100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 760
The team believes it has resolved this Junos issue: Two newly deployed distribution switches report identical OSPF router IDs, causing inconsistent LSAs in the area. Which observation best verifies the specific intended result?
- The remote inet6.0 table learns the intended loopback and reachability testing succeeds.
- No router-ID collision appears and OSPF paths stabilize with expected next hops.
- An OSPFv3 neighbor forms and approved IPv6 prefixes appear in inet6.0.
- The preferred primary route wins when healthy and the backup becomes active on a controlled failure.
Explanation
Correct Answer
B:No router-ID collision appears and OSPF paths stabilize with expected next hops. This checks the relevant result after assign unique stable router IDs, confirm interfaces, and recheck adjacency and LSDB after controlled reconvergence.
Incorrect Answers
A:“The remote inet6.0 table learns the intended loopback and reachability testing succeeds” belongs to a separate Interior Gateway Protocols (IGPs) issue: OSPFv3 peering comes up but the desired IPv6 loopback is not in the routing database after a rollout. It does not explain the condition tested here.
C:“An OSPFv3 neighbor forms and approved IPv6 prefixes appear in inet6.0” belongs to a separate Interior Gateway Protocols (IGPs) issue: an IPv6-only branch has OSPFv3 Hellos on the wrong logical unit after interface renumbering, so no IPv6 routes appear. It does not explain the condition tested here.
D:“The preferred primary route wins when healthy and the backup becomes active on a controlled failure” belongs to a separate Interior Gateway Protocols (IGPs) issue: a branch receives two external paths with different metric-type assumptions after a policy change and prefers the wrong exit. It does not explain the condition tested here.
Question 761
The team believes it has resolved this Junos issue: A phone's LLDP-negotiated power demand exceeds its access port's allocated PoE limit and it repeatedly restarts. Which observation best verifies the specific intended result?
- The device stays powered during peak consumption and Junos reports no power-denial events.
- The handset learns the authorized voice VLAN and traffic is tagged and prioritized according to design.
- The phone receives voice service on its tagged VLAN and the PC remains on its separate data VLAN.
- The phone receives stable negotiated power and the chassis stays within its supported budget under peak load.
Explanation
Correct Answer
A:The device stays powered during peak consumption and Junos reports no power-denial events. This checks the relevant result after inspect PoE class, per-port priority and available chassis budget, and move to a supported powered port if needed.
Incorrect Answers
B:“The handset learns the authorized voice VLAN and traffic is tagged and prioritized according to design” belongs to a separate IP Telephony Features issue: a newly deployed IP phone joins the data network because the switch does not advertise the intended voice VLAN through LLDP-MED. It does not explain the condition tested here.
C:“The phone receives voice service on its tagged VLAN and the PC remains on its separate data VLAN” belongs to a separate IP Telephony Features issue: a phone-with-PC desk deployment lets the PC reach data services while the tagged voice stream is dropped by VLAN membership. It does not explain the condition tested here.
D:“The phone receives stable negotiated power and the chassis stays within its supported budget under peak load” instead concerns another network scenario: A voice handset fails to boot on an EX switch port after new cameras consume the remaining PoE budget. It does not address the requirement here.
Question 762
The team believes it has resolved this Junos issue: A network uses one VLAN-wide topology but wants two forwarding trees for different groups without an instance for every VLAN. Which observation best verifies the specific intended result?
- The retired VLAN disappears from unintended trunks and valid registered VLANs remain reachable.
- The required VLAN groups follow their designated MSTI paths without per-VLAN instance explosion.
- Only the intended endpoint class is moved while nonmatching hosts retain correct access.
- Community members can communicate as intended while cross-community access remains blocked.
Explanation
Correct Answer
B:The required VLAN groups follow their designated MSTI paths without per-VLAN instance explosion. This checks the relevant result after create an approved MSTP region and VLAN-to-instance mapping, then verify root and port role behavior.
Incorrect Answers
A:“The retired VLAN disappears from unintended trunks and valid registered VLANs remain reachable” belongs to a separate Ethernet Switching and Spanning Tree issue: a dynamic VLAN is removed from one edge but stale MVRP registration keeps an unused VLAN active downstream. It does not explain the condition tested here.
C:“Only the intended endpoint class is moved while nonmatching hosts retain correct access” belongs to a separate Ethernet Switching and Spanning Tree issue: a filter-based VLAN security design uses a rule that catches too many packets and steers legitimate devices into quarantine. It does not explain the condition tested here.
D:“Community members can communicate as intended while cross-community access remains blocked” belongs to a separate Ethernet Switching and Spanning Tree issue: members of the same trusted workgroup are accidentally placed in isolated rather than community PVLAN ports and lose peer communication. It does not explain the condition tested here.
Question 763
To prevent recurrence of this precise networking failure, which practice should be adopted? A switch receives successful RADIUS Access-Accept but the user still lands in an unexpected VLAN because the dynamic assignment is not supported on that platform.
- Review authorization policies for MAC endpoints against a least-privilege access matrix.
- Verify RADIUS attribute handling and model/release feature support before rolling out dynamic assignment.
- Track hardware, software edition and port family when standardizing access policies.
- Test captive-portal redirects, session expiry and post-login VLAN access in guest-network acceptance.
Explanation
Correct Answer
B:Verify RADIUS attribute handling and model/release feature support before rolling out dynamic assignment. This guards against authentication success and postauthentication VLAN/policy assignment are separate stages whose feature support may vary.
Incorrect Answers
A:“Review authorization policies for MAC endpoints against a least-privilege access matrix” belongs to a separate Layer 2 Authentication and Access Control issue: a legacy printer can join after MAC authentication yet is allowed to reach sensitive management segments. It does not explain the condition tested here.
C:“Track hardware, software edition and port family when standardizing access policies” belongs to a separate Layer 2 Authentication and Access Control issue: an engineer copies legacy 802.1X fallback settings to a platform whose supported feature matrix excludes them. It does not explain the condition tested here.
D:“Test captive-portal redirects, session expiry and post-login VLAN access in guest-network acceptance” belongs to a separate Layer 2 Authentication and Access Control issue: guest users on an EX switch see no captive login page because browser HTTP redirects are not being applied on the intended VLAN. It does not explain the condition tested here.
Question 764
A Junos enterprise team investigates this incident: A campus router's BGP IPv6 session is Established yet peers advertise only inet unicast family routes. Which technical explanation most directly identifies the cause or design principle?
- BGP address-family negotiation controls which IPv4 or IPv6 NLRI can be exchanged independently of session state.
- The default BGP AS-path loop check rejects routes containing the local autonomous system to prevent loops.
- A BGP route rejected or hidden by import policy can be absent from active forwarding despite a healthy peer session.
- MED has lower precedence than LOCAL_PREF and AS-path in common BGP best-path selection and must be compared under supported conditions.
Explanation
Correct Answer
A:BGP address-family negotiation controls which IPv4 or IPv6 NLRI can be exchanged independently of session state. The appropriate response is to enable the intended inet6 family consistently on eligible BGP peers and verify route policy and inet6.0.
Incorrect Answers
B:“The default BGP AS-path loop check rejects routes containing the local autonomous system to prevent loops” belongs to a separate Border Gateway Protocol (BGP) issue: the local AS appears in a received external BGP AS_PATH and the route is rejected despite valid prefix reachability. It does not explain the condition tested here.
C:“A BGP route rejected or hidden by import policy can be absent from active forwarding despite a healthy peer session” belongs to a separate Border Gateway Protocol (BGP) issue: a Junos route is hidden by import policy, but the team troubleshoots only local physical interfaces. It does not explain the condition tested here.
D:“MED has lower precedence than LOCAL_PREF and AS-path in common BGP best-path selection and must be compared under supported conditions” belongs to a separate Border Gateway Protocol (BGP) issue: two equal LOCAL_PREF and AS-path candidates remain tied until MED influences the choice under the applicable comparison rules. It does not explain the condition tested here.
Question 765
The team believes it has resolved this Junos issue: A shared Ethernet segment loses its fast convergence properties after an ESI-LAG peer receives an inconsistent configuration. Which observation best verifies the specific intended result?
- The current MAC location is learned and traffic reaches the moved endpoint without persistent old-VTEP forwarding.
- The remote VTEP becomes reachable and encapsulated packets cross the fabric as intended.
- The expected MAC/IP binding is visible in Type 2 while multihoming and BUM state use their own route types.
- Both peers report a consistent Ethernet segment and failover preserves authorized connectivity.
Explanation
Correct Answer
D:Both peers report a consistent Ethernet segment and failover preserves authorized connectivity. This checks the relevant result after align the intended ESI and supported LAG mode, then inspect relevant EVPN Type 1 and Type 4 routes.
Incorrect Answers
A:“The current MAC location is learned and traffic reaches the moved endpoint without persistent old-VTEP forwarding” belongs to a separate EVPN issue: a new endpoint MAC is learned at a remote VTEP but never reaches the receiving leaf's EVPN control-plane table. It does not explain the condition tested here.
B:“The remote VTEP becomes reachable and encapsulated packets cross the fabric as intended” belongs to a separate EVPN issue: a VXLAN overlay's BGP EVPN routes are present, but the underlay cannot route to a remote VTEP loopback. It does not explain the condition tested here.
C:“The expected MAC/IP binding is visible in Type 2 while multihoming and BUM state use their own route types” belongs to a separate EVPN issue: a fabric advertises Type 3 routes and claims this proves specific remote host MACs are reachable. It does not explain the condition tested here.
Question 766
Which suggested shortcut would be especially unsafe for this exact situation? A branch link should pace scheduled traffic to a slower uplink yet the team only drops excess packets abruptly.
- Test marking, PLP assignment and drop policy together rather than checking only DSCP fields.
- Validate classifier, scheduler map and interface association as a complete CoS chain.
- Keep a documented forwarding-class inventory and test default mappings after service changes.
- Assume any policing rule provides the same paced, buffered behavior as egress shaping.
Explanation
Correct Answer
D:The tempting alternative fails because shaping buffers and schedules outgoing traffic to a rate, unlike policing which marks or discards traffic exceeding a contract. The supported action is to configure supported egress shaping at the bottleneck and verify throughput and queue behavior.
Incorrect Answers
A:That prevention measure relates to a business wants out-of-profile marked traffic to drop earlier than in-profile traffic within one forwarding class.; it is not the unsafe shortcut described here.
B:That prevention measure relates to a low-latency queue is correctly classified but voice delays because its egress scheduler map is absent from the trunk.; it is not the unsafe shortcut described here.
C:That prevention measure relates to a forwarding-class configuration sends critical routing packets to a queue used for bulk backups and adjacency stability degrades under load.; it is not the unsafe shortcut described here.
Question 767
Select THREE complementary corrective, verification, or preventive controls for this scenario: A campus mistakenly enables edge behavior on a switch-to-switch trunk and a loop appears when a backup link activates.
- Remove incorrect edge treatment, validate BPDU reception and restore loop-free port roles.
- Delete all VLANs from every trunk to clear one stale MVRP registration.
- Assume every endpoint supports stacked 802.1Q tags even when the customer ordered a single-tagged handoff.
- The redundant topology converges without sustained broadcast loops during link-failure testing.
- Audit edge classifications and apply appropriate BPDU protection on true client-facing ports.
- Make every switch-to-switch uplink an edge port to accelerate convergence.
Explanation
Correct Answers
A:Correction: Spanning-tree edge-port assumptions are intended for non-switching endpoints, not redundant bridging connections.
D:Confirmation: Remove incorrect edge treatment, validate BPDU reception and restore loop-free port roles.
E:Prevention of recurrence: Spanning-tree edge-port assumptions are intended for non-switching endpoints, not redundant bridging connections.
Incorrect Answers
B:“Delete all VLANs from every trunk to clear one stale MVRP registration” is an unsafe response to a different problem: a campus migration removes a VLAN at the source while a trunk continues advertising it unexpectedly. It is not a valid fix here.
C:“Assume every endpoint supports stacked 802.1Q tags even when the customer ordered a single-tagged handoff” is an unsafe response to a different problem: a Q-in-Q service works across transport but the far-end access handoff presents unexpected double tags. It is not a valid fix here.
F:“Make every switch-to-switch uplink an edge port to accelerate convergence” does not address spanning-tree edge-port assumptions are intended for non-switching endpoints, not redundant bridging connections.
Question 768
Which suggested shortcut would be especially unsafe for this exact situation? An aggregation broadcast VLAN has a DR/BDR placement that conflicts with the approved design after a maintenance reboot.
- Keep IPv4 and IPv6 routing verification separate for dual-stack maintenance.
- Verify both protocol RIB candidates and active next-hop selection in dual-stack change tests.
- Record both LSDB presence and local RIB installation in OSPF troubleshooting runbooks.
- Assume increasing OSPF priority immediately preempts an existing healthy DR on every device.
Explanation
Correct Answer
D:The tempting alternative fails because DR/BDR elections on OSPF broadcast networks affect LSA exchange and can be influenced by priority. The supported action is to inspect network type, interface priority and existing election state, then plan a controlled DR/BDR change.
Incorrect Answers
A:That prevention measure relates to an OSPFv3 adjacency on a dual-stack campus changes state because engineers treat IPv4 interface reachability as proof of IPv6 control-plane health.; it is not the unsafe shortcut described here.
B:That prevention measure relates to an IPv6 route learned through OSPFv3 is absent from the forwarding table because a more preferred static route covers the same prefix.; it is not the unsafe shortcut described here.
C:That prevention measure relates to an OSPF import policy hides external routes on one device while neighbors retain them, confusing the team reviewing reachability.; it is not the unsafe shortcut described here.
Question 769
Which suggested shortcut would be especially unsafe for this exact situation? A private VLAN isolated endpoint reaches the local gateway but cannot access a peer service that should be shared via a permitted promiscuous port.
- Document outer/inner VLAN roles and test tag stripping and preservation at service boundaries.
- Include MVRP adjacency and registration checks in trunk-change reviews.
- Disable private VLAN restrictions entirely as a shortcut to reach a single shared uplink service.
- Include packet-capture verification of S-tag and C-tag transformation in provider handoffs.
Explanation
Correct Answer
C:The tempting alternative fails because private VLAN communication depends on permitted mappings to promiscuous ports and permitted community or isolated roles. The supported action is to inspect the primary/secondary association to shared-service promiscuous ports, then correct only authorized connectivity.
Incorrect Answers
A:That prevention measure relates to a service provider must carry multiple customer VLAN IDs transparently over one metro Ethernet handoff.; it is not the unsafe shortcut described here.
B:That prevention measure relates to a new switch automatically discovers VLAN registrations on one trunk, but an intermediate trunk lacks MVRP participation and blocks the VLAN.; it is not the unsafe shortcut described here.
D:That prevention measure relates to customer traffic emerges with the provider service tag still attached and is rejected by an endpoint expecting ordinary Ethernet.; it is not the unsafe shortcut described here.
Question 770
A network change is required for the following specific situation: A core node shows a missing route while remote LSDBs include the corresponding external LSA after a local policy change. Which corrective action is most appropriate?
- Move OSPFv3 participation to the correct active interface and verify neighbor and IPv6 RIB state.
- Compare LSDB advertisements with local route policy and inet.0 state; correct the intended import filter.
- Inspect network type, interface priority and existing election state, then plan a controlled DR/BDR change.
- Verify the aggregate range, component prefixes and ABR advertisements, then correct the summary policy to the approved address plan.
Explanation
Correct Answer
B:Local import policy can affect installed route visibility independently of the remote origination of LSAs. Verify this by checking that the expected prefix becomes active locally while unwanted external prefixes remain filtered.
Incorrect Answers
A:“Move OSPFv3 participation to the correct active interface and verify neighbor and IPv6 RIB state” belongs to a separate Interior Gateway Protocols (IGPs) issue: a new IPv6 peering uses OSPFv3 on a retired VLAN unit rather than the active routed transit interface. It does not explain the condition tested here.
C:“Inspect network type, interface priority and existing election state, then plan a controlled DR/BDR change” belongs to a separate Interior Gateway Protocols (IGPs) issue: an aggregation broadcast VLAN has a DR/BDR placement that conflicts with the approved design after a maintenance reboot. It does not explain the condition tested here.
D:“Verify the aggregate range, component prefixes and ABR advertisements, then correct the summary policy to the approved address plan” belongs to a separate Interior Gateway Protocols (IGPs) issue: an ABR stops advertising a branch prefix into the backbone after an OSPF area-range summary is configured incorrectly. It does not explain the condition tested here.
Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests