100% Latest & Updated Network Appliance NS0-165 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 460
A storage operator replaces cabling because the IP address is unreachable without checking whether the LIF migrated to another port. Choose TWO measures that together implement and verify a suitable solution for this ONTAP storage-administration situation. (Choose TWO.)
- Test authorized client access, identity integration, latency, and documented protection behavior on a representative managed volume.
- Compare LIF operational status and current port against client reachability and a safe interface migration test.
- Diagnose ONTAP data LIF operational status, assigned home port, failover state, and underlying physical link before changing configuration.
- Inspect ONTAP and switch port speed, link errors, flow control and aggregation member health before retuning storage workloads.
- Maintain baseline client and protocol latency and failover tests following network upgrades.
Explanation
Correct Answers
B:Compare LIF operational status and current port against client reachability and a safe interface migration test. Logical interface state and placement determine client reachability independently of disk and filesystem health.
C:Diagnose ONTAP data LIF operational status, assigned home port, failover state, and underlying physical link before changing configuration. Logical interface state and placement determine client reachability independently of disk and filesystem health. Misdiagnosing LIF failure as storage loss can cause unnecessary disruption and extend an avoidable network outage.
Incorrect Answers
A:Test authorized client access, identity integration, latency, and documented protection behavior on a representative managed volume. It tests google cloud netapp volumes managed nfs and smb, not diagnosing a down lif versus a down physical port.
D:Inspect ONTAP and switch port speed, link errors, flow control and aggregation member health before retuning storage workloads. Logical interface state and placement determine client reachability independently of disk and filesystem health.
E:Maintain baseline client and protocol latency and failover tests following network upgrades. It tests nas latency and session instability diagnosis, not diagnosing a down lif versus a down physical port.
Question 461
Windows clients can reach the SMB server by IP but fail by hostname after a DNS record change. Which change should the team prioritize for this specific ONTAP workload?
- Align broadcast domains with actual layer-two reachability and assign valid LIF failover targets.
- Separate supported cluster, node-management, SVM-management, and data traffic roles according to NetApp topology guidance.
- Verify SVM DNS, required SRV records, domain controller reachability and client name resolution before modifying SMB storage.
- Configure ONTAP VLAN interfaces with matching switch trunk permissions and client subnet design.
Explanation
Correct Answer
C:Verify SVM DNS, required SRV records, domain controller reachability and client name resolution before modifying SMB storage. SMB protocol access relies on accurate name services and directory discovery as well as available NAS volumes. A stale DNS or directory record can look like storage unavailability while the underlying data remains intact.
Incorrect Answers
A:Align broadcast domains with actual layer-two reachability and assign valid LIF failover targets. SMB protocol access relies on accurate name services and directory discovery as well as available NAS volumes.
B:Separate supported cluster, node-management, SVM-management, and data traffic roles according to NetApp topology guidance. SMB protocol access relies on accurate name services and directory discovery as well as available NAS volumes.
D:Configure ONTAP VLAN interfaces with matching switch trunk permissions and client subnet design. SMB protocol access relies on accurate name services and directory discovery as well as available NAS volumes.
Question 462
Windows clients can reach the SMB server by IP but fail by hostname after a DNS record change. Which test would most directly confirm the solution?
- Check SVM and LIF membership and test reachability from the appropriate tenant network for each overlapped prefix.
- Perform controlled name lookups and SMB session tests from both the SVM and a representative Windows client.
- Check LACP state, member health, traffic balance, and connectivity after a controlled member failure.
- Use a controlled LIF move and verify ARP, subnet connectivity and correct port selection from an affected client.
Explanation
Correct Answer
B:Perform controlled name lookups and SMB session tests from both the SVM and a representative Windows client. SMB protocol access relies on accurate name services and directory discovery as well as available NAS volumes.
Incorrect Answers
A:Check SVM and LIF membership and test reachability from the appropriate tenant network for each overlapped prefix. It tests ontap ipspaces and tenant routing separation, not dns and name service.
C:Check LACP state, member health, traffic balance, and connectivity after a controlled member failure.
D:Use a controlled LIF move and verify ARP, subnet connectivity and correct port selection from an affected client. It tests broadcast domains and lif failover targets, not dns and name service.
Question 463
Windows clients can reach the SMB server by IP but fail by hostname after a DNS record change. Why is the original assumption unreliable?
- Link aggregation behavior depends on matching switch and controller modes and does not guarantee one flow uses all links.
- ONTAP uses distinct network traffic classes whose failure domains and performance needs are not interchangeable.
- An ONTAP IPspace defines network separation that can distinguish identical addresses in different tenant contexts.
- SMB protocol access relies on accurate name services and directory discovery as well as available NAS volumes.
Explanation
Correct Answer
D:SMB protocol access relies on accurate name services and directory discovery as well as available NAS volumes. A stale DNS or directory record can look like storage unavailability while the underlying data remains intact.
Incorrect Answers
A:Link aggregation behavior depends on matching switch and controller modes and does not guarantee one flow uses all links. This explains interface groups and resilient ethernet uplinks; it does not describe the limiting mechanism in dns and name service failure in smb client access presented by the scenario.
B:ONTAP uses distinct network traffic classes whose failure domains and performance needs are not interchangeable. This explains dedicated cluster and management network roles; it does not describe the limiting mechanism in dns and name service failure in smb client access presented by the scenario.
C:An ONTAP IPspace defines network separation that can distinguish identical addresses in different tenant contexts. This explains ontap ipspaces and tenant routing separation; it does not describe the limiting mechanism in dns and name service failure in smb client access presented by the scenario.
Question 464
Windows clients can reach the SMB server by IP but fail by hostname after a DNS record change. Which preventive measure should be monitored as the platform changes?
- Maintain network-role diagrams and update monitoring after controller replacements or fabric changes.
- Retest DNS and domain controller settings when SVMs or client subnets change.
- Retest broadcast domain reachability after switch reconfiguration or cable moves.
- Review IPspace membership and routing boundaries whenever new SVMs or tenant networks are added.
Explanation
Correct Answer
B:Retest DNS and domain controller settings when SVMs or client subnets change. A stale DNS or directory record can look like storage unavailability while the underlying data remains intact.
Incorrect Answers
A:Maintain network-role diagrams and update monitoring after controller replacements or fabric changes. It tests dedicated cluster and management network roles, not dns and name service.
C:Retest broadcast domain reachability after switch reconfiguration or cable moves.
D:Review IPspace membership and routing boundaries whenever new SVMs or tenant networks are added.
Question 465
Windows clients can reach the SMB server by IP but fail by hostname after a DNS record change. Which adverse outcome is the MOST direct risk if the issue persists?
- A VLAN mismatch can silently isolate client data services while physical link LEDs remain green.
- Missing return routes can appear as protocol authentication failures or timeouts despite healthy storage volumes.
- A stale DNS or directory record can look like storage unavailability while the underlying data remains intact.
- Conflating traffic planes can prevent cluster coordination or isolate management during client-network congestion.
Explanation
Correct Answer
C:A stale DNS or directory record can look like storage unavailability while the underlying data remains intact. This is a directly relevant trust, availability, cost, privacy, or data-quality consequence of dns and name service failure in smb client access. Underlying mechanism: SMB protocol access relies on accurate name services and directory discovery as well as available NAS volumes.
Incorrect Answers
A:A VLAN mismatch can silently isolate client data services while physical link LEDs remain green.
B:Missing return routes can appear as protocol authentication failures or timeouts despite healthy storage volumes.
D:Conflating traffic planes can prevent cluster coordination or isolate management during client-network congestion.
Question 466
An SVM's CIFS name resolution points to old domain controllers following an Active Directory site migration. Which design choice most directly meets the stated requirement?
- Verify SVM DNS, required SRV records, domain controller reachability and client name resolution before modifying SMB storage.
- Configure ONTAP VLAN interfaces with matching switch trunk permissions and client subnet design.
- Separate supported cluster, node-management, SVM-management, and data traffic roles according to NetApp topology guidance.
- Align broadcast domains with actual layer-two reachability and assign valid LIF failover targets.
Explanation
Correct Answer
A:Verify SVM DNS, required SRV records, domain controller reachability and client name resolution before modifying SMB storage. SMB protocol access relies on accurate name services and directory discovery as well as available NAS volumes. A stale DNS or directory record can look like storage unavailability while the underlying data remains intact.
Incorrect Answers
B:Configure ONTAP VLAN interfaces with matching switch trunk permissions and client subnet design. SMB protocol access relies on accurate name services and directory discovery as well as available NAS volumes.
C:Separate supported cluster, node-management, SVM-management, and data traffic roles according to NetApp topology guidance. SMB protocol access relies on accurate name services and directory discovery as well as available NAS volumes.
D:Align broadcast domains with actual layer-two reachability and assign valid LIF failover targets. SMB protocol access relies on accurate name services and directory discovery as well as available NAS volumes.
Question 467
An SVM's CIFS name resolution points to old domain controllers following an Active Directory site migration. Which evidence would BEST validate the intended outcome?
- Check SVM and LIF membership and test reachability from the appropriate tenant network for each overlapped prefix.
- Use a controlled LIF move and verify ARP, subnet connectivity and correct port selection from an affected client.
- Check LACP state, member health, traffic balance, and connectivity after a controlled member failure.
- Perform controlled name lookups and SMB session tests from both the SVM and a representative Windows client.
Explanation
Correct Answer
D:Perform controlled name lookups and SMB session tests from both the SVM and a representative Windows client. SMB protocol access relies on accurate name services and directory discovery as well as available NAS volumes.
Incorrect Answers
A:Check SVM and LIF membership and test reachability from the appropriate tenant network for each overlapped prefix. It tests ontap ipspaces and tenant routing separation, not dns and name service.
B:Use a controlled LIF move and verify ARP, subnet connectivity and correct port selection from an affected client. It tests broadcast domains and lif failover targets, not dns and name service.
C:Check LACP state, member health, traffic balance, and connectivity after a controlled member failure.
Question 468
An SVM's CIFS name resolution points to old domain controllers following an Active Directory site migration. What is the principal technical reason for the problem?
- Tagged VLAN subinterfaces are usable only when the physical switching fabric carries the same logical network.
- SMB protocol access relies on accurate name services and directory discovery as well as available NAS volumes.
- Link aggregation behavior depends on matching switch and controller modes and does not guarantee one flow uses all links.
- An ONTAP IPspace defines network separation that can distinguish identical addresses in different tenant contexts.
Explanation
Correct Answer
B:SMB protocol access relies on accurate name services and directory discovery as well as available NAS volumes. A stale DNS or directory record can look like storage unavailability while the underlying data remains intact.
Incorrect Answers
A:Tagged VLAN subinterfaces are usable only when the physical switching fabric carries the same logical network. This explains vlan interfaces for shared physical uplinks; it does not describe the limiting mechanism in dns and name service failure in smb client access presented by the scenario.
C:Link aggregation behavior depends on matching switch and controller modes and does not guarantee one flow uses all links. This explains interface groups and resilient ethernet uplinks; it does not describe the limiting mechanism in dns and name service failure in smb client access presented by the scenario.
D:An ONTAP IPspace defines network separation that can distinguish identical addresses in different tenant contexts. This explains ontap ipspaces and tenant routing separation; it does not describe the limiting mechanism in dns and name service failure in smb client access presented by the scenario.
Question 469
An SVM's CIFS name resolution points to old domain controllers following an Active Directory site migration. Which preventive measure should be monitored as the platform changes?
- Review IPspace membership and routing boundaries whenever new SVMs or tenant networks are added.
- Retest DNS and domain controller settings when SVMs or client subnets change.
- Maintain network-role diagrams and update monitoring after controller replacements or fabric changes.
- Retest broadcast domain reachability after switch reconfiguration or cable moves.
Explanation
Correct Answer
B:Retest DNS and domain controller settings when SVMs or client subnets change. A stale DNS or directory record can look like storage unavailability while the underlying data remains intact.
Incorrect Answers
A:Review IPspace membership and routing boundaries whenever new SVMs or tenant networks are added.
C:Maintain network-role diagrams and update monitoring after controller replacements or fabric changes. It tests dedicated cluster and management network roles, not dns and name service.
D:Retest broadcast domain reachability after switch reconfiguration or cable moves.
Question 470
An SVM's CIFS name resolution points to old domain controllers following an Active Directory site migration. Which adverse outcome is the MOST direct risk if the issue persists?
- Missing return routes can appear as protocol authentication failures or timeouts despite healthy storage volumes.
- A VLAN mismatch can silently isolate client data services while physical link LEDs remain green.
- A stale DNS or directory record can look like storage unavailability while the underlying data remains intact.
- An invalid interface group can drop clients or leave expensive network ports idle.
Explanation
Correct Answer
C:A stale DNS or directory record can look like storage unavailability while the underlying data remains intact. This is a directly relevant trust, availability, cost, privacy, or data-quality consequence of dns and name service failure in smb client access. Underlying mechanism: SMB protocol access relies on accurate name services and directory discovery as well as available NAS volumes.
Incorrect Answers
A:Missing return routes can appear as protocol authentication failures or timeouts despite healthy storage volumes.
B:A VLAN mismatch can silently isolate client data services while physical link LEDs remain green.
D:An invalid interface group can drop clients or leave expensive network ports idle. It tests interface groups and resilient ethernet uplinks, not dns and name service.
NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests