100% Latest & Updated Microsoft AZ-700 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 190
A service needs scalable outbound connectivity from several subnets without public IPs on the VMs. The architecture uses this design: Use NAT Gateway rather than relying on implicit outbound access. Which configuration should the engineer apply to implement it?
- Attach supported NIC IP configurations to the distinct workload subnets
- Set the subnet delegation to the supported Microsoft service type
- Select the subnet in the route table Subnets association settings
- Attach NAT Gateway with explicit public IP resources to each eligible subnet
Explanation
Correct Answer
D:Attach NAT Gateway with explicit public IP resources to each eligible subnet is the operational configuration for use nat gateway rather than relying on implicit outbound access. The acceptance test is to observe the expected static source IP on outbound TCP probes.
Incorrect Answers
A:Attach supported NIC IP configurations to the distinct workload subnets is a concrete step for assign the appliance nics to valid, segregated subnets within one vnet. Here the selected design is use nat gateway rather than relying on implicit outbound access, which instead requires attach nat gateway with explicit public ip resources to each eligible subnet.
B:Set the subnet delegation to the supported Microsoft service type is a concrete step for use a dedicated subnet delegated to the correct resource provider. Here the selected design is use nat gateway rather than relying on implicit outbound access, which instead requires attach nat gateway with explicit public ip resources to each eligible subnet.
C:Select the subnet in the route table Subnets association settings is a concrete step for associate the route table with the vm's subnet. Here the selected design is use nat gateway rather than relying on implicit outbound access, which instead requires attach nat gateway with explicit public ip resources to each eligible subnet.
Question 191
A service needs scalable outbound connectivity from several subnets without public IPs on the VMs. After the team applies this change—attach NAT Gateway with explicit public IP resources to each eligible subnet—which validation best proves the intended result?
- Observe the expected static source IP on outbound TCP probes
- Compare longest-prefix selection against the destination and expected next hop
- Review listed resources against expected public ingress inventory
- Query both FQDNs externally and verify their expected targets
Explanation
Correct Answer
A:Observe the expected static source IP on outbound TCP probes directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether nAT Gateway association or public IP SNAT capacity is insufficient.
Incorrect Answers
B:Compare longest-prefix selection against the destination and expected next hop. This concerns finding which route an azure vm actually uses after peering and BGP advertisements. Instead, observe the expected static source IP on outbound TCP probes.
C:Review listed resources against expected public ingress inventory. This concerns inventory-based queries over exposed public network resources. Instead, observe the expected static source IP on outbound TCP probes.
D:Query both FQDNs externally and verify their expected targets. This concerns being reachable at both apex and www with proper public DNS. Instead, observe the expected static source IP on outbound TCP probes.
Question 192
A service needs scalable outbound connectivity from several subnets without public IPs on the VMs. During acceptance testing, connections use unintended public addresses or exhaust outbound SNAT. Which underlying configuration problem best explains the symptom?
- A stable Standard public IP was not bound to the load balancer frontend
- Public IP resources were not allocated from the reserved prefix
- The hub allocation failed to reserve adequate gateway subnet space
- NAT Gateway association or public IP SNAT capacity is insufficient
Explanation
Correct Answer
D:NAT Gateway association or public IP SNAT capacity is insufficient explains the observed failure: connections use unintended public addresses or exhaust outbound SNAT. Correct the design by using use NAT Gateway rather than relying on implicit outbound access, implemented through attach NAT Gateway with explicit public IP resources to each eligible subnet.
Incorrect Answers
A:A stable Standard public IP was not bound to the load balancer frontend. This concerns a persistent internet-facing endpoint rather than a vm-level ephemeral address. The relevant SQL or system operation is NAT Gateway association or public IP SNAT capacity is insufficient.
B:Public IP resources were not allocated from the reserved prefix. This concerns providing a contiguous block of predictable azure public ips for partner firewall allowlists. The relevant SQL or system operation is NAT Gateway association or public IP SNAT capacity is insufficient.
C:The hub allocation failed to reserve adequate gateway subnet space. This concerns route-aware service placement before defining the hub address blocks. The relevant SQL or system operation is NAT Gateway association or public IP SNAT capacity is insufficient.
Question 193
A hybrid routing design needs Azure to learn BGP routes from an existing virtual appliance. Which Azure networking design most directly satisfies this requirement?
- Deploy Azure Route Server and establish BGP peering with the NVA
- Eliminate address-space overlap before establishing peering
- Configure supported Azure public DNS A/alias and www record mappings
- Forward Azure private DNS requests to an Azure DNS Private Resolver inbound endpoint
Explanation
Correct Answer
A:Deploy Azure Route Server and establish BGP peering with the NVA addresses the topology, access or delivery requirement in the scenario. Apply it by create Route Server in its required dedicated subnet and set NVA BGP peer parameters; confirm by inspect learned and advertised routes on Azure Route Server and the NVA.
Incorrect Answers
B:Eliminate address-space overlap before establishing peering. This concerns two peered VNets cannot reach one another because each deploys the same subnet prefix. Instead, deploy Azure Route Server and establish BGP peering with the NVA.
C:Configure supported Azure public DNS A/alias and www record mappings. This concerns being reachable at both apex and www with proper public DNS. Instead, deploy Azure Route Server and establish BGP peering with the NVA.
D:Forward Azure private DNS requests to an Azure DNS Private Resolver inbound endpoint. This concerns resolving Azure Private DNS records without manually creating duplicates. Instead, deploy Azure Route Server and establish BGP peering with the NVA.
Question 194
A hybrid routing design needs Azure to learn BGP routes from an existing virtual appliance. The architecture uses this design: Deploy Azure Route Server and establish BGP peering with the NVA. Which configuration should the engineer apply to implement it?
- Create network groups and deploy a hub-and-spoke connectivity configuration
- Create Route Server in its required dedicated subnet and set NVA BGP peer parameters
- Inspect effective rules for the VM NIC including subnet and NIC scope
- Create the private zone and add a virtual network link
Explanation
Correct Answer
B:Create Route Server in its required dedicated subnet and set NVA BGP peer parameters is the operational configuration for deploy azure route server and establish bgp peering with the nva. The acceptance test is to inspect learned and advertised routes on Azure Route Server and the NVA.
Incorrect Answers
A:Create network groups and deploy a hub-and-spoke connectivity configuration is a concrete step for use azure virtual network manager connectivity configurations. Here the selected design is deploy azure route server and establish bgp peering with the nva, which instead requires create route server in its required dedicated subnet and set nva bgp peer parameters.
C:Inspect effective rules for the VM NIC including subnet and NIC scope is a concrete step for use network watcher effective security rules. Here the selected design is deploy azure route server and establish bgp peering with the nva, which instead requires create route server in its required dedicated subnet and set nva bgp peer parameters.
D:Create the private zone and add a virtual network link is a concrete step for use an azure private dns zone linked to the relevant vnet. Here the selected design is deploy azure route server and establish bgp peering with the nva, which instead requires create route server in its required dedicated subnet and set nva bgp peer parameters.
Question 195
A hybrid routing design needs Azure to learn BGP routes from an existing virtual appliance. After the team applies this change—create Route Server in its required dedicated subnet and set NVA BGP peer parameters—which validation best proves the intended result?
- Query an Azure private hostname from a branch DNS client
- Inspect guest resolver settings and query an AD-integrated name
- Test a forwarded spoke-to-spoke flow and inspect the NVA session table
- Inspect learned and advertised routes on Azure Route Server and the NVA
Explanation
Correct Answer
D:Inspect learned and advertised routes on Azure Route Server and the NVA directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether the BGP session or route exchange with Route Server is not established.
Incorrect Answers
A:Query an Azure private hostname from a branch DNS client. This concerns resolving azure private DNS records without manually creating duplicates. Instead, inspect learned and advertised routes on Azure Route Server and the NVA.
B:Inspect guest resolver settings and query an AD-integrated name. This is relevant when a VNet uses an on-premises domain controller for DNS and a new vm still queries azure platform DNS. Instead, inspect learned and advertised routes on Azure Route Server and the NVA.
C:Test a forwarded spoke-to-spoke flow and inspect the NVA session table. This concerns a hub nva will inspect traffic forwarded between peered vnets. Instead, inspect learned and advertised routes on Azure Route Server and the NVA.
Question 196
A hybrid routing design needs Azure to learn BGP routes from an existing virtual appliance. During acceptance testing, expected private prefixes are not learned by Azure workloads. Which underlying configuration problem best explains the symptom?
- Only one reachable DNS server was configured
- The service subnet was mixed with incompatible workloads
- The BGP session or route exchange with Route Server is not established
- A route, NSG, firewall or listener blocks the tested path
Explanation
Correct Answer
C:The BGP session or route exchange with Route Server is not established explains the observed failure: expected private prefixes are not learned by Azure workloads. Correct the design by using deploy Azure Route Server and establish BGP peering with the NVA, implemented through create Route Server in its required dedicated subnet and set NVA BGP peer parameters.
Incorrect Answers
A:Only one reachable DNS server was configured. This concerns failover if one resolver is offline. Here, the BGP session or route exchange with Route Server is not established.
B:The service subnet was mixed with incompatible workloads. This concerns retaining separation from general-purpose virtual machines. Here, the BGP session or route exchange with Route Server is not established.
D:A route, NSG, firewall or listener blocks the tested path. This concerns a path-by-path diagnosis. Here, the BGP session or route exchange with Route Server is not established.
Question 197
A central router advertises destinations that should be usable by multiple spoke VNets. Which Azure networking design most directly satisfies this requirement?
- Compare peering flags, NSGs and each spoke's effective route set
- Validate route propagation and route selection from the connected hub
- Allocate a Standard Public IP Prefix and draw public IPs from the prefix
- Host the public DNS zone in Azure DNS and delegate from the registrar
Explanation
Correct Answer
B:Validate route propagation and route selection from the connected hub addresses the topology, access or delivery requirement in the scenario. Apply it by enable the supported BGP propagation path and review spoke effective routes; confirm by check whether all spokes learn the expected remote prefix.
Incorrect Answers
A:Compare peering flags, NSGs and each spoke's effective route set. This is relevant when an application behind a hub NVA is reachable from one spoke but not another. Here, validate route propagation and route selection from the connected hub.
C:Allocate a Standard Public IP Prefix and draw public IPs from the prefix. This concerns providing a contiguous block of predictable Azure public IPs for partner firewall allowlists. Here, validate route propagation and route selection from the connected hub.
D:Host the public DNS zone in Azure DNS and delegate from the registrar. This concerns an organization publishes an external company domain using Azure-hosted authoritative DNS. Here, validate route propagation and route selection from the connected hub.
Question 198
A central router advertises destinations that should be usable by multiple spoke VNets. The architecture uses this design: Validate route propagation and route selection from the connected hub. Which configuration should the engineer apply to implement it?
- Inspect effective rules for the VM NIC including subnet and NIC scope
- Attach supported NIC IP configurations to the distinct workload subnets
- Enable the supported BGP propagation path and review spoke effective routes
- Run IP flow verification and inspect both spokes' routes to the application
Explanation
Correct Answer
C:Enable the supported BGP propagation path and review spoke effective routes is the operational configuration for validate route propagation and route selection from the connected hub. The acceptance test is to check whether all spokes learn the expected remote prefix.
Incorrect Answers
A:Inspect effective rules for the VM NIC including subnet and NIC scope is a concrete step for use network watcher effective security rules. Here the selected design is validate route propagation and route selection from the connected hub, which instead requires enable the supported bgp propagation path and review spoke effective routes.
B:Attach supported NIC IP configurations to the distinct workload subnets is a concrete step for assign the appliance nics to valid, segregated subnets within one vnet. Here the selected design is validate route propagation and route selection from the connected hub, which instead requires enable the supported bgp propagation path and review spoke effective routes.
D:Run IP flow verification and inspect both spokes' routes to the application is a concrete step for compare peering flags, nsgs and each spoke's effective route set. Here the selected design is validate route propagation and route selection from the connected hub, which instead requires enable the supported bgp propagation path and review spoke effective routes.
Question 199
A central router advertises destinations that should be usable by multiple spoke VNets. After the team applies this change—enable the supported BGP propagation path and review spoke effective routes—which validation best proves the intended result?
- Identify a concrete route or policy difference between the two spokes
- Query the authoritative public zone for MX and confirm expected values
- Check whether all spokes learn the expected remote prefix
- Confirm created public IP addresses belong to the allocated prefix
Explanation
Correct Answer
C:Check whether all spokes learn the expected remote prefix directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether effective routes in that spoke omit the propagated destination.
Incorrect Answers
A:Identify a concrete route or policy difference between the two spokes. This is relevant when an application behind a hub nva is reachable from one spoke but not another. Instead, check whether all spokes learn the expected remote prefix.
B:Query the authoritative public zone for MX and confirm expected values. This concerns direct mail to an externally hosted mail service. Instead, check whether all spokes learn the expected remote prefix.
D:Confirm created public IP addresses belong to the allocated prefix. This concerns providing a contiguous block of predictable azure public ips for partner firewall allowlists. Instead, check whether all spokes learn the expected remote prefix.
Question 200
A central router advertises destinations that should be usable by multiple spoke VNets. During acceptance testing, one spoke sends a remote prefix to internet instead of the hub. Which underlying configuration problem best explains the symptom?
- Effective routes in that spoke omit the propagated destination
- The forwarding ruleset link is missing from the spoke
- Effective security rules from both attachment levels were not considered
- An effective NSG rule denies the tested flow
Explanation
Correct Answer
A:Effective routes in that spoke omit the propagated destination explains the observed failure: one spoke sends a remote prefix to internet instead of the hub. Correct the design by using validate route propagation and route selection from the connected hub, implemented through enable the supported BGP propagation path and review spoke effective routes.
Incorrect Answers
B:The forwarding ruleset link is missing from the spoke. This concerns a private DNS forwarding ruleset available to multiple spokes. Here, effective routes in that spoke omit the propagated destination.
C:Effective security rules from both attachment levels were not considered. This concerns identifying effective network security rules after overlapping NSG associations. Here, effective routes in that spoke omit the propagated destination.
D:An effective NSG rule denies the tested flow. This concerns knowing if an NSG blocks a vm's outbound tcp connection. Here, effective routes in that spoke omit the propagated destination.
Designing and Implementing Microsoft Azure Networking Solutions (AZ-700) Practice Tests