100% Latest & Updated Network Appliance NS0-165 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 420
An administrator creates an ONTAP VLAN interface but the switch trunk does not permit the corresponding VLAN tag. Choose TWO measures that together implement and verify a suitable solution for this ONTAP storage-administration situation. (Choose TWO.)
- Inspect aggregate capacity, disk configuration and volume placement while replaying representative growth and access.
- Inspect interface tags and switch-port configuration and test end-to-end connectivity using the intended VLAN.
- Version API calls and validate them after ONTAP upgrades, retaining least-privilege service accounts.
- Choose supported ONTAP interface group mode and switch configuration based on redundancy and traffic distribution needs.
- Configure ONTAP VLAN interfaces with matching switch trunk permissions and client subnet design.
Explanation
Correct Answers
B:Inspect interface tags and switch-port configuration and test end-to-end connectivity using the intended VLAN. Tagged VLAN subinterfaces are usable only when the physical switching fabric carries the same logical network.
E:Configure ONTAP VLAN interfaces with matching switch trunk permissions and client subnet design. Tagged VLAN subinterfaces are usable only when the physical switching fabric carries the same logical network. A VLAN mismatch can silently isolate client data services while physical link LEDs remain green.
Incorrect Answers
A:Inspect aggregate capacity, disk configuration and volume placement while replaying representative growth and access. It tests aggregate and local tier capacity placement, not vlan interfaces for shared physical uplinks.
C:Version API calls and validate them after ONTAP upgrades, retaining least-privilege service accounts.
D:Choose supported ONTAP interface group mode and switch configuration based on redundancy and traffic distribution needs. Tagged VLAN subinterfaces are usable only when the physical switching fabric carries the same logical network.
Question 421
An administrator builds a link aggregation group across incompatible switch ports that do not share the required LACP configuration. Which change should the team prioritize for this specific ONTAP workload?
- Inspect ONTAP and switch port speed, link errors, flow control and aggregation member health before retuning storage workloads.
- Align MTU settings end to end across ONTAP interfaces, switch ports, and clients for networks using jumbo frames.
- Diagnose ONTAP data LIF operational status, assigned home port, failover state, and underlying physical link before changing configuration.
- Choose supported ONTAP interface group mode and switch configuration based on redundancy and traffic distribution needs.
Explanation
Correct Answer
D:Choose supported ONTAP interface group mode and switch configuration based on redundancy and traffic distribution needs. Link aggregation behavior depends on matching switch and controller modes and does not guarantee one flow uses all links. An invalid interface group can drop clients or leave expensive network ports idle.
Incorrect Answers
A:Inspect ONTAP and switch port speed, link errors, flow control and aggregation member health before retuning storage workloads. Link aggregation behavior depends on matching switch and controller modes and does not guarantee one flow uses all links.
B:Align MTU settings end to end across ONTAP interfaces, switch ports, and clients for networks using jumbo frames. Link aggregation behavior depends on matching switch and controller modes and does not guarantee one flow uses all links.
C:Diagnose ONTAP data LIF operational status, assigned home port, failover state, and underlying physical link before changing configuration. Link aggregation behavior depends on matching switch and controller modes and does not guarantee one flow uses all links.
Question 422
An administrator builds a link aggregation group across incompatible switch ports that do not share the required LACP configuration. Which test would most directly confirm the solution?
- Test bidirectional intercluster connectivity and verify peer health rather than testing only management addresses.
- Compare error rates and measured throughput before and after a controlled cable or transceiver correction.
- Check LACP state, member health, traffic balance, and connectivity after a controlled member failure.
- Perform controlled name lookups and SMB session tests from both the SVM and a representative Windows client.
Explanation
Correct Answer
C:Check LACP state, member health, traffic balance, and connectivity after a controlled member failure. Link aggregation behavior depends on matching switch and controller modes and does not guarantee one flow uses all links.
Incorrect Answers
A:Test bidirectional intercluster connectivity and verify peer health rather than testing only management addresses. It tests intercluster lif reachability and peer troubleshooting, not interface groups and resilient ethernet uplinks.
B:Compare error rates and measured throughput before and after a controlled cable or transceiver correction.
D:Perform controlled name lookups and SMB session tests from both the SVM and a representative Windows client. It tests dns and name service failure in smb client access, not interface groups and resilient ethernet uplinks.
Question 423
An administrator builds a link aggregation group across incompatible switch ports that do not share the required LACP configuration. Why is the original assumption unreliable?
- Logical interface state and placement determine client reachability independently of disk and filesystem health.
- SMB protocol access relies on accurate name services and directory discovery as well as available NAS volumes.
- Link aggregation behavior depends on matching switch and controller modes and does not guarantee one flow uses all links.
- Replication traffic commonly uses dedicated intercluster interfaces and policies separate from management access.
Explanation
Correct Answer
C:Link aggregation behavior depends on matching switch and controller modes and does not guarantee one flow uses all links. An invalid interface group can drop clients or leave expensive network ports idle.
Incorrect Answers
A:Logical interface state and placement determine client reachability independently of disk and filesystem health. This explains diagnosing a down lif versus a down physical port; it does not describe the limiting mechanism in interface groups and resilient ethernet uplinks presented by the scenario.
B:SMB protocol access relies on accurate name services and directory discovery as well as available NAS volumes. This explains dns and name service failure in smb client access; it does not describe the limiting mechanism in interface groups and resilient ethernet uplinks presented by the scenario.
D:Replication traffic commonly uses dedicated intercluster interfaces and policies separate from management access. This explains intercluster lif reachability and peer troubleshooting; it does not describe the limiting mechanism in interface groups and resilient ethernet uplinks presented by the scenario.
Question 424
An administrator builds a link aggregation group across incompatible switch ports that do not share the required LACP configuration. Which ongoing practice would BEST prevent recurrence?
- Document MTU baselines and test the full path after switches or VLANs are changed.
- Audit port-group configuration and distribution after switch firmware or topology changes.
- Include switch counters and transceiver health in storage network performance baselines.
- Retest DNS and domain controller settings when SVMs or client subnets change.
Explanation
Correct Answer
B:Audit port-group configuration and distribution after switch firmware or topology changes. An invalid interface group can drop clients or leave expensive network ports idle.
Incorrect Answers
A:Document MTU baselines and test the full path after switches or VLANs are changed. It tests mtu inconsistency and jumbo-frame packet loss, not interface groups and resilient ethernet uplinks.
C:Include switch counters and transceiver health in storage network performance baselines. It tests port negotiation errors and uneven network throughput, not interface groups and resilient ethernet uplinks.
D:Retest DNS and domain controller settings when SVMs or client subnets change. It tests dns and name service failure in smb client access, not interface groups and resilient ethernet uplinks.
Question 425
An administrator builds a link aggregation group across incompatible switch ports that do not share the required LACP configuration. What failure consequence should the organization prioritize?
- Misdiagnosing LIF failure as storage loss can cause unnecessary disruption and extend an avoidable network outage.
- A stale DNS or directory record can look like storage unavailability while the underlying data remains intact.
- An invalid interface group can drop clients or leave expensive network ports idle.
- An unchecked replication path can silently leave disaster recovery relationships unable to update.
Explanation
Correct Answer
C:An invalid interface group can drop clients or leave expensive network ports idle. This is a directly relevant trust, availability, cost, privacy, or data-quality consequence of interface groups and resilient ethernet uplinks. Underlying mechanism: Link aggregation behavior depends on matching switch and controller modes and does not guarantee one flow uses all links.
Incorrect Answers
A:Misdiagnosing LIF failure as storage loss can cause unnecessary disruption and extend an avoidable network outage. It tests diagnosing a down lif versus a down physical port, not interface groups and resilient ethernet uplinks and produces a different.
B:A stale DNS or directory record can look like storage unavailability while the underlying data remains intact.
D:An unchecked replication path can silently leave disaster recovery relationships unable to update. It tests intercluster lif reachability and peer troubleshooting, not interface groups and resilient ethernet uplinks and produces a different.
Question 426
A controller sends high network throughput through one uplink although a supported redundant port group is available. Which design choice most directly meets the stated requirement?
- Choose supported ONTAP interface group mode and switch configuration based on redundancy and traffic distribution needs.
- Align MTU settings end to end across ONTAP interfaces, switch ports, and clients for networks using jumbo frames.
- Inspect ONTAP and switch port speed, link errors, flow control and aggregation member health before retuning storage workloads.
- Diagnose ONTAP data LIF operational status, assigned home port, failover state, and underlying physical link before changing configuration.
Explanation
Correct Answer
A:Choose supported ONTAP interface group mode and switch configuration based on redundancy and traffic distribution needs. Link aggregation behavior depends on matching switch and controller modes and does not guarantee one flow uses all links. An invalid interface group can drop clients or leave expensive network ports idle.
Incorrect Answers
B:Align MTU settings end to end across ONTAP interfaces, switch ports, and clients for networks using jumbo frames. Link aggregation behavior depends on matching switch and controller modes and does not guarantee one flow uses all links.
C:Inspect ONTAP and switch port speed, link errors, flow control and aggregation member health before retuning storage workloads. Link aggregation behavior depends on matching switch and controller modes and does not guarantee one flow uses all links.
D:Diagnose ONTAP data LIF operational status, assigned home port, failover state, and underlying physical link before changing configuration. Link aggregation behavior depends on matching switch and controller modes and does not guarantee one flow uses all links.
Question 427
A controller sends high network throughput through one uplink although a supported redundant port group is available. Which evidence would BEST validate the intended outcome?
- Test bidirectional intercluster connectivity and verify peer health rather than testing only management addresses.
- Check LACP state, member health, traffic balance, and connectivity after a controlled member failure.
- Compare error rates and measured throughput before and after a controlled cable or transceiver correction.
- Perform controlled name lookups and SMB session tests from both the SVM and a representative Windows client.
Explanation
Correct Answer
B:Check LACP state, member health, traffic balance, and connectivity after a controlled member failure. Link aggregation behavior depends on matching switch and controller modes and does not guarantee one flow uses all links.
Incorrect Answers
A:Test bidirectional intercluster connectivity and verify peer health rather than testing only management addresses. It tests intercluster lif reachability and peer troubleshooting, not interface groups and resilient ethernet uplinks.
C:Compare error rates and measured throughput before and after a controlled cable or transceiver correction.
D:Perform controlled name lookups and SMB session tests from both the SVM and a representative Windows client. It tests dns and name service failure in smb client access, not interface groups and resilient ethernet uplinks.
Question 428
A controller sends high network throughput through one uplink although a supported redundant port group is available. What is the principal technical reason for the problem?
- Replication traffic commonly uses dedicated intercluster interfaces and policies separate from management access.
- Physical-layer negotiation and packet corruption can constrain client I/O independently of volume placement and cache.
- SMB protocol access relies on accurate name services and directory discovery as well as available NAS volumes.
- Link aggregation behavior depends on matching switch and controller modes and does not guarantee one flow uses all links.
Explanation
Correct Answer
D:Link aggregation behavior depends on matching switch and controller modes and does not guarantee one flow uses all links. An invalid interface group can drop clients or leave expensive network ports idle.
Incorrect Answers
A:Replication traffic commonly uses dedicated intercluster interfaces and policies separate from management access. This explains intercluster lif reachability and peer troubleshooting; it does not describe the limiting mechanism in interface groups and resilient ethernet uplinks presented by the scenario.
B:Physical-layer negotiation and packet corruption can constrain client I/O independently of volume placement and cache. This explains port negotiation errors and uneven network throughput; it does not describe the limiting mechanism in interface groups and resilient ethernet uplinks presented by the scenario.
C:SMB protocol access relies on accurate name services and directory discovery as well as available NAS volumes. This explains dns and name service failure in smb client access; it does not describe the limiting mechanism in interface groups and resilient ethernet uplinks presented by the scenario.
Question 429
A controller sends high network throughput through one uplink although a supported redundant port group is available. Which ongoing practice would BEST prevent recurrence?
- Retest DNS and domain controller settings when SVMs or client subnets change.
- Audit port-group configuration and distribution after switch firmware or topology changes.
- Document MTU baselines and test the full path after switches or VLANs are changed.
- Include switch counters and transceiver health in storage network performance baselines.
Explanation
Correct Answer
B:Audit port-group configuration and distribution after switch firmware or topology changes. An invalid interface group can drop clients or leave expensive network ports idle.
Incorrect Answers
A:Retest DNS and domain controller settings when SVMs or client subnets change. It tests dns and name service failure in smb client access, not interface groups and resilient ethernet uplinks.
C:Document MTU baselines and test the full path after switches or VLANs are changed. It tests mtu inconsistency and jumbo-frame packet loss, not interface groups and resilient ethernet uplinks.
D:Include switch counters and transceiver health in storage network performance baselines. It tests port negotiation errors and uneven network throughput, not interface groups and resilient ethernet uplinks.
Question 430
A controller sends high network throughput through one uplink although a supported redundant port group is available. What failure consequence should the organization prioritize?
- An invalid interface group can drop clients or leave expensive network ports idle.
- Misdiagnosing LIF failure as storage loss can cause unnecessary disruption and extend an avoidable network outage.
- A stale DNS or directory record can look like storage unavailability while the underlying data remains intact.
- An unchecked replication path can silently leave disaster recovery relationships unable to update.
Explanation
Correct Answer
A:An invalid interface group can drop clients or leave expensive network ports idle. This is a directly relevant trust, availability, cost, privacy, or data-quality consequence of interface groups and resilient ethernet uplinks. Underlying mechanism: Link aggregation behavior depends on matching switch and controller modes and does not guarantee one flow uses all links.
Incorrect Answers
B:Misdiagnosing LIF failure as storage loss can cause unnecessary disruption and extend an avoidable network outage. It tests diagnosing a down lif versus a down physical port, not interface groups and resilient ethernet uplinks and produces a different.
C:A stale DNS or directory record can look like storage unavailability while the underlying data remains intact.
D:An unchecked replication path can silently leave disaster recovery relationships unable to update. It tests intercluster lif reachability and peer troubleshooting, not interface groups and resilient ethernet uplinks and produces a different.
NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests