100% Latest & Updated Microsoft AZ-700 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 760
A new private endpoint points at the wrong Azure Storage account. During acceptance testing, requests land at a different account from the one intended. Which underlying configuration problem best explains the symptom?
- Service endpoints do not provide an on-premises private IP endpoint
- The endpoint references the wrong target resource ID
- A service endpoint was chosen for a requirement that needs Private Link
- Only development's subnet has the service endpoint policy attached
Explanation
Correct Answer
B:The endpoint references the wrong target resource ID explains the observed failure: requests land at a different account from the one intended. Correct the design by using correct the private endpoint target resource before using it, implemented through recreate or correctly configure the endpoint with target resource ID and subresource.
Incorrect Answers
A:Service endpoints do not provide an on-premises private IP endpoint. This concerns a design compares private endpoints and service endpoints for inbound access from a branch network. Here, the endpoint references the wrong target resource ID.
C:A service endpoint was chosen for a requirement that needs Private Link. This concerns all paas connections to remain on exclusively private addresses. Here, the endpoint references the wrong target resource ID.
D:Only development's subnet has the service endpoint policy attached. This concerns a service endpoint policy works in development but not in the production subnet. Here, the endpoint references the wrong target resource ID.
Question 761
A subnet needs a higher-trust path to Azure Storage while retaining the service's public endpoint. Which TWO listed choices identify the suitable Azure design and the concrete configuration required to implement it? (Choose TWO.)
- Use supported Private Link Service visibility and approval controls
- Prefer Private Link when the service must be reached by a private IP over hybrid links
- Enable the Storage service endpoint on the subnet and allow the subnet in storage firewall rules
- Enable a Microsoft.Storage virtual network service endpoint
- Add the vault private endpoint and appropriate private DNS zone group
Explanation
Correct Answers
C:Enable the Storage service endpoint on the subnet and allow the subnet in storage firewall rules is the operational configuration for enable a microsoft.storage virtual network service endpoint. The acceptance test is to check subnet service endpoints and authorize a storage request from that subnet.
D:Enable a Microsoft.Storage virtual network service endpoint addresses the topology, access or delivery requirement in the scenario. Apply it by enable the Storage service endpoint on the subnet and allow the subnet in storage firewall rules; confirm by check subnet service endpoints and authorize a storage request from that subnet.
Incorrect Answers
A:Use supported Private Link Service visibility and approval controls. This concerns identifying different consumer connections. Instead, enable the Storage service endpoint on the subnet and allow the subnet in storage firewall rules.
B:Prefer Private Link when the service must be reached by a private IP over hybrid links. This concerns a design compares private endpoints and service endpoints for inbound access from a branch network. Instead, enable the Storage service endpoint on the subnet and allow the subnet in storage firewall rules.
E:Add the vault private endpoint and appropriate private DNS zone group is a concrete step for create an azure key vault private endpoint and restrict public network access. Here the selected design is enable a microsoft.storage virtual network service endpoint, which instead requires enable the storage service endpoint on the subnet and allow the subnet in storage firewall rules.
Question 762
A subnet needs a higher-trust path to Azure Storage while retaining the service's public endpoint. The architecture uses this design: Enable a Microsoft.Storage virtual network service endpoint. Which configuration should the engineer apply to implement it?
- Create private endpoint connection to the SQL server and approve it
- Create the private endpoint and DNS integration, then restrict public access
- Enable the Storage service endpoint on the subnet and allow the subnet in storage firewall rules
- Add the vault private endpoint and appropriate private DNS zone group
Explanation
Correct Answer
C:Enable the Storage service endpoint on the subnet and allow the subnet in storage firewall rules is the operational configuration for enable a microsoft.storage virtual network service endpoint. The acceptance test is to check subnet service endpoints and authorize a storage request from that subnet.
Incorrect Answers
A:Create private endpoint connection to the SQL server and approve it is a concrete step for use an azure sql database private endpoint with correct subresource. Here the selected design is enable a microsoft.storage virtual network service endpoint, which instead requires enable the storage service endpoint on the subnet and allow the subnet in storage firewall rules.
B:Create the private endpoint and DNS integration, then restrict public access is a concrete step for choose private endpoint rather than service endpoint for private ip requirements. Here the selected design is enable a microsoft.storage virtual network service endpoint, which instead requires enable the storage service endpoint on the subnet and allow the subnet in storage firewall rules.
D:Add the vault private endpoint and appropriate private DNS zone group is a concrete step for create an azure key vault private endpoint and restrict public network access. Here the selected design is enable a microsoft.storage virtual network service endpoint, which instead requires enable the storage service endpoint on the subnet and allow the subnet in storage firewall rules.
Question 763
A subnet needs a higher-trust path to Azure Storage while retaining the service's public endpoint. After the team applies this change—enable the Storage service endpoint on the subnet and allow the subnet in storage firewall rules—which validation best proves the intended result?
- Test access from allowed and disallowed subnets
- Validate approval and connect to the service private IP
- Try an external public request and a private endpoint request
- Check subnet service endpoints and authorize a storage request from that subnet
Explanation
Correct Answer
D:Check subnet service endpoints and authorize a storage request from that subnet directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether storage firewall VNet rule or service endpoint configuration is missing.
Incorrect Answers
A:Test access from allowed and disallowed subnets. This concerns allowing only clients from a designated application subnet. Instead, check subnet service endpoints and authorize a storage request from that subnet.
B:Validate approval and connect to the service private IP. This concerns access a partner's privately published service. Instead, check subnet service endpoints and authorize a storage request from that subnet.
C:Try an external public request and a private endpoint request. This concerns preventing general public data-plane access after private endpoint deployment. Instead, check subnet service endpoints and authorize a storage request from that subnet.
Question 764
A subnet needs a higher-trust path to Azure Storage while retaining the service's public endpoint. During acceptance testing, storage rejects traffic from the new subnet. Which underlying configuration problem best explains the symptom?
- No file subresource private endpoint and matching DNS zone exist
- The client bypassed the certificate's expected service hostname
- Storage firewall VNet rule or service endpoint configuration is missing
- The service public network setting was left open
Explanation
Correct Answer
C:Storage firewall VNet rule or service endpoint configuration is missing explains the observed failure: storage rejects traffic from the new subnet. Correct the design by using enable a Microsoft.Storage virtual network service endpoint, implemented through enable the Storage service endpoint on the subnet and allow the subnet in storage firewall rules.
Incorrect Answers
A:No file subresource private endpoint and matching DNS zone exist. This is relevant when a storage account exposes blob and file services, but only blob has a private endpoint. Here, storage firewall VNet rule or service endpoint configuration is missing.
B:The client bypassed the certificate's expected service hostname. This is relevant when a private endpoint service uses a fqdn required for TLS sni validation. Here, storage firewall VNet rule or service endpoint configuration is missing.
D:The service public network setting was left open. This concerns preventing general public data-plane access after private endpoint deployment. Here, storage firewall VNet rule or service endpoint configuration is missing.
Question 765
A developer thinks Azure service endpoints give a storage account a private address inside the VNet. Which Azure networking design most directly satisfies this requirement?
- Keep the original service hostname while resolving it to the private IP
- Use supported Private Link Service visibility and approval controls
- Choose Private Endpoint rather than service endpoint for private IP requirements
- Explain that service endpoints retain public service FQDNs and IPs
Explanation
Correct Answer
D:Explain that service endpoints retain public service FQDNs and IPs addresses the topology, access or delivery requirement in the scenario. Apply it by enable the subnet service endpoint without creating a private endpoint NIC; confirm by resolve storage hostname and verify service endpoint route behavior.
Incorrect Answers
A:Keep the original service hostname while resolving it to the private IP. This is relevant when a private endpoint service uses a FQDN required for TLS SNI validation. Here, explain that service endpoints retain public service FQDNs and IPs.
B:Use supported Private Link Service visibility and approval controls. This concerns identifying different consumer connections. Here, explain that service endpoints retain public service FQDNs and IPs.
C:Choose Private Endpoint rather than service endpoint for private IP requirements. This concerns all PaaS connections to remain on exclusively private addresses. Here, explain that service endpoints retain public service FQDNs and IPs.
Question 766
A developer thinks Azure service endpoints give a storage account a private address inside the VNet. The architecture uses this design: Explain that service endpoints retain public service FQDNs and IPs. Which configuration should the engineer apply to implement it?
- Create the storage virtual network rule referencing the intended VNet subnet
- Configure the service's approval workflow and authorize named connections
- Enable the subnet service endpoint without creating a private endpoint NIC
- Create the missing private zone link for the second spoke
Explanation
Correct Answer
C:Enable the subnet service endpoint without creating a private endpoint NIC is the operational configuration for explain that service endpoints retain public service fqdns and ips. The acceptance test is to resolve storage hostname and verify service endpoint route behavior.
Incorrect Answers
A:Create the storage virtual network rule referencing the intended VNet subnet is a concrete step for add the subnet to the target storage firewall's allowed networks. Here the selected design is explain that service endpoints retain public service fqdns and ips, which instead requires enable the subnet service endpoint without creating a private endpoint nic.
B:Configure the service's approval workflow and authorize named connections is a concrete step for require manual private endpoint approval and check connection state. Here the selected design is explain that service endpoints retain public service fqdns and ips, which instead requires enable the subnet service endpoint without creating a private endpoint nic.
D:Create the missing private zone link for the second spoke is a concrete step for share its private dns zone with both spokes using vnet links. Here the selected design is explain that service endpoints retain public service fqdns and ips, which instead requires enable the subnet service endpoint without creating a private endpoint nic.
Question 767
A developer thinks Azure service endpoints give a storage account a private address inside the VNet. After the team applies this change—enable the subnet service endpoint without creating a private endpoint NIC—which validation best proves the intended result?
- Try an external public request and a private endpoint request
- Resolve storage hostname and verify service endpoint route behavior
- Retry storage operations from the approved subnet
- Validate approval and connect to the service private IP
Explanation
Correct Answer
B:Resolve storage hostname and verify service endpoint route behavior directly checks whether the intended outcome occurs, not merely whether a resource exists. If the check fails, investigate whether service endpoints do not allocate private endpoint IPs.
Incorrect Answers
A:Try an external public request and a private endpoint request. This concerns preventing general public data-plane access after private endpoint deployment. Instead, resolve storage hostname and verify service endpoint route behavior.
C:Retry storage operations from the approved subnet. This is relevant when a subnet's service endpoint setting exists but storage traffic is still rejected. Instead, resolve storage hostname and verify service endpoint route behavior.
D:Validate approval and connect to the service private IP. This concerns access a partner's privately published service. Instead, resolve storage hostname and verify service endpoint route behavior.
Question 768
A developer thinks Azure service endpoints give a storage account a private address inside the VNet. During acceptance testing, a private IP does not appear in the storage client subnet. Which underlying configuration problem best explains the symptom?
- Service endpoints do not allocate private endpoint IPs
- The service public network setting was left open
- The client bypassed the certificate's expected service hostname
- The private link connection request is still Pending
Explanation
Correct Answer
A:Service endpoints do not allocate private endpoint IPs explains the observed failure: a private IP does not appear in the storage client subnet. Correct the design by using explain that service endpoints retain public service FQDNs and IPs, implemented through enable the subnet service endpoint without creating a private endpoint NIC.
Incorrect Answers
B:The service public network setting was left open. This concerns preventing general public data-plane access after private endpoint deployment. Here, service endpoints do not allocate private endpoint IPs.
C:The client bypassed the certificate's expected service hostname. This is relevant when a private endpoint service uses a fqdn required for TLS sni validation. Here, service endpoints do not allocate private endpoint IPs.
D:The private link connection request is still Pending. This is relevant when a storage private endpoint has been created but remains pending approval. Here, service endpoints do not allocate private endpoint IPs.
Question 769
A storage firewall must allow only clients from a designated application subnet. Which Azure networking design most directly satisfies this requirement?
- Publish the service through Azure Private Link Service
- Add the subnet to the target storage firewall's allowed networks
- Use service endpoint-based virtual network access rules on the storage account
- Ensure hub-spoke routing and DNS are valid for the endpoint's private IP
Explanation
Correct Answer
C:Use service endpoint-based virtual network access rules on the storage account addresses the topology, access or delivery requirement in the scenario. Apply it by enable service endpoint and add the specific subnet to allowed network rules; confirm by test access from allowed and disallowed subnets.
Incorrect Answers
A:Publish the service through Azure Private Link Service. This concerns a vendor provides a custom Azure service behind its own internal Standard Load Balancer. Instead, use service endpoint-based virtual network access rules on the storage account.
B:Add the subnet to the target storage firewall's allowed networks. This is relevant when a subnet's service endpoint setting exists but storage traffic is still rejected. Instead, use service endpoint-based virtual network access rules on the storage account.
D:Ensure hub-spoke routing and DNS are valid for the endpoint's private IP. This concerns being accessed from hub workloads. Instead, use service endpoint-based virtual network access rules on the storage account.
Question 770
A storage firewall must allow only clients from a designated application subnet. The architecture uses this design: Use service endpoint-based virtual network access rules on the storage account. Which configuration should the engineer apply to implement it?
- Create the private endpoint and DNS integration, then restrict public access
- Enable service endpoint and add the specific subnet to allowed network rules
- Add the vault private endpoint and appropriate private DNS zone group
- Create private endpoint connection to the SQL server and approve it
Explanation
Correct Answer
B:Enable service endpoint and add the specific subnet to allowed network rules is the operational configuration for use service endpoint-based virtual network access rules on the storage account. The acceptance test is to test access from allowed and disallowed subnets.
Incorrect Answers
A:Create the private endpoint and DNS integration, then restrict public access is a concrete step for choose private endpoint rather than service endpoint for private ip requirements. Here the selected design is use service endpoint-based virtual network access rules on the storage account, which instead requires enable service endpoint and add the specific subnet to allowed network rules.
C:Add the vault private endpoint and appropriate private DNS zone group is a concrete step for create an azure key vault private endpoint and restrict public network access. Here the selected design is use service endpoint-based virtual network access rules on the storage account, which instead requires enable service endpoint and add the specific subnet to allowed network rules.
D:Create private endpoint connection to the SQL server and approve it is a concrete step for use an azure sql database private endpoint with correct subresource. Here the selected design is use service endpoint-based virtual network access rules on the storage account, which instead requires enable service endpoint and add the specific subnet to allowed network rules.
Designing and Implementing Microsoft Azure Networking Solutions (AZ-700) Practice Tests