Juniper JN0-364 Exam Dumps, Practice Test Questions

100% Latest & Updated Juniper JN0-364 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Juniper JN0-364  Premium File
$54.99
$49.99

JN0-364 Premium File

  • Premium File: 69 Questions & Answers. Last update: Nov 9, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

JN0-364 Premium File

Juniper JN0-364  Premium File
  • Premium File: 69 Questions & Answers. Last update: Nov 9, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$54.99
$49.99

Juniper JN0-364 Practice Test 19

Question 180

A LAN routing change elects another DIS, and a reviewer mistakes the extra pseudonode records for duplicate physical routers. Independently, the review flags the potentially unsafe practice “Treat DIS label change alone as proof all user traffic failed”. Which validation addresses the risk without assuming a particular cause?

  1. Compare adjacency uptime and route convergence after election
  2. Inspect LAN interface DIS identity and pseudonode LSP
  3. Compare per-level IS-IS LAN priorities
  4. Delete every pseudonode entry as an obvious duplicate router

Explanation

Correct Answer

A:

Election change needs forwarding and route evidence. A new DIS should not create sustained reachability loss.

Incorrect Answers

B:

A DIS represents a LAN pseudonode in link-state advertisement.

C:

DIS election depends on priority and candidate identifiers.

D:

Removing valid pseudonode information distorts topology.

Question 181

A provider introduces a new regional prefix and IS-IS neighbors remain up but a receiving core router does not learn the route. The objective is to read level-specific LSPs. Which Junos configuration or design action best satisfies the objective?

  1. Force all routers to retain expired LSPs indefinitely
  2. Inspect the correct Level 1 or Level 2 database for the originator's LSP
  3. Declare installation guaranteed simply because an LSP packet was received
  4. Assume every received LSP contains all interfaces and prefixes on the network

Explanation

Correct Answer

B:

LSP flooding scope follows IS-IS level boundaries.

Incorrect Answers

A:

Stale topology information can create incorrect paths.

C:

Received LSDB content does not alone prove active route.

D:

TLV content and policy determine advertised reachability.

Question 182

A provider introduces a new regional prefix and IS-IS neighbors remain up but a receiving core router does not learn the route. The objective is to interpret reachability TLVs. Which operational choice should be prioritized in this design?

  1. Declare installation guaranteed simply because an LSP packet was received
  2. Force all routers to retain expired LSPs indefinitely
  3. Verify the relevant IP prefix appears in a supported reachability TLV
  4. Search only Level 1 data for a prefix advertised solely through Level 2

Explanation

Correct Answer

C:

An LSP identifier alone does not establish that a destination was advertised.

Incorrect Answers

A:

Received LSDB content does not alone prove active route.

B:

Stale topology information can create incorrect paths.

D:

Wrong database level can conceal valid reachability.

Question 183

A provider introduces a new regional prefix and IS-IS neighbors remain up but a receiving core router does not learn the route. The objective is to check LSP sequence and freshness. Which routing or switching control best fits the requirement?

  1. Assume every received LSP contains all interfaces and prefixes on the network
  2. Declare installation guaranteed simply because an LSP packet was received
  3. Compare sequence numbers and remaining lifetime after a topology update
  4. Search only Level 1 data for a prefix advertised solely through Level 2

Explanation

Correct Answer

C:

Current LSP versions are needed for consistent SPF calculations.

Incorrect Answers

A:

TLV content and policy determine advertised reachability.

B:

Received LSDB content does not alone prove active route.

D:

Wrong database level can conceal valid reachability.

Question 184

A provider introduces a new regional prefix and IS-IS neighbors remain up but a receiving core router does not learn the route. The objective is to confirm local route calculation. Which verification should be performed before approving the change?

  1. Assume every received LSP contains all interfaces and prefixes on the network
  2. Compare usable LSP reachability with selected route in the routing table
  3. Force all routers to retain expired LSPs indefinitely
  4. Search only Level 1 data for a prefix advertised solely through Level 2

Explanation

Correct Answer

B:

An advertised prefix still needs valid SPF and install conditions.

Incorrect Answers

A:

TLV content and policy determine advertised reachability.

C:

Stale topology information can create incorrect paths.

D:

Wrong database level can conceal valid reachability.

Question 185

A provider introduces a new regional prefix and IS-IS neighbors remain up but a receiving core router does not learn the route. Two objectives apply: (1) read level-specific LSPs; and (2) check LSP sequence and freshness. Which TWO controls together satisfy the requirements? Choose TWO.

  1. Force all routers to retain expired LSPs indefinitely
  2. Compare sequence numbers and remaining lifetime after a topology update
  3. Inspect the correct Level 1 or Level 2 database for the originator's LSP
  4. Search only Level 1 data for a prefix advertised solely through Level 2
  5. Declare installation guaranteed simply because an LSP packet was received

Explanation

Correct Answers

B:

Current LSP versions are needed for consistent SPF calculations.

C:

LSP flooding scope follows IS-IS level boundaries.

Incorrect Answers

A:

Stale topology information can create incorrect paths.

D:

Wrong database level can conceal valid reachability.

E:

Received LSDB content does not alone prove active route.

Question 186

A provider introduces a new regional prefix and IS-IS neighbors remain up but a receiving core router does not learn the route. Three objectives apply: (1) read level-specific LSPs; (2) check LSP sequence and freshness; and (3) confirm local route calculation. Which THREE controls together satisfy the requirements? Choose THREE.

  1. Assume every received LSP contains all interfaces and prefixes on the network
  2. Declare installation guaranteed simply because an LSP packet was received
  3. Compare sequence numbers and remaining lifetime after a topology update
  4. Search only Level 1 data for a prefix advertised solely through Level 2
  5. Inspect the correct Level 1 or Level 2 database for the originator's LSP
  6. Compare usable LSP reachability with selected route in the routing table

Explanation

Correct Answers

C:

Current LSP versions are needed for consistent SPF calculations.

E:

LSP flooding scope follows IS-IS level boundaries.

F:

An advertised prefix still needs valid SPF and install conditions.

Incorrect Answers

A:

TLV content and policy determine advertised reachability.

B:

Received LSDB content does not alone prove active route.

D:

Wrong database level can conceal valid reachability.

Question 187

The receiving LSDB contains an LSP from the originator yet the missing prefix is absent from the expected reachability TLV. Independently, the review flags the potentially unsafe practice “Search only Level 1 data for a prefix advertised solely through Level 2”. Which inspection best evaluates that practice?

  1. Inspect route table entry and protocol install reason
  2. Inspect IP reachability TLVs in the originator's LSP
  3. Compare per-level IS-IS database entries for the originator
  4. Force all routers to retain expired LSPs indefinitely

Explanation

Correct Answer

C:

Wrong database level can conceal valid reachability. LSP flooding scope follows IS-IS level boundaries.

Incorrect Answers

A:

An advertised prefix still needs valid SPF and install conditions.

B:

An LSP identifier alone does not establish that a destination was advertised.

D:

Stale topology information can create incorrect paths.

Question 188

The receiving LSDB contains an LSP from the originator yet the missing prefix is absent from the expected reachability TLV. Independently, the review flags the potentially unsafe practice “Assume every received LSP contains all interfaces and prefixes on the network”. Which evidence most directly tests the flagged assumption?

  1. Inspect IP reachability TLVs in the originator's LSP
  2. Declare installation guaranteed simply because an LSP packet was received
  3. Compare per-level IS-IS database entries for the originator
  4. Inspect LSP sequence, checksum and lifetime information

Explanation

Correct Answer

A:

TLV content and policy determine advertised reachability. An LSP identifier alone does not establish that a destination was advertised.

Incorrect Answers

B:

Received LSDB content does not alone prove active route.

C:

LSP flooding scope follows IS-IS level boundaries.

D:

Current LSP versions are needed for consistent SPF calculations.

Question 189

The receiving LSDB contains an LSP from the originator yet the missing prefix is absent from the expected reachability TLV. Independently, the review flags the potentially unsafe practice “Force all routers to retain expired LSPs indefinitely”. Which diagnostic check tests this potentially unsafe choice?

  1. Inspect IP reachability TLVs in the originator's LSP
  2. Inspect LSP sequence, checksum and lifetime information
  3. Inspect route table entry and protocol install reason
  4. Search only Level 1 data for a prefix advertised solely through Level 2

Explanation

Correct Answer

B:

Stale topology information can create incorrect paths. Current LSP versions are needed for consistent SPF calculations.

Incorrect Answers

A:

An LSP identifier alone does not establish that a destination was advertised.

C:

An advertised prefix still needs valid SPF and install conditions.

D:

Wrong database level can conceal valid reachability.

Question 190

The receiving LSDB contains an LSP from the originator yet the missing prefix is absent from the expected reachability TLV. Independently, the review flags the potentially unsafe practice “Declare installation guaranteed simply because an LSP packet was received”. Which validation addresses the risk without assuming a particular cause?

  1. Search only Level 1 data for a prefix advertised solely through Level 2
  2. Inspect route table entry and protocol install reason
  3. Inspect IP reachability TLVs in the originator's LSP
  4. Inspect LSP sequence, checksum and lifetime information

Explanation

Correct Answer

B:

Received LSDB content does not alone prove active route. An advertised prefix still needs valid SPF and install conditions.

Incorrect Answers

A:

Wrong database level can conceal valid reachability.

C:

An LSP identifier alone does not establish that a destination was advertised.

D:

Current LSP versions are needed for consistent SPF calculations.

Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.