100% Latest & Updated Microsoft AZ-700 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 400
An enterprise needs ExpressRoute connectivity between distant geopolitical regions. During acceptance testing, a remote region connection is denied despite capacity. Which underlying configuration problem best explains the symptom?
- The circuit tier does not permit the requested geographic reach
- The IPsec traffic selector configuration does not include them
- The gateway cannot reach the RADIUS endpoint or the shared secret differs
- GatewaySubnet naming or sizing does not meet requirements
Explanation
Correct Answer
A:The circuit tier does not permit the requested geographic reach explains the observed failure: a remote region connection is denied despite capacity. Correct the design by using evaluate ExpressRoute Premium and Global Reach coverage requirements, implemented through choose an eligible ExpressRoute SKU/add-on for required geographic reach.
Incorrect Answers
B:The IPsec traffic selector configuration does not include them. This concerns a legacy on-premises IPSEC device only supports policy-based traffic selectors. Here, the circuit tier does not permit the requested geographic reach.
C:The gateway cannot reach the RADIUS endpoint or the shared secret differs. This concerns a central radius service to validate users. Here, the circuit tier does not permit the requested geographic reach.
D:GatewaySubnet naming or sizing does not meet requirements. This is relevant when a vpn gateway is provisioned but its resource cannot be placed in the intended VNet. Here, the circuit tier does not permit the requested geographic reach.
Question 401
A company wants a high-throughput dedicated connection to Microsoft without a standard provider-managed circuit. Which TWO listed choices identify the suitable Azure design and the concrete configuration required to implement it? (Choose TWO.)
- Update customer edge BGP prefix advertisements on ExpressRoute private peering
- Evaluate ExpressRoute Direct for dedicated physical ports
- Evaluate Azure P2S settings against Windows Always On VPN prerequisites
- Create the virtual hub VPN gateway and configure VPN sites and connections
- Provision ExpressRoute Direct ports and create appropriate circuits on them
Explanation
Correct Answers
B:Evaluate ExpressRoute Direct for dedicated physical ports addresses the topology, access or delivery requirement in the scenario. Apply it by provision ExpressRoute Direct ports and create appropriate circuits on them; confirm by inspect port link health and circuit provisioning for each circuit.
E:Provision ExpressRoute Direct ports and create appropriate circuits on them is the operational configuration for evaluate expressroute direct for dedicated physical ports. The acceptance test is to inspect port link health and circuit provisioning for each circuit.
Incorrect Answers
A:Update customer edge BGP prefix advertisements on ExpressRoute private peering. This concerns routing advertisement changes between the datacenter and Azure VNet. Instead, evaluate ExpressRoute Direct for dedicated physical ports.
C:Evaluate Azure P2S settings against Windows Always On VPN prerequisites. This concerns connecting automatically to corporate resources when policy requires. Instead, evaluate ExpressRoute Direct for dedicated physical ports.
D:Create the virtual hub VPN gateway and configure VPN sites and connections is a concrete step for deploy a site-to-site vpn gateway inside the virtual wan virtual hub. Here the selected design is evaluate expressroute direct for dedicated physical ports, which instead requires provision expressroute direct ports and create appropriate circuits on them.
Question 402
A company wants a high-throughput dedicated connection to Microsoft without a standard provider-managed circuit. The architecture uses this design: Evaluate ExpressRoute Direct for dedicated physical ports. Which configuration should the engineer apply to implement it?
- Create the virtual hub VPN gateway and configure VPN sites and connections
- Provision ExpressRoute Direct ports and create appropriate circuits on them
- Choose an eligible ExpressRoute SKU/add-on for required geographic reach
- Create a Standard Virtual WAN, virtual hub and required branch/VNet connections
Explanation
Correct Answer
B:Provision ExpressRoute Direct ports and create appropriate circuits on them is the operational configuration for evaluate expressroute direct for dedicated physical ports. The acceptance test is to inspect port link health and circuit provisioning for each circuit.
Incorrect Answers
A:Create the virtual hub VPN gateway and configure VPN sites and connections is a concrete step for deploy a site-to-site vpn gateway inside the virtual wan virtual hub. Here the selected design is evaluate expressroute direct for dedicated physical ports, which instead requires provision expressroute direct ports and create appropriate circuits on them.
C:Choose an eligible ExpressRoute SKU/add-on for required geographic reach is a concrete step for evaluate expressroute premium and global reach coverage requirements. Here the selected design is evaluate expressroute direct for dedicated physical ports, which instead requires provision expressroute direct ports and create appropriate circuits on them.
D:Create a Standard Virtual WAN, virtual hub and required branch/VNet connections is a concrete step for use azure virtual wan with a standard virtual hub design. Here the selected design is evaluate expressroute direct for dedicated physical ports, which instead requires provision expressroute direct ports and create appropriate circuits on them.
Question 403
A company wants a high-throughput dedicated connection to Microsoft without a standard provider-managed circuit. After the team applies this change—provision ExpressRoute Direct ports and create appropriate circuits on them—which validation best proves the intended result?
- Inspect BGP learned routes and test a newly advertised prefix
- Inspect effective hub routes and simulate allowed and disallowed paths
- Inspect port link health and circuit provisioning for each circuit
- Inspect FastPath configuration and measure the supported VM data path
Explanation
Correct Answer
C:Inspect port link health and circuit provisioning for each circuit directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether the ExpressRoute Direct resource or port capacity was not configured.
Incorrect Answers
A:Inspect BGP learned routes and test a newly advertised prefix. This concerns advertising and learn routes dynamically across a routed vpn. Instead, inspect port link health and circuit provisioning for each circuit.
B:Inspect effective hub routes and simulate allowed and disallowed paths. This concerns controlled inter-hub route propagation. Instead, inspect port link health and circuit provisioning for each circuit.
D:Inspect FastPath configuration and measure the supported VM data path. This concerns an azure VNet gateway that sends applicable traffic directly over the expressroute data path for better throughput. Instead, inspect port link health and circuit provisioning for each circuit.
Question 404
A company wants a high-throughput dedicated connection to Microsoft without a standard provider-managed circuit. During acceptance testing, the team cannot provision the intended circuits on reserved ports. Which underlying configuration problem best explains the symptom?
- No ExpressRoute gateway-to-circuit connection exists in the hub
- The ExpressRoute Direct resource or port capacity was not configured
- Only one functional tunnel path was configured
- The hub NVA integration or routing intent is not configured
Explanation
Correct Answer
B:The ExpressRoute Direct resource or port capacity was not configured explains the observed failure: the team cannot provision the intended circuits on reserved ports. Correct the design by using evaluate ExpressRoute Direct for dedicated physical ports, implemented through provision ExpressRoute Direct ports and create appropriate circuits on them.
Incorrect Answers
A:No ExpressRoute gateway-to-circuit connection exists in the hub. This concerns private expressroute access to its global virtual wan topology. Here, the ExpressRoute Direct resource or port capacity was not configured.
C:Only one functional tunnel path was configured. This concerns two branch vpn devices should both be able to provide resilient connectivity to azure. Here, the ExpressRoute Direct resource or port capacity was not configured.
D:The hub NVA integration or routing intent is not configured. This concerns a third-party network virtual appliance inserted into virtual wan traffic paths. Here, the ExpressRoute Direct resource or port capacity was not configured.
Question 405
Two on-premises offices each have ExpressRoute circuits and must communicate privately through Microsoft backbone when supported. Which Azure networking design most directly satisfies this requirement?
- Choose a supported VpnGw gateway generation/SKU based on documented scale needs
- Select supported OpenVPN or IKEv2 according to platform and auth requirements
- Use ExpressRoute Global Reach where supported
- Choose Microsoft peering only when its supported service requirements apply
Explanation
Correct Answer
C:Use ExpressRoute Global Reach where supported addresses the topology, access or delivery requirement in the scenario. Apply it by enable Global Reach connections between eligible circuits and verify peering parameters; confirm by test private connectivity between the two customer sites.
Incorrect Answers
A:Choose a supported VpnGw gateway generation/SKU based on documented scale needs. This concerns selecting a VPN Gateway SKU for expected throughput and resiliency. Instead, use ExpressRoute Global Reach where supported.
B:Select supported OpenVPN or IKEv2 according to platform and auth requirements. This concerns using an approved tunnel protocol for mobile remote-user connectivity. Instead, use ExpressRoute Global Reach where supported.
D:Choose Microsoft peering only when its supported service requirements apply. This concerns Microsoft peering to reach applicable Microsoft public service prefixes. Instead, use ExpressRoute Global Reach where supported.
Question 406
Two on-premises offices each have ExpressRoute circuits and must communicate privately through Microsoft backbone when supported. The architecture uses this design: Use ExpressRoute Global Reach where supported. Which configuration should the engineer apply to implement it?
- Set tenant, audience and issuer parameters and use the Azure VPN Client
- Set separate peer subnets and BGP parameters for the redundant paths
- Create the virtual hub VPN gateway and configure VPN sites and connections
- Enable Global Reach connections between eligible circuits and verify peering parameters
Explanation
Correct Answer
D:Enable Global Reach connections between eligible circuits and verify peering parameters is the operational configuration for use expressroute global reach where supported. The acceptance test is to test private connectivity between the two customer sites.
Incorrect Answers
A:Set tenant, audience and issuer parameters and use the Azure VPN Client is a concrete step for choose a supported openvpn p2s configuration with microsoft entra id. Here the selected design is use expressroute global reach where supported, which instead requires enable global reach connections between eligible circuits and verify peering parameters.
B:Set separate peer subnets and BGP parameters for the redundant paths is a concrete step for configure both primary and secondary bgp peering connections. Here the selected design is use expressroute global reach where supported, which instead requires enable global reach connections between eligible circuits and verify peering parameters.
C:Create the virtual hub VPN gateway and configure VPN sites and connections is a concrete step for deploy a site-to-site vpn gateway inside the virtual wan virtual hub. Here the selected design is use expressroute global reach where supported, which instead requires enable global reach connections between eligible circuits and verify peering parameters.
Question 407
Two on-premises offices each have ExpressRoute circuits and must communicate privately through Microsoft backbone when supported. After the team applies this change—enable Global Reach connections between eligible circuits and verify peering parameters—which validation best proves the intended result?
- Test private connectivity between the two customer sites
- Inspect circuit provider status and Azure private peering state
- Check connection status and pass private TCP traffic across the tunnel
- Sign in with a test identity and confirm token-based access
Explanation
Correct Answer
A:Test private connectivity between the two customer sites directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether global Reach circuit-to-circuit connectivity was not configured.
Incorrect Answers
B:Inspect circuit provider status and Azure private peering state. This concerns a private connectivity path from its network provider into microsoft cloud. Instead, test private connectivity between the two customer sites.
C:Check connection status and pass private TCP traffic across the tunnel. This concerns an encrypted tunnel to an azure VNet over the public internet. Instead, test private connectivity between the two customer sites.
D:Sign in with a test identity and confirm token-based access. This concerns microsoft entra authentication for user vpn clients. Instead, test private connectivity between the two customer sites.
Question 408
Two on-premises offices each have ExpressRoute circuits and must communicate privately through Microsoft backbone when supported. During acceptance testing, the two customer sites cannot route to each other over the circuits. Which underlying configuration problem best explains the symptom?
- Only one functional tunnel path was configured
- No ExpressRoute gateway-to-circuit connection exists in the hub
- The gateway cannot reach the RADIUS endpoint or the shared secret differs
- Global Reach circuit-to-circuit connectivity was not configured
Explanation
Correct Answer
D:Global Reach circuit-to-circuit connectivity was not configured explains the observed failure: the two customer sites cannot route to each other over the circuits. Correct the design by using use ExpressRoute Global Reach where supported, implemented through enable Global Reach connections between eligible circuits and verify peering parameters.
Incorrect Answers
A:Only one functional tunnel path was configured. This concerns two branch vpn devices should both be able to provide resilient connectivity to azure. The requested service or concept is Global Reach circuit-to-circuit connectivity was not configured.
B:No ExpressRoute gateway-to-circuit connection exists in the hub. This concerns private expressroute access to its global virtual wan topology. The requested service or concept is Global Reach circuit-to-circuit connectivity was not configured.
C:The gateway cannot reach the RADIUS endpoint or the shared secret differs. This concerns a central radius service to validate users. The requested service or concept is Global Reach circuit-to-circuit connectivity was not configured.
Question 409
An ExpressRoute circuit should provide redundant paths through two independent peering sessions. Which Azure networking design most directly satisfies this requirement?
- Configure both primary and secondary BGP peering connections
- Validate transit routes, peering and client routing for the remote pool
- Compare provider provisioning, Azure circuit state and BGP peering diagnostics
- Investigate symmetric routing and firewall rules on both ends
Explanation
Correct Answer
A:Configure both primary and secondary BGP peering connections addresses the topology, access or delivery requirement in the scenario. Apply it by set separate peer subnets and BGP parameters for the redundant paths; confirm by bring down one BGP peer and inspect remaining reachability.
Incorrect Answers
B:Validate transit routes, peering and client routing for the remote pool. This is relevant when a VPN user can reach the hub VNet but cannot access a connected spoke. Instead, configure both primary and secondary BGP peering connections.
C:Compare provider provisioning, Azure circuit state and BGP peering diagnostics. This is relevant when a team is troubleshooting a circuit that is not passing traffic after handoff. Instead, configure both primary and secondary BGP peering connections.
D:Investigate symmetric routing and firewall rules on both ends. This concerns a VPN connects but only Azure-to-branch traffic succeeds, not the reverse. Instead, configure both primary and secondary BGP peering connections.
Question 410
An ExpressRoute circuit should provide redundant paths through two independent peering sessions. The architecture uses this design: Configure both primary and secondary BGP peering connections. Which configuration should the engineer apply to implement it?
- Enable active-active gateway operation and configure the two public peer endpoints
- Compare AS paths/local policies and advertised prefixes on both circuits
- Configure independent local network gateways/connections for both provider paths
- Set separate peer subnets and BGP parameters for the redundant paths
Explanation
Correct Answer
D:Set separate peer subnets and BGP parameters for the redundant paths is the operational configuration for configure both primary and secondary bgp peering connections. The acceptance test is to bring down one BGP peer and inspect remaining reachability.
Incorrect Answers
A:Enable active-active gateway operation and configure the two public peer endpoints is a concrete step for use a supported active-active vpn gateway topology. Here the selected design is configure both primary and secondary bgp peering connections, which instead requires set separate peer subnets and bgp parameters for the redundant paths.
B:Compare AS paths/local policies and advertised prefixes on both circuits is a concrete step for correct bgp route preference and path selection across hybrid links. Here the selected design is configure both primary and secondary bgp peering connections, which instead requires set separate peer subnets and bgp parameters for the redundant paths.
C:Configure independent local network gateways/connections for both provider paths is a concrete step for use redundant site-to-site vpn connections over separate isp endpoints. Here the selected design is configure both primary and secondary bgp peering connections, which instead requires set separate peer subnets and bgp parameters for the redundant paths.
Designing and Implementing Microsoft Azure Networking Solutions (AZ-700) Practice Tests