Juniper JN0-650 Exam Dumps, Practice Test Questions

100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Juniper JN0-650  Premium File
$54.99
$49.99

JN0-650 Premium File

  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

JN0-650 Premium File

Juniper JN0-650  Premium File
  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$54.99
$49.99

Juniper JN0-650 Practice Test 79

Question 780

Which suggested shortcut would be especially unsafe for this exact situation? Members of the same trusted workgroup are accidentally placed in isolated rather than community PVLAN ports and lose peer communication.

  1. Make every tenant port promiscuous simply to restore one workgroup's access.
  2. Version-control MSTP name, revision and VLAN mapping as one change unit.
  3. Document outer/inner VLAN roles and test tag stripping and preservation at service boundaries.
  4. Track MSTP instance scale and maintain identical region parameters across participating switches.

Explanation

Correct Answer

A:

The tempting alternative fails because a private VLAN community allows permitted communication within its community; isolated behavior is stricter. The supported action is to map the trusted endpoints to the proper community secondary VLAN and keep other groups segregated.

Incorrect Answers

B:

That prevention measure relates to two adjacent MSTP switches show different region digests after one has a different VLAN-to-instance map.; it is not the unsafe shortcut described here.

C:

That prevention measure relates to a service provider must carry multiple customer VLAN IDs transparently over one metro Ethernet handoff.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to a network uses one VLAN-wide topology but wants two forwarding trees for different groups without an instance for every VLAN.; it is not the unsafe shortcut described here.

Question 781

Which suggested shortcut would be especially unsafe for this exact situation? A router's OSPF neighbor restarts repeatedly because duplicate router IDs were assigned to different routing nodes.

  1. Document expected external metrics and run primary/backup failover tests during policy changes.
  2. Test one allowed and one forbidden route against each export policy term before deployment.
  3. Include a checklist of advertised IPv6 service and loopback addresses in OSPFv3 acceptance.
  4. Raise interface OSPF costs without resolving the duplicated router IDs.

Explanation

Correct Answer

D:

The tempting alternative fails because OSPF identifies routers by unique router ID; collisions can destabilize LSDB and adjacency behavior. The supported action is to assign unique stable router IDs, confirm interfaces, and recheck adjacency and LSDB after controlled reconvergence.

Incorrect Answers

A:

That prevention measure relates to a branch receives two external paths with different metric-type assumptions after a policy change and prefers the wrong exit.; it is not the unsafe shortcut described here.

B:

That prevention measure relates to an OSPF export term filters routes based on the wrong protocol, so an intended static default is not originated.; it is not the unsafe shortcut described here.

C:

That prevention measure relates to a replacement router has IPv6 OSPFv3 adjacency yet does not advertise the loopback subnet required for monitoring.; it is not the unsafe shortcut described here.

Question 782

A Junos enterprise team investigates this incident: A switch with an unexpectedly low bridge priority becomes MSTP root and redirects aggregation traffic through an access closet. Which technical explanation most directly identifies the cause or design principle?

  1. Private VLAN isolated ports are designed to limit lateral L2 communication while still reaching the permitted promiscuous uplink.
  2. MVRP distributes VLAN registration information across participating links; a gap can stop propagation.
  3. Spanning-tree root choice and path costs govern forwarding paths; unplanned priority changes can alter traffic patterns.
  4. Private VLAN communication depends on permitted mappings to promiscuous ports and permitted community or isolated roles.

Explanation

Correct Answer

C:

Spanning-tree root choice and path costs govern forwarding paths; unplanned priority changes can alter traffic patterns. The appropriate response is to compare bridge priority, VLAN or MSTI root and port path costs against design; adjust deliberately.

Incorrect Answers

A:

“Private VLAN isolated ports are designed to limit lateral L2 communication while still reaching the permitted promiscuous uplink” belongs to a separate Ethernet Switching and Spanning Tree issue: a shared guest access VLAN allows two untrusted hotel-room ports to communicate directly, violating the isolation design. It does not explain the condition tested here.

B:

“MVRP distributes VLAN registration information across participating links; a gap can stop propagation” belongs to a separate Ethernet Switching and Spanning Tree issue: a new switch automatically discovers VLAN registrations on one trunk, but an intermediate trunk lacks MVRP participation and blocks the VLAN. It does not explain the condition tested here.

D:

“Private VLAN communication depends on permitted mappings to promiscuous ports and permitted community or isolated roles” belongs to a separate Ethernet Switching and Spanning Tree issue: a private VLAN isolated endpoint reaches the local gateway but cannot access a peer service that should be shared via a permitted promiscuous port. It does not explain the condition tested here.

Question 783

A network change is required for the following specific situation: A BGP export configuration has a broad first match so a specific downstream deny never evaluates the target prefix. Which corrective action is most appropriate?

  1. Inspect hidden-route reason, incoming attributes and import-policy decisions, then correct the authorized match.
  2. Put specific deny conditions before broad acceptance, and test the policy with representative routes.
  3. Inspect active-route selection and the advertise-inactive configuration; keep it only if the external requirement justifies it.
  4. Use precise route-filter match conditions and explicit rejection of unauthorized more-specific routes.

Explanation

Correct Answer

B:

Routing-policy term order and terminal actions determine whether later conditions are evaluated. Verify this by checking that the unauthorized route is rejected while intended export cases still match the proper terms.

Incorrect Answers

A:

“Inspect hidden-route reason, incoming attributes and import-policy decisions, then correct the authorized match” belongs to a separate Border Gateway Protocol (BGP) issue: a Junos route is hidden by import policy, but the team troubleshoots only local physical interfaces. It does not explain the condition tested here.

C:

“Inspect active-route selection and the advertise-inactive configuration; keep it only if the external requirement justifies it” belongs to a separate Border Gateway Protocol (BGP) issue: a BGP export policy advertises a prefix that exists only as an inactive local candidate, despite an expectation of default active-only behavior. It does not explain the condition tested here.

D:

“Use precise route-filter match conditions and explicit rejection of unauthorized more-specific routes” belongs to a separate Border Gateway Protocol (BGP) issue: an eBGP import policy unexpectedly accepts more-specific prefixes outside the approved customer allocation. It does not explain the condition tested here.

Question 784

The team believes it has resolved this Junos issue: A route-reflector topology loses an iBGP-advertised prefix because clients are not configured under the intended reflector cluster. Which observation best verifies the specific intended result?

  1. The downstream client learns approved prefixes and cluster-loop checks remain operational.
  2. Positive and negative prefix tests traverse the expected policy terms and produce approved import/export outcomes.
  3. After policy correction, chosen path and attribute ordering match documented routing intent.
  4. The previously hidden BGP prefix resolves its next hop and becomes an eligible route.

Explanation

Correct Answer

A:

The downstream client learns approved prefixes and cluster-loop checks remain operational. This checks the relevant result after inspect reflector/client relationships and cluster behavior, then correct the intended route-reflector configuration.

Incorrect Answers

B:

“Positive and negative prefix tests traverse the expected policy terms and produce approved import/export outcomes” belongs to a separate Border Gateway Protocol (BGP) issue: a route policy lacks an explicit intended default action, and unmatched BGP prefixes behave differently than planned. It does not explain the condition tested here.

C:

“After policy correction, chosen path and attribute ordering match documented routing intent” belongs to a separate Border Gateway Protocol (BGP) issue: a router prefers a longer AS path when a higher LOCAL_PREF makes that route win, surprising the transit team. It does not explain the condition tested here.

D:

“The previously hidden BGP prefix resolves its next hop and becomes an eligible route” belongs to a separate Border Gateway Protocol (BGP) issue: an iBGP route is received from a reflector but hidden because its third-party next hop is unreachable in inet.0. It does not explain the condition tested here.

Question 785

For this case, select TWO complementary measures or outcome checks that directly resolve the problem: A phone-with-PC desk deployment lets the PC reach data services while the tagged voice stream is dropped by VLAN membership.

  1. Configure an approved voice VLAN on the port while keeping the PC data VLAN constrained.
  2. The phone receives voice service on its tagged VLAN and the PC remains on its separate data VLAN.
  3. Assume generic LLDP chassis identification alone announces the correct voice VLAN and QoS settings.
  4. Treat the old physical room value as correct because IP addressing did not change.
  5. Put the phone and PC on one unrestricted VLAN to avoid checking voice VLAN tagging.

Explanation

Correct Answers

A:

Configure an approved voice VLAN on the port while keeping the PC data VLAN constrained. This addresses the dependency that voice/data split depends on compatible VLAN membership, accepted 802.1Q tagging and endpoint network policy.

B:

The phone receives voice service on its tagged VLAN and the PC remains on its separate data VLAN. The specific steps required are to configure an approved voice VLAN on the port while keeping the PC data VLAN constrained.

Incorrect Answers

C:

“Assume generic LLDP chassis identification alone announces the correct voice VLAN and QoS settings” is an unsafe response to a different problem: a vendor handset discovers its neighbor using basic LLDP but does not learn the configured network policy for voice tagging. It is not a valid fix here.

D:

“Treat the old physical room value as correct because IP addressing did not change” is an unsafe response to a different problem: an IP phone uses the wrong location information for emergency response after a switch move. It is not a valid fix here.

E:

“Put the phone and PC on one unrestricted VLAN to avoid checking voice VLAN tagging” does not address voice/data split depends on compatible VLAN membership, accepted 802.1Q tagging and endpoint network policy.

Question 786

For this case, select TWO complementary measures or outcome checks that directly resolve the problem: An ABR stops advertising a branch prefix into the backbone after an OSPF area-range summary is configured incorrectly.

  1. The backbone receives the intended aggregate and routers can reach all included component subnets.
  2. Add a catch-all accept at the end of the policy to bypass the source-type error.
  3. Verify the aggregate range, component prefixes and ABR advertisements, then correct the summary policy to the approved address plan.
  4. Advertise an arbitrary wide aggregate that includes unrelated networks to make the missing route disappear.
  5. Set a blanket export accept action and rely on other routers to ignore sensitive prefixes.

Explanation

Correct Answers

A:

The backbone receives the intended aggregate and routers can reach all included component subnets. The specific steps required are to verify the aggregate range, component prefixes and ABR advertisements, then correct the summary policy to the approved address plan.

C:

Verify the aggregate range, component prefixes and ABR advertisements, then correct the summary policy to the approved address plan. This addresses the dependency that area summarization scope must correctly cover the intended component networks; the wrong range can suppress or misrepresent reachability.

Incorrect Answers

B:

“Add a catch-all accept at the end of the policy to bypass the source-type error” is an unsafe response to a different problem: an OSPF export term filters routes based on the wrong protocol, so an intended static default is not originated. It is not a valid fix here.

D:

“Advertise an arbitrary wide aggregate that includes unrelated networks to make the missing route disappear” does not address area summarization scope must correctly cover the intended component networks; the wrong range can suppress or misrepresent reachability.

E:

“Set a blanket export accept action and rely on other routers to ignore sensitive prefixes” is an unsafe response to a different problem: a redistribution policy injects every static route into OSPF, including a maintenance-only prefix that should stay local. It is not a valid fix here.

Question 787

The team believes it has resolved this Junos issue: A branch dual-transit design sees the higher-preference provider route win even though its AS path has more hops. Which observation best verifies the specific intended result?

  1. A loopback-to-loopback BGP session becomes Established and exchanges only permitted NLRI.
  2. The desired received prefix is accepted and active while intentionally blocked prefixes stay rejected.
  3. The IPv6 BGP route becomes eligible and forwards over an IPv6-resolvable next hop.
  4. After policy correction, chosen path and attribute ordering match documented routing intent.

Explanation

Correct Answer

D:

After policy correction, chosen path and attribute ordering match documented routing intent. This checks the relevant result after examine both attributes in the received route detail and update the explicit routing policy rather than guessing.

Incorrect Answers

A:

“A loopback-to-loopback BGP session becomes Established and exchanges only permitted NLRI” belongs to a separate Border Gateway Protocol (BGP) issue: a multihop eBGP peer uses loopback addresses but its session times out when directly connected assumptions remain. It does not explain the condition tested here.

B:

“The desired received prefix is accepted and active while intentionally blocked prefixes stay rejected” belongs to a separate Border Gateway Protocol (BGP) issue: a remote prefix appears in incoming BGP updates yet never becomes active after a new route policy was applied. It does not explain the condition tested here.

C:

“The IPv6 BGP route becomes eligible and forwards over an IPv6-resolvable next hop” belongs to a separate Border Gateway Protocol (BGP) issue: an IPv6 transit prefix is hidden because its next-hop address is absent from the correct IPv6 routing table. It does not explain the condition tested here.

Question 788

A network change is required for the following specific situation: A laboratory's multicast test group leaks to the corporate backbone despite a requirement to keep it within the lab. Which corrective action is most appropriate?

  1. Compare source-route preference with actual multicast ingress and restore a consistent authorized upstream path.
  2. Inspect MSDP peer state and source-active information, then configure the permitted peer relationships.
  3. Verify anycast RP address and supported source synchronization method across the participating RP nodes.
  4. Configure group-aware multicast routing policy and boundary filters at intended exits, then verify forwarding.

Explanation

Correct Answer

D:

Multicast administrative scoping must restrict eligible groups and outgoing boundaries; group addresses alone do not impose all policy. Verify this by checking that the specified groups remain within the approved scope while unrelated enterprise multicast flows continue.

Incorrect Answers

A:

“Compare source-route preference with actual multicast ingress and restore a consistent authorized upstream path” belongs to a separate IP Multicast issue: a redundant network changes the preferred route to the source while packets keep arriving on the other physical link. It does not explain the condition tested here.

B:

“Inspect MSDP peer state and source-active information, then configure the permitted peer relationships” belongs to a separate IP Multicast issue: a receiver domain requires discovery of sources known behind another RP, yet inter-RP source information exchange is absent. It does not explain the condition tested here.

C:

“Verify anycast RP address and supported source synchronization method across the participating RP nodes” belongs to a separate IP Multicast issue: an Anycast RP design uses two RP addresses that do not share the intended anycast identity, producing inconsistent joins. It does not explain the condition tested here.

Question 789

Select THREE complementary corrective, verification, or preventive controls for this scenario: A legacy interop design needs separate per-VLAN spanning-tree compatibility but all VLANs inherit one unsuitable tree.

  1. Test each critical VLAN's root bridge and forwarding path after VSTP updates.
  2. Treat ordinary VLAN membership as equivalent to isolation between every port inside that VLAN.
  3. Selected voice and data VLANs use the approved active links without loops.
  4. Assume setting one global RSTP root automatically produces independently chosen roots for every VSTP VLAN.
  5. Make every tenant port promiscuous simply to restore one workgroup's access.
  6. Inspect VSTP VLAN membership, root priority and port roles, then repair the intended per-VLAN root arrangement.

Explanation

Correct Answers

A:

Prevention of recurrence: VSTP provides per-VLAN spanning-tree behavior for compatibility and path control when the design and platform support it.

C:

Confirmation: Inspect VSTP VLAN membership, root priority and port roles, then repair the intended per-VLAN root arrangement.

F:

Correction: VSTP provides per-VLAN spanning-tree behavior for compatibility and path control when the design and platform support it.

Incorrect Answers

B:

“Treat ordinary VLAN membership as equivalent to isolation between every port inside that VLAN” is an unsafe response to a different problem: a shared guest access VLAN allows two untrusted hotel-room ports to communicate directly, violating the isolation design. It is not a valid fix here.

D:

“Assume setting one global RSTP root automatically produces independently chosen roots for every VSTP VLAN” does not address VSTP provides per-VLAN spanning-tree behavior for compatibility and path control when the design and platform support it.

E:

“Make every tenant port promiscuous simply to restore one workgroup's access” is an unsafe response to a different problem: members of the same trusted workgroup are accidentally placed in isolated rather than community PVLAN ports and lose peer communication. It is not a valid fix here.

Question 790

The team believes it has resolved this Junos issue: A PIM sparse-mode segment cannot maintain neighbor state because PIM is configured on the wrong routed interface. Which observation best verifies the specific intended result?

  1. Receivers subscribed to the intended (S,G) get traffic while nonselected sources cannot join that flow.
  2. The required PIM neighbors appear and downstream join state tracks active interested receivers.
  3. RPF counters and expected (S,G) forwarding stabilize after the route change.
  4. Only the specified source delivers data to receivers of the chosen SSM group.

Explanation

Correct Answer

B:

The required PIM neighbors appear and downstream join state tracks active interested receivers. This checks the relevant result after enable PIM on the approved routed VLAN interface and inspect neighbor and join state.

Incorrect Answers

A:

“Receivers subscribed to the intended (S,G) get traffic while nonselected sources cannot join that flow” belongs to a separate IP Multicast issue: a controlled one-source data feed requires group membership constrained by both source and group, not arbitrary senders. It does not explain the condition tested here.

C:

“RPF counters and expected (S,G) forwarding stabilize after the route change” belongs to a separate IP Multicast issue: a redundant network changes the preferred route to the source while packets keep arriving on the other physical link. It does not explain the condition tested here.

D:

“Only the specified source delivers data to receivers of the chosen SSM group” belongs to a separate IP Multicast issue: a streaming application expects a source-specific group to accept traffic from any origin, contrary to its (S,G) subscription. It does not explain the condition tested here.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.