100% Latest & Updated Network Appliance NS0-165 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 400
A multi-tenant cluster uses a common IPspace even though tenants require independent networking and route isolation. Choose THREE measures that together implement and verify a suitable solution for this ONTAP storage-administration situation. (Choose THREE.)
- Inspect cluster ring membership and quorum status while reviewing a controlled network-partition simulation.
- Check SVM and LIF membership and test reachability from the appropriate tenant network for each overlapped prefix.
- Review iSCSI target and route configuration when introducing new initiator subnets.
- Configure supported IPspaces to separate routing and broadcast domains for overlapping or isolated tenant networks.
- Review IPspace membership and routing boundaries whenever new SVMs or tenant networks are added.
- Align broadcast domains with actual layer-two reachability and assign valid LIF failover targets.
Explanation
Correct Answers
B:Check SVM and LIF membership and test reachability from the appropriate tenant network for each overlapped prefix. An ONTAP IPspace defines network separation that can distinguish identical addresses in different tenant contexts.
D:Configure supported IPspaces to separate routing and broadcast domains for overlapping or isolated tenant networks. An ONTAP IPspace defines network separation that can distinguish identical addresses in different tenant contexts. Incorrect IPspace design can route client traffic to the wrong tenant or prevent access entirely.
E:Review IPspace membership and routing boundaries whenever new SVMs or tenant networks are added. Incorrect IPspace design can route client traffic to the wrong tenant or prevent access entirely.
Incorrect Answers
A:Inspect cluster ring membership and quorum status while reviewing a controlled network-partition simulation. It tests cluster quorum and epsilon decision safety, not ontap ipspaces and tenant routing separation.
C:Review iSCSI target and route configuration when introducing new initiator subnets. It tests iscsi svm lif target connectivity design, not ontap ipspaces and tenant routing separation.
F:Align broadcast domains with actual layer-two reachability and assign valid LIF failover targets. An ONTAP IPspace defines network separation that can distinguish identical addresses in different tenant contexts.
Question 401
A NAS LIF is assigned to a broadcast domain containing switch ports that cannot reach the application's client VLAN. Which design choice most directly meets the stated requirement?
- Diagnose ONTAP data LIF operational status, assigned home port, failover state, and underlying physical link before changing configuration.
- Verify SVM DNS, required SRV records, domain controller reachability and client name resolution before modifying SMB storage.
- Align broadcast domains with actual layer-two reachability and assign valid LIF failover targets.
- Align MTU settings end to end across ONTAP interfaces, switch ports, and clients for networks using jumbo frames.
Explanation
Correct Answer
C:Align broadcast domains with actual layer-two reachability and assign valid LIF failover targets. Broadcast domains group ONTAP ports with shared network reachability; incorrect grouping invalidates LIF mobility assumptions. A LIF may fail over to a physically healthy but unreachable port, causing client outage.
Incorrect Answers
A:Diagnose ONTAP data LIF operational status, assigned home port, failover state, and underlying physical link before changing configuration. Broadcast domains group ONTAP ports with shared network reachability; incorrect grouping invalidates LIF mobility assumptions.
B:Verify SVM DNS, required SRV records, domain controller reachability and client name resolution before modifying SMB storage. Broadcast domains group ONTAP ports with shared network reachability; incorrect grouping invalidates LIF mobility assumptions.
D:Align MTU settings end to end across ONTAP interfaces, switch ports, and clients for networks using jumbo frames. Broadcast domains group ONTAP ports with shared network reachability; incorrect grouping invalidates LIF mobility assumptions.
Question 402
A NAS LIF is assigned to a broadcast domain containing switch ports that cannot reach the application's client VLAN. Which evidence would BEST validate the intended outcome?
- Perform controlled name lookups and SMB session tests from both the SVM and a representative Windows client.
- Compare LIF operational status and current port against client reachability and a safe interface migration test.
- Test bidirectional intercluster connectivity and verify peer health rather than testing only management addresses.
- Use a controlled LIF move and verify ARP, subnet connectivity and correct port selection from an affected client.
Explanation
Correct Answer
D:Use a controlled LIF move and verify ARP, subnet connectivity and correct port selection from an affected client. Broadcast domains group ONTAP ports with shared network reachability; incorrect grouping invalidates LIF mobility assumptions.
Incorrect Answers
A:Perform controlled name lookups and SMB session tests from both the SVM and a representative Windows client. It tests dns and name service failure in smb client access, not broadcast domains and lif failover targets.
B:Compare LIF operational status and current port against client reachability and a safe interface migration test. It tests diagnosing a down lif versus a down physical port, not broadcast domains and lif failover targets.
C:Test bidirectional intercluster connectivity and verify peer health rather than testing only management addresses. It tests intercluster lif reachability and peer troubleshooting, not broadcast domains and lif failover targets.
Question 403
A NAS LIF is assigned to a broadcast domain containing switch ports that cannot reach the application's client VLAN. What is the principal technical reason for the problem?
- Replication traffic commonly uses dedicated intercluster interfaces and policies separate from management access.
- Broadcast domains group ONTAP ports with shared network reachability; incorrect grouping invalidates LIF mobility assumptions.
- A packet larger than any unsupported hop's MTU can fail even when basic network reachability looks normal.
- Logical interface state and placement determine client reachability independently of disk and filesystem health.
Explanation
Correct Answer
B:Broadcast domains group ONTAP ports with shared network reachability; incorrect grouping invalidates LIF mobility assumptions. A LIF may fail over to a physically healthy but unreachable port, causing client outage.
Incorrect Answers
A:Replication traffic commonly uses dedicated intercluster interfaces and policies separate from management access. This explains intercluster lif reachability and peer troubleshooting; it does not describe the limiting mechanism in broadcast domains and lif failover targets presented by the scenario.
C:A packet larger than any unsupported hop's MTU can fail even when basic network reachability looks normal. This explains mtu inconsistency and jumbo-frame packet loss; it does not describe the limiting mechanism in broadcast domains and lif failover targets presented by the scenario.
D:Logical interface state and placement determine client reachability independently of disk and filesystem health. This explains diagnosing a down lif versus a down physical port; it does not describe the limiting mechanism in broadcast domains and lif failover targets presented by the scenario.
Question 404
A NAS LIF is assigned to a broadcast domain containing switch ports that cannot reach the application's client VLAN. Which preventive measure should be monitored as the platform changes?
- Retest broadcast domain reachability after switch reconfiguration or cable moves.
- Include switch counters and transceiver health in storage network performance baselines.
- Document MTU baselines and test the full path after switches or VLANs are changed.
- Retest DNS and domain controller settings when SVMs or client subnets change.
Explanation
Correct Answer
A:Retest broadcast domain reachability after switch reconfiguration or cable moves. A LIF may fail over to a physically healthy but unreachable port, causing client outage.
Incorrect Answers
B:Include switch counters and transceiver health in storage network performance baselines.
C:Document MTU baselines and test the full path after switches or VLANs are changed. It tests mtu inconsistency and jumbo-frame packet loss, not broadcast domains and lif failover targets.
D:Retest DNS and domain controller settings when SVMs or client subnets change. It tests dns and name service failure in smb client access, not broadcast domains and lif failover targets.
Question 405
A NAS LIF is assigned to a broadcast domain containing switch ports that cannot reach the application's client VLAN. Which adverse outcome is the MOST direct risk if the issue persists?
- Ignoring faulty Ethernet links can create persistent latency spikes and repeat client disconnects.
- A LIF may fail over to a physically healthy but unreachable port, causing client outage.
- Misdiagnosing LIF failure as storage loss can cause unnecessary disruption and extend an avoidable network outage.
- An unchecked replication path can silently leave disaster recovery relationships unable to update.
Explanation
Correct Answer
B:A LIF may fail over to a physically healthy but unreachable port, causing client outage. This is a directly relevant trust, availability, cost, privacy, or data-quality consequence of broadcast domains and lif failover targets. Underlying mechanism: Broadcast domains group ONTAP ports with shared network reachability; incorrect grouping invalidates LIF mobility assumptions.
Incorrect Answers
A:Ignoring faulty Ethernet links can create persistent latency spikes and repeat client disconnects.
C:Misdiagnosing LIF failure as storage loss can cause unnecessary disruption and extend an avoidable network outage.
D:An unchecked replication path can silently leave disaster recovery relationships unable to update.
Question 406
A network change moves a physical port but leaves its ONTAP broadcast domain membership incorrect, breaking failover. Which change should the team prioritize for this specific ONTAP workload?
- Align broadcast domains with actual layer-two reachability and assign valid LIF failover targets.
- Diagnose ONTAP data LIF operational status, assigned home port, failover state, and underlying physical link before changing configuration.
- Verify SVM DNS, required SRV records, domain controller reachability and client name resolution before modifying SMB storage.
- Align MTU settings end to end across ONTAP interfaces, switch ports, and clients for networks using jumbo frames.
Explanation
Correct Answer
A:Align broadcast domains with actual layer-two reachability and assign valid LIF failover targets. Broadcast domains group ONTAP ports with shared network reachability; incorrect grouping invalidates LIF mobility assumptions. A LIF may fail over to a physically healthy but unreachable port, causing client outage.
Incorrect Answers
B:Diagnose ONTAP data LIF operational status, assigned home port, failover state, and underlying physical link before changing configuration. Broadcast domains group ONTAP ports with shared network reachability; incorrect grouping invalidates LIF mobility assumptions.
C:Verify SVM DNS, required SRV records, domain controller reachability and client name resolution before modifying SMB storage. Broadcast domains group ONTAP ports with shared network reachability; incorrect grouping invalidates LIF mobility assumptions.
D:Align MTU settings end to end across ONTAP interfaces, switch ports, and clients for networks using jumbo frames. Broadcast domains group ONTAP ports with shared network reachability; incorrect grouping invalidates LIF mobility assumptions.
Question 407
A network change moves a physical port but leaves its ONTAP broadcast domain membership incorrect, breaking failover. Which test would most directly confirm the solution?
- Test bidirectional intercluster connectivity and verify peer health rather than testing only management addresses.
- Use a controlled LIF move and verify ARP, subnet connectivity and correct port selection from an affected client.
- Perform controlled name lookups and SMB session tests from both the SVM and a representative Windows client.
- Compare LIF operational status and current port against client reachability and a safe interface migration test.
Explanation
Correct Answer
B:Use a controlled LIF move and verify ARP, subnet connectivity and correct port selection from an affected client. Broadcast domains group ONTAP ports with shared network reachability; incorrect grouping invalidates LIF mobility assumptions.
Incorrect Answers
A:Test bidirectional intercluster connectivity and verify peer health rather than testing only management addresses. It tests intercluster lif reachability and peer troubleshooting, not broadcast domains and lif failover targets.
C:Perform controlled name lookups and SMB session tests from both the SVM and a representative Windows client. It tests dns and name service failure in smb client access, not broadcast domains and lif failover targets.
D:Compare LIF operational status and current port against client reachability and a safe interface migration test. It tests diagnosing a down lif versus a down physical port, not broadcast domains and lif failover targets.
Question 408
A network change moves a physical port but leaves its ONTAP broadcast domain membership incorrect, breaking failover. Why is the original assumption unreliable?
- Replication traffic commonly uses dedicated intercluster interfaces and policies separate from management access.
- Broadcast domains group ONTAP ports with shared network reachability; incorrect grouping invalidates LIF mobility assumptions.
- Logical interface state and placement determine client reachability independently of disk and filesystem health.
- A packet larger than any unsupported hop's MTU can fail even when basic network reachability looks normal.
Explanation
Correct Answer
B:Broadcast domains group ONTAP ports with shared network reachability; incorrect grouping invalidates LIF mobility assumptions. A LIF may fail over to a physically healthy but unreachable port, causing client outage.
Incorrect Answers
A:Replication traffic commonly uses dedicated intercluster interfaces and policies separate from management access. This explains intercluster lif reachability and peer troubleshooting; it does not describe the limiting mechanism in broadcast domains and lif failover targets presented by the scenario.
C:Logical interface state and placement determine client reachability independently of disk and filesystem health. This explains diagnosing a down lif versus a down physical port; it does not describe the limiting mechanism in broadcast domains and lif failover targets presented by the scenario.
D:A packet larger than any unsupported hop's MTU can fail even when basic network reachability looks normal. This explains mtu inconsistency and jumbo-frame packet loss; it does not describe the limiting mechanism in broadcast domains and lif failover targets presented by the scenario.
Question 409
A network change moves a physical port but leaves its ONTAP broadcast domain membership incorrect, breaking failover. Which preventive measure should be monitored as the platform changes?
- Include switch counters and transceiver health in storage network performance baselines.
- Retest broadcast domain reachability after switch reconfiguration or cable moves.
- Retest DNS and domain controller settings when SVMs or client subnets change.
- Document MTU baselines and test the full path after switches or VLANs are changed.
Explanation
Correct Answer
B:Retest broadcast domain reachability after switch reconfiguration or cable moves. A LIF may fail over to a physically healthy but unreachable port, causing client outage.
Incorrect Answers
A:Include switch counters and transceiver health in storage network performance baselines.
C:Retest DNS and domain controller settings when SVMs or client subnets change. It tests dns and name service failure in smb client access, not broadcast domains and lif failover targets.
D:Document MTU baselines and test the full path after switches or VLANs are changed. It tests mtu inconsistency and jumbo-frame packet loss, not broadcast domains and lif failover targets.
Question 410
A network change moves a physical port but leaves its ONTAP broadcast domain membership incorrect, breaking failover. Which adverse outcome is the MOST direct risk if the issue persists?
- Misdiagnosing LIF failure as storage loss can cause unnecessary disruption and extend an avoidable network outage.
- Ignoring faulty Ethernet links can create persistent latency spikes and repeat client disconnects.
- A LIF may fail over to a physically healthy but unreachable port, causing client outage.
- An unchecked replication path can silently leave disaster recovery relationships unable to update.
Explanation
Correct Answer
C:A LIF may fail over to a physically healthy but unreachable port, causing client outage. This is a directly relevant trust, availability, cost, privacy, or data-quality consequence of broadcast domains and lif failover targets. Underlying mechanism: Broadcast domains group ONTAP ports with shared network reachability; incorrect grouping invalidates LIF mobility assumptions.
Incorrect Answers
A:Misdiagnosing LIF failure as storage loss can cause unnecessary disruption and extend an avoidable network outage.
B:Ignoring faulty Ethernet links can create persistent latency spikes and repeat client disconnects.
D:An unchecked replication path can silently leave disaster recovery relationships unable to update.
NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests