100% Latest & Updated Microsoft AZ-700 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 740
A database team wonders whether Private Endpoint gives the database a private IP inside the application subnet. During acceptance testing, developers assume the managed database engine itself was moved into their VNet. Which underlying configuration problem best explains the symptom?
- No effective service endpoint policy restricts target accounts
- Storage firewall has no matching VNet allow rule
- The endpoint policy scope or association is incorrect
- They are confusing private endpoint access with hosting the service inside the VNet
Explanation
Correct Answer
D:They are confusing private endpoint access with hosting the service inside the VNet explains the observed failure: developers assume the managed database engine itself was moved into their VNet. Correct the design by using use the endpoint NIC private address while leaving the managed service externally hosted, implemented through create the private endpoint IP configuration in the designated subnet.
Incorrect Answers
A:No effective service endpoint policy restricts target accounts. This concerns limit which storage accounts a subnet can reach over service endpoints. Here, they are confusing private endpoint access with hosting the service inside the VNet.
B:Storage firewall has no matching VNet allow rule. This is relevant when a subnet's service endpoint setting exists but storage traffic is still rejected. Here, they are confusing private endpoint access with hosting the service inside the VNet.
C:The endpoint policy scope or association is incorrect. This concerns resource-level governance over which azure storage accounts a VNet may access. Here, they are confusing private endpoint access with hosting the service inside the VNet.
Question 741
A partner-owned Azure Private Link Service needs to allow only explicitly approved endpoint consumers. Which Azure networking design most directly satisfies this requirement?
- Require manual private endpoint approval and check connection state
- Apply an Azure Storage service endpoint policy to the subnet
- Publish the service through Azure Private Link Service
- Use Storage service endpoint policies with scoped resource definitions
Explanation
Correct Answer
A:Require manual private endpoint approval and check connection state addresses the topology, access or delivery requirement in the scenario. Apply it by configure the service's approval workflow and authorize named connections; confirm by attempt an unapproved connection then an approved one.
Incorrect Answers
B:Apply an Azure Storage service endpoint policy to the subnet. This concerns limit which storage accounts a subnet can reach over service endpoints. Instead, require manual private endpoint approval and check connection state.
C:Publish the service through Azure Private Link Service. This concerns a vendor provides a custom Azure service behind its own internal Standard Load Balancer. Instead, require manual private endpoint approval and check connection state.
D:Use Storage service endpoint policies with scoped resource definitions. This concerns resource-level governance over which Azure Storage accounts a VNet may access. Instead, require manual private endpoint approval and check connection state.
Question 742
A partner-owned Azure Private Link Service needs to allow only explicitly approved endpoint consumers. The architecture uses this design: Require manual private endpoint approval and check connection state. Which configuration should the engineer apply to implement it?
- Configure the service's approval workflow and authorize named connections
- Enable service endpoint and add the specific subnet to allowed network rules
- Review the target resource's private endpoint connections and approve the request
- Enable the subnet service endpoint without creating a private endpoint NIC
Explanation
Correct Answer
A:Configure the service's approval workflow and authorize named connections is the operational configuration for require manual private endpoint approval and check connection state. The acceptance test is to attempt an unapproved connection then an approved one.
Incorrect Answers
B:Enable service endpoint and add the specific subnet to allowed network rules is a concrete step for use service endpoint-based virtual network access rules on the storage account. Here the selected design is require manual private endpoint approval and check connection state, which instead requires configure the service's approval workflow and authorize named connections.
C:Review the target resource's private endpoint connections and approve the request is a concrete step for approve the private endpoint connection at the service side. Here the selected design is require manual private endpoint approval and check connection state, which instead requires configure the service's approval workflow and authorize named connections.
D:Enable the subnet service endpoint without creating a private endpoint NIC is a concrete step for explain that service endpoints retain public service fqdns and ips. Here the selected design is require manual private endpoint approval and check connection state, which instead requires configure the service's approval workflow and authorize named connections.
Question 743
A partner-owned Azure Private Link Service needs to allow only explicitly approved endpoint consumers. After the team applies this change—configure the service's approval workflow and authorize named connections—which validation best proves the intended result?
- Attempt an unapproved connection then an approved one
- Inspect connection status and perform an authorized storage request
- Resolve the service FQDN privately from the branch and establish a connection
- Test connection to an allowed and forbidden storage account
Explanation
Correct Answer
A:Attempt an unapproved connection then an approved one directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether autoapproval scope was configured too broadly.
Incorrect Answers
B:Inspect connection status and perform an authorized storage request. This is relevant when a storage private endpoint has been created but remains pending approval. Here, attempt an unapproved connection then an approved one.
C:Resolve the service FQDN privately from the branch and establish a connection. This concerns a design compares private endpoints and service endpoints for inbound access from a branch network. Here, attempt an unapproved connection then an approved one.
D:Test connection to an allowed and forbidden storage account. This concerns limit which storage accounts a subnet can reach over service endpoints. Here, attempt an unapproved connection then an approved one.
Question 744
A partner-owned Azure Private Link Service needs to allow only explicitly approved endpoint consumers. During acceptance testing, new consumer endpoints automatically connect without review. Which underlying configuration problem best explains the symptom?
- The endpoint policy scope or association is incorrect
- Service endpoints do not provide an on-premises private IP endpoint
- Storage firewall has no matching VNet allow rule
- Autoapproval scope was configured too broadly
Explanation
Correct Answer
D:Autoapproval scope was configured too broadly explains the observed failure: new consumer endpoints automatically connect without review. Correct the design by using require manual private endpoint approval and check connection state, implemented through configure the service's approval workflow and authorize named connections.
Incorrect Answers
A:The endpoint policy scope or association is incorrect. This concerns resource-level governance over which azure storage accounts a VNet may access. Here, autoapproval scope was configured too broadly.
B:Service endpoints do not provide an on-premises private IP endpoint. This concerns a design compares private endpoints and service endpoints for inbound access from a branch network. Here, autoapproval scope was configured too broadly.
C:Storage firewall has no matching VNet allow rule. This is relevant when a subnet's service endpoint setting exists but storage traffic is still rejected. Here, autoapproval scope was configured too broadly.
Question 745
A company has Private Endpoint but a workload's custom DNS server cannot resolve the privatelink zone. Which TWO listed choices identify the suitable Azure design and the concrete configuration required to implement it? (Choose TWO.)
- Create the private endpoint and DNS integration, then restrict public access
- Ensure hub-spoke routing and DNS are valid for the endpoint's private IP
- Create conditional forwarding on custom DNS and ensure forwarding target reachability
- Forward relevant private DNS suffix queries toward an Azure private resolver
- Choose Private Endpoint rather than service endpoint for private IP requirements
Explanation
Correct Answers
C:Create conditional forwarding on custom DNS and ensure forwarding target reachability is the operational configuration for forward relevant private dns suffix queries toward an azure private resolver. The acceptance test is to test private service FQDN lookup from custom-DNS clients.
D:Forward relevant private DNS suffix queries toward an Azure private resolver addresses the topology, access or delivery requirement in the scenario. Apply it by create conditional forwarding on custom DNS and ensure forwarding target reachability; confirm by test private service FQDN lookup from custom-DNS clients.
Incorrect Answers
A:Create the private endpoint and DNS integration, then restrict public access is a concrete step for choose private endpoint rather than service endpoint for private ip requirements. Here the selected design is forward relevant private dns suffix queries toward an azure private resolver, which instead requires create conditional forwarding on custom dns and ensure forwarding target reachability.
B:Ensure hub-spoke routing and DNS are valid for the endpoint's private IP. This concerns being accessed from hub workloads. Instead, create conditional forwarding on custom DNS and ensure forwarding target reachability.
E:Choose Private Endpoint rather than service endpoint for private IP requirements. This concerns all PaaS connections to remain on exclusively private addresses. Instead, create conditional forwarding on custom DNS and ensure forwarding target reachability.
Question 746
A company has Private Endpoint but a workload's custom DNS server cannot resolve the privatelink zone. The architecture uses this design: Forward relevant private DNS suffix queries toward an Azure private resolver. Which configuration should the engineer apply to implement it?
- Deploy a private endpoint and hybrid DNS forwarding rather than only a service endpoint
- Create conditional forwarding on custom DNS and ensure forwarding target reachability
- Create the private endpoint and DNS integration, then restrict public access
- Create the private endpoint IP configuration in the designated subnet
Explanation
Correct Answer
B:Create conditional forwarding on custom DNS and ensure forwarding target reachability is the operational configuration for forward relevant private dns suffix queries toward an azure private resolver. The acceptance test is to test private service FQDN lookup from custom-DNS clients.
Incorrect Answers
A:Deploy a private endpoint and hybrid DNS forwarding rather than only a service endpoint is a concrete step for prefer private link when the service must be reached by a private ip over hybrid links. Here the selected design is forward relevant private dns suffix queries toward an azure private resolver, which instead requires create conditional forwarding on custom dns and ensure forwarding target reachability.
C:Create the private endpoint and DNS integration, then restrict public access is a concrete step for choose private endpoint rather than service endpoint for private ip requirements. Here the selected design is forward relevant private dns suffix queries toward an azure private resolver, which instead requires create conditional forwarding on custom dns and ensure forwarding target reachability.
D:Create the private endpoint IP configuration in the designated subnet is a concrete step for use the endpoint nic private address while leaving the managed service externally hosted. Here the selected design is forward relevant private dns suffix queries toward an azure private resolver, which instead requires create conditional forwarding on custom dns and ensure forwarding target reachability.
Question 747
A company has Private Endpoint but a workload's custom DNS server cannot resolve the privatelink zone. After the team applies this change—create conditional forwarding on custom DNS and ensure forwarding target reachability—which validation best proves the intended result?
- Retry storage operations from the approved subnet
- Test connection to an allowed and forbidden storage account
- Test private service FQDN lookup from custom-DNS clients
- Test deployment into approved and disallowed locations
Explanation
Correct Answer
C:Test private service FQDN lookup from custom-DNS clients directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether custom DNS does not forward the privatelink zone.
Incorrect Answers
A:Retry storage operations from the approved subnet. This is relevant when a subnet's service endpoint setting exists but storage traffic is still rejected. Instead, test private service FQDN lookup from custom-DNS clients.
B:Test connection to an allowed and forbidden storage account. This concerns limit which storage accounts a subnet can reach over service endpoints. Instead, test private service FQDN lookup from custom-DNS clients.
D:Test deployment into approved and disallowed locations. This concerns restricting creation of private endpoints to designated subnet boundaries. Instead, test private service FQDN lookup from custom-DNS clients.
Question 748
A company has Private Endpoint but a workload's custom DNS server cannot resolve the privatelink zone. During acceptance testing, direct IP access works but name-based service access fails. Which underlying configuration problem best explains the symptom?
- Storage firewall VNet rule or service endpoint configuration is missing
- Service endpoints do not allocate private endpoint IPs
- Custom DNS does not forward the privatelink zone
- No effective service endpoint policy restricts target accounts
Explanation
Correct Answer
C:Custom DNS does not forward the privatelink zone explains the observed failure: direct IP access works but name-based service access fails. Correct the design by using forward relevant private DNS suffix queries toward an Azure private resolver, implemented through create conditional forwarding on custom DNS and ensure forwarding target reachability.
Incorrect Answers
A:Storage firewall VNet rule or service endpoint configuration is missing. This concerns a higher-trust path to azure storage while retaining the service's public endpoint. Here, custom DNS does not forward the privatelink zone.
B:Service endpoints do not allocate private endpoint IPs. This concerns a developer thinks azure service endpoints give a storage account a private address inside the VNet. Here, custom DNS does not forward the privatelink zone.
D:No effective service endpoint policy restricts target accounts. This concerns limit which storage accounts a subnet can reach over service endpoints. Here, custom DNS does not forward the privatelink zone.
Question 749
A Private Link Service producer must publish a service to multiple consumers through one approved frontend. Which Azure networking design most directly satisfies this requirement?
- Enable a Microsoft.Storage virtual network service endpoint
- Explain that service endpoints retain public service FQDNs and IPs
- Use the proper Private DNS zone group integration
- Attach Private Link Service to the supported internal Standard Load Balancer frontend
Explanation
Correct Answer
D:Attach Private Link Service to the supported internal Standard Load Balancer frontend addresses the topology, access or delivery requirement in the scenario. Apply it by configure provider-side frontend and NAT IP configuration for the service; confirm by create two approved consumer private endpoints and verify backend access.
Incorrect Answers
A:Enable a Microsoft.Storage virtual network service endpoint. This concerns a higher-trust path to Azure Storage while retaining the service's public endpoint. Instead, attach Private Link Service to the supported internal Standard Load Balancer frontend.
B:Explain that service endpoints retain public service FQDNs and IPs. This concerns a developer thinks Azure service endpoints give a storage account a private address inside the VNet. Instead, attach Private Link Service to the supported internal Standard Load Balancer frontend.
C:Use the proper Private DNS zone group integration. This concerns a private endpoint NIC appears healthy but its DNS records were never populated. Instead, attach Private Link Service to the supported internal Standard Load Balancer frontend.
Question 750
A Private Link Service producer must publish a service to multiple consumers through one approved frontend. The architecture uses this design: Attach Private Link Service to the supported internal Standard Load Balancer frontend. Which configuration should the engineer apply to implement it?
- Enable service endpoint and add the specific subnet to allowed network rules
- Configure provider-side frontend and NAT IP configuration for the service
- Recreate or correctly configure the endpoint with target resource ID and subresource
- Inspect service endpoint and policy association properties for both subnets
Explanation
Correct Answer
B:Configure provider-side frontend and NAT IP configuration for the service is the operational configuration for attach private link service to the supported internal standard load balancer frontend. The acceptance test is to create two approved consumer private endpoints and verify backend access.
Incorrect Answers
A:Enable service endpoint and add the specific subnet to allowed network rules is a concrete step for use service endpoint-based virtual network access rules on the storage account. Here the selected design is attach private link service to the supported internal standard load balancer frontend, which instead requires configure provider-side frontend and nat ip configuration for the service.
C:Recreate or correctly configure the endpoint with target resource ID and subresource is a concrete step for correct the private endpoint target resource before using it. Here the selected design is attach private link service to the supported internal standard load balancer frontend, which instead requires configure provider-side frontend and nat ip configuration for the service.
D:Inspect service endpoint and policy association properties for both subnets is a concrete step for apply the policy to the exact production subnet and verify service endpoint enabled. Here the selected design is attach private link service to the supported internal standard load balancer frontend, which instead requires configure provider-side frontend and nat ip configuration for the service.
Designing and Implementing Microsoft Azure Networking Solutions (AZ-700) Practice Tests