Juniper JN0-650 Exam Dumps, Practice Test Questions

100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Juniper JN0-650  Premium File
$54.99
$49.99

JN0-650 Premium File

  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

JN0-650 Premium File

Juniper JN0-650  Premium File
  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$54.99
$49.99

Juniper JN0-650 Practice Test 106

Question 1050

To prevent recurrence of this precise networking failure, which practice should be adopted? Two equal LOCAL_PREF and AS-path candidates remain tied until MED influences the choice under the applicable comparison rules.

  1. Distinguish internal exit selection from inbound inter-AS path influence in routing design reviews.
  2. Track every BGP advertise-inactive exception and test cross-protocol route selection.
  3. Use multivariable path-selection lab tests before changing MED-based policy.
  4. Monitor AS-path anomalies and validate inter-AS topology changes before enabling export.

Explanation

Correct Answer

C:

Use multivariable path-selection lab tests before changing MED-based policy. This guards against MED has lower precedence than LOCAL_PREF and AS-path in common BGP best-path selection and must be compared under supported conditions.

Incorrect Answers

A:

“Distinguish internal exit selection from inbound inter-AS path influence in routing design reviews” belongs to a separate Border Gateway Protocol (BGP) issue: an operator tries to make a remote AS prefer one inbound path using LOCAL_PREF that the remote eBGP peer never receives. It does not explain the condition tested here.

B:

“Track every BGP advertise-inactive exception and test cross-protocol route selection” belongs to a separate Border Gateway Protocol (BGP) issue: a BGP export policy advertises a prefix that exists only as an inactive local candidate, despite an expectation of default active-only behavior. It does not explain the condition tested here.

D:

“Monitor AS-path anomalies and validate inter-AS topology changes before enabling export” belongs to a separate Border Gateway Protocol (BGP) issue: the local AS appears in a received external BGP AS_PATH and the route is rejected despite valid prefix reachability. It does not explain the condition tested here.

Question 1051

For this case, select TWO complementary measures or outcome checks that directly resolve the problem: A campus uses a separate inet.2 multicast RPF table and investigators inspect only inet.0, overlooking a stale source route.

  1. Assume inet.0 always controls PIM RPF even when an alternate multicast RPF table is configured.
  2. Identify the configured RPF table and verify the source route and next hop in that table before updating the multicast policy.
  3. The selected upstream RPF neighbor and packet arrival interface agree, restoring intended multicast flow.
  4. Assume a working unicast BGP session automatically exchanges multicast MSDP source-active messages.
  5. Disable IGMP snooping everywhere and assume uncontrolled flooding is equivalent to correct membership delivery.

Explanation

Correct Answers

B:

Identify the configured RPF table and verify the source route and next hop in that table before updating the multicast policy. This addresses the dependency that Junos multicast RPF may use a dedicated routing table, so the effective RPF path must be inspected, not guessed from unicast traffic.

C:

The selected upstream RPF neighbor and packet arrival interface agree, restoring intended multicast flow. The specific steps required are to identify the configured RPF table and verify the source route and next hop in that table before updating the multicast policy.

Incorrect Answers

A:

“Assume inet.0 always controls PIM RPF even when an alternate multicast RPF table is configured” does not address Junos multicast RPF may use a dedicated routing table, so the effective RPF path must be inspected, not guessed from unicast traffic.

D:

“Assume a working unicast BGP session automatically exchanges multicast MSDP source-active messages” is an unsafe response to a different problem: a receiver domain requires discovery of sources known behind another RP, yet inter-RP source information exchange is absent. It is not a valid fix here.

E:

“Disable IGMP snooping everywhere and assume uncontrolled flooding is equivalent to correct membership delivery” is an unsafe response to a different problem: an access VLAN floods every multicast packet because IGMP snooping state was lost during migration. It is not a valid fix here.

Question 1052

A Junos enterprise team investigates this incident: Members of the same trusted workgroup are accidentally placed in isolated rather than community PVLAN ports and lose peer communication. Which technical explanation most directly identifies the cause or design principle?

  1. Layer 2 protocol tunneling preserves selected customer control traffic across a service where ordinary data tagging is not enough.
  2. MSTP region membership depends on compatible region parameters such as name, revision and VLAN-to-instance map.
  3. Q-in-Q encapsulation can place a provider outer tag around customer VLAN tags to isolate transport context.
  4. A private VLAN community allows permitted communication within its community; isolated behavior is stricter.

Explanation

Correct Answer

D:

A private VLAN community allows permitted communication within its community; isolated behavior is stricter. The appropriate response is to map the trusted endpoints to the proper community secondary VLAN and keep other groups segregated.

Incorrect Answers

A:

“Layer 2 protocol tunneling preserves selected customer control traffic across a service where ordinary data tagging is not enough” belongs to a separate Ethernet Switching and Spanning Tree issue: a private L2 service must extend customer control protocols, yet the provider fabric consumes or drops the customer's BPDUs. It does not explain the condition tested here.

B:

“MSTP region membership depends on compatible region parameters such as name, revision and VLAN-to-instance map” belongs to a separate Ethernet Switching and Spanning Tree issue: two adjacent MSTP switches show different region digests after one has a different VLAN-to-instance map. It does not explain the condition tested here.

C:

“Q-in-Q encapsulation can place a provider outer tag around customer VLAN tags to isolate transport context” belongs to a separate Ethernet Switching and Spanning Tree issue: a service provider must carry multiple customer VLAN IDs transparently over one metro Ethernet handoff. It does not explain the condition tested here.

Question 1053

Select THREE complementary corrective, verification, or preventive controls for this scenario: An enterprise chooses a different BGP exit after import policy assigns a higher local preference to the backup path.

  1. Use MED changes alone as guaranteed overrides of a conflicting higher local preference.
  2. The selected BGP route reflects the intended higher LOCAL_PREF, and traceroute follows the approved exit.
  3. Assume TCP session Established proves every learned prefix has a usable forwarding next hop.
  4. Inspect per-route local preferences and import policy; set the intended exit's LOCAL_PREF consistently.
  5. Test expected best-path behavior before modifying LOCAL_PREF across internal peers.
  6. Point to a successful IPv4 traceroute as sufficient proof an IPv6 BGP next hop resolves.

Explanation

Correct Answers

B:

Confirmation: Inspect per-route local preferences and import policy; set the intended exit's LOCAL_PREF consistently.

D:

Correction: BGP typically prefers a larger LOCAL_PREF among otherwise eligible candidates before later path-selection tie breakers.

E:

Prevention of recurrence: BGP typically prefers a larger LOCAL_PREF among otherwise eligible candidates before later path-selection tie breakers.

Incorrect Answers

A:

“Use MED changes alone as guaranteed overrides of a conflicting higher local preference” does not address BGP typically prefers a larger LOCAL_PREF among otherwise eligible candidates before later path-selection tie breakers.

C:

“Assume TCP session Established proves every learned prefix has a usable forwarding next hop” is an unsafe response to a different problem: an iBGP egress advertisement forwards a transit next hop that branch routers cannot resolve, creating traffic blackholes. It is not a valid fix here.

F:

“Point to a successful IPv4 traceroute as sufficient proof an IPv6 BGP next hop resolves” is an unsafe response to a different problem: an IPv6 transit prefix is hidden because its next-hop address is absent from the correct IPv6 routing table. It is not a valid fix here.

Question 1054

For this case, select TWO complementary measures or outcome checks that directly resolve the problem: A RED drop profile is applied too aggressively and drops packets even under moderate load.

  1. Set the maximum drop probability at near-empty queue levels and expect no early loss.
  2. Review configured drop probability versus fill level and align the profile with acceptable congestion targets.
  3. Drop counters and queue utilization follow the intended curve through increasing load.
  4. Assume more queues automatically improve latency even if control traffic remains mapped to a congested queue.
  5. Assume any policing rule provides the same paced, buffered behavior as egress shaping.

Explanation

Correct Answers

B:

Review configured drop probability versus fill level and align the profile with acceptable congestion targets. This addresses the dependency that drop profiles and weighted random early detection influence probabilistic discard thresholds as queue fill rises.

C:

Drop counters and queue utilization follow the intended curve through increasing load. The specific steps required are to review configured drop probability versus fill level and align the profile with acceptable congestion targets.

Incorrect Answers

A:

“Set the maximum drop probability at near-empty queue levels and expect no early loss” does not address drop profiles and weighted random early detection influence probabilistic discard thresholds as queue fill rises.

D:

“Assume more queues automatically improve latency even if control traffic remains mapped to a congested queue” is an unsafe response to a different problem: a forwarding-class configuration sends critical routing packets to a queue used for bulk backups and adjacency stability degrades under load. It is not a valid fix here.

E:

“Assume any policing rule provides the same paced, buffered behavior as egress shaping” is an unsafe response to a different problem: a WAN customer requires smooth outbound transmission but an ingress drop policer creates unnecessary burst loss. It is not a valid fix here.

Question 1055

A network change is required for the following specific situation: An operator tries to make a remote AS prefer one inbound path using LOCAL_PREF that the remote eBGP peer never receives. Which corrective action is most appropriate?

  1. Read all relevant candidate attributes and apply policy consistent with intended tie-breaker precedence.
  2. Verify endpoint reachability and configure appropriate multihop session parameters and security controls.
  3. Use precise route-filter match conditions and explicit rejection of unauthorized more-specific routes.
  4. Select a permitted inbound traffic-engineering mechanism with the provider, such as suitable AS-path prepending or agreed communities.

Explanation

Correct Answer

D:

LOCAL_PREF is an intra-AS BGP attribute, not a value routinely advertised to external BGP neighbors. Verify this by checking that external peer advertisements show the intended supported attributes and inbound traffic is measured.

Incorrect Answers

A:

“Read all relevant candidate attributes and apply policy consistent with intended tie-breaker precedence” belongs to a separate Border Gateway Protocol (BGP) issue: two equal LOCAL_PREF and AS-path candidates remain tied until MED influences the choice under the applicable comparison rules. It does not explain the condition tested here.

B:

“Verify endpoint reachability and configure appropriate multihop session parameters and security controls” belongs to a separate Border Gateway Protocol (BGP) issue: a transit peering is moved off directly connected interface IPs to loopbacks yet the TTL and reachability design are not updated. It does not explain the condition tested here.

C:

“Use precise route-filter match conditions and explicit rejection of unauthorized more-specific routes” belongs to a separate Border Gateway Protocol (BGP) issue: a prefix-list matches a broad aggregate but accepts unwanted subprefixes from a new external neighbor. It does not explain the condition tested here.

Question 1056

The team believes it has resolved this Junos issue: An access switch is moved to Junos OS Evolved but the team assumes every earlier guest-VLAN feature still exists on L2 802.1X interfaces. Which observation best verifies the specific intended result?

  1. Validation shows only supported options in use and the intended access-denial/fallback behavior.
  2. Only the inventoried device has the expected limited connectivity; rogue or unknown hardware is denied.
  3. The user sees a valid login prompt and receives only the approved post-login policy.
  4. A known-good supplicant completes EAP/RADIUS authentication and the port reaches its intended authorized state.

Explanation

Correct Answer

A:

Validation shows only supported options in use and the intended access-denial/fallback behavior. This checks the relevant result after consult the target release's official 802.1X support matrix and adapt the authorization design to supported methods.

Incorrect Answers

B:

“Only the inventoried device has the expected limited connectivity; rogue or unknown hardware is denied” belongs to a separate Layer 2 Authentication and Access Control issue: a printer's MAC address is duplicated by an unauthorized endpoint that obtains the same weak MAC-based policy. It does not explain the condition tested here.

C:

“The user sees a valid login prompt and receives only the approved post-login policy” belongs to a separate Layer 2 Authentication and Access Control issue: a visitor portal redirects browser traffic but never releases the user to the approved network after authentication. It does not explain the condition tested here.

D:

“A known-good supplicant completes EAP/RADIUS authentication and the port reaches its intended authorized state” instead concerns another network scenario: A corporate laptop presents valid 802.1X credentials but stays unauthorized because the switch is using the wrong RADIUS server profile. It does not address the requirement here.

Question 1057

For this case, select TWO complementary measures or outcome checks that directly resolve the problem: Two EX distribution routers in OSPF area 0 remain in ExStart after a new transit VLAN uses inconsistent interface MTUs.

  1. Disable the MTU check indefinitely without identifying why adjacent links differ.
  2. Compare interface MTUs and OSPF neighbor states, then align the supported interface MTU on both endpoints.
  3. The peers advance to Full and successfully exchange database summaries after an approved aligned-MTU change.
  4. Change the remote area's physical cabling before checking local route filtering.
  5. Increase every external metric blindly without checking which path should win.

Explanation

Correct Answers

B:

Compare interface MTUs and OSPF neighbor states, then align the supported interface MTU on both endpoints. This addresses the dependency that OSPF database-description exchange can stall when adjacent interfaces disagree on MTU even though basic Hello connectivity exists.

C:

The peers advance to Full and successfully exchange database summaries after an approved aligned-MTU change. The specific steps required are to compare interface MTUs and OSPF neighbor states, then align the supported interface MTU on both endpoints.

Incorrect Answers

A:

“Disable the MTU check indefinitely without identifying why adjacent links differ” does not address OSPF database-description exchange can stall when adjacent interfaces disagree on MTU even though basic Hello connectivity exists.

D:

“Change the remote area's physical cabling before checking local route filtering” is an unsafe response to a different problem: an OSPF import policy hides external routes on one device while neighbors retain them, confusing the team reviewing reachability. It is not a valid fix here.

E:

“Increase every external metric blindly without checking which path should win” is an unsafe response to a different problem: an OSPF policy update redistributes a route without an appropriate external metric, shifting traffic to a slow backup. It is not a valid fix here.

Question 1058

To prevent recurrence of this precise networking failure, which practice should be adopted? An OSPF policy update redistributes a route without an appropriate external metric, shifting traffic to a slow backup.

  1. Keep IPv4 and IPv6 routing verification separate for dual-stack maintenance.
  2. Document expected external metrics and run primary/backup failover tests during policy changes.
  3. Reserve router IDs from a centrally managed inventory before zero-touch provisioning.
  4. Classify loopbacks and user-facing links separately from peer links when applying passive templates.

Explanation

Correct Answer

B:

Document expected external metrics and run primary/backup failover tests during policy changes. This guards against OSPF external route costs and metric types affect path choice and must reflect intended topology and failover behavior.

Incorrect Answers

A:

“Keep IPv4 and IPv6 routing verification separate for dual-stack maintenance” belongs to a separate Interior Gateway Protocols (IGPs) issue: an OSPFv3 adjacency on a dual-stack campus changes state because engineers treat IPv4 interface reachability as proof of IPv6 control-plane health. It does not explain the condition tested here.

C:

“Reserve router IDs from a centrally managed inventory before zero-touch provisioning” belongs to a separate Interior Gateway Protocols (IGPs) issue: a router's OSPF neighbor restarts repeatedly because duplicate router IDs were assigned to different routing nodes. It does not explain the condition tested here.

D:

“Classify loopbacks and user-facing links separately from peer links when applying passive templates” belongs to a separate Interior Gateway Protocols (IGPs) issue: an OSPF neighbor remains Down because the routed transit interface was left passive after a site template rollout. It does not explain the condition tested here.

Question 1059

Which suggested shortcut would be especially unsafe for this exact situation? A campus changes a telephone port but LLDP-MED location data remains mapped to an old floor.

  1. Include end-to-end marking tests when deploying voice VLANs and new phone models.
  2. Treat the old physical room value as correct because IP addressing did not change.
  3. Test both tagged phone frames and untagged PC frames during phone-port commissioning.
  4. Validate PD power profiles and test peak draw rather than idle boot alone.

Explanation

Correct Answer

B:

The tempting alternative fails because LLDP-MED location metadata can support telephony location services and must match actual switch-port placement. The supported action is to update the approved location mapping and confirm transmitted LLDP-MED location information on the affected port.

Incorrect Answers

A:

That prevention measure relates to a voice VLAN is configured correctly yet the switch's trust and rewrite policy fails to preserve the required phone traffic classification.; it is not the unsafe shortcut described here.

C:

That prevention measure relates to a phone-with-PC desk deployment lets the PC reach data services while the tagged voice stream is dropped by VLAN membership.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to an emergency intercom can establish Ethernet link but loses power during activity because its PD class is not supported by that port.; it is not the unsafe shortcut described here.

Question 1060

A Junos enterprise team investigates this incident: A host moves between leafs and the destination leaf still forwards toward the previous MAC location. Which technical explanation most directly identifies the cause or design principle?

  1. VXLAN encapsulates overlay traffic across an IP underlay; VTEP reachability is necessary even with valid BGP EVPN control-plane state.
  2. VXLAN adds encapsulation overhead, so underlay MTU must accommodate the intended overlay frame size.
  3. EVPN Type 2 MAC/IP advertisement carries endpoint reachability and mobility information in the control plane.
  4. VNI and bridge-domain mapping determines tenant overlay segmentation; misaligned mappings can misdeliver or isolate traffic.

Explanation

Correct Answer

C:

EVPN Type 2 MAC/IP advertisement carries endpoint reachability and mobility information in the control plane. The appropriate response is to check relevant BGP EVPN Type 2 advertisements, MAC mobility updates and import policy for the affected bridge domain.

Incorrect Answers

A:

“VXLAN encapsulates overlay traffic across an IP underlay; VTEP reachability is necessary even with valid BGP EVPN control-plane state” belongs to a separate EVPN issue: a VXLAN overlay's BGP EVPN routes are present, but the underlay cannot route to a remote VTEP loopback. It does not explain the condition tested here.

B:

“VXLAN adds encapsulation overhead, so underlay MTU must accommodate the intended overlay frame size” belongs to a separate EVPN issue: an EVPN-VXLAN frame is dropped over a path where the IP underlay MTU was sized only for unencapsulated Ethernet payloads. It does not explain the condition tested here.

D:

“VNI and bridge-domain mapping determines tenant overlay segmentation; misaligned mappings can misdeliver or isolate traffic” belongs to a separate EVPN issue: a campus extension carries the right VXLAN outer header but directs frames to the wrong tenant bridge domain due to bad VNI mapping. It does not explain the condition tested here.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.