Juniper JN0-650 Exam Dumps, Practice Test Questions

100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Juniper JN0-650  Premium File
$54.99
$49.99

JN0-650 Premium File

  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

JN0-650 Premium File

Juniper JN0-650  Premium File
  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$54.99
$49.99

Juniper JN0-650 Practice Test 63

Question 620

To prevent recurrence of this precise networking failure, which practice should be adopted? An EAP-compliant endpoint authenticates while the required policy attribute is absent or ignored in switch port authorization.

  1. Test captive-portal redirects, session expiry and post-login VLAN access in guest-network acceptance.
  2. Verify RADIUS attribute handling and model/release feature support before rolling out dynamic assignment.
  3. Track hardware, software edition and port family when standardizing access policies.
  4. Test multi-method paths including success, reject and timeout cases before deployment.

Explanation

Correct Answer

B:

Verify RADIUS attribute handling and model/release feature support before rolling out dynamic assignment. This guards against authentication success and postauthentication VLAN/policy assignment are separate stages whose feature support may vary.

Incorrect Answers

A:

“Test captive-portal redirects, session expiry and post-login VLAN access in guest-network acceptance” belongs to a separate Layer 2 Authentication and Access Control issue: a visitor portal redirects browser traffic but never releases the user to the approved network after authentication. It does not explain the condition tested here.

C:

“Track hardware, software edition and port family when standardizing access policies” belongs to a separate Layer 2 Authentication and Access Control issue: an engineer copies legacy 802.1X fallback settings to a platform whose supported feature matrix excludes them. It does not explain the condition tested here.

D:

“Test multi-method paths including success, reject and timeout cases before deployment” belongs to a separate Layer 2 Authentication and Access Control issue: two authentication methods are enabled on a shared switch port but fallback ordering bypasses a successful 802.1X result. It does not explain the condition tested here.

Question 621

The team believes it has resolved this Junos issue: A branch receives two external paths with different metric-type assumptions after a policy change and prefers the wrong exit. Which observation best verifies the specific intended result?

  1. Neighbor states and DR/BDR assignments match the approved design following a managed election.
  2. No router-ID collision appears and OSPF paths stabilize with expected next hops.
  3. The preferred primary route wins when healthy and the backup becomes active on a controlled failure.
  4. An OSPFv3 neighbor forms and approved IPv6 prefixes appear in inet6.0.

Explanation

Correct Answer

C:

The preferred primary route wins when healthy and the backup becomes active on a controlled failure. This checks the relevant result after review external metric type and value at the originator, then apply the documented traffic-engineering policy.

Incorrect Answers

A:

“Neighbor states and DR/BDR assignments match the approved design following a managed election” belongs to a separate Interior Gateway Protocols (IGPs) issue: an aggregation broadcast VLAN has a DR/BDR placement that conflicts with the approved design after a maintenance reboot. It does not explain the condition tested here.

B:

“No router-ID collision appears and OSPF paths stabilize with expected next hops” belongs to a separate Interior Gateway Protocols (IGPs) issue: two newly deployed distribution switches report identical OSPF router IDs, causing inconsistent LSAs in the area. It does not explain the condition tested here.

D:

“An OSPFv3 neighbor forms and approved IPv6 prefixes appear in inet6.0” belongs to a separate Interior Gateway Protocols (IGPs) issue: a new IPv6 peering uses OSPFv3 on a retired VLAN unit rather than the active routed transit interface. It does not explain the condition tested here.

Question 622

A network change is required for the following specific situation: Guest users on an EX switch see no captive login page because browser HTTP redirects are not being applied on the intended VLAN. Which corrective action is most appropriate?

  1. Inspect switch authenticator state and RADIUS reachability and identity settings, then repair the approved server configuration.
  2. Inspect packet exchange and classify the endpoint before selecting a supported fallback method.
  3. Check returned RADIUS attributes and supported platform software, then enforce a valid authorization assignment.
  4. Inspect switch captive portal attachment, redirect reachability and completion flow for a test guest.

Explanation

Correct Answer

D:

Captive portal requires a supported browser interception and authentication-to-authorization sequence. Verify this by checking that the user sees a valid login prompt and receives only the approved post-login policy.

Incorrect Answers

A:

“Inspect switch authenticator state and RADIUS reachability and identity settings, then repair the approved server configuration” belongs to a separate Layer 2 Authentication and Access Control issue: a campus access interface keeps a compliant supplicant blocked while EAP requests never reach the expected authentication backend. It does not explain the condition tested here.

B:

“Inspect packet exchange and classify the endpoint before selecting a supported fallback method” belongs to a separate Layer 2 Authentication and Access Control issue: a switch logs EAP timeout while the endpoint has no 802.1X supplicant, yet the operator rotates valid RADIUS passwords repeatedly. It does not explain the condition tested here.

C:

“Check returned RADIUS attributes and supported platform software, then enforce a valid authorization assignment” belongs to a separate Layer 2 Authentication and Access Control issue: a switch receives successful RADIUS Access-Accept but the user still lands in an unexpected VLAN because the dynamic assignment is not supported on that platform. It does not explain the condition tested here.

Question 623

For this case, select TWO complementary measures or outcome checks that directly resolve the problem: OSPFv3 peering comes up but the desired IPv6 loopback is not in the routing database after a rollout.

  1. Disable the MTU check indefinitely without identifying why adjacent links differ.
  2. Set a blanket export accept action and rely on other routers to ignore sensitive prefixes.
  3. Restart the entire OSPFv2 process and assume this fixes a missing OSPFv3 loopback.
  4. The remote inet6.0 table learns the intended loopback and reachability testing succeeds.
  5. Inspect IPv6 interface addresses and OSPFv3 interface participation, then add the intended loopback advertisement within policy.

Explanation

Correct Answers

D:

The remote inet6.0 table learns the intended loopback and reachability testing succeeds. The specific steps required are to inspect IPv6 interface addresses and OSPFv3 interface participation, then add the intended loopback advertisement within policy.

E:

Inspect IPv6 interface addresses and OSPFv3 interface participation, then add the intended loopback advertisement within policy. This addresses the dependency that an established OSPFv3 neighbor does not prove every desired IPv6 interface prefix is included in the protocol topology.

Incorrect Answers

A:

“Disable the MTU check indefinitely without identifying why adjacent links differ” is an unsafe response to a different problem: a core-router replacement leaves an OSPF adjacency stuck exchanging database descriptions, while the two ends have different Layer 3 MTUs. It is not a valid fix here.

B:

“Set a blanket export accept action and rely on other routers to ignore sensitive prefixes” is an unsafe response to a different problem: a redistribution policy injects every static route into OSPF, including a maintenance-only prefix that should stay local. It is not a valid fix here.

C:

“Restart the entire OSPFv2 process and assume this fixes a missing OSPFv3 loopback” does not address an established OSPFv3 neighbor does not prove every desired IPv6 interface prefix is included in the protocol topology.

Question 624

For this case, select TWO complementary measures or outcome checks that directly resolve the problem: A route with a permissive policy term is accepted before a later deny term can block it.

  1. Put specific deny conditions before broad acceptance, and test the policy with representative routes.
  2. Keep restarting the established BGP session without evaluating import-policy filtering.
  3. The unauthorized route is rejected while intended export cases still match the proper terms.
  4. Add a second BGP neighbor and assume the forwarding table automatically load-balances every route.
  5. Append an extra deny at the end and assume it overrides a prior terminal accept.

Explanation

Correct Answers

A:

Put specific deny conditions before broad acceptance, and test the policy with representative routes. This addresses the dependency that routing-policy term order and terminal actions determine whether later conditions are evaluated.

C:

The unauthorized route is rejected while intended export cases still match the proper terms. The specific steps required are to put specific deny conditions before broad acceptance, and test the policy with representative routes.

Incorrect Answers

B:

“Keep restarting the established BGP session without evaluating import-policy filtering” is an unsafe response to a different problem: a remote prefix appears in incoming BGP updates yet never becomes active after a new route policy was applied. It is not a valid fix here.

D:

“Add a second BGP neighbor and assume the forwarding table automatically load-balances every route” is an unsafe response to a different problem: equal candidate BGP routes are visible but no multipath forwarding entry is installed because eligibility or policy differs. It is not a valid fix here.

E:

“Append an extra deny at the end and assume it overrides a prior terminal accept” does not address routing-policy term order and terminal actions determine whether later conditions are evaluated.

Question 625

A network change is required for the following specific situation: A credential-rejected user is sent to the guest VLAN even though the planned design reserves guest VLAN for silent non-supplicants. Which corrective action is most appropriate?

  1. Assign the authenticated device to the authorized restricted network profile and verify effective VLAN/filter.
  2. Inspect packet exchange and classify the endpoint before selecting a supported fallback method.
  3. Check authentication result classification and map the rejected user to an appropriate deny or reject response.
  4. Inspect switch authenticator state and RADIUS reachability and identity settings, then repair the approved server configuration.

Explanation

Correct Answer

C:

Guest, server-reject and server-fail outcomes represent different causes and require distinct supported policies. Verify this by checking that a nonresponding guest gets its intended limited VLAN while invalid credentials never receive guest privilege.

Incorrect Answers

A:

“Assign the authenticated device to the authorized restricted network profile and verify effective VLAN/filter” belongs to a separate Layer 2 Authentication and Access Control issue: a legacy printer can join after MAC authentication yet is allowed to reach sensitive management segments. It does not explain the condition tested here.

B:

“Inspect packet exchange and classify the endpoint before selecting a supported fallback method” belongs to a separate Layer 2 Authentication and Access Control issue: a RADIUS server reports no Access-Request for a silent legacy terminal, while switch timers show no EAP response. It does not explain the condition tested here.

D:

“Inspect switch authenticator state and RADIUS reachability and identity settings, then repair the approved server configuration” belongs to a separate Layer 2 Authentication and Access Control issue: a campus access interface keeps a compliant supplicant blocked while EAP requests never reach the expected authentication backend. It does not explain the condition tested here.

Question 626

The team believes it has resolved this Junos issue: An access port is placed in single-supplicant mode but a desk phone and PC must authenticate separately behind the same port. Which observation best verifies the specific intended result?

  1. Only the inventoried device has the expected limited connectivity; rogue or unknown hardware is denied.
  2. Validation shows only supported options in use and the intended access-denial/fallback behavior.
  3. Both intended endpoints receive their authorized VLAN/policy without permitting unapproved devices.
  4. The user sees a valid login prompt and receives only the approved post-login policy.

Explanation

Correct Answer

C:

Both intended endpoints receive their authorized VLAN/policy without permitting unapproved devices. This checks the relevant result after select a supported multi-supplicant or appropriate phone/PC access mode and test per-device policies.

Incorrect Answers

A:

“Only the inventoried device has the expected limited connectivity; rogue or unknown hardware is denied” belongs to a separate Layer 2 Authentication and Access Control issue: a MAC RADIUS device changes its network adapter and can no longer authenticate because its registered identifier is stale. It does not explain the condition tested here.

B:

“Validation shows only supported options in use and the intended access-denial/fallback behavior” belongs to a separate Layer 2 Authentication and Access Control issue: an access switch is moved to Junos OS Evolved but the team assumes every earlier guest-VLAN feature still exists on L2 802.1X interfaces. It does not explain the condition tested here.

D:

“The user sees a valid login prompt and receives only the approved post-login policy” belongs to a separate Layer 2 Authentication and Access Control issue: guest users on an EX switch see no captive login page because browser HTTP redirects are not being applied on the intended VLAN. It does not explain the condition tested here.

Question 627

Which suggested shortcut would be especially unsafe for this exact situation? A receiver domain requires discovery of sources known behind another RP, yet inter-RP source information exchange is absent.

  1. Measure receiver interest and multicast forwarding state before scaling new one-to-many services.
  2. Keep an approved multicast group allocation and test boundary enforcement after routing changes.
  3. Check multicast and unicast topology alignment whenever routing paths or metrics change.
  4. Assume a working unicast BGP session automatically exchanges multicast MSDP source-active messages.

Explanation

Correct Answer

D:

The tempting alternative fails because MSDP is used in applicable ASM inter-RP designs to exchange active-source information between rendezvous points. The supported action is to inspect MSDP peer state and source-active information, then configure the permitted peer relationships.

Incorrect Answers

A:

That prevention measure relates to a trading-data sender needs to serve many local subscribers, but each listener receives its own redundant copy over the backbone.; it is not the unsafe shortcut described here.

B:

That prevention measure relates to a laboratory's multicast test group leaks to the corporate backbone despite a requirement to keep it within the lab.; it is not the unsafe shortcut described here.

C:

That prevention measure relates to multicast packets arrive on the wrong uplink after unicast routing changes and are dropped by the campus core.; it is not the unsafe shortcut described here.

Question 628

A Junos enterprise team investigates this incident: A service provider must carry multiple customer VLAN IDs transparently over one metro Ethernet handoff. Which technical explanation most directly identifies the cause or design principle?

  1. Spanning-tree edge-port assumptions are intended for non-switching endpoints, not redundant bridging connections.
  2. Overbroad match conditions can cause unauthorized VLAN steering and affect both security and reachability.
  3. A private VLAN community allows permitted communication within its community; isolated behavior is stricter.
  4. Q-in-Q encapsulation can place a provider outer tag around customer VLAN tags to isolate transport context.

Explanation

Correct Answer

D:

Q-in-Q encapsulation can place a provider outer tag around customer VLAN tags to isolate transport context. The appropriate response is to design supported stacked VLAN tagging and verify S-tag/C-tag placement at the correct ingress and egress.

Incorrect Answers

A:

“Spanning-tree edge-port assumptions are intended for non-switching endpoints, not redundant bridging connections” belongs to a separate Ethernet Switching and Spanning Tree issue: a redundant L2 topology creates a broadcast storm after an edge port connected to another switch is treated as an endpoint. It does not explain the condition tested here.

B:

“Overbroad match conditions can cause unauthorized VLAN steering and affect both security and reachability” belongs to a separate Ethernet Switching and Spanning Tree issue: a filter-based VLAN security design uses a rule that catches too many packets and steers legitimate devices into quarantine. It does not explain the condition tested here.

C:

“A private VLAN community allows permitted communication within its community; isolated behavior is stricter” belongs to a separate Ethernet Switching and Spanning Tree issue: members of the same trusted workgroup are accidentally placed in isolated rather than community PVLAN ports and lose peer communication. It does not explain the condition tested here.

Question 629

For this case, select TWO complementary measures or outcome checks that directly resolve the problem: A service provider must carry multiple customer VLAN IDs transparently over one metro Ethernet handoff.

  1. Design supported stacked VLAN tagging and verify S-tag/C-tag placement at the correct ingress and egress.
  2. Two customers can use overlapping inner VLAN numbers without traffic mixing on the transport.
  3. Remove customer inner VLAN tags at entry and assume overlapping customer IDs remain isolated.
  4. Adjust Ethernet cable speed and expect different MSTP region digests to converge automatically.
  5. Create an independent VSTP instance for every VLAN without checking platform scaling limits.

Explanation

Correct Answers

A:

Design supported stacked VLAN tagging and verify S-tag/C-tag placement at the correct ingress and egress. This addresses the dependency that Q-in-Q encapsulation can place a provider outer tag around customer VLAN tags to isolate transport context.

B:

Two customers can use overlapping inner VLAN numbers without traffic mixing on the transport. The specific steps required are to design supported stacked VLAN tagging and verify S-tag/C-tag placement at the correct ingress and egress.

Incorrect Answers

C:

“Remove customer inner VLAN tags at entry and assume overlapping customer IDs remain isolated” does not address Q-in-Q encapsulation can place a provider outer tag around customer VLAN tags to isolate transport context.

D:

“Adjust Ethernet cable speed and expect different MSTP region digests to converge automatically” is an unsafe response to a different problem: two adjacent MSTP switches show different region digests after one has a different VLAN-to-instance map. It is not a valid fix here.

E:

“Create an independent VSTP instance for every VLAN without checking platform scaling limits” is an unsafe response to a different problem: a large campus places hundreds of VLANs in separate spanning-tree instances and reaches scale or CPU limits. It is not a valid fix here.

Question 630

A network change is required for the following specific situation: An enterprise chooses a different BGP exit after import policy assigns a higher local preference to the backup path. Which corrective action is most appropriate?

  1. Compare BGP best-path and multipath eligibility conditions, then enable approved multipath behavior and validate forwarding.
  2. Check the advertised AS sequence and correct the peering or routing design instead of bypassing loop checks.
  3. Inspect per-route local preferences and import policy; set the intended exit's LOCAL_PREF consistently.
  4. Inspect active-route selection and the advertise-inactive configuration; keep it only if the external requirement justifies it.

Explanation

Correct Answer

C:

BGP typically prefers a larger LOCAL_PREF among otherwise eligible candidates before later path-selection tie breakers. Verify this by checking that the selected BGP route reflects the intended higher LOCAL_PREF, and traceroute follows the approved exit.

Incorrect Answers

A:

“Compare BGP best-path and multipath eligibility conditions, then enable approved multipath behavior and validate forwarding” belongs to a separate Border Gateway Protocol (BGP) issue: two eBGP sessions over different transports are expected to provide ECMP but only one forwarding next hop appears. It does not explain the condition tested here.

B:

“Check the advertised AS sequence and correct the peering or routing design instead of bypassing loop checks” belongs to a separate Border Gateway Protocol (BGP) issue: the local AS appears in a received external BGP AS_PATH and the route is rejected despite valid prefix reachability. It does not explain the condition tested here.

D:

“Inspect active-route selection and the advertise-inactive configuration; keep it only if the external requirement justifies it” belongs to a separate Border Gateway Protocol (BGP) issue: an engineer adds advertise-inactive and downstream peers begin receiving a BGP route that loses to an OSPF route locally. It does not explain the condition tested here.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.