100% Latest & Updated Network Appliance NS0-165 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 490
SnapMirror initialization stalls even though both sites' management IP addresses answer ping. What failure consequence should the organization prioritize?
- Incorrect IPspace design can route client traffic to the wrong tenant or prevent access entirely.
- An invalid interface group can drop clients or leave expensive network ports idle.
- A LIF may fail over to a physically healthy but unreachable port, causing client outage.
- An unchecked replication path can silently leave disaster recovery relationships unable to update.
Explanation
Correct Answer
D:An unchecked replication path can silently leave disaster recovery relationships unable to update. This is a directly relevant trust, availability, cost, privacy, or data-quality consequence of intercluster lif reachability and peer troubleshooting. Underlying mechanism: Replication traffic commonly uses dedicated intercluster interfaces and policies separate from management access.
Incorrect Answers
A:Incorrect IPspace design can route client traffic to the wrong tenant or prevent access entirely.
B:An invalid interface group can drop clients or leave expensive network ports idle.
C:A LIF may fail over to a physically healthy but unreachable port, causing client outage.
Question 491
A storage uplink negotiates an unexpectedly low link speed and application reads slow sharply after hardware replacement. What is the MOST appropriate solution under these constraints?
- Inspect ONTAP and switch port speed, link errors, flow control and aggregation member health before retuning storage workloads.
- Choose supported ONTAP interface group mode and switch configuration based on redundancy and traffic distribution needs.
- Configure ONTAP VLAN interfaces with matching switch trunk permissions and client subnet design.
- Configure ONTAP routes and gateways per IPspace and intended management, data, or replication interfaces.
Explanation
Correct Answer
A:Inspect ONTAP and switch port speed, link errors, flow control and aggregation member health before retuning storage workloads. Physical-layer negotiation and packet corruption can constrain client I/O independently of volume placement and cache. Ignoring faulty Ethernet links can create persistent latency spikes and repeat client disconnects.
Incorrect Answers
B:Choose supported ONTAP interface group mode and switch configuration based on redundancy and traffic distribution needs. Physical-layer negotiation and packet corruption can constrain client I/O independently of volume placement and cache.
C:Configure ONTAP VLAN interfaces with matching switch trunk permissions and client subnet design. Physical-layer negotiation and packet corruption can constrain client I/O independently of volume placement and cache.
D:Configure ONTAP routes and gateways per IPspace and intended management, data, or replication interfaces. Physical-layer negotiation and packet corruption can constrain client I/O independently of volume placement and cache.
Question 492
A storage uplink negotiates an unexpectedly low link speed and application reads slow sharply after hardware replacement. What observable result would establish that the requirement is met?
- Compare error rates and measured throughput before and after a controlled cable or transceiver correction.
- Inspect LIF roles and network port assignments while measuring representative management and data connectivity.
- Check LACP state, member health, traffic balance, and connectivity after a controlled member failure.
- Use a controlled LIF move and verify ARP, subnet connectivity and correct port selection from an affected client.
Explanation
Correct Answer
A:Compare error rates and measured throughput before and after a controlled cable or transceiver correction. Physical-layer negotiation and packet corruption can constrain client I/O independently of volume placement and cache.
Incorrect Answers
B:Inspect LIF roles and network port assignments while measuring representative management and data connectivity. It tests dedicated cluster and management network roles, not port negotiation errors and uneven network throughput.
C:Check LACP state, member health, traffic balance, and connectivity after a controlled member failure. It tests interface groups and resilient ethernet uplinks, not port negotiation errors and uneven network throughput.
D:Use a controlled LIF move and verify ARP, subnet connectivity and correct port selection from an affected client. It tests broadcast domains and lif failover targets, not port negotiation errors and uneven network throughput.
Question 493
A storage uplink negotiates an unexpectedly low link speed and application reads slow sharply after hardware replacement. Which underlying distinction BEST explains this failure?
- Tagged VLAN subinterfaces are usable only when the physical switching fabric carries the same logical network.
- Link aggregation behavior depends on matching switch and controller modes and does not guarantee one flow uses all links.
- Physical-layer negotiation and packet corruption can constrain client I/O independently of volume placement and cache.
- ONTAP uses distinct network traffic classes whose failure domains and performance needs are not interchangeable.
Explanation
Correct Answer
C:Physical-layer negotiation and packet corruption can constrain client I/O independently of volume placement and cache. Ignoring faulty Ethernet links can create persistent latency spikes and repeat client disconnects.
Incorrect Answers
A:Tagged VLAN subinterfaces are usable only when the physical switching fabric carries the same logical network. This explains vlan interfaces for shared physical uplinks; it does not describe the limiting mechanism in port negotiation errors and uneven network throughput presented by the scenario.
B:Link aggregation behavior depends on matching switch and controller modes and does not guarantee one flow uses all links. This explains interface groups and resilient ethernet uplinks; it does not describe the limiting mechanism in port negotiation errors and uneven network throughput presented by the scenario.
D:ONTAP uses distinct network traffic classes whose failure domains and performance needs are not interchangeable. This explains dedicated cluster and management network roles; it does not describe the limiting mechanism in port negotiation errors and uneven network throughput presented by the scenario.
Question 494
A storage uplink negotiates an unexpectedly low link speed and application reads slow sharply after hardware replacement. Which preventive measure should be monitored as the platform changes?
- Maintain switch and ONTAP VLAN configuration parity during port moves and network upgrades.
- Include switch counters and transceiver health in storage network performance baselines.
- Retest broadcast domain reachability after switch reconfiguration or cable moves.
- Audit port-group configuration and distribution after switch firmware or topology changes.
Explanation
Correct Answer
B:Include switch counters and transceiver health in storage network performance baselines. Ignoring faulty Ethernet links can create persistent latency spikes and repeat client disconnects.
Incorrect Answers
A:Maintain switch and ONTAP VLAN configuration parity during port moves and network upgrades. It tests vlan interfaces for shared physical uplinks, not port negotiation errors and uneven network throughput.
C:Retest broadcast domain reachability after switch reconfiguration or cable moves. It tests broadcast domains and lif failover targets, not port negotiation errors and uneven network throughput.
D:Audit port-group configuration and distribution after switch firmware or topology changes. It tests interface groups and resilient ethernet uplinks, not port negotiation errors and uneven network throughput.
Question 495
A storage uplink negotiates an unexpectedly low link speed and application reads slow sharply after hardware replacement. Which adverse outcome is the MOST direct risk if the issue persists?
- Incorrect IPspace design can route client traffic to the wrong tenant or prevent access entirely.
- A VLAN mismatch can silently isolate client data services while physical link LEDs remain green.
- Conflating traffic planes can prevent cluster coordination or isolate management during client-network congestion.
- Ignoring faulty Ethernet links can create persistent latency spikes and repeat client disconnects.
Explanation
Correct Answer
D:Ignoring faulty Ethernet links can create persistent latency spikes and repeat client disconnects. This is a directly relevant trust, availability, cost, privacy, or data-quality consequence of port negotiation errors and uneven network throughput. Underlying mechanism: Physical-layer negotiation and packet corruption can constrain client I/O independently of volume placement and cache.
Incorrect Answers
A:Incorrect IPspace design can route client traffic to the wrong tenant or prevent access entirely. It tests ontap ipspaces and tenant routing separation, not port negotiation errors and uneven network throughput and produces a different.
B:A VLAN mismatch can silently isolate client data services while physical link LEDs remain green. It tests vlan interfaces for shared physical uplinks, not port negotiation errors and uneven network throughput and produces a different.
C:Conflating traffic planes can prevent cluster coordination or isolate management during client-network congestion. It tests dedicated cluster and management network roles, not port negotiation errors and uneven network throughput and produces a different.
Question 496
A switch counter shows increasing CRC errors on one LACP member, but the storage team blames the aggregate's disk utilization. What infrastructure or software action BEST resolves the stated issue?
- Configure ONTAP routes and gateways per IPspace and intended management, data, or replication interfaces.
- Configure ONTAP VLAN interfaces with matching switch trunk permissions and client subnet design.
- Choose supported ONTAP interface group mode and switch configuration based on redundancy and traffic distribution needs.
- Inspect ONTAP and switch port speed, link errors, flow control and aggregation member health before retuning storage workloads.
Explanation
Correct Answer
D:Inspect ONTAP and switch port speed, link errors, flow control and aggregation member health before retuning storage workloads. Physical-layer negotiation and packet corruption can constrain client I/O independently of volume placement and cache. Ignoring faulty Ethernet links can create persistent latency spikes and repeat client disconnects.
Incorrect Answers
A:Configure ONTAP routes and gateways per IPspace and intended management, data, or replication interfaces. Physical-layer negotiation and packet corruption can constrain client I/O independently of volume placement and cache.
B:Configure ONTAP VLAN interfaces with matching switch trunk permissions and client subnet design. Physical-layer negotiation and packet corruption can constrain client I/O independently of volume placement and cache.
C:Choose supported ONTAP interface group mode and switch configuration based on redundancy and traffic distribution needs. Physical-layer negotiation and packet corruption can constrain client I/O independently of volume placement and cache.
Question 497
A switch counter shows increasing CRC errors on one LACP member, but the storage team blames the aggregate's disk utilization. How should the team verify that the corrective action works?
- Inspect LIF roles and network port assignments while measuring representative management and data connectivity.
- Check LACP state, member health, traffic balance, and connectivity after a controlled member failure.
- Use a controlled LIF move and verify ARP, subnet connectivity and correct port selection from an affected client.
- Compare error rates and measured throughput before and after a controlled cable or transceiver correction.
Explanation
Correct Answer
D:Compare error rates and measured throughput before and after a controlled cable or transceiver correction. Physical-layer negotiation and packet corruption can constrain client I/O independently of volume placement and cache.
Incorrect Answers
A:Inspect LIF roles and network port assignments while measuring representative management and data connectivity. It tests dedicated cluster and management network roles, not port negotiation errors and uneven network throughput.
B:Check LACP state, member health, traffic balance, and connectivity after a controlled member failure. It tests interface groups and resilient ethernet uplinks, not port negotiation errors and uneven network throughput.
C:Use a controlled LIF move and verify ARP, subnet connectivity and correct port selection from an affected client. It tests broadcast domains and lif failover targets, not port negotiation errors and uneven network throughput.
Question 498
A switch counter shows increasing CRC errors on one LACP member, but the storage team blames the aggregate's disk utilization. Which concept is MOST relevant to the stated conditions?
- ONTAP uses distinct network traffic classes whose failure domains and performance needs are not interchangeable.
- Physical-layer negotiation and packet corruption can constrain client I/O independently of volume placement and cache.
- Tagged VLAN subinterfaces are usable only when the physical switching fabric carries the same logical network.
- Link aggregation behavior depends on matching switch and controller modes and does not guarantee one flow uses all links.
Explanation
Correct Answer
B:Physical-layer negotiation and packet corruption can constrain client I/O independently of volume placement and cache. Ignoring faulty Ethernet links can create persistent latency spikes and repeat client disconnects.
Incorrect Answers
A:ONTAP uses distinct network traffic classes whose failure domains and performance needs are not interchangeable. This explains dedicated cluster and management network roles; it does not describe the limiting mechanism in port negotiation errors and uneven network throughput presented by the scenario.
C:Tagged VLAN subinterfaces are usable only when the physical switching fabric carries the same logical network. This explains vlan interfaces for shared physical uplinks; it does not describe the limiting mechanism in port negotiation errors and uneven network throughput presented by the scenario.
D:Link aggregation behavior depends on matching switch and controller modes and does not guarantee one flow uses all links. This explains interface groups and resilient ethernet uplinks; it does not describe the limiting mechanism in port negotiation errors and uneven network throughput presented by the scenario.
Question 499
A switch counter shows increasing CRC errors on one LACP member, but the storage team blames the aggregate's disk utilization. Which preventive measure should be monitored as the platform changes?
- Include switch counters and transceiver health in storage network performance baselines.
- Retest broadcast domain reachability after switch reconfiguration or cable moves.
- Maintain switch and ONTAP VLAN configuration parity during port moves and network upgrades.
- Audit port-group configuration and distribution after switch firmware or topology changes.
Explanation
Correct Answer
A:Include switch counters and transceiver health in storage network performance baselines. Ignoring faulty Ethernet links can create persistent latency spikes and repeat client disconnects.
Incorrect Answers
B:Retest broadcast domain reachability after switch reconfiguration or cable moves. It tests broadcast domains and lif failover targets, not port negotiation errors and uneven network throughput.
C:Maintain switch and ONTAP VLAN configuration parity during port moves and network upgrades. It tests vlan interfaces for shared physical uplinks, not port negotiation errors and uneven network throughput.
D:Audit port-group configuration and distribution after switch firmware or topology changes. It tests interface groups and resilient ethernet uplinks, not port negotiation errors and uneven network throughput.
Question 500
A switch counter shows increasing CRC errors on one LACP member, but the storage team blames the aggregate's disk utilization. Choose THREE measures that together implement and verify a suitable solution for this ONTAP storage-administration situation. (Choose THREE.)
- Compare error rates and measured throughput before and after a controlled cable or transceiver correction.
- Correlate aggregate fullness, active write throughput, and latency across controlled load intervals.
- Include switch counters and transceiver health in storage network performance baselines.
- Monitor cache health, latency and origin connectivity after branch network or workload changes.
- Inspect ONTAP and switch port speed, link errors, flow control and aggregation member health before retuning storage workloads.
- Diagnose ONTAP data LIF operational status, assigned home port, failover state, and underlying physical link before changing configuration.
Explanation
Correct Answers
A:Compare error rates and measured throughput before and after a controlled cable or transceiver correction. Physical-layer negotiation and packet corruption can constrain client I/O independently of volume placement and cache.
C:Include switch counters and transceiver health in storage network performance baselines. Ignoring faulty Ethernet links can create persistent latency spikes and repeat client disconnects.
E:Inspect ONTAP and switch port speed, link errors, flow control and aggregation member health before retuning storage workloads. Physical-layer negotiation and packet corruption can constrain client I/O independently of volume placement and cache. Ignoring faulty Ethernet links can create persistent latency spikes and repeat client disconnects.
Incorrect Answers
B:Correlate aggregate fullness, active write throughput, and latency across controlled load intervals. It tests aggregate free-space pressure and write latency, not port negotiation errors and uneven network throughput.
D:Monitor cache health, latency and origin connectivity after branch network or workload changes. It tests flexcache remote-read acceleration and coherence, not port negotiation errors and uneven network throughput.
F:Diagnose ONTAP data LIF operational status, assigned home port, failover state, and underlying physical link before changing configuration. Physical-layer negotiation and packet corruption can constrain client I/O independently of volume placement and cache.
NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests