Juniper JN0-650 Exam Dumps, Practice Test Questions

100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Juniper JN0-650  Premium File
$54.99
$49.99

JN0-650 Premium File

  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

JN0-650 Premium File

Juniper JN0-650  Premium File
  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$54.99
$49.99

Juniper JN0-650 Practice Test 65

Question 640

Which suggested shortcut would be especially unsafe for this exact situation? A branch dual-transit design sees the higher-preference provider route win even though its AS path has more hops.

  1. Include next-hop reachability tests in iBGP and route-reflector deployment acceptance.
  2. Assume the shortest AS path must win regardless of any LOCAL_PREF difference.
  3. Review policy ordering with negative tests and explicit default actions on every change.
  4. Include show route hidden and policy term hit checks in BGP troubleshooting playbooks.

Explanation

Correct Answer

B:

The tempting alternative fails because for eligible BGP candidates, LOCAL_PREF comparison precedes AS-path length, so AS-path length alone does not determine the winner. The supported action is to examine both attributes in the received route detail and update the explicit routing policy rather than guessing.

Incorrect Answers

A:

That prevention measure relates to an iBGP route is received from a reflector but hidden because its third-party next hop is unreachable in inet.0.; it is not the unsafe shortcut described here.

C:

That prevention measure relates to a BGP export configuration has a broad first match so a specific downstream deny never evaluates the target prefix.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to a Junos route is hidden by import policy, but the team troubleshoots only local physical interfaces.; it is not the unsafe shortcut described here.

Question 641

To prevent recurrence of this precise networking failure, which practice should be adopted? A replacement router has IPv6 OSPFv3 adjacency yet does not advertise the loopback subnet required for monitoring.

  1. Validate per-interface OSPF area assignments from an approved topology matrix before commit.
  2. Include a checklist of advertised IPv6 service and loopback addresses in OSPFv3 acceptance.
  3. Test one allowed and one forbidden route against each export policy term before deployment.
  4. Make physical and logical MTU parity part of transit-link commissioning and review.

Explanation

Correct Answer

B:

Include a checklist of advertised IPv6 service and loopback addresses in OSPFv3 acceptance. This guards against an established OSPFv3 neighbor does not prove every desired IPv6 interface prefix is included in the protocol topology.

Incorrect Answers

A:

“Validate per-interface OSPF area assignments from an approved topology matrix before commit” belongs to a separate Interior Gateway Protocols (IGPs) issue: a campus OSPF interface is accidentally placed in area 0 while its neighbor advertises a nonbackbone area, preventing a Full adjacency. It does not explain the condition tested here.

C:

“Test one allowed and one forbidden route against each export policy term before deployment” belongs to a separate Interior Gateway Protocols (IGPs) issue: a branch default-route injection stops after a policy matches OSPF-learned routes instead of the intended local static. It does not explain the condition tested here.

D:

“Make physical and logical MTU parity part of transit-link commissioning and review” instead concerns another network scenario: Two EX distribution routers in OSPF area 0 remain in ExStart after a new transit VLAN uses inconsistent interface MTUs. It does not address the requirement here.

Question 642

For this case, select TWO complementary measures or outcome checks that directly resolve the problem: A VSTP network intended to send voice and data VLANs over different active paths instead blocks both on the same uplink.

  1. Delete all VLANs from every trunk to clear one stale MVRP registration.
  2. Inspect VSTP VLAN membership, root priority and port roles, then repair the intended per-VLAN root arrangement.
  3. Assume setting one global RSTP root automatically produces independently chosen roots for every VSTP VLAN.
  4. Assume every endpoint supports stacked 802.1Q tags even when the customer ordered a single-tagged handoff.
  5. Selected voice and data VLANs use the approved active links without loops.

Explanation

Correct Answers

B:

Inspect VSTP VLAN membership, root priority and port roles, then repair the intended per-VLAN root arrangement. This addresses the dependency that VSTP provides per-VLAN spanning-tree behavior for compatibility and path control when the design and platform support it.

E:

Selected voice and data VLANs use the approved active links without loops. The specific steps required are to inspect VSTP VLAN membership, root priority and port roles, then repair the intended per-VLAN root arrangement.

Incorrect Answers

A:

“Delete all VLANs from every trunk to clear one stale MVRP registration” is an unsafe response to a different problem: a campus migration removes a VLAN at the source while a trunk continues advertising it unexpectedly. It is not a valid fix here.

C:

“Assume setting one global RSTP root automatically produces independently chosen roots for every VSTP VLAN” does not address VSTP provides per-VLAN spanning-tree behavior for compatibility and path control when the design and platform support it.

D:

“Assume every endpoint supports stacked 802.1Q tags even when the customer ordered a single-tagged handoff” is an unsafe response to a different problem: customer traffic emerges with the provider service tag still attached and is rejected by an endpoint expecting ordinary Ethernet. It is not a valid fix here.

Question 643

Which suggested shortcut would be especially unsafe for this exact situation? A dual-homed site changes internal LOCAL_PREF but sees no change in the other autonomous system's inbound traffic choice.

  1. Test path equivalence, forwarding and failure convergence before enabling transit ECMP.
  2. Expect a locally set LOCAL_PREF value to propagate unchanged over standard eBGP to another AS.
  3. Review next-hop propagation and IGP coverage whenever an eBGP route enters iBGP.
  4. Track every BGP advertise-inactive exception and test cross-protocol route selection.

Explanation

Correct Answer

B:

The tempting alternative fails because LOCAL_PREF is an intra-AS BGP attribute, not a value routinely advertised to external BGP neighbors. The supported action is to select a permitted inbound traffic-engineering mechanism with the provider, such as suitable AS-path prepending or agreed communities.

Incorrect Answers

A:

That prevention measure relates to equal candidate BGP routes are visible but no multipath forwarding entry is installed because eligibility or policy differs.; it is not the unsafe shortcut described here.

C:

That prevention measure relates to a route-reflector client receives an external destination but lacks the underlay path to the advertised next hop.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to an engineer adds advertise-inactive and downstream peers begin receiving a BGP route that loses to an OSPF route locally.; it is not the unsafe shortcut described here.

Question 644

A Junos enterprise team investigates this incident: A switch assigns a misconfigured laptop with incorrect EAP credentials to a VLAN intended only for devices that never attempt 802.1X. Which technical explanation most directly identifies the cause or design principle?

  1. Guest, server-reject and server-fail outcomes represent different causes and require distinct supported policies.
  2. 802.1X authorization depends on the authenticator, supplicant and authentication-server conversation being correctly connected.
  3. Authentication success and postauthentication VLAN/policy assignment are separate stages whose feature support may vary.
  4. MAC RADIUS provides a fallback identity mechanism for suitable non-802.1X devices, with weaker assurance than certificate-based 802.1X.

Explanation

Correct Answer

A:

Guest, server-reject and server-fail outcomes represent different causes and require distinct supported policies. The appropriate response is to check authentication result classification and map the rejected user to an appropriate deny or reject response.

Incorrect Answers

B:

“802.1X authorization depends on the authenticator, supplicant and authentication-server conversation being correctly connected” belongs to a separate Layer 2 Authentication and Access Control issue: a corporate laptop presents valid 802.1X credentials but stays unauthorized because the switch is using the wrong RADIUS server profile. It does not explain the condition tested here.

C:

“Authentication success and postauthentication VLAN/policy assignment are separate stages whose feature support may vary” belongs to a separate Layer 2 Authentication and Access Control issue: a switch receives successful RADIUS Access-Accept but the user still lands in an unexpected VLAN because the dynamic assignment is not supported on that platform. It does not explain the condition tested here.

D:

“MAC RADIUS provides a fallback identity mechanism for suitable non-802.1X devices, with weaker assurance than certificate-based 802.1X” belongs to a separate Layer 2 Authentication and Access Control issue: an industrial sensor lacks a supplicant but needs restricted network authorization through a centralized identity service. It does not explain the condition tested here.

Question 645

A network change is required for the following specific situation: A campus summarization change hides a needed subnet because the configured address range omits it. Which corrective action is most appropriate?

  1. Verify the aggregate range, component prefixes and ABR advertisements, then correct the summary policy to the approved address plan.
  2. Inspect inet6.0 route detail and route preferences before changing OSPFv3 neighbor configuration.
  3. Compare LSDB advertisements with local route policy and inet.0 state; correct the intended import filter.
  4. Review external metric type and value at the originator, then apply the documented traffic-engineering policy.

Explanation

Correct Answer

A:

Area summarization scope must correctly cover the intended component networks; the wrong range can suppress or misrepresent reachability. Verify this by checking that the backbone receives the intended aggregate and routers can reach all included component subnets.

Incorrect Answers

B:

“Inspect inet6.0 route detail and route preferences before changing OSPFv3 neighbor configuration” belongs to a separate Interior Gateway Protocols (IGPs) issue: a team wrongly concludes OSPFv3 failed when inet6.0 shows a static route active and the OSPFv3 candidate inactive. It does not explain the condition tested here.

C:

“Compare LSDB advertisements with local route policy and inet.0 state; correct the intended import filter” belongs to a separate Interior Gateway Protocols (IGPs) issue: a core node shows a missing route while remote LSDBs include the corresponding external LSA after a local policy change. It does not explain the condition tested here.

D:

“Review external metric type and value at the originator, then apply the documented traffic-engineering policy” belongs to a separate Interior Gateway Protocols (IGPs) issue: an OSPF policy update redistributes a route without an appropriate external metric, shifting traffic to a slow backup. It does not explain the condition tested here.

Question 646

To prevent recurrence of this precise networking failure, which practice should be adopted? A branch default-route injection stops after a policy matches OSPF-learned routes instead of the intended local static.

  1. Run prefix-boundary tests before enabling area aggregation on an ABR.
  2. Test one allowed and one forbidden route against each export policy term before deployment.
  3. Keep timer settings in shared configuration templates and validate both directions before rollout.
  4. Validate per-interface OSPF area assignments from an approved topology matrix before commit.

Explanation

Correct Answer

B:

Test one allowed and one forbidden route against each export policy term before deployment. This guards against routing-policy match criteria must align with the source route type and the intended OSPF export behavior.

Incorrect Answers

A:

“Run prefix-boundary tests before enabling area aggregation on an ABR” belongs to a separate Interior Gateway Protocols (IGPs) issue: a campus summarization change hides a needed subnet because the configured address range omits it. It does not explain the condition tested here.

C:

“Keep timer settings in shared configuration templates and validate both directions before rollout” belongs to a separate Interior Gateway Protocols (IGPs) issue: an access-area adjacency drops after one device is changed to shorter OSPF Hello timers but its peer keeps prior settings. It does not explain the condition tested here.

D:

“Validate per-interface OSPF area assignments from an approved topology matrix before commit” belongs to a separate Interior Gateway Protocols (IGPs) issue: a campus OSPF interface is accidentally placed in area 0 while its neighbor advertises a nonbackbone area, preventing a Full adjacency. It does not explain the condition tested here.

Question 647

To prevent recurrence of this precise networking failure, which practice should be adopted? An access-area adjacency drops after one device is changed to shorter OSPF Hello timers but its peer keeps prior settings.

  1. Record both LSDB presence and local RIB installation in OSPF troubleshooting runbooks.
  2. Keep timer settings in shared configuration templates and validate both directions before rollout.
  3. Test one allowed and one forbidden route against each export policy term before deployment.
  4. Verify both protocol RIB candidates and active next-hop selection in dual-stack change tests.

Explanation

Correct Answer

B:

Keep timer settings in shared configuration templates and validate both directions before rollout. This guards against OSPF neighbors require compatible Hello and dead interval settings on the shared interface.

Incorrect Answers

A:

“Record both LSDB presence and local RIB installation in OSPF troubleshooting runbooks” belongs to a separate Interior Gateway Protocols (IGPs) issue: an OSPF import policy hides external routes on one device while neighbors retain them, confusing the team reviewing reachability. It does not explain the condition tested here.

C:

“Test one allowed and one forbidden route against each export policy term before deployment” belongs to a separate Interior Gateway Protocols (IGPs) issue: a branch default-route injection stops after a policy matches OSPF-learned routes instead of the intended local static. It does not explain the condition tested here.

D:

“Verify both protocol RIB candidates and active next-hop selection in dual-stack change tests” belongs to a separate Interior Gateway Protocols (IGPs) issue: an IPv6 route learned through OSPFv3 is absent from the forwarding table because a more preferred static route covers the same prefix. It does not explain the condition tested here.

Question 648

The team believes it has resolved this Junos issue: A campus multicast application migrates ASM clients to SSM but does not update the source-qualified membership requests. Which observation best verifies the specific intended result?

  1. The selected upstream RPF neighbor and packet arrival interface agree, restoring intended multicast flow.
  2. Remote ASM receivers can discover the intended source and request multicast delivery through the proper tree.
  3. RPF errors stop and the expected multicast stream reaches the subscribed downstream interfaces.
  4. Only the specified source delivers data to receivers of the chosen SSM group.

Explanation

Correct Answer

D:

Only the specified source delivers data to receivers of the chosen SSM group. This checks the relevant result after update receiver memberships to use the approved source and group, and validate end-to-end (S,G) trees.

Incorrect Answers

A:

“The selected upstream RPF neighbor and packet arrival interface agree, restoring intended multicast flow” belongs to a separate IP Multicast issue: a multicast team changes unicast routing yet an engineered multicast RPF table still points to an obsolete next hop. It does not explain the condition tested here.

B:

“Remote ASM receivers can discover the intended source and request multicast delivery through the proper tree” belongs to a separate IP Multicast issue: a receiver domain requires discovery of sources known behind another RP, yet inter-RP source information exchange is absent. It does not explain the condition tested here.

C:

“RPF errors stop and the expected multicast stream reaches the subscribed downstream interfaces” belongs to a separate IP Multicast issue: an alternate upstream sends multicast on a path different from the router's route back to the source, causing RPF failures. It does not explain the condition tested here.

Question 649

Which suggested shortcut would be especially unsafe for this exact situation? An EVPN-VXLAN frame is dropped over a path where the IP underlay MTU was sized only for unencapsulated Ethernet payloads.

  1. Keep route-type purpose and acceptance checks in EVPN troubleshooting runbooks.
  2. Assume an Ethernet payload that fits a non-VXLAN path always fits once the VXLAN overhead is added.
  3. Audit ESI consistency and platform-supported multihoming mode across paired leafs.
  4. Test multihoming election and per-VLAN failover after attaching new dual-homed devices.

Explanation

Correct Answer

B:

The tempting alternative fails because VXLAN adds encapsulation overhead, so underlay MTU must accommodate the intended overlay frame size. The supported action is to test larger encapsulated frames and align supported underlay and overlay MTUs without disabling unrelated protections.

Incorrect Answers

A:

That prevention measure relates to a fabric advertises Type 3 routes and claims this proves specific remote host MACs are reachable.; it is not the unsafe shortcut described here.

C:

That prevention measure relates to a multihomed CE is attached to two leafs but one leaf advertises a different ESI, preventing expected redundancy behavior.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to a dual-attached Ethernet segment experiences persistent duplicates during link recovery because multihoming election or ESI state differs.; it is not the unsafe shortcut described here.

Question 650

Which suggested shortcut would be especially unsafe for this exact situation? A low-latency queue is correctly classified but voice delays because its egress scheduler map is absent from the trunk.

  1. Differentiate ingress policing from egress shaping when designing bandwidth controls.
  2. Create a scheduler definition in configuration but never bind the scheduler map to egress interfaces.
  3. Test marking, PLP assignment and drop policy together rather than checking only DSCP fields.
  4. Keep a documented forwarding-class inventory and test default mappings after service changes.

Explanation

Correct Answer

B:

The tempting alternative fails because egress scheduling requires the intended schedulers and their mapping to be applied on the outgoing interface. The supported action is to associate the approved scheduler map with the correct egress interface and confirm class queue counters.

Incorrect Answers

A:

That prevention measure relates to a guest network should be rate-limited at ingress, but engineers configure only an egress shaper on the uplink.; it is not the unsafe shortcut described here.

C:

That prevention measure relates to a business wants out-of-profile marked traffic to drop earlier than in-profile traffic within one forwarding class.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to a forwarding-class configuration sends critical routing packets to a queue used for bulk backups and adjacency stability degrades under load.; it is not the unsafe shortcut described here.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.