100% Latest & Updated Microsoft AZ-700 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 180
A company needs to centrally define connectivity groups across dozens of VNets. During acceptance testing, a new VNet is not connected when added to the managed network group. Which underlying configuration problem best explains the symptom?
- The configuration was not deployed or its membership is incorrect
- DDoS protection scope or alert configuration is missing
- The platform subnet name or required sizing is incorrect
- Custom DNS configuration was not applied to the VM's resolver
Explanation
Correct Answer
A:The configuration was not deployed or its membership is incorrect explains the observed failure: a new VNet is not connected when added to the managed network group. Correct the design by using use Azure Virtual Network Manager connectivity configurations, implemented through create network groups and deploy a hub-and-spoke connectivity configuration.
Incorrect Answers
B:DDoS protection scope or alert configuration is missing. This is relevant when an early warning when its azure public endpoint is targeted by volumetric attacks. Here, the configuration was not deployed or its membership is incorrect.
C:The platform subnet name or required sizing is incorrect. This concerns a company expects several firewalls, gateways, and bastion services to use separate platform subnets. Here, the configuration was not deployed or its membership is incorrect.
D:Custom DNS configuration was not applied to the VM's resolver. This is relevant when a VNet uses an on-premises domain controller for DNS and a new vm still queries azure platform DNS. Here, the configuration was not deployed or its membership is incorrect.
Question 181
A hub NVA will inspect traffic forwarded between peered VNets. Which Azure networking design most directly satisfies this requirement?
- Publish the correct MX resource record in an Azure public DNS zone
- Enable forwarded traffic on the necessary peering connections and use correct routes
- Use a dedicated subnet delegated to the correct resource provider
- Place subnet outbound connections behind a NAT Gateway
Explanation
Correct Answer
B:Enable forwarded traffic on the necessary peering connections and use correct routes addresses the topology, access or delivery requirement in the scenario. Apply it by set Allow forwarded traffic as required and install UDRs toward the NVA; confirm by test a forwarded spoke-to-spoke flow and inspect the NVA session table.
Incorrect Answers
A:Publish the correct MX resource record in an Azure public DNS zone. This concerns direct mail to an externally hosted mail service. Instead, enable forwarded traffic on the necessary peering connections and use correct routes.
C:Use a dedicated subnet delegated to the correct resource provider. This concerns exclusive delegation. Instead, enable forwarded traffic on the necessary peering connections and use correct routes.
D:Place subnet outbound connections behind a NAT Gateway. This concerns egress IP consistency during VM scale-in and scale-out. Instead, enable forwarded traffic on the necessary peering connections and use correct routes.
Question 182
A hub NVA will inspect traffic forwarded between peered VNets. The architecture uses this design: Enable forwarded traffic on the necessary peering connections and use correct routes. Which configuration should the engineer apply to implement it?
- Create Route Server in its required dedicated subnet and set NVA BGP peer parameters
- Set Allow forwarded traffic as required and install UDRs toward the NVA
- Prepare a hub VNet CIDR plan that accounts for required service subnets
- Create GatewaySubnet and AzureBastionSubnet plus separate firewall subnet as required
Explanation
Correct Answer
B:Set Allow forwarded traffic as required and install UDRs toward the NVA is the operational configuration for enable forwarded traffic on the necessary peering connections and use correct routes. The acceptance test is to test a forwarded spoke-to-spoke flow and inspect the NVA session table.
Incorrect Answers
A:Create Route Server in its required dedicated subnet and set NVA BGP peer parameters is a concrete step for deploy azure route server and establish bgp peering with the nva. Here the selected design is enable forwarded traffic on the necessary peering connections and use correct routes, which instead requires set allow forwarded traffic as required and install udrs toward the nva.
C:Prepare a hub VNet CIDR plan that accounts for required service subnets is a concrete step for reserve address space for gateway, firewall, bastion and workload subnets before peering. Here the selected design is enable forwarded traffic on the necessary peering connections and use correct routes, which instead requires set allow forwarded traffic as required and install udrs toward the nva.
D:Create GatewaySubnet and AzureBastionSubnet plus separate firewall subnet as required is a concrete step for reserve correctly named, dedicated service subnets with adequate sizes. Here the selected design is enable forwarded traffic on the necessary peering connections and use correct routes, which instead requires set allow forwarded traffic as required and install udrs toward the nva.
Question 183
A hub NVA will inspect traffic forwarded between peered VNets. After the team applies this change—set Allow forwarded traffic as required and install UDRs toward the NVA—which validation best proves the intended result?
- Test a forwarded spoke-to-spoke flow and inspect the NVA session table
- Inspect guest resolver settings and query an AD-integrated name
- Take one resolver offline and test supported fallback behavior
- Inspect effective routes and packet path for the intended destination
Explanation
Correct Answer
A:Test a forwarded spoke-to-spoke flow and inspect the NVA session table directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether forwarded traffic is not permitted on the appropriate peering.
Incorrect Answers
B:Inspect guest resolver settings and query an AD-integrated name. This is relevant when a VNet uses an on-premises domain controller for DNS and a new vm still queries azure platform DNS. Instead, test a forwarded spoke-to-spoke flow and inspect the NVA session table.
C:Take one resolver offline and test supported fallback behavior. This concerns failover if one resolver is offline. Instead, test a forwarded spoke-to-spoke flow and inspect the NVA session table.
D:Inspect effective routes and packet path for the intended destination. This concerns using a specific next hop. Instead, test a forwarded spoke-to-spoke flow and inspect the NVA session table.
Question 184
A hub NVA will inspect traffic forwarded between peered VNets. During acceptance testing, direct peer connectivity works but NVA-forwarded packets are dropped. Which underlying configuration problem best explains the symptom?
- The private endpoint's DNS zone group or link is missing
- Forwarded traffic is not permitted on the appropriate peering
- IP planning permitted duplicate prefixes across regions
- Its subnet was omitted from the NAT Gateway association
Explanation
Correct Answer
B:Forwarded traffic is not permitted on the appropriate peering explains the observed failure: direct peer connectivity works but NVA-forwarded packets are dropped. Correct the design by using enable forwarded traffic on the necessary peering connections and use correct routes, implemented through set Allow forwarded traffic as required and install UDRs toward the NVA.
Incorrect Answers
A:The private endpoint's DNS zone group or link is missing. This concerns resolving to its private link address rather than a public endpoint. Here, forwarded traffic is not permitted on the appropriate peering.
C:IP planning permitted duplicate prefixes across regions. This concerns scale without manual ip conflicts. Here, forwarded traffic is not permitted on the appropriate peering.
D:Its subnet was omitted from the NAT Gateway association. This concerns outbound public ip assignment from a common address pool for multiple application tiers. Here, forwarded traffic is not permitted on the appropriate peering.
Question 185
A route table is created but its UDRs have no effect on an application VM. Which Azure networking design most directly satisfies this requirement?
- Create hub-spoke VNet peerings with UDRs through the hub inspection NVA
- Reserve correctly named, dedicated service subnets with adequate sizes
- Place the managed service into its required dedicated or delegated subnet
- Associate the route table with the VM's subnet
Explanation
Correct Answer
D:Associate the route table with the VM's subnet addresses the topology, access or delivery requirement in the scenario. Apply it by select the subnet in the route table Subnets association settings; confirm by review the VM NIC effective routes after the association.
Incorrect Answers
A:Create hub-spoke VNet peerings with UDRs through the hub inspection NVA. This concerns permit service chaining through a firewall shared by multiple spokes. Here, associate the route table with the VM's subnet.
B:Reserve correctly named, dedicated service subnets with adequate sizes. This concerns a company expects several firewalls, gateways, and Bastion services to use separate platform subnets. Here, associate the route table with the VM's subnet.
C:Place the managed service into its required dedicated or delegated subnet. This concerns retaining separation from general-purpose virtual machines. Here, associate the route table with the VM's subnet.
Question 186
A route table is created but its UDRs have no effect on an application VM. The architecture uses this design: Associate the route table with the VM's subnet. Which configuration should the engineer apply to implement it?
- Associate the configured NAT Gateway with both application subnets
- Route subscription Activity Log events to an approved Log Analytics workspace
- Apply an appropriate 0.0.0.0/0 UDR to the workload subnet with the inspection next hop
- Select the subnet in the route table Subnets association settings
Explanation
Correct Answer
D:Select the subnet in the route table Subnets association settings is the operational configuration for associate the route table with the vm's subnet. The acceptance test is to review the VM NIC effective routes after the association.
Incorrect Answers
A:Associate the configured NAT Gateway with both application subnets is a concrete step for attach outbound nat resources to each intended workload subnet. Here the selected design is associate the route table with the vm's subnet, which instead requires select the subnet in the route table subnets association settings.
B:Route subscription Activity Log events to an approved Log Analytics workspace is a concrete step for enable activity log and central diagnostic retention for network control-plane events. Here the selected design is associate the route table with the vm's subnet, which instead requires select the subnet in the route table subnets association settings.
C:Apply an appropriate 0.0.0.0/0 UDR to the workload subnet with the inspection next hop is a concrete step for configure forced tunneling through a virtual appliance or hybrid gateway. Here the selected design is associate the route table with the vm's subnet, which instead requires select the subnet in the route table subnets association settings.
Question 187
A route table is created but its UDRs have no effect on an application VM. After the team applies this change—select the subnet in the route table Subnets association settings—which validation best proves the intended result?
- Review network health trends and correlated alerts for the target window
- Inspect deployed effective routing configuration and sample packet flows
- Review the VM NIC effective routes after the association
- Check effective subnet attachment and route behavior for both NICs
Explanation
Correct Answer
C:Review the VM NIC effective routes after the association directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether the route table was never associated with the workload subnet.
Incorrect Answers
A:Review network health trends and correlated alerts for the target window. This concerns a time-window view of failed connections and network dependency health. Instead, review the VM NIC effective routes after the association.
B:Inspect deployed effective routing configuration and sample packet flows. This is relevant when a large region uses a central routing policy for many hub-spoke links. Instead, review the VM NIC effective routes after the association.
D:Check effective subnet attachment and route behavior for both NICs. This concerns separating nics for trusted and untrusted network segments. Instead, review the VM NIC effective routes after the association.
Question 188
A route table is created but its UDRs have no effect on an application VM. During acceptance testing, configured UDRs are absent from the NIC's effective route list. Which underlying configuration problem best explains the symptom?
- The route table was never associated with the workload subnet
- The subnet is undersized after Azure-reserved IP addresses
- The hub allocation failed to reserve adequate gateway subnet space
- The platform subnet name or required sizing is incorrect
Explanation
Correct Answer
A:The route table was never associated with the workload subnet explains the observed failure: configured UDRs are absent from the NIC's effective route list. Correct the design by using associate the route table with the VM's subnet, implemented through select the subnet in the route table Subnets association settings.
Incorrect Answers
B:The subnet is undersized after Azure-reserved IP addresses. This concerns 70 usable private addresses for application vms within a larger VNet. Here, the route table was never associated with the workload subnet.
C:The hub allocation failed to reserve adequate gateway subnet space. This concerns route-aware service placement before defining the hub address blocks. Here, the route table was never associated with the workload subnet.
D:The platform subnet name or required sizing is incorrect. This concerns a company expects several firewalls, gateways, and bastion services to use separate platform subnets. Here, the route table was never associated with the workload subnet.
Question 189
A service needs scalable outbound connectivity from several subnets without public IPs on the VMs. Which TWO listed choices identify the suitable Azure design and the concrete configuration required to implement it? (Choose TWO.)
- Attach supported NIC IP configurations to the distinct workload subnets
- Use NAT Gateway rather than relying on implicit outbound access
- Attach NAT Gateway with explicit public IP resources to each eligible subnet
- Avoid attaching unnecessary public IPs to VM NICs and use subnet NAT Gateway
- Configure hub gateway transit and spoke use-remote-gateways peering options
Explanation
Correct Answers
B:Use NAT Gateway rather than relying on implicit outbound access addresses the topology, access or delivery requirement in the scenario. Apply it by attach NAT Gateway with explicit public IP resources to each eligible subnet; confirm by observe the expected static source IP on outbound TCP probes.
C:Attach NAT Gateway with explicit public IP resources to each eligible subnet is the operational configuration for use nat gateway rather than relying on implicit outbound access. The acceptance test is to observe the expected static source IP on outbound TCP probes.
Incorrect Answers
A:Attach supported NIC IP configurations to the distinct workload subnets is a concrete step for assign the appliance nics to valid, segregated subnets within one vnet. Here the selected design is use nat gateway rather than relying on implicit outbound access, which instead requires attach nat gateway with explicit public ip resources to each eligible subnet.
D:Avoid attaching unnecessary public IPs to VM NICs and use subnet NAT Gateway. This concerns private VM interfaces but only a central NAT resource exposed to the internet. Instead, use NAT Gateway rather than relying on implicit outbound access.
E:Configure hub gateway transit and spoke use-remote-gateways peering options. This concerns using the hub's VPN gateway to communicate with an on-premises network. Instead, use NAT Gateway rather than relying on implicit outbound access.
Question 190
A service needs scalable outbound connectivity from several subnets without public IPs on the VMs. The architecture uses this design: Use NAT Gateway rather than relying on implicit outbound access. Which configuration should the engineer apply to implement it?
- Attach supported NIC IP configurations to the distinct workload subnets
- Set the subnet delegation to the supported Microsoft service type
- Select the subnet in the route table Subnets association settings
- Attach NAT Gateway with explicit public IP resources to each eligible subnet
Explanation
Correct Answer
D:Attach NAT Gateway with explicit public IP resources to each eligible subnet is the operational configuration for use nat gateway rather than relying on implicit outbound access. The acceptance test is to observe the expected static source IP on outbound TCP probes.
Incorrect Answers
A:Attach supported NIC IP configurations to the distinct workload subnets is a concrete step for assign the appliance nics to valid, segregated subnets within one vnet. Here the selected design is use nat gateway rather than relying on implicit outbound access, which instead requires attach nat gateway with explicit public ip resources to each eligible subnet.
B:Set the subnet delegation to the supported Microsoft service type is a concrete step for use a dedicated subnet delegated to the correct resource provider. Here the selected design is use nat gateway rather than relying on implicit outbound access, which instead requires attach nat gateway with explicit public ip resources to each eligible subnet.
C:Select the subnet in the route table Subnets association settings is a concrete step for associate the route table with the vm's subnet. Here the selected design is use nat gateway rather than relying on implicit outbound access, which instead requires attach nat gateway with explicit public ip resources to each eligible subnet.
Designing and Implementing Microsoft Azure Networking Solutions (AZ-700) Practice Tests