a Full adjacency. It does not explain the condition tested here.

B:

“Document expected external metrics and run primary/backup failover tests during policy changes” belongs to a separate Interior Gateway Protocols (IGPs) issue: an OSPF policy update redistributes a route without an appropriate external metric, shifting traffic to a slow backup. It does not explain the condition tested here.

D:

“Classify loopbacks and user-facing links separately from peer links when applying passive templates” belongs to a separate Interior Gateway Protocols (IGPs) issue: a distribution node learns connected subnets but never sends Hello packets on its OSPF transit port due to passive-interface policy. It does not explain the condition tested here.

Question 277

Which suggested shortcut would be especially unsafe for this exact situation? A new leaf imports VNI reachability but packets disappear because its VXLAN tunnel endpoint IP is unresolved.

  1. Test multihoming election and per-VLAN failover after attaching new dual-homed devices.
  2. Audit ESI consistency and platform-supported multihoming mode across paired leafs.
  3. Track route import, MAC mobility and aging during host migration tests.
  4. Increase a tenant VLAN identifier and expect it to fix an unreachable underlay VTEP IP.

Explanation

Correct Answer

D:

The tempting alternative fails because VXLAN encapsulates overlay traffic across an IP underlay; VTEP reachability is necessary even with valid BGP EVPN control-plane state. The supported action is to repair authorized underlay routing to remote VTEPs and check tunnel reachability before changing EVPN policies.

Incorrect Answers

A:

That prevention measure relates to an EVPN multihomed endpoint creates duplicate forwarding when two leafs both forward the same BUM traffic without appropriate split-horizon behavior.; it is not the unsafe shortcut described here.

B:

That prevention measure relates to a shared Ethernet segment loses its fast convergence properties after an ESI-LAG peer receives an inconsistent configuration.; it is not the unsafe shortcut described here.

C:

“Track route import, MAC mobility and aging during host migration tests” instead concerns another network scenario: A new endpoint MAC is learned at a remote VTEP but never reaches the receiving leaf's EVPN control-plane table. It does not address the requirement here.

Question 278

A Junos enterprise team investigates this incident: Two eBGP sessions over different transports are expected to provide ECMP but only one forwarding next hop appears. Which technical explanation most directly identifies the cause or design principle?

  1. A reachable BGP peering session does not itself make a third-party route next hop recursively resolvable.
  2. BGP equal-cost multipath requires appropriate configured support and matching eligible path attributes, not merely two established sessions.
  3. For eligible BGP candidates, LOCAL_PREF comparison precedes AS-path length, so AS-path length alone does not determine the winner.
  4. LOCAL_PREF is an intra-AS BGP attribute, not a value routinely advertised to external BGP neighbors.

Explanation

Correct Answer

B:

BGP equal-cost multipath requires appropriate configured support and matching eligible path attributes, not merely two established sessions. The appropriate response is to compare BGP best-path and multipath eligibility conditions, then enable approved multipath behavior and validate forwarding.

Incorrect Answers

A:

“A reachable BGP peering session does not itself make a third-party route next hop recursively resolvable” belongs to a separate Border Gateway Protocol (BGP) issue: an iBGP egress advertisement forwards a transit next hop that branch routers cannot resolve, creating traffic blackholes. It does not explain the condition tested here.

C:

“For eligible BGP candidates, LOCAL_PREF comparison precedes AS-path length, so AS-path length alone does not determine the winner” belongs to a separate Border Gateway Protocol (BGP) issue: a branch dual-transit design sees the higher-preference provider route win even though its AS path has more hops. It does not explain the condition tested here.

D:

“LOCAL_PREF is an intra-AS BGP attribute, not a value routinely advertised to external BGP neighbors” belongs to a separate Border Gateway Protocol (BGP) issue: an operator tries to make a remote AS prefer one inbound path using LOCAL_PREF that the remote eBGP peer never receives. It does not explain the condition tested here.

Question 279

To prevent recurrence of this precise networking failure, which practice should be adopted? A phone-with-PC desk deployment lets the PC reach data services while the tagged voice stream is dropped by VLAN membership.

  1. Capacity-plan PoE power classes and reserved headroom before connecting new powered devices.
  2. Test both tagged phone frames and untagged PC frames during phone-port commissioning.
  3. Review LLDP-MED state and phone compliance during access-switch template audits.
  4. Validate PD power profiles and test peak draw rather than idle boot alone.

Explanation

Correct Answer

B:

Test both tagged phone frames and untagged PC frames during phone-port commissioning. This guards against voice/data split depends on compatible VLAN membership, accepted 802.1Q tagging and endpoint network policy.

Incorrect Answers

A:

“Capacity-plan PoE power classes and reserved headroom before connecting new powered devices” belongs to a separate IP Telephony Features issue: a high-power phone intermittently reboots whenever all powered endpoints on a switch chassis start simultaneously. It does not explain the condition tested here.

C:

“Review LLDP-MED state and phone compliance during access-switch template audits” belongs to a separate IP Telephony Features issue: a phone supports LLDP-MED but the switch sends no med TLVs after a policy template disables the feature. It does not explain the condition tested here.

D:

“Validate PD power profiles and test peak draw rather than idle boot alone” belongs to a separate IP Telephony Features issue: an emergency intercom can establish Ethernet link but loses power during activity because its PD class is not supported by that port. It does not explain the condition tested here.

Question 280

For this case, select TWO complementary measures or outcome checks that directly resolve the problem: A forwarding-class configuration sends critical routing packets to a queue used for bulk backups and adjacency stability degrades under load.

  1. Review the forwarding class and queue map for control and data traffic and apply the intended assignments.
  2. Control-plane-related traffic receives the expected queue treatment under simulated load.
  3. Create a scheduler definition in configuration but never bind the scheduler map to egress interfaces.
  4. Assume more queues automatically improve latency even if control traffic remains mapped to a congested queue.
  5. Assume any policing rule provides the same paced, buffered behavior as egress shaping.

Explanation

Correct Answers

A:

Review the forwarding class and queue map for control and data traffic and apply the intended assignments. This addresses the dependency that forwarding classes select output queues; an incorrect class-to-queue association can cause head-of-line delays.

B:

Control-plane-related traffic receives the expected queue treatment under simulated load. The specific steps required are to review the forwarding class and queue map for control and data traffic and apply the intended assignments.

Incorrect Answers

C:

“Create a scheduler definition in configuration but never bind the scheduler map to egress interfaces” is an unsafe response to a different problem: a low-latency queue is correctly classified but voice delays because its egress scheduler map is absent from the trunk. It is not a valid fix here.

D:

“Assume more queues automatically improve latency even if control traffic remains mapped to a congested queue” does not address forwarding classes select output queues; an incorrect class-to-queue association can cause head-of-line delays.

E:

“Assume any policing rule provides the same paced, buffered behavior as egress shaping” is an unsafe response to a different problem: a WAN customer requires smooth outbound transmission but an ingress drop policer creates unnecessary burst loss. It is not a valid fix here.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.