100% Latest & Updated Network Appliance NS0-165 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 430
A controller sends high network throughput through one uplink although a supported redundant port group is available. What failure consequence should the organization prioritize?
- An invalid interface group can drop clients or leave expensive network ports idle.
- Misdiagnosing LIF failure as storage loss can cause unnecessary disruption and extend an avoidable network outage.
- A stale DNS or directory record can look like storage unavailability while the underlying data remains intact.
- An unchecked replication path can silently leave disaster recovery relationships unable to update.
Explanation
Correct Answer
A:An invalid interface group can drop clients or leave expensive network ports idle. This is a directly relevant trust, availability, cost, privacy, or data-quality consequence of interface groups and resilient ethernet uplinks. Underlying mechanism: Link aggregation behavior depends on matching switch and controller modes and does not guarantee one flow uses all links.
Incorrect Answers
B:Misdiagnosing LIF failure as storage loss can cause unnecessary disruption and extend an avoidable network outage. It tests diagnosing a down lif versus a down physical port, not interface groups and resilient ethernet uplinks and produces a different.
C:A stale DNS or directory record can look like storage unavailability while the underlying data remains intact.
D:An unchecked replication path can silently leave disaster recovery relationships unable to update. It tests intercluster lif reachability and peer troubleshooting, not interface groups and resilient ethernet uplinks and produces a different.
Question 431
A SnapMirror session between sites cannot establish because its intercluster LIF traffic lacks a valid return route. What infrastructure or software action BEST resolves the stated issue?
- Align MTU settings end to end across ONTAP interfaces, switch ports, and clients for networks using jumbo frames.
- Check intercluster LIFs, routing, name resolution and required peer ports using the exact source and destination data path.
- Configure ONTAP routes and gateways per IPspace and intended management, data, or replication interfaces.
- Diagnose ONTAP data LIF operational status, assigned home port, failover state, and underlying physical link before changing configuration.
Explanation
Correct Answer
C:Configure ONTAP routes and gateways per IPspace and intended management, data, or replication interfaces. Storage network connections need valid forward and return paths in the correct routing context. Missing return routes can appear as protocol authentication failures or timeouts despite healthy storage volumes.
Incorrect Answers
A:Align MTU settings end to end across ONTAP interfaces, switch ports, and clients for networks using jumbo frames. Storage network connections need valid forward and return paths in the correct routing context.
B:Check intercluster LIFs, routing, name resolution and required peer ports using the exact source and destination data path. Storage network connections need valid forward and return paths in the correct routing context.
D:Diagnose ONTAP data LIF operational status, assigned home port, failover state, and underlying physical link before changing configuration. Storage network connections need valid forward and return paths in the correct routing context.
Question 432
A SnapMirror session between sites cannot establish because its intercluster LIF traffic lacks a valid return route. How should the team verify that the corrective action works?
- Test bidirectional intercluster connectivity and verify peer health rather than testing only management addresses.
- Compare LIF operational status and current port against client reachability and a safe interface migration test.
- Compare error rates and measured throughput before and after a controlled cable or transceiver correction.
- Trace both directions of the expected connection and inspect routing table and interface source selection.
Explanation
Correct Answer
D:Trace both directions of the expected connection and inspect routing table and interface source selection. Storage network connections need valid forward and return paths in the correct routing context.
Incorrect Answers
A:Test bidirectional intercluster connectivity and verify peer health rather than testing only management addresses. It tests intercluster lif reachability and peer troubleshooting, not route tables and intercluster replication paths.
B:Compare LIF operational status and current port against client reachability and a safe interface migration test. It tests diagnosing a down lif versus a down physical port, not route tables and intercluster replication paths.
C:Compare error rates and measured throughput before and after a controlled cable or transceiver correction. It tests port negotiation errors and uneven network throughput, not route tables and intercluster replication paths.
Question 433
A SnapMirror session between sites cannot establish because its intercluster LIF traffic lacks a valid return route. Which concept is MOST relevant to the stated conditions?
- SMB protocol access relies on accurate name services and directory discovery as well as available NAS volumes.
- Replication traffic commonly uses dedicated intercluster interfaces and policies separate from management access.
- Storage network connections need valid forward and return paths in the correct routing context.
- A packet larger than any unsupported hop's MTU can fail even when basic network reachability looks normal.
Explanation
Correct Answer
C:Storage network connections need valid forward and return paths in the correct routing context. Missing return routes can appear as protocol authentication failures or timeouts despite healthy storage volumes.
Incorrect Answers
A:SMB protocol access relies on accurate name services and directory discovery as well as available NAS volumes. This explains dns and name service failure in smb client access; it does not describe the limiting mechanism in route tables and intercluster replication paths presented by the scenario.
B:Replication traffic commonly uses dedicated intercluster interfaces and policies separate from management access. This explains intercluster lif reachability and peer troubleshooting; it does not describe the limiting mechanism in route tables and intercluster replication paths presented by the scenario.
D:A packet larger than any unsupported hop's MTU can fail even when basic network reachability looks normal. This explains mtu inconsistency and jumbo-frame packet loss; it does not describe the limiting mechanism in route tables and intercluster replication paths presented by the scenario.
Question 434
A SnapMirror session between sites cannot establish because its intercluster LIF traffic lacks a valid return route. Which preventive measure should be monitored as the platform changes?
- Retest DNS and domain controller settings when SVMs or client subnets change.
- Document MTU baselines and test the full path after switches or VLANs are changed.
- Keep peer connectivity acceptance tests in site change and firewall review procedures.
- Revalidate site-to-site routes and firewall permits when adding replication targets or IPspaces.
Explanation
Correct Answer
D:Revalidate site-to-site routes and firewall permits when adding replication targets or IPspaces. Missing return routes can appear as protocol authentication failures or timeouts despite healthy storage volumes.
Incorrect Answers
A:Retest DNS and domain controller settings when SVMs or client subnets change. It tests dns and name service failure in smb client access, not route tables and intercluster replication paths.
B:Document MTU baselines and test the full path after switches or VLANs are changed. It tests mtu inconsistency and jumbo-frame packet loss, not route tables and intercluster replication paths.
C:Keep peer connectivity acceptance tests in site change and firewall review procedures. It tests intercluster lif reachability and peer troubleshooting, not route tables and intercluster replication paths.
Question 435
A SnapMirror session between sites cannot establish because its intercluster LIF traffic lacks a valid return route. Which adverse outcome is the MOST direct risk if the issue persists?
- Missing return routes can appear as protocol authentication failures or timeouts despite healthy storage volumes.
- Misdiagnosing LIF failure as storage loss can cause unnecessary disruption and extend an avoidable network outage.
- A stale DNS or directory record can look like storage unavailability while the underlying data remains intact.
- Partial jumbo-frame configuration can produce intermittent protocol stalls and poor replication throughput.
Explanation
Correct Answer
A:Missing return routes can appear as protocol authentication failures or timeouts despite healthy storage volumes. This is a directly relevant trust, availability, cost, privacy, or data-quality consequence of route tables and intercluster replication paths. Underlying mechanism: Storage network connections need valid forward and return paths in the correct routing context.
Incorrect Answers
B:Misdiagnosing LIF failure as storage loss can cause unnecessary disruption and extend an avoidable network outage. It tests diagnosing a down lif versus a down physical port, not route tables and intercluster replication paths and produces a different.
C:A stale DNS or directory record can look like storage unavailability while the underlying data remains intact. It tests dns and name service failure in smb client access, not route tables and intercluster replication paths and produces a different.
D:Partial jumbo-frame configuration can produce intermittent protocol stalls and poor replication throughput.
Question 436
A multi-subnet storage cluster places management and data service routes in the wrong IPspace. What is the MOST appropriate solution under these constraints?
- Check intercluster LIFs, routing, name resolution and required peer ports using the exact source and destination data path.
- Diagnose ONTAP data LIF operational status, assigned home port, failover state, and underlying physical link before changing configuration.
- Configure ONTAP routes and gateways per IPspace and intended management, data, or replication interfaces.
- Align MTU settings end to end across ONTAP interfaces, switch ports, and clients for networks using jumbo frames.
Explanation
Correct Answer
C:Configure ONTAP routes and gateways per IPspace and intended management, data, or replication interfaces. Storage network connections need valid forward and return paths in the correct routing context. Missing return routes can appear as protocol authentication failures or timeouts despite healthy storage volumes.
Incorrect Answers
A:Check intercluster LIFs, routing, name resolution and required peer ports using the exact source and destination data path. Storage network connections need valid forward and return paths in the correct routing context.
B:Diagnose ONTAP data LIF operational status, assigned home port, failover state, and underlying physical link before changing configuration. Storage network connections need valid forward and return paths in the correct routing context.
D:Align MTU settings end to end across ONTAP interfaces, switch ports, and clients for networks using jumbo frames. Storage network connections need valid forward and return paths in the correct routing context.
Question 437
A multi-subnet storage cluster places management and data service routes in the wrong IPspace. What observable result would establish that the requirement is met?
- Compare LIF operational status and current port against client reachability and a safe interface migration test.
- Perform controlled name lookups and SMB session tests from both the SVM and a representative Windows client.
- Trace both directions of the expected connection and inspect routing table and interface source selection.
- Test bidirectional intercluster connectivity and verify peer health rather than testing only management addresses.
Explanation
Correct Answer
C:Trace both directions of the expected connection and inspect routing table and interface source selection. Storage network connections need valid forward and return paths in the correct routing context.
Incorrect Answers
A:Compare LIF operational status and current port against client reachability and a safe interface migration test. It tests diagnosing a down lif versus a down physical port, not route tables and intercluster replication paths.
B:Perform controlled name lookups and SMB session tests from both the SVM and a representative Windows client. It tests dns and name service failure in smb client access, not route tables and intercluster replication paths.
D:Test bidirectional intercluster connectivity and verify peer health rather than testing only management addresses. It tests intercluster lif reachability and peer troubleshooting, not route tables and intercluster replication paths.
Question 438
A multi-subnet storage cluster places management and data service routes in the wrong IPspace. Which underlying distinction BEST explains this failure?
- Replication traffic commonly uses dedicated intercluster interfaces and policies separate from management access.
- Storage network connections need valid forward and return paths in the correct routing context.
- SMB protocol access relies on accurate name services and directory discovery as well as available NAS volumes.
- A packet larger than any unsupported hop's MTU can fail even when basic network reachability looks normal.
Explanation
Correct Answer
B:Storage network connections need valid forward and return paths in the correct routing context. Missing return routes can appear as protocol authentication failures or timeouts despite healthy storage volumes.
Incorrect Answers
A:Replication traffic commonly uses dedicated intercluster interfaces and policies separate from management access. This explains intercluster lif reachability and peer troubleshooting; it does not describe the limiting mechanism in route tables and intercluster replication paths presented by the scenario.
C:SMB protocol access relies on accurate name services and directory discovery as well as available NAS volumes. This explains dns and name service failure in smb client access; it does not describe the limiting mechanism in route tables and intercluster replication paths presented by the scenario.
D:A packet larger than any unsupported hop's MTU can fail even when basic network reachability looks normal. This explains mtu inconsistency and jumbo-frame packet loss; it does not describe the limiting mechanism in route tables and intercluster replication paths presented by the scenario.
Question 439
A multi-subnet storage cluster places management and data service routes in the wrong IPspace. Which preventive measure should be monitored as the platform changes?
- Retest DNS and domain controller settings when SVMs or client subnets change.
- Revalidate site-to-site routes and firewall permits when adding replication targets or IPspaces.
- Document MTU baselines and test the full path after switches or VLANs are changed.
- Keep peer connectivity acceptance tests in site change and firewall review procedures.
Explanation
Correct Answer
B:Revalidate site-to-site routes and firewall permits when adding replication targets or IPspaces. Missing return routes can appear as protocol authentication failures or timeouts despite healthy storage volumes.
Incorrect Answers
A:Retest DNS and domain controller settings when SVMs or client subnets change. It tests dns and name service failure in smb client access, not route tables and intercluster replication paths.
C:Document MTU baselines and test the full path after switches or VLANs are changed. It tests mtu inconsistency and jumbo-frame packet loss, not route tables and intercluster replication paths.
D:Keep peer connectivity acceptance tests in site change and firewall review procedures. It tests intercluster lif reachability and peer troubleshooting, not route tables and intercluster replication paths.
Question 440
A multi-subnet storage cluster places management and data service routes in the wrong IPspace. Choose TWO measures that together implement and verify a suitable solution for this ONTAP storage-administration situation. (Choose TWO.)
- Inspect SVM peer state and establish a test replication relationship with the approved source and destination.
- Configure supported IPspaces to separate routing and broadcast domains for overlapping or isolated tenant networks.
- Trace both directions of the expected connection and inspect routing table and interface source selection.
- Revalidate SVM DR readiness after tenant, domain, or protocol changes.
- Configure ONTAP routes and gateways per IPspace and intended management, data, or replication interfaces.
Explanation
Correct Answers
C:Trace both directions of the expected connection and inspect routing table and interface source selection. Storage network connections need valid forward and return paths in the correct routing context.
E:Configure ONTAP routes and gateways per IPspace and intended management, data, or replication interfaces. Storage network connections need valid forward and return paths in the correct routing context. Missing return routes can appear as protocol authentication failures or timeouts despite healthy storage volumes.
Incorrect Answers
A:Inspect SVM peer state and establish a test replication relationship with the approved source and destination. It tests svm peering for cross-cluster replication, not route tables and intercluster replication paths.
B:Configure supported IPspaces to separate routing and broadcast domains for overlapping or isolated tenant networks. Storage network connections need valid forward and return paths in the correct routing context.
D:Revalidate SVM DR readiness after tenant, domain, or protocol changes. It tests snapmirror svm dr and application namespace recovery, not route tables and intercluster replication paths.
NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests