Juniper JN0-650 Exam Dumps, Practice Test Questions

100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Juniper JN0-650  Premium File
$54.99
$49.99

JN0-650 Premium File

  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

JN0-650 Premium File

Juniper JN0-650  Premium File
  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$54.99
$49.99

Juniper JN0-650 Practice Test 27

Question 260

To prevent recurrence of this precise networking failure, which practice should be adopted? A multicast team changes unicast routing yet an engineered multicast RPF table still points to an obsolete next hop.

  1. Document ASM/SSM selection and receiver-version prerequisites before multicast deployment.
  2. Document whether multicast RPF uses inet.0 or inet.2 and verify after topology changes.
  3. Maintain consistent RP mappings and failover tests across multicast routers.
  4. Include routed-interface PIM enrollment in the multicast deployment checklist.

Explanation

Correct Answer

B:

Document whether multicast RPF uses inet.0 or inet.2 and verify after topology changes. This guards against Junos multicast RPF may use a dedicated routing table, so the effective RPF path must be inspected, not guessed from unicast traffic.

Incorrect Answers

A:

“Document ASM/SSM selection and receiver-version prerequisites before multicast deployment” belongs to a separate IP Multicast issue: a video source is known and receivers support IGMPv3, but engineers configure ASM and an RP unnecessarily for the source-specific application. It does not explain the condition tested here.

C:

“Maintain consistent RP mappings and failover tests across multicast routers” belongs to a separate IP Multicast issue: an ASM video distribution has valid listener memberships yet PIM joins never converge toward the configured RP. It does not explain the condition tested here.

D:

“Include routed-interface PIM enrollment in the multicast deployment checklist” belongs to a separate IP Multicast issue: a new L3 VLAN permits unicast connectivity but the PIM Hello adjacency remains absent on the active path. It does not explain the condition tested here.

Question 261

To prevent recurrence of this precise networking failure, which practice should be adopted? A redundant network changes the preferred route to the source while packets keep arriving on the other physical link.

  1. Keep an approved multicast group allocation and test boundary enforcement after routing changes.
  2. Maintain consistent RP mappings and failover tests across multicast routers.
  3. Test multicast source-path behavior under each failover case, not only unicast ping.
  4. Test RP failover and synchronization behavior before expanding Anycast RP.

Explanation

Correct Answer

C:

Test multicast source-path behavior under each failover case, not only unicast ping. This guards against an RPF check is tied to the selected source path, so asymmetric arrival can invalidate otherwise reachable multicast traffic.

Incorrect Answers

A:

“Keep an approved multicast group allocation and test boundary enforcement after routing changes” belongs to a separate IP Multicast issue: a financial multicast feed intended for one campus crosses the WAN because no boundary controls are configured. It does not explain the condition tested here.

B:

“Maintain consistent RP mappings and failover tests across multicast routers” belongs to a separate IP Multicast issue: a PIM sparse-mode receiver has an IGMP join but no multicast traffic because its upstream router cannot resolve the rendezvous point. It does not explain the condition tested here.

D:

“Test RP failover and synchronization behavior before expanding Anycast RP” belongs to a separate IP Multicast issue: a second campus RP is deployed for availability but source-awareness synchronization is omitted where the design requires it. It does not explain the condition tested here.

Question 262

To prevent recurrence of this precise networking failure, which practice should be adopted? An engineer incorrectly assumes a lower MED overrides a larger LOCAL_PREF, when both transit candidates are eligible.

  1. Use multivariable path-selection lab tests before changing MED-based policy.
  2. Test path equivalence, forwarding and failure convergence before enabling transit ECMP.
  3. Include show route hidden and policy term hit checks in BGP troubleshooting playbooks.
  4. Record eBGP peer transport depth and endpoint routing in deployment templates.

Explanation

Correct Answer

A:

Use multivariable path-selection lab tests before changing MED-based policy. This guards against MED has lower precedence than LOCAL_PREF and AS-path in common BGP best-path selection and must be compared under supported conditions.

Incorrect Answers

B:

“Test path equivalence, forwarding and failure convergence before enabling transit ECMP” belongs to a separate Border Gateway Protocol (BGP) issue: equal candidate BGP routes are visible but no multipath forwarding entry is installed because eligibility or policy differs. It does not explain the condition tested here.

C:

“Include show route hidden and policy term hit checks in BGP troubleshooting playbooks” belongs to a separate Border Gateway Protocol (BGP) issue: a remote prefix appears in incoming BGP updates yet never becomes active after a new route policy was applied. It does not explain the condition tested here.

D:

“Record eBGP peer transport depth and endpoint routing in deployment templates” belongs to a separate Border Gateway Protocol (BGP) issue: a transit peering is moved off directly connected interface IPs to loopbacks yet the TTL and reachability design are not updated. It does not explain the condition tested here.

Question 263

A network change is required for the following specific situation: A troubleshooting team expects EVPN Ethernet auto-discovery route Type 1 to carry all host MAC/IP bindings. Which corrective action is most appropriate?

  1. Align the intended ESI and supported LAG mode, then inspect relevant EVPN Type 1 and Type 4 routes.
  2. Compare VLAN-to-VNI and bridge-domain assignments on all leafs and correct them against the approved tenant map.
  3. Repair authorized underlay routing to remote VTEPs and check tunnel reachability before changing EVPN policies.
  4. Inspect the route type appropriate to the claimed control-plane information instead of treating all EVPN NLRIs equally.

Explanation

Correct Answer

D:

EVPN route types carry different information: Type 1 Ethernet auto-discovery, Type 2 MAC/IP, Type 3 inclusive multicast. Verify this by checking that the expected MAC/IP binding is visible in Type 2 while multihoming and BUM state use their own route types.

Incorrect Answers

A:

“Align the intended ESI and supported LAG mode, then inspect relevant EVPN Type 1 and Type 4 routes” belongs to a separate EVPN issue: a shared Ethernet segment loses its fast convergence properties after an ESI-LAG peer receives an inconsistent configuration. It does not explain the condition tested here.

B:

“Compare VLAN-to-VNI and bridge-domain assignments on all leafs and correct them against the approved tenant map” belongs to a separate EVPN issue: a campus extension carries the right VXLAN outer header but directs frames to the wrong tenant bridge domain due to bad VNI mapping. It does not explain the condition tested here.

C:

“Repair authorized underlay routing to remote VTEPs and check tunnel reachability before changing EVPN policies” belongs to a separate EVPN issue: a new leaf imports VNI reachability but packets disappear because its VXLAN tunnel endpoint IP is unresolved. It does not explain the condition tested here.

Question 264

A Junos enterprise team investigates this incident: A guest network should be rate-limited at ingress, but engineers configure only an egress shaper on the uplink. Which technical explanation most directly identifies the cause or design principle?

  1. Junos egress rewrite rules map internal forwarding class and PLP back into supported packet header markings.
  2. A policer enforces traffic rate or burst limits and can discard or mark out-of-profile input; shaping buffers traffic for paced egress.
  3. Drop profiles and weighted random early detection influence probabilistic discard thresholds as queue fill rises.
  4. Scheduler priority and bandwidth allocation affect queuing service but must balance fairness and starvation concerns.

Explanation

Correct Answer

B:

A policer enforces traffic rate or burst limits and can discard or mark out-of-profile input; shaping buffers traffic for paced egress. The appropriate response is to apply a correctly scoped ingress policer with tested rate and burst values on the relevant flow.

Incorrect Answers

A:

“Junos egress rewrite rules map internal forwarding class and PLP back into supported packet header markings” belongs to a separate Class of Service (CoS) issue: a provider handoff expects specific code-point markings yet a trunk rewrites every service class to default behavior. It does not explain the condition tested here.

C:

“Drop profiles and weighted random early detection influence probabilistic discard thresholds as queue fill rises” belongs to a separate Class of Service (CoS) issue: a RED drop profile is applied too aggressively and drops packets even under moderate load. It does not explain the condition tested here.

D:

“Scheduler priority and bandwidth allocation affect queuing service but must balance fairness and starvation concerns” belongs to a separate Class of Service (CoS) issue: a finance video queue configured as low priority cannot meet latency targets because competing transfers share the same service policy. It does not explain the condition tested here.

Question 265

Select THREE complementary corrective, verification, or preventive controls for this scenario: An IPv6 branch outage is misdiagnosed using only IPv4 pings, despite OSPFv3 neighbors using IPv6 link-local messaging.

  1. Check IPv6 link-local addressing, OSPFv3 neighbor state and relevant ICMPv6 connectivity on the actual interface.
  2. The affected link passes OSPFv3 neighbor and IPv6 reachability checks rather than IPv4-only tests.
  3. Record a successful IPv4 echo response as conclusive proof that OSPFv3 is healthy.
  4. Advertise an arbitrary wide aggregate that includes unrelated networks to make the missing route disappear.
  5. Add a catch-all accept at the end of the policy to bypass the source-type error.
  6. Keep IPv4 and IPv6 routing verification separate for dual-stack maintenance.

Explanation

Correct Answers

A:

Correction: IPv4 packet reachability does not independently validate OSPFv3's IPv6 link-local neighbor exchanges.

B:

Confirmation: Check IPv6 link-local addressing, OSPFv3 neighbor state and relevant ICMPv6 connectivity on the actual interface.

F:

Prevention of recurrence: IPv4 packet reachability does not independently validate OSPFv3's IPv6 link-local neighbor exchanges.

Incorrect Answers

C:

“Record a successful IPv4 echo response as conclusive proof that OSPFv3 is healthy” does not address IPv4 packet reachability does not independently validate OSPFv3's IPv6 link-local neighbor exchanges.

D:

“Advertise an arbitrary wide aggregate that includes unrelated networks to make the missing route disappear” is an unsafe response to a different problem: a campus summarization change hides a needed subnet because the configured address range omits it. It is not a valid fix here.

E:

“Add a catch-all accept at the end of the policy to bypass the source-type error” is an unsafe response to a different problem: a branch default-route injection stops after a policy matches OSPF-learned routes instead of the intended local static. It is not a valid fix here.

Question 266

A Junos enterprise team investigates this incident: An access switch is moved to Junos OS Evolved but the team assumes every earlier guest-VLAN feature still exists on L2 802.1X interfaces. Which technical explanation most directly identifies the cause or design principle?

  1. 802.1X host-mode selection affects whether multiple downstream devices can be independently authenticated and authorized.
  2. MAC-based identity is tied to the observed hardware address and can be spoofed; it is not strong user authentication.
  3. 802.1X guest and fallback capabilities are platform and Junos variant specific; unsupported features must not be assumed.
  4. Captive portals presume interactive browser capabilities, making them unsuitable as the sole access method for headless devices.

Explanation

Correct Answer

C:

802.1X guest and fallback capabilities are platform and Junos variant specific; unsupported features must not be assumed. The appropriate response is to consult the target release's official 802.1X support matrix and adapt the authorization design to supported methods.

Incorrect Answers

A:

“802.1X host-mode selection affects whether multiple downstream devices can be independently authenticated and authorized” belongs to a separate Layer 2 Authentication and Access Control issue: a telephony desk requires multiple authenticated identities while the switch policy allows only one active supplicant. It does not explain the condition tested here.

B:

“MAC-based identity is tied to the observed hardware address and can be spoofed; it is not strong user authentication” belongs to a separate Layer 2 Authentication and Access Control issue: a MAC RADIUS device changes its network adapter and can no longer authenticate because its registered identifier is stale. It does not explain the condition tested here.

D:

“Captive portals presume interactive browser capabilities, making them unsuitable as the sole access method for headless devices” belongs to a separate Layer 2 Authentication and Access Control issue: a noninteractive sensor is trapped in captive-portal onboarding because operators selected browser authentication for all endpoints. It does not explain the condition tested here.

Question 267

The team believes it has resolved this Junos issue: Two EX distribution routers in OSPF area 0 remain in ExStart after a new transit VLAN uses inconsistent interface MTUs. Which observation best verifies the specific intended result?

  1. The peers advance to Full and successfully exchange database summaries after an approved aligned-MTU change.
  2. An OSPFv3 neighbor forms and approved IPv6 prefixes appear in inet6.0.
  3. The expected prefix becomes active locally while unwanted external prefixes remain filtered.
  4. The affected link passes OSPFv3 neighbor and IPv6 reachability checks rather than IPv4-only tests.

Explanation

Correct Answer

A:

The peers advance to Full and successfully exchange database summaries after an approved aligned-MTU change. This checks the relevant result after compare interface MTUs and OSPF neighbor states, then align the supported interface MTU on both endpoints.

Incorrect Answers

B:

“An OSPFv3 neighbor forms and approved IPv6 prefixes appear in inet6.0” belongs to a separate Interior Gateway Protocols (IGPs) issue: an IPv6-only branch has OSPFv3 Hellos on the wrong logical unit after interface renumbering, so no IPv6 routes appear. It does not explain the condition tested here.

C:

“The expected prefix becomes active locally while unwanted external prefixes remain filtered” belongs to a separate Interior Gateway Protocols (IGPs) issue: a core node shows a missing route while remote LSDBs include the corresponding external LSA after a local policy change. It does not explain the condition tested here.

D:

“The affected link passes OSPFv3 neighbor and IPv6 reachability checks rather than IPv4-only tests” belongs to a separate Interior Gateway Protocols (IGPs) issue: an OSPFv3 adjacency on a dual-stack campus changes state because engineers treat IPv4 interface reachability as proof of IPv6 control-plane health. It does not explain the condition tested here.

Question 268

Which suggested shortcut would be especially unsafe for this exact situation? A route policy lacks an explicit intended default action, and unmatched BGP prefixes behave differently than planned.

  1. Record eBGP peer transport depth and endpoint routing in deployment templates.
  2. Validate all required BGP address families during dual-stack peer commissioning.
  3. Assume every unmatched policy term means a route is unconditionally accepted without checking protocol defaults.
  4. Validate every route-reflector client and failover path in topology inventory before conversion.

Explanation

Correct Answer

C:

The tempting alternative fails because routing-policy evaluation depends on term matches, flow-control actions and the policy chain, including what happens on no match. The supported action is to document and test terminal accept or reject behavior along with next-term and next-policy handling.

Incorrect Answers

A:

That prevention measure relates to a multihop eBGP peer uses loopback addresses but its session times out when directly connected assumptions remain.; it is not the unsafe shortcut described here.

B:

That prevention measure relates to BGP peers exchange IPv4 NLRI correctly but a planned IPv6 customer route never appears in inet6.0.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to a route-reflector topology loses an iBGP-advertised prefix because clients are not configured under the intended reflector cluster.; it is not the unsafe shortcut described here.

Question 269

To prevent recurrence of this precise networking failure, which practice should be adopted? A captive portal requirement is applied to a headless barcode scanner that has no web browser to follow its redirect.

  1. Classify interactive and headless endpoint requirements before choosing the access method.
  2. Require inventory ownership and anomaly monitoring for MAC RADIUS exceptions.
  3. Review MAC-device inventory, spoofing exposure and expiry before using MAC-based authorization.
  4. Document and test EAP timeout, explicit rejection and server-unavailable cases separately.

Explanation

Correct Answer

A:

Classify interactive and headless endpoint requirements before choosing the access method. This guards against captive portals presume interactive browser capabilities, making them unsuitable as the sole access method for headless devices.

Incorrect Answers

B:

“Require inventory ownership and anomaly monitoring for MAC RADIUS exceptions” belongs to a separate Layer 2 Authentication and Access Control issue: a MAC RADIUS device changes its network adapter and can no longer authenticate because its registered identifier is stale. It does not explain the condition tested here.

C:

“Review MAC-device inventory, spoofing exposure and expiry before using MAC-based authorization” belongs to a separate Layer 2 Authentication and Access Control issue: an industrial sensor lacks a supplicant but needs restricted network authorization through a centralized identity service. It does not explain the condition tested here.

D:

“Document and test EAP timeout, explicit rejection and server-unavailable cases separately” belongs to a separate Layer 2 Authentication and Access Control issue: a credential-rejected user is sent to the guest VLAN even though the planned design reserves guest VLAN for silent non-supplicants. It does not explain the condition tested here.

Question 270

A Junos enterprise team investigates this incident: A branch egress rewriter incorrectly gives bulk backups the same DSCP as real-time voice. Which technical explanation most directly identifies the cause or design principle?

  1. Policing behavior depends on both committed rate and burst tolerance; a badly chosen burst parameter can penalize valid traffic.
  2. Scheduler priority and bandwidth allocation affect queuing service but must balance fairness and starvation concerns.
  3. Drop profiles and weighted random early detection influence probabilistic discard thresholds as queue fill rises.
  4. CoS rewrite must reflect trusted classifications and intended forwarding policy, not arbitrary source markings.

Explanation

Correct Answer

D:

CoS rewrite must reflect trusted classifications and intended forwarding policy, not arbitrary source markings. The appropriate response is to define a controlled rewrite map for each class and verify high-priority markings remain restricted.

Incorrect Answers

A:

“Policing behavior depends on both committed rate and burst tolerance; a badly chosen burst parameter can penalize valid traffic” belongs to a separate Class of Service (CoS) issue: a traffic policer drops small microbursts despite an acceptable average rate because its configured burst size is too tight. It does not explain the condition tested here.

B:

“Scheduler priority and bandwidth allocation affect queuing service but must balance fairness and starvation concerns” belongs to a separate Class of Service (CoS) issue: two queues use the same scheduler priority, but the business expects one to always win during contention. It does not explain the condition tested here.

C:

“Drop profiles and weighted random early detection influence probabilistic discard thresholds as queue fill rises” belongs to a separate Class of Service (CoS) issue: a RED drop profile is applied too aggressively and drops packets even under moderate load. It does not explain the condition tested here.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.