Network Appliance NS0-165 Exam Dumps, Practice Test Questions

100% Latest & Updated Network Appliance NS0-165 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Network Appliance NS0-165  Premium File
$76.99
$69.99

NS0-165 Premium File

  • Premium File: 60 Questions & Answers. Last update: Nov 12, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

NS0-165 Premium File

Network Appliance NS0-165  Premium File
  • Premium File: 60 Questions & Answers. Last update: Nov 12, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$76.99
$69.99

Network Appliance NS0-165 Practice Test 42

Question 410

A network change moves a physical port but leaves its ONTAP broadcast domain membership incorrect, breaking failover. Which adverse outcome is the MOST direct risk if the issue persists?

  1. Misdiagnosing LIF failure as storage loss can cause unnecessary disruption and extend an avoidable network outage.
  2. Ignoring faulty Ethernet links can create persistent latency spikes and repeat client disconnects.
  3. A LIF may fail over to a physically healthy but unreachable port, causing client outage.
  4. An unchecked replication path can silently leave disaster recovery relationships unable to update.

Explanation

Correct Answer

C:

A LIF may fail over to a physically healthy but unreachable port, causing client outage. This is a directly relevant trust, availability, cost, privacy, or data-quality consequence of broadcast domains and lif failover targets. Underlying mechanism: Broadcast domains group ONTAP ports with shared network reachability; incorrect grouping invalidates LIF mobility assumptions.

Incorrect Answers

A:

Misdiagnosing LIF failure as storage loss can cause unnecessary disruption and extend an avoidable network outage.

B:

Ignoring faulty Ethernet links can create persistent latency spikes and repeat client disconnects.

D:

An unchecked replication path can silently leave disaster recovery relationships unable to update.

Question 411

A cluster uses one untagged port for two isolated customer VLANs and access conflicts after the switch activates tagging. What is the MOST appropriate solution under these constraints?

  1. Align MTU settings end to end across ONTAP interfaces, switch ports, and clients for networks using jumbo frames.
  2. Configure ONTAP VLAN interfaces with matching switch trunk permissions and client subnet design.
  3. Inspect ONTAP and switch port speed, link errors, flow control and aggregation member health before retuning storage workloads.
  4. Verify SVM DNS, required SRV records, domain controller reachability and client name resolution before modifying SMB storage.

Explanation

Correct Answer

B:

Configure ONTAP VLAN interfaces with matching switch trunk permissions and client subnet design. Tagged VLAN subinterfaces are usable only when the physical switching fabric carries the same logical network. A VLAN mismatch can silently isolate client data services while physical link LEDs remain green.

Incorrect Answers

A:

Align MTU settings end to end across ONTAP interfaces, switch ports, and clients for networks using jumbo frames. Tagged VLAN subinterfaces are usable only when the physical switching fabric carries the same logical network.

C:

Inspect ONTAP and switch port speed, link errors, flow control and aggregation member health before retuning storage workloads. Tagged VLAN subinterfaces are usable only when the physical switching fabric carries the same logical network.

D:

Verify SVM DNS, required SRV records, domain controller reachability and client name resolution before modifying SMB storage. Tagged VLAN subinterfaces are usable only when the physical switching fabric carries the same logical network.

Question 412

A cluster uses one untagged port for two isolated customer VLANs and access conflicts after the switch activates tagging. What observable result would establish that the requirement is met?

  1. Test bidirectional intercluster connectivity and verify peer health rather than testing only management addresses.
  2. Compare LIF operational status and current port against client reachability and a safe interface migration test.
  3. Inspect interface tags and switch-port configuration and test end-to-end connectivity using the intended VLAN.
  4. Test path MTU and sustained large I/O while inspecting drops and fragmentation counters on every affected hop.

Explanation

Correct Answer

C:

Inspect interface tags and switch-port configuration and test end-to-end connectivity using the intended VLAN. Tagged VLAN subinterfaces are usable only when the physical switching fabric carries the same logical network.

Incorrect Answers

A:

Test bidirectional intercluster connectivity and verify peer health rather than testing only management addresses. It tests intercluster lif reachability and peer troubleshooting, not vlan interfaces for shared physical uplinks.

B:

Compare LIF operational status and current port against client reachability and a safe interface migration test. It tests diagnosing a down lif versus a down physical port, not vlan interfaces for shared physical uplinks.

D:

Test path MTU and sustained large I/O while inspecting drops and fragmentation counters on every affected hop.

Question 413

A cluster uses one untagged port for two isolated customer VLANs and access conflicts after the switch activates tagging. Which underlying distinction BEST explains this failure?

  1. A packet larger than any unsupported hop's MTU can fail even when basic network reachability looks normal.
  2. Logical interface state and placement determine client reachability independently of disk and filesystem health.
  3. Physical-layer negotiation and packet corruption can constrain client I/O independently of volume placement and cache.
  4. Tagged VLAN subinterfaces are usable only when the physical switching fabric carries the same logical network.

Explanation

Correct Answer

D:

Tagged VLAN subinterfaces are usable only when the physical switching fabric carries the same logical network. A VLAN mismatch can silently isolate client data services while physical link LEDs remain green.

Incorrect Answers

A:

A packet larger than any unsupported hop's MTU can fail even when basic network reachability looks normal. This explains mtu inconsistency and jumbo-frame packet loss; it does not describe the limiting mechanism in vlan interfaces for shared physical uplinks presented by the scenario.

B:

Logical interface state and placement determine client reachability independently of disk and filesystem health. This explains diagnosing a down lif versus a down physical port; it does not describe the limiting mechanism in vlan interfaces for shared physical uplinks presented by the scenario.

C:

Physical-layer negotiation and packet corruption can constrain client I/O independently of volume placement and cache. This explains port negotiation errors and uneven network throughput; it does not describe the limiting mechanism in vlan interfaces for shared physical uplinks presented by the scenario.

Question 414

A cluster uses one untagged port for two isolated customer VLANs and access conflicts after the switch activates tagging. What control should remain in place after implementing the fix?

  1. Include switch counters and transceiver health in storage network performance baselines.
  2. Keep peer connectivity acceptance tests in site change and firewall review procedures.
  3. Maintain switch and ONTAP VLAN configuration parity during port moves and network upgrades.
  4. Add LIF status and failover-target checks to standard network incident triage.

Explanation

Correct Answer

C:

Maintain switch and ONTAP VLAN configuration parity during port moves and network upgrades. A VLAN mismatch can silently isolate client data services while physical link LEDs remain green.

Incorrect Answers

A:

Include switch counters and transceiver health in storage network performance baselines. It tests port negotiation errors and uneven network throughput, not vlan interfaces for shared physical uplinks.

B:

Keep peer connectivity acceptance tests in site change and firewall review procedures. It tests intercluster lif reachability and peer troubleshooting, not vlan interfaces for shared physical uplinks.

D:

Add LIF status and failover-target checks to standard network incident triage.

Question 415

A cluster uses one untagged port for two isolated customer VLANs and access conflicts after the switch activates tagging. Which result would BEST describe the business or technical exposure?

  1. Ignoring faulty Ethernet links can create persistent latency spikes and repeat client disconnects.
  2. A stale DNS or directory record can look like storage unavailability while the underlying data remains intact.
  3. An unchecked replication path can silently leave disaster recovery relationships unable to update.
  4. A VLAN mismatch can silently isolate client data services while physical link LEDs remain green.

Explanation

Correct Answer

D:

A VLAN mismatch can silently isolate client data services while physical link LEDs remain green. This is a directly relevant trust, availability, cost, privacy, or data-quality consequence of vlan interfaces for shared physical uplinks. Underlying mechanism: Tagged VLAN subinterfaces are usable only when the physical switching fabric carries the same logical network.

Incorrect Answers

A:

Ignoring faulty Ethernet links can create persistent latency spikes and repeat client disconnects. It tests port negotiation errors and uneven network throughput, not vlan interfaces for shared physical uplinks and produces a different.

B:

A stale DNS or directory record can look like storage unavailability while the underlying data remains intact. It tests dns and name service failure in smb client access, not vlan interfaces for shared physical uplinks and produces a different.

C:

An unchecked replication path can silently leave disaster recovery relationships unable to update. It tests intercluster lif reachability and peer troubleshooting, not vlan interfaces for shared physical uplinks and produces a different.

Question 416

An administrator creates an ONTAP VLAN interface but the switch trunk does not permit the corresponding VLAN tag. What infrastructure or software action BEST resolves the stated issue?

  1. Align MTU settings end to end across ONTAP interfaces, switch ports, and clients for networks using jumbo frames.
  2. Inspect ONTAP and switch port speed, link errors, flow control and aggregation member health before retuning storage workloads.
  3. Configure ONTAP VLAN interfaces with matching switch trunk permissions and client subnet design.
  4. Verify SVM DNS, required SRV records, domain controller reachability and client name resolution before modifying SMB storage.

Explanation

Correct Answer

C:

Configure ONTAP VLAN interfaces with matching switch trunk permissions and client subnet design. Tagged VLAN subinterfaces are usable only when the physical switching fabric carries the same logical network. A VLAN mismatch can silently isolate client data services while physical link LEDs remain green.

Incorrect Answers

A:

Align MTU settings end to end across ONTAP interfaces, switch ports, and clients for networks using jumbo frames. Tagged VLAN subinterfaces are usable only when the physical switching fabric carries the same logical network.

B:

Inspect ONTAP and switch port speed, link errors, flow control and aggregation member health before retuning storage workloads. Tagged VLAN subinterfaces are usable only when the physical switching fabric carries the same logical network.

D:

Verify SVM DNS, required SRV records, domain controller reachability and client name resolution before modifying SMB storage. Tagged VLAN subinterfaces are usable only when the physical switching fabric carries the same logical network.

Question 417

An administrator creates an ONTAP VLAN interface but the switch trunk does not permit the corresponding VLAN tag. How should the team verify that the corrective action works?

  1. Compare LIF operational status and current port against client reachability and a safe interface migration test.
  2. Test path MTU and sustained large I/O while inspecting drops and fragmentation counters on every affected hop.
  3. Inspect interface tags and switch-port configuration and test end-to-end connectivity using the intended VLAN.
  4. Test bidirectional intercluster connectivity and verify peer health rather than testing only management addresses.

Explanation

Correct Answer

C:

Inspect interface tags and switch-port configuration and test end-to-end connectivity using the intended VLAN. Tagged VLAN subinterfaces are usable only when the physical switching fabric carries the same logical network.

Incorrect Answers

A:

Compare LIF operational status and current port against client reachability and a safe interface migration test. It tests diagnosing a down lif versus a down physical port, not vlan interfaces for shared physical uplinks.

B:

Test path MTU and sustained large I/O while inspecting drops and fragmentation counters on every affected hop.

D:

Test bidirectional intercluster connectivity and verify peer health rather than testing only management addresses. It tests intercluster lif reachability and peer troubleshooting, not vlan interfaces for shared physical uplinks.

Question 418

An administrator creates an ONTAP VLAN interface but the switch trunk does not permit the corresponding VLAN tag. Which concept is MOST relevant to the stated conditions?

  1. Physical-layer negotiation and packet corruption can constrain client I/O independently of volume placement and cache.
  2. Logical interface state and placement determine client reachability independently of disk and filesystem health.
  3. A packet larger than any unsupported hop's MTU can fail even when basic network reachability looks normal.
  4. Tagged VLAN subinterfaces are usable only when the physical switching fabric carries the same logical network.

Explanation

Correct Answer

D:

Tagged VLAN subinterfaces are usable only when the physical switching fabric carries the same logical network. A VLAN mismatch can silently isolate client data services while physical link LEDs remain green.

Incorrect Answers

A:

Physical-layer negotiation and packet corruption can constrain client I/O independently of volume placement and cache. This explains port negotiation errors and uneven network throughput; it does not describe the limiting mechanism in vlan interfaces for shared physical uplinks presented by the scenario.

B:

Logical interface state and placement determine client reachability independently of disk and filesystem health. This explains diagnosing a down lif versus a down physical port; it does not describe the limiting mechanism in vlan interfaces for shared physical uplinks presented by the scenario.

C:

A packet larger than any unsupported hop's MTU can fail even when basic network reachability looks normal. This explains mtu inconsistency and jumbo-frame packet loss; it does not describe the limiting mechanism in vlan interfaces for shared physical uplinks presented by the scenario.

Question 419

An administrator creates an ONTAP VLAN interface but the switch trunk does not permit the corresponding VLAN tag. What control should remain in place after implementing the fix?

  1. Keep peer connectivity acceptance tests in site change and firewall review procedures.
  2. Include switch counters and transceiver health in storage network performance baselines.
  3. Maintain switch and ONTAP VLAN configuration parity during port moves and network upgrades.
  4. Add LIF status and failover-target checks to standard network incident triage.

Explanation

Correct Answer

C:

Maintain switch and ONTAP VLAN configuration parity during port moves and network upgrades. A VLAN mismatch can silently isolate client data services while physical link LEDs remain green.

Incorrect Answers

A:

Keep peer connectivity acceptance tests in site change and firewall review procedures. It tests intercluster lif reachability and peer troubleshooting, not vlan interfaces for shared physical uplinks.

B:

Include switch counters and transceiver health in storage network performance baselines. It tests port negotiation errors and uneven network throughput, not vlan interfaces for shared physical uplinks.

D:

Add LIF status and failover-target checks to standard network incident triage.

Question 420

An administrator creates an ONTAP VLAN interface but the switch trunk does not permit the corresponding VLAN tag. Choose TWO measures that together implement and verify a suitable solution for this ONTAP storage-administration situation. (Choose TWO.)

  1. Inspect aggregate capacity, disk configuration and volume placement while replaying representative growth and access.
  2. Inspect interface tags and switch-port configuration and test end-to-end connectivity using the intended VLAN.
  3. Version API calls and validate them after ONTAP upgrades, retaining least-privilege service accounts.
  4. Choose supported ONTAP interface group mode and switch configuration based on redundancy and traffic distribution needs.
  5. Configure ONTAP VLAN interfaces with matching switch trunk permissions and client subnet design.

Explanation

Correct Answers

B:

Inspect interface tags and switch-port configuration and test end-to-end connectivity using the intended VLAN. Tagged VLAN subinterfaces are usable only when the physical switching fabric carries the same logical network.

E:

Configure ONTAP VLAN interfaces with matching switch trunk permissions and client subnet design. Tagged VLAN subinterfaces are usable only when the physical switching fabric carries the same logical network. A VLAN mismatch can silently isolate client data services while physical link LEDs remain green.

Incorrect Answers

A:

Inspect aggregate capacity, disk configuration and volume placement while replaying representative growth and access. It tests aggregate and local tier capacity placement, not vlan interfaces for shared physical uplinks.

C:

Version API calls and validate them after ONTAP upgrades, retaining least-privilege service accounts.

D:

Choose supported ONTAP interface group mode and switch configuration based on redundancy and traffic distribution needs. Tagged VLAN subinterfaces are usable only when the physical switching fabric carries the same logical network.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.