Juniper JN0-650 Exam Dumps, Practice Test Questions

100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Juniper JN0-650  Premium File
$54.99
$49.99

JN0-650 Premium File

  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

JN0-650 Premium File

Juniper JN0-650  Premium File
  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$54.99
$49.99

Juniper JN0-650 Practice Test 47

Question 460

A Junos enterprise team investigates this incident: The local AS appears in a received external BGP AS_PATH and the route is rejected despite valid prefix reachability. Which technical explanation most directly identifies the cause or design principle?

  1. The default BGP AS-path loop check rejects routes containing the local autonomous system to prevent loops.
  2. BGP address-family negotiation controls which IPv4 or IPv6 NLRI can be exchanged independently of session state.
  3. BGP route selection first requires the BGP next hop to resolve through the appropriate routing table.
  4. For eligible BGP candidates, LOCAL_PREF comparison precedes AS-path length, so AS-path length alone does not determine the winner.

Explanation

Correct Answer

A:

The default BGP AS-path loop check rejects routes containing the local autonomous system to prevent loops. The appropriate response is to check the advertised AS sequence and correct the peering or routing design instead of bypassing loop checks.

Incorrect Answers

B:

“BGP address-family negotiation controls which IPv4 or IPv6 NLRI can be exchanged independently of session state” belongs to a separate Border Gateway Protocol (BGP) issue: a campus router's BGP IPv6 session is Established yet peers advertise only inet unicast family routes. It does not explain the condition tested here.

C:

“BGP route selection first requires the BGP next hop to resolve through the appropriate routing table” belongs to a separate Border Gateway Protocol (BGP) issue: an iBGP route is received from a reflector but hidden because its third-party next hop is unreachable in inet.0. It does not explain the condition tested here.

D:

“For eligible BGP candidates, LOCAL_PREF comparison precedes AS-path length, so AS-path length alone does not determine the winner” belongs to a separate Border Gateway Protocol (BGP) issue: a branch dual-transit design sees the higher-preference provider route win even though its AS path has more hops. It does not explain the condition tested here.

Question 461

A network change is required for the following specific situation: An iBGP egress advertisement forwards a transit next hop that branch routers cannot resolve, creating traffic blackholes. Which corrective action is most appropriate?

  1. Put specific deny conditions before broad acceptance, and test the policy with representative routes.
  2. Inspect next-hop attributes and IGP reachability; deliberately choose appropriate next-hop-self policy or add valid underlay routes.
  3. Enable the intended inet6 family consistently on eligible BGP peers and verify route policy and inet6.0.
  4. Examine both attributes in the received route detail and update the explicit routing policy rather than guessing.

Explanation

Correct Answer

B:

A reachable BGP peering session does not itself make a third-party route next hop recursively resolvable. Verify this by checking that route detail shows a reachable next hop and end-to-end forwarding through the intended border router.

Incorrect Answers

A:

“Put specific deny conditions before broad acceptance, and test the policy with representative routes” belongs to a separate Border Gateway Protocol (BGP) issue: a BGP export configuration has a broad first match so a specific downstream deny never evaluates the target prefix. It does not explain the condition tested here.

C:

“Enable the intended inet6 family consistently on eligible BGP peers and verify route policy and inet6.0” belongs to a separate Border Gateway Protocol (BGP) issue: BGP peers exchange IPv4 NLRI correctly but a planned IPv6 customer route never appears in inet6.0. It does not explain the condition tested here.

D:

“Examine both attributes in the received route detail and update the explicit routing policy rather than guessing” belongs to a separate Border Gateway Protocol (BGP) issue: a branch dual-transit design sees the higher-preference provider route win even though its AS path has more hops. It does not explain the condition tested here.

Question 462

A Junos enterprise team investigates this incident: A branch dual-transit design sees the higher-preference provider route win even though its AS path has more hops. Which technical explanation most directly identifies the cause or design principle?

  1. Junos normally exports active routes; advertise-inactive can expose a best BGP candidate that lost to another protocol.
  2. For eligible BGP candidates, LOCAL_PREF comparison precedes AS-path length, so AS-path length alone does not determine the winner.
  3. iBGP-learned routes are not freely re-advertised to all iBGP neighbors without appropriate reflection or topology.
  4. The default BGP AS-path loop check rejects routes containing the local autonomous system to prevent loops.

Explanation

Correct Answer

B:

For eligible BGP candidates, LOCAL_PREF comparison precedes AS-path length, so AS-path length alone does not determine the winner. The appropriate response is to examine both attributes in the received route detail and update the explicit routing policy rather than guessing.

Incorrect Answers

A:

“Junos normally exports active routes; advertise-inactive can expose a best BGP candidate that lost to another protocol” belongs to a separate Border Gateway Protocol (BGP) issue: a BGP export policy advertises a prefix that exists only as an inactive local candidate, despite an expectation of default active-only behavior. It does not explain the condition tested here.

C:

“iBGP-learned routes are not freely re-advertised to all iBGP neighbors without appropriate reflection or topology” belongs to a separate Border Gateway Protocol (BGP) issue: a route-reflector topology loses an iBGP-advertised prefix because clients are not configured under the intended reflector cluster. It does not explain the condition tested here.

D:

“The default BGP AS-path loop check rejects routes containing the local autonomous system to prevent loops” belongs to a separate Border Gateway Protocol (BGP) issue: the local AS appears in a received external BGP AS_PATH and the route is rejected despite valid prefix reachability. It does not explain the condition tested here.

Question 463

A network change is required for the following specific situation: A backup traffic queue consumes too much buffer and latency-sensitive applications starve during peak bursts. Which corrective action is most appropriate?

  1. Apply a correctly scoped ingress policer with tested rate and burst values on the relevant flow.
  2. Measure burst patterns and adjust the policer burst configuration within the authorized service contract.
  3. Review the forwarding class and queue map for control and data traffic and apply the intended assignments.
  4. Review queue buffer and scheduler allocations against traffic measurements and apply a bounded adjustment.

Explanation

Correct Answer

D:

Queue schedulers and buffer parameters influence service rate and delay/drop behavior at congested egress. Verify this by checking that queue depth, latency and drop statistics meet documented objectives during realistic traffic load.

Incorrect Answers

A:

“Apply a correctly scoped ingress policer with tested rate and burst values on the relevant flow” belongs to a separate Class of Service (CoS) issue: a branch wants to enforce a traffic contract on an incoming service flow yet applies policing to an unrelated egress path. It does not explain the condition tested here.

B:

“Measure burst patterns and adjust the policer burst configuration within the authorized service contract” belongs to a separate Class of Service (CoS) issue: an uplink meets long-term bandwidth policy but legitimate short bursts exceed the token-bucket allowance. It does not explain the condition tested here.

C:

“Review the forwarding class and queue map for control and data traffic and apply the intended assignments” belongs to a separate Class of Service (CoS) issue: an access router has many queue definitions but unexpected class-to-queue mappings cause control traffic to be delayed. It does not explain the condition tested here.

Question 464

A Junos enterprise team investigates this incident: A newly deployed IP phone joins the data network because the switch does not advertise the intended voice VLAN through LLDP-MED. Which technical explanation most directly identifies the cause or design principle?

  1. PoE priority is a tool for allocating scarce power among endpoints when the chassis budget is constrained.
  2. LLDP-MED extends device discovery with telephony-related network-policy TLVs that need compatible endpoint behavior.
  3. PoE availability depends on the supported per-port power class and total switch power budget, not just Ethernet link status.
  4. Physical PoE delivery and negotiated device power requirements must match switch and endpoint capabilities.

Explanation

Correct Answer

B:

LLDP-MED extends device discovery with telephony-related network-policy TLVs that need compatible endpoint behavior. The appropriate response is to enable supported LLDP-MED network policy on the phone-facing port and verify advertisements and phone settings.

Incorrect Answers

A:

“PoE priority is a tool for allocating scarce power among endpoints when the chassis budget is constrained” belongs to a separate IP Telephony Features issue: a switch assigns equal PoE power priority to every port and disconnects an emergency phone before low-priority signage during a power shortage. It does not explain the condition tested here.

C:

“PoE availability depends on the supported per-port power class and total switch power budget, not just Ethernet link status” belongs to a separate IP Telephony Features issue: a voice handset fails to boot on an EX switch port after new cameras consume the remaining PoE budget. It does not explain the condition tested here.

D:

“Physical PoE delivery and negotiated device power requirements must match switch and endpoint capabilities” belongs to a separate IP Telephony Features issue: an emergency intercom can establish Ethernet link but loses power during activity because its PD class is not supported by that port. It does not explain the condition tested here.

Question 465

The team believes it has resolved this Junos issue: A bridge domain has valid unicast Type 2 entries yet remote VTEPs do not discover a new participating segment for BUM forwarding. Which observation best verifies the specific intended result?

  1. Tenant traffic reaches only its intended remote bridge domain and overlapping VLAN IDs remain isolated.
  2. The remote VTEP becomes reachable and encapsulated packets cross the fabric as intended.
  3. Full-sized authorized frames traverse the VXLAN tunnel without unexpected fragmentation or blackholing.
  4. BUM traffic reaches only participating VTEPs and the remote endpoint can be discovered.

Explanation

Correct Answer

D:

BUM traffic reaches only participating VTEPs and the remote endpoint can be discovered. This checks the relevant result after inspect Type 3 routes and VNI import/export membership; repair the intended inclusive-multicast advertisement.

Incorrect Answers

A:

“Tenant traffic reaches only its intended remote bridge domain and overlapping VLAN IDs remain isolated” belongs to a separate EVPN issue: a fabric uses conflicting VLAN-to-VNI mappings on two leaf switches, bridging different tenant segments together. It does not explain the condition tested here.

B:

“The remote VTEP becomes reachable and encapsulated packets cross the fabric as intended” belongs to a separate EVPN issue: a new leaf imports VNI reachability but packets disappear because its VXLAN tunnel endpoint IP is unresolved. It does not explain the condition tested here.

C:

“Full-sized authorized frames traverse the VXLAN tunnel without unexpected fragmentation or blackholing” belongs to a separate EVPN issue: an EVPN-VXLAN frame is dropped over a path where the IP underlay MTU was sized only for unencapsulated Ethernet payloads. It does not explain the condition tested here.

Question 466

Which suggested shortcut would be especially unsafe for this exact situation? A route with a permissive policy term is accepted before a later deny term can block it.

  1. Validate all required BGP address families during dual-stack peer commissioning.
  2. Append an extra deny at the end and assume it overrides a prior terminal accept.
  3. Validate every route-reflector client and failover path in topology inventory before conversion.
  4. Track every BGP advertise-inactive exception and test cross-protocol route selection.

Explanation

Correct Answer

B:

The tempting alternative fails because routing-policy term order and terminal actions determine whether later conditions are evaluated. The supported action is to put specific deny conditions before broad acceptance, and test the policy with representative routes.

Incorrect Answers

A:

That prevention measure relates to a campus router's BGP IPv6 session is Established yet peers advertise only inet unicast family routes.; it is not the unsafe shortcut described here.

C:

That prevention measure relates to a full-mesh iBGP design is converted to route reflection but one peer is treated as an ordinary nonclient and route propagation fails.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to a BGP export policy advertises a prefix that exists only as an inactive local candidate, despite an expectation of default active-only behavior.; it is not the unsafe shortcut described here.

Question 467

Which suggested shortcut would be especially unsafe for this exact situation? An IPv6 branch outage is misdiagnosed using only IPv4 pings, despite OSPFv3 neighbors using IPv6 link-local messaging.

  1. Make physical and logical MTU parity part of transit-link commissioning and review.
  2. Classify loopbacks and user-facing links separately from peer links when applying passive templates.
  3. Record a successful IPv4 echo response as conclusive proof that OSPFv3 is healthy.
  4. Validate per-interface OSPF area assignments from an approved topology matrix before commit.

Explanation

Correct Answer

C:

The tempting alternative fails because IPv4 packet reachability does not independently validate OSPFv3's IPv6 link-local neighbor exchanges. The supported action is to check IPv6 link-local addressing, OSPFv3 neighbor state and relevant ICMPv6 connectivity on the actual interface.

Incorrect Answers

A:

That prevention measure relates to two EX distribution routers in OSPF area 0 remain in ExStart after a new transit VLAN uses inconsistent interface MTUs.; it is not the unsafe shortcut described here.

B:

That prevention measure relates to a distribution node learns connected subnets but never sends Hello packets on its OSPF transit port due to passive-interface policy.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to a branch uplink uses area 0.0.0.6 on one router and area 0.0.0.9 on its peer after a template copy.; it is not the unsafe shortcut described here.

Question 468

A network change is required for the following specific situation: A WAN customer requires smooth outbound transmission but an ingress drop policer creates unnecessary burst loss. Which corrective action is most appropriate?

  1. Apply an approved behavior-aggregate classifier with the intended DSCP-to-class mapping on the real ingress interface.
  2. Map the two packet categories to the intended PLP levels and verify drop-profile response.
  3. Associate the approved scheduler map with the correct egress interface and confirm class queue counters.
  4. Configure supported egress shaping at the bottleneck and verify throughput and queue behavior.

Explanation

Correct Answer

D:

Shaping buffers and schedules outgoing traffic to a rate, unlike policing which marks or discards traffic exceeding a contract. Verify this by checking that outgoing traffic conforms to the contracted rate with acceptable delay and fewer burst losses.

Incorrect Answers

A:

“Apply an approved behavior-aggregate classifier with the intended DSCP-to-class mapping on the real ingress interface” belongs to a separate Class of Service (CoS) issue: voice packets arrive with DSCP EF but are placed into the best-effort queue after a new access interface template is applied. It does not explain the condition tested here.

B:

“Map the two packet categories to the intended PLP levels and verify drop-profile response” belongs to a separate Class of Service (CoS) issue: packets with two different drop precedence values are treated as equally discardable during congestion. It does not explain the condition tested here.

C:

“Associate the approved scheduler map with the correct egress interface and confirm class queue counters” belongs to a separate Class of Service (CoS) issue: a campus has configured forwarding classes and schedulers but one uplink carries all traffic through default service because association is missing. It does not explain the condition tested here.

Question 469

Which suggested shortcut would be especially unsafe for this exact situation? A campus migration removes a VLAN at the source while a trunk continues advertising it unexpectedly.

  1. Check policy coverage and unintended-match cases before activating filter-based steering.
  2. Audit edge classifications and apply appropriate BPDU protection on true client-facing ports.
  3. Delete all VLANs from every trunk to clear one stale MVRP registration.
  4. Maintain representative match and nonmatch tests for filter-based VLAN policies.

Explanation

Correct Answer

C:

The tempting alternative fails because MVRP registrations can persist where membership state or participation has not been updated consistently. The supported action is to inspect registration state and remove stale VLAN membership while preserving necessary registrations.

Incorrect Answers

A:

That prevention measure relates to a filter-based VLAN security design uses a rule that catches too many packets and steers legitimate devices into quarantine.; it is not the unsafe shortcut described here.

B:

That prevention measure relates to a campus mistakenly enables edge behavior on a switch-to-switch trunk and a loop appears when a backup link activates.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to a campus onboarding policy puts cameras on the normal data VLAN even though a targeted filter-based VLAN should steer them.; it is not the unsafe shortcut described here.

Question 470

The team believes it has resolved this Junos issue: A large campus places hundreds of VLANs in separate spanning-tree instances and reaches scale or CPU limits. Which observation best verifies the specific intended result?

  1. Matching test traffic enters the quarantine VLAN while ordinary traffic stays in the expected VLAN.
  2. A packet capture shows the contracted customer tag or untagged frame at the endpoint.
  3. Isolated clients reach the shared service but cannot communicate laterally with other isolated clients.
  4. The required VLAN groups follow their designated MSTI paths without per-VLAN instance explosion.

Explanation

Correct Answer

D:

The required VLAN groups follow their designated MSTI paths without per-VLAN instance explosion. This checks the relevant result after create an approved MSTP region and VLAN-to-instance mapping, then verify root and port role behavior.

Incorrect Answers

A:

“Matching test traffic enters the quarantine VLAN while ordinary traffic stays in the expected VLAN” belongs to a separate Ethernet Switching and Spanning Tree issue: a policy-based VLAN filter moves matching device traffic to a quarantine VLAN but a rule fails to match the intended MAC or packet fields. It does not explain the condition tested here.

B:

“A packet capture shows the contracted customer tag or untagged frame at the endpoint” belongs to a separate Ethernet Switching and Spanning Tree issue: customer traffic emerges with the provider service tag still attached and is rejected by an endpoint expecting ordinary Ethernet. It does not explain the condition tested here.

C:

“Isolated clients reach the shared service but cannot communicate laterally with other isolated clients” belongs to a separate Ethernet Switching and Spanning Tree issue: a building's private VLAN design inadvertently limits tenant access to a shared printer uplink while direct tenant communication is supposed to stay blocked. It does not explain the condition tested here.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.