100% Latest & Updated Network Appliance NS0-165 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 470
An SVM's CIFS name resolution points to old domain controllers following an Active Directory site migration. Which adverse outcome is the MOST direct risk if the issue persists?
- Missing return routes can appear as protocol authentication failures or timeouts despite healthy storage volumes.
- A VLAN mismatch can silently isolate client data services while physical link LEDs remain green.
- A stale DNS or directory record can look like storage unavailability while the underlying data remains intact.
- An invalid interface group can drop clients or leave expensive network ports idle.
Explanation
Correct Answer
C:A stale DNS or directory record can look like storage unavailability while the underlying data remains intact. This is a directly relevant trust, availability, cost, privacy, or data-quality consequence of dns and name service failure in smb client access. Underlying mechanism: SMB protocol access relies on accurate name services and directory discovery as well as available NAS volumes.
Incorrect Answers
A:Missing return routes can appear as protocol authentication failures or timeouts despite healthy storage volumes.
B:A VLAN mismatch can silently isolate client data services while physical link LEDs remain green.
D:An invalid interface group can drop clients or leave expensive network ports idle. It tests interface groups and resilient ethernet uplinks, not dns and name service.
Question 471
Large NFS transfers stall intermittently although small pings succeed after a switch path was upgraded to jumbo frames. What infrastructure or software action BEST resolves the stated issue?
- Configure ONTAP routes and gateways per IPspace and intended management, data, or replication interfaces.
- Configure supported IPspaces to separate routing and broadcast domains for overlapping or isolated tenant networks.
- Configure ONTAP VLAN interfaces with matching switch trunk permissions and client subnet design.
- Align MTU settings end to end across ONTAP interfaces, switch ports, and clients for networks using jumbo frames.
Explanation
Correct Answer
D:Align MTU settings end to end across ONTAP interfaces, switch ports, and clients for networks using jumbo frames. A packet larger than any unsupported hop's MTU can fail even when basic network reachability looks normal. Partial jumbo-frame configuration can produce intermittent protocol stalls and poor replication throughput.
Incorrect Answers
A:Configure ONTAP routes and gateways per IPspace and intended management, data, or replication interfaces. A packet larger than any unsupported hop's MTU can fail even when basic network reachability looks normal.
B:Configure supported IPspaces to separate routing and broadcast domains for overlapping or isolated tenant networks. A packet larger than any unsupported hop's MTU can fail even when basic network reachability looks normal.
C:Configure ONTAP VLAN interfaces with matching switch trunk permissions and client subnet design. A packet larger than any unsupported hop's MTU can fail even when basic network reachability looks normal.
Question 472
Large NFS transfers stall intermittently although small pings succeed after a switch path was upgraded to jumbo frames. How should the team verify that the corrective action works?
- Check SVM and LIF membership and test reachability from the appropriate tenant network for each overlapped prefix.
- Use a controlled LIF move and verify ARP, subnet connectivity and correct port selection from an affected client.
- Inspect interface tags and switch-port configuration and test end-to-end connectivity using the intended VLAN.
- Test path MTU and sustained large I/O while inspecting drops and fragmentation counters on every affected hop.
Explanation
Correct Answer
D:Test path MTU and sustained large I/O while inspecting drops and fragmentation counters on every affected hop. A packet larger than any unsupported hop's MTU can fail even when basic network reachability looks normal.
Incorrect Answers
A:Check SVM and LIF membership and test reachability from the appropriate tenant network for each overlapped prefix. It tests ontap ipspaces and tenant routing separation, not mtu inconsistency and jumbo-frame packet loss.
B:Use a controlled LIF move and verify ARP, subnet connectivity and correct port selection from an affected client. It tests broadcast domains and lif failover targets, not mtu inconsistency and jumbo-frame packet loss.
C:Inspect interface tags and switch-port configuration and test end-to-end connectivity using the intended VLAN. It tests vlan interfaces for shared physical uplinks, not mtu inconsistency and jumbo-frame packet loss.
Question 473
Large NFS transfers stall intermittently although small pings succeed after a switch path was upgraded to jumbo frames. Which concept is MOST relevant to the stated conditions?
- Tagged VLAN subinterfaces are usable only when the physical switching fabric carries the same logical network.
- A packet larger than any unsupported hop's MTU can fail even when basic network reachability looks normal.
- Storage network connections need valid forward and return paths in the correct routing context.
- Broadcast domains group ONTAP ports with shared network reachability; incorrect grouping invalidates LIF mobility assumptions.
Explanation
Correct Answer
B:A packet larger than any unsupported hop's MTU can fail even when basic network reachability looks normal. Partial jumbo-frame configuration can produce intermittent protocol stalls and poor replication throughput.
Incorrect Answers
A:Tagged VLAN subinterfaces are usable only when the physical switching fabric carries the same logical network. This explains vlan interfaces for shared physical uplinks; it does not describe the limiting mechanism in mtu inconsistency and jumbo-frame packet loss presented by the scenario.
C:Storage network connections need valid forward and return paths in the correct routing context. This explains route tables and intercluster replication paths; it does not describe the limiting mechanism in mtu inconsistency and jumbo-frame packet loss presented by the scenario.
D:Broadcast domains group ONTAP ports with shared network reachability; incorrect grouping invalidates LIF mobility assumptions. This explains broadcast domains and lif failover targets; it does not describe the limiting mechanism in mtu inconsistency and jumbo-frame packet loss presented by the scenario.
Question 474
Large NFS transfers stall intermittently although small pings succeed after a switch path was upgraded to jumbo frames. What control should remain in place after implementing the fix?
- Maintain network-role diagrams and update monitoring after controller replacements or fabric changes.
- Retest broadcast domain reachability after switch reconfiguration or cable moves.
- Audit port-group configuration and distribution after switch firmware or topology changes.
- Document MTU baselines and test the full path after switches or VLANs are changed.
Explanation
Correct Answer
D:Document MTU baselines and test the full path after switches or VLANs are changed. Partial jumbo-frame configuration can produce intermittent protocol stalls and poor replication throughput.
Incorrect Answers
A:Maintain network-role diagrams and update monitoring after controller replacements or fabric changes. It tests dedicated cluster and management network roles, not mtu inconsistency and jumbo-frame packet loss.
B:Retest broadcast domain reachability after switch reconfiguration or cable moves. It tests broadcast domains and lif failover targets, not mtu inconsistency and jumbo-frame packet loss.
C:Audit port-group configuration and distribution after switch firmware or topology changes.
Question 475
Large NFS transfers stall intermittently although small pings succeed after a switch path was upgraded to jumbo frames. Which result would BEST describe the business or technical exposure?
- An invalid interface group can drop clients or leave expensive network ports idle.
- Conflating traffic planes can prevent cluster coordination or isolate management during client-network congestion.
- Missing return routes can appear as protocol authentication failures or timeouts despite healthy storage volumes.
- Partial jumbo-frame configuration can produce intermittent protocol stalls and poor replication throughput.
Explanation
Correct Answer
D:Partial jumbo-frame configuration can produce intermittent protocol stalls and poor replication throughput. This is a directly relevant trust, availability, cost, privacy, or data-quality consequence of mtu inconsistency and jumbo-frame packet loss. Underlying mechanism: A packet larger than any unsupported hop's MTU can fail even when basic network reachability looks normal.
Incorrect Answers
A:An invalid interface group can drop clients or leave expensive network ports idle. It tests interface groups and resilient ethernet uplinks, not mtu inconsistency and jumbo-frame packet loss and produces a different.
B:Conflating traffic planes can prevent cluster coordination or isolate management during client-network congestion. It tests dedicated cluster and management network roles, not mtu inconsistency and jumbo-frame packet loss and produces a different.
C:Missing return routes can appear as protocol authentication failures or timeouts despite healthy storage volumes. It tests route tables and intercluster replication paths, not mtu inconsistency and jumbo-frame packet loss and produces a different.
Question 476
A replication fabric changes MTU on the controller but not on a transit switch, causing unexpected throughput drops. What is the MOST appropriate solution under these constraints?
- Configure ONTAP routes and gateways per IPspace and intended management, data, or replication interfaces.
- Configure ONTAP VLAN interfaces with matching switch trunk permissions and client subnet design.
- Align MTU settings end to end across ONTAP interfaces, switch ports, and clients for networks using jumbo frames.
- Configure supported IPspaces to separate routing and broadcast domains for overlapping or isolated tenant networks.
Explanation
Correct Answer
C:Align MTU settings end to end across ONTAP interfaces, switch ports, and clients for networks using jumbo frames. A packet larger than any unsupported hop's MTU can fail even when basic network reachability looks normal. Partial jumbo-frame configuration can produce intermittent protocol stalls and poor replication throughput.
Incorrect Answers
A:Configure ONTAP routes and gateways per IPspace and intended management, data, or replication interfaces. A packet larger than any unsupported hop's MTU can fail even when basic network reachability looks normal.
B:Configure ONTAP VLAN interfaces with matching switch trunk permissions and client subnet design. A packet larger than any unsupported hop's MTU can fail even when basic network reachability looks normal.
D:Configure supported IPspaces to separate routing and broadcast domains for overlapping or isolated tenant networks. A packet larger than any unsupported hop's MTU can fail even when basic network reachability looks normal.
Question 477
A replication fabric changes MTU on the controller but not on a transit switch, causing unexpected throughput drops. What observable result would establish that the requirement is met?
- Check SVM and LIF membership and test reachability from the appropriate tenant network for each overlapped prefix.
- Inspect interface tags and switch-port configuration and test end-to-end connectivity using the intended VLAN.
- Use a controlled LIF move and verify ARP, subnet connectivity and correct port selection from an affected client.
- Test path MTU and sustained large I/O while inspecting drops and fragmentation counters on every affected hop.
Explanation
Correct Answer
D:Test path MTU and sustained large I/O while inspecting drops and fragmentation counters on every affected hop. A packet larger than any unsupported hop's MTU can fail even when basic network reachability looks normal.
Incorrect Answers
A:Check SVM and LIF membership and test reachability from the appropriate tenant network for each overlapped prefix. It tests ontap ipspaces and tenant routing separation, not mtu inconsistency and jumbo-frame packet loss.
B:Inspect interface tags and switch-port configuration and test end-to-end connectivity using the intended VLAN. It tests vlan interfaces for shared physical uplinks, not mtu inconsistency and jumbo-frame packet loss.
C:Use a controlled LIF move and verify ARP, subnet connectivity and correct port selection from an affected client. It tests broadcast domains and lif failover targets, not mtu inconsistency and jumbo-frame packet loss.
Question 478
A replication fabric changes MTU on the controller but not on a transit switch, causing unexpected throughput drops. Which underlying distinction BEST explains this failure?
- Storage network connections need valid forward and return paths in the correct routing context.
- A packet larger than any unsupported hop's MTU can fail even when basic network reachability looks normal.
- Broadcast domains group ONTAP ports with shared network reachability; incorrect grouping invalidates LIF mobility assumptions.
- Tagged VLAN subinterfaces are usable only when the physical switching fabric carries the same logical network.
Explanation
Correct Answer
B:A packet larger than any unsupported hop's MTU can fail even when basic network reachability looks normal. Partial jumbo-frame configuration can produce intermittent protocol stalls and poor replication throughput.
Incorrect Answers
A:Storage network connections need valid forward and return paths in the correct routing context. This explains route tables and intercluster replication paths; it does not describe the limiting mechanism in mtu inconsistency and jumbo-frame packet loss presented by the scenario.
C:Broadcast domains group ONTAP ports with shared network reachability; incorrect grouping invalidates LIF mobility assumptions. This explains broadcast domains and lif failover targets; it does not describe the limiting mechanism in mtu inconsistency and jumbo-frame packet loss presented by the scenario.
D:Tagged VLAN subinterfaces are usable only when the physical switching fabric carries the same logical network. This explains vlan interfaces for shared physical uplinks; it does not describe the limiting mechanism in mtu inconsistency and jumbo-frame packet loss presented by the scenario.
Question 479
A replication fabric changes MTU on the controller but not on a transit switch, causing unexpected throughput drops. What control should remain in place after implementing the fix?
- Document MTU baselines and test the full path after switches or VLANs are changed.
- Audit port-group configuration and distribution after switch firmware or topology changes.
- Revalidate site-to-site routes and firewall permits when adding replication targets or IPspaces.
- Retest broadcast domain reachability after switch reconfiguration or cable moves.
Explanation
Correct Answer
A:Document MTU baselines and test the full path after switches or VLANs are changed. Partial jumbo-frame configuration can produce intermittent protocol stalls and poor replication throughput.
Incorrect Answers
B:Audit port-group configuration and distribution after switch firmware or topology changes.
C:Revalidate site-to-site routes and firewall permits when adding replication targets or IPspaces. It tests route tables and intercluster replication paths, not mtu inconsistency and jumbo-frame packet loss.
D:Retest broadcast domain reachability after switch reconfiguration or cable moves. It tests broadcast domains and lif failover targets, not mtu inconsistency and jumbo-frame packet loss.
Question 480
A replication fabric changes MTU on the controller but not on a transit switch, causing unexpected throughput drops. Choose TWO measures that together implement and verify a suitable solution for this ONTAP storage-administration situation. (Choose TWO.)
- Align MTU settings end to end across ONTAP interfaces, switch ports, and clients for networks using jumbo frames.
- Document application quiescence or consistency requirements in recurring snapshot runbooks.
- Exercise a controlled controller takeover and verify host I/O continuity, path states and recovery time.
- Configure ONTAP VLAN interfaces with matching switch trunk permissions and client subnet design.
- Test path MTU and sustained large I/O while inspecting drops and fragmentation counters on every affected hop.
Explanation
Correct Answers
A:Align MTU settings end to end across ONTAP interfaces, switch ports, and clients for networks using jumbo frames. A packet larger than any unsupported hop's MTU can fail even when basic network reachability looks normal. Partial jumbo-frame configuration can produce intermittent protocol stalls and poor replication throughput.
E:Test path MTU and sustained large I/O while inspecting drops and fragmentation counters on every affected hop. A packet larger than any unsupported hop's MTU can fail even when basic network reachability looks normal.
Incorrect Answers
B:Document application quiescence or consistency requirements in recurring snapshot runbooks. It tests snapshot copies as recoverable consistency points, not mtu inconsistency and jumbo-frame packet loss.
C:Exercise a controlled controller takeover and verify host I/O continuity, path states and recovery time. It tests host alua and multipath failover under takeover, not mtu inconsistency and jumbo-frame packet loss.
D:Configure ONTAP VLAN interfaces with matching switch trunk permissions and client subnet design. A packet larger than any unsupported hop's MTU can fail even when basic network reachability looks normal.
NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests