100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 1080
Select THREE complementary corrective, verification, or preventive controls for this scenario: A Q-in-Q service works across transport but the far-end access handoff presents unexpected double tags.
- A packet capture shows the contracted customer tag or untagged frame at the endpoint.
- Treat ordinary VLAN membership as equivalent to isolation between every port inside that VLAN.
- Assume setting one global RSTP root automatically produces independently chosen roots for every VSTP VLAN.
- Include packet-capture verification of S-tag and C-tag transformation in provider handoffs.
- Assume every endpoint supports stacked 802.1Q tags even when the customer ordered a single-tagged handoff.
- Inspect the ingress/egress tag-processing configuration and correct the service handoff encapsulation.
Explanation
Correct Answers
A:Confirmation: Inspect the ingress/egress tag-processing configuration and correct the service handoff encapsulation.
D:Prevention of recurrence: Q-in-Q requires deliberate tagging and untagging at service boundaries, with customer tags retained according to the handoff contract.
F:Correction: Q-in-Q requires deliberate tagging and untagging at service boundaries, with customer tags retained according to the handoff contract.
Incorrect Answers
B:“Treat ordinary VLAN membership as equivalent to isolation between every port inside that VLAN” is an unsafe response to a different problem: a shared guest access VLAN allows two untrusted hotel-room ports to communicate directly, violating the isolation design. It is not a valid fix here.
C:“Assume setting one global RSTP root automatically produces independently chosen roots for every VSTP VLAN” is an unsafe response to a different problem: a legacy interop design needs separate per-VLAN spanning-tree compatibility but all VLANs inherit one unsuitable tree. It is not a valid fix here.
E:“Assume every endpoint supports stacked 802.1Q tags even when the customer ordered a single-tagged handoff” does not address Q-in-Q requires deliberate tagging and untagging at service boundaries, with customer tags retained according to the handoff contract.
Question 1081
For this case, select TWO complementary measures or outcome checks that directly resolve the problem: A redundant network changes the preferred route to the source while packets keep arriving on the other physical link.
- Require multicast forwarding to follow the receiver's shortest downstream path with no regard to source RPF.
- Assume a working unicast BGP session automatically exchanges multicast MSDP source-active messages.
- Compare source-route preference with actual multicast ingress and restore a consistent authorized upstream path.
- Create an IGMP group entry alone and expect it to establish PIM adjacency between routers.
- RPF counters and expected (S,G) forwarding stabilize after the route change.
Explanation
Correct Answers
C:Compare source-route preference with actual multicast ingress and restore a consistent authorized upstream path. This addresses the dependency that an RPF check is tied to the selected source path, so asymmetric arrival can invalidate otherwise reachable multicast traffic.
E:RPF counters and expected (S,G) forwarding stabilize after the route change. The specific steps required are to compare source-route preference with actual multicast ingress and restore a consistent authorized upstream path.
Incorrect Answers
A:“Require multicast forwarding to follow the receiver's shortest downstream path with no regard to source RPF” does not address an RPF check is tied to the selected source path, so asymmetric arrival can invalidate otherwise reachable multicast traffic.
B:“Assume a working unicast BGP session automatically exchanges multicast MSDP source-active messages” is an unsafe response to a different problem: a receiver domain requires discovery of sources known behind another RP, yet inter-RP source information exchange is absent. It is not a valid fix here.
D:“Create an IGMP group entry alone and expect it to establish PIM adjacency between routers” is an unsafe response to a different problem: a new L3 VLAN permits unicast connectivity but the PIM Hello adjacency remains absent on the active path. It is not a valid fix here.
Question 1082
A network change is required for the following specific situation: A route-reflector client receives an external destination but lacks the underlay path to the advertised next hop. Which corrective action is most appropriate?
- Inspect next-hop attributes and IGP reachability; deliberately choose appropriate next-hop-self policy or add valid underlay routes.
- Inspect reflector/client relationships and cluster behavior, then correct the intended route-reflector configuration.
- Put specific deny conditions before broad acceptance, and test the policy with representative routes.
- Examine both attributes in the received route detail and update the explicit routing policy rather than guessing.
Explanation
Correct Answer
A:A reachable BGP peering session does not itself make a third-party route next hop recursively resolvable. Verify this by checking that route detail shows a reachable next hop and end-to-end forwarding through the intended border router.
Incorrect Answers
B:“Inspect reflector/client relationships and cluster behavior, then correct the intended route-reflector configuration” belongs to a separate Border Gateway Protocol (BGP) issue: a full-mesh iBGP design is converted to route reflection but one peer is treated as an ordinary nonclient and route propagation fails. It does not explain the condition tested here.
C:“Put specific deny conditions before broad acceptance, and test the policy with representative routes” belongs to a separate Border Gateway Protocol (BGP) issue: a route with a permissive policy term is accepted before a later deny term can block it. It does not explain the condition tested here.
D:“Examine both attributes in the received route detail and update the explicit routing policy rather than guessing” belongs to a separate Border Gateway Protocol (BGP) issue: a router prefers a longer AS path when a higher LOCAL_PREF makes that route win, surprising the transit team. It does not explain the condition tested here.
Question 1083
Select THREE complementary corrective, verification, or preventive controls for this scenario: A finance video queue configured as low priority cannot meet latency targets because competing transfers share the same service policy.
- Raise the permitted long-term traffic rate indefinitely rather than evaluating burst-size configuration.
- Establish congestion thresholds and monitor starvation as part of queue-priority design.
- Assign the intended service class and scheduler priorities with measured bandwidth needs, then validate.
- Assume any policing rule provides the same paced, buffered behavior as egress shaping.
- Mark every forwarding class strict-high with no attention to starvation or bounded resource sharing.
- Under controlled congestion, critical media meets its objective while permitted best-effort traffic still progresses.
Explanation
Correct Answers
B:Prevention of recurrence: Scheduler priority and bandwidth allocation affect queuing service but must balance fairness and starvation concerns.
C:Correction: Scheduler priority and bandwidth allocation affect queuing service but must balance fairness and starvation concerns.
F:Confirmation: Assign the intended service class and scheduler priorities with measured bandwidth needs, then validate.
Incorrect Answers
A:“Raise the permitted long-term traffic rate indefinitely rather than evaluating burst-size configuration” is an unsafe response to a different problem: an uplink meets long-term bandwidth policy but legitimate short bursts exceed the token-bucket allowance. It is not a valid fix here.
D:“Assume any policing rule provides the same paced, buffered behavior as egress shaping” is an unsafe response to a different problem: a WAN customer requires smooth outbound transmission but an ingress drop policer creates unnecessary burst loss. It is not a valid fix here.
E:“Mark every forwarding class strict-high with no attention to starvation or bounded resource sharing” does not address scheduler priority and bandwidth allocation affect queuing service but must balance fairness and starvation concerns.
Question 1084
A network change is required for the following specific situation: A switch with an unexpectedly low bridge priority becomes MSTP root and redirects aggregation traffic through an access closet. Which corrective action is most appropriate?
- Narrow the match to approved selectors and compare affected packet counters and VLAN assignment.
- Inspect registration state and remove stale VLAN membership while preserving necessary registrations.
- Inspect the ingress/egress tag-processing configuration and correct the service handoff encapsulation.
- Compare bridge priority, VLAN or MSTI root and port path costs against design; adjust deliberately.
Explanation
Correct Answer
D:Spanning-tree root choice and path costs govern forwarding paths; unplanned priority changes can alter traffic patterns. Verify this by checking that root and forwarding roles match the approved topology under normal and failover conditions.
Incorrect Answers
A:“Narrow the match to approved selectors and compare affected packet counters and VLAN assignment” belongs to a separate Ethernet Switching and Spanning Tree issue: an ingress classification filter for one terminal type inadvertently redirects other hosts using the same uplink. It does not explain the condition tested here.
B:“Inspect registration state and remove stale VLAN membership while preserving necessary registrations” belongs to a separate Ethernet Switching and Spanning Tree issue: a dynamic VLAN is removed from one edge but stale MVRP registration keeps an unused VLAN active downstream. It does not explain the condition tested here.
C:“Inspect the ingress/egress tag-processing configuration and correct the service handoff encapsulation” belongs to a separate Ethernet Switching and Spanning Tree issue: customer traffic emerges with the provider service tag still attached and is rejected by an endpoint expecting ordinary Ethernet. It does not explain the condition tested here.
Question 1085
The team believes it has resolved this Junos issue: A provider handoff expects specific code-point markings yet a trunk rewrites every service class to default behavior. Which observation best verifies the specific intended result?
- Packet captures show the intended DSCP or 802.1p fields on outbound voice, video and data traffic.
- Voice traffic receives the required scheduled service at the congested egress without starving other classes.
- Control-plane-related traffic receives the expected queue treatment under simulated load.
- Only traffic meeting the defined match receives the intended queue and packet loss priority.
Explanation
Correct Answer
A:Packet captures show the intended DSCP or 802.1p fields on outbound voice, video and data traffic. This checks the relevant result after apply the appropriate interface rewrite rule and verify the contract-specific egress code points.
Incorrect Answers
B:“Voice traffic receives the required scheduled service at the congested egress without starving other classes” belongs to a separate Class of Service (CoS) issue: a campus has configured forwarding classes and schedulers but one uplink carries all traffic through default service because association is missing. It does not explain the condition tested here.
C:“Control-plane-related traffic receives the expected queue treatment under simulated load” belongs to a separate Class of Service (CoS) issue: a forwarding-class configuration sends critical routing packets to a queue used for bulk backups and adjacency stability degrades under load. It does not explain the condition tested here.
D:“Only traffic meeting the defined match receives the intended queue and packet loss priority” belongs to a separate Class of Service (CoS) issue: an application needs priority regardless of incoming DSCP, but an interface uses only a header-based classifier. It does not explain the condition tested here.
Question 1086
To prevent recurrence of this precise networking failure, which practice should be adopted? A provider-facing policy stops honoring a route-tag community after a new import policy changes the attached communities.
- Test path equivalence, forwarding and failure convergence before enabling transit ECMP.
- Include next-hop reachability tests in iBGP and route-reflector deployment acceptance.
- Review fall-through behavior with traceable policy test cases before changes reach production.
- Maintain community inventories and test outbound policy outcomes for allowed and denied prefixes.
Explanation
Correct Answer
D:Maintain community inventories and test outbound policy outcomes for allowed and denied prefixes. This guards against communities are policy metadata; tagging does not enforce advertisement restrictions unless a matching policy acts on it.
Incorrect Answers
A:“Test path equivalence, forwarding and failure convergence before enabling transit ECMP” belongs to a separate Border Gateway Protocol (BGP) issue: equal candidate BGP routes are visible but no multipath forwarding entry is installed because eligibility or policy differs. It does not explain the condition tested here.
B:“Include next-hop reachability tests in iBGP and route-reflector deployment acceptance” belongs to a separate Border Gateway Protocol (BGP) issue: a new IPv4 BGP prefix has a valid AS path but cannot become active after the IGP stops carrying its next-hop address. It does not explain the condition tested here.
C:“Review fall-through behavior with traceable policy test cases before changes reach production” belongs to a separate Border Gateway Protocol (BGP) issue: a route policy lacks an explicit intended default action, and unmatched BGP prefixes behave differently than planned. It does not explain the condition tested here.
Question 1087
For this case, select TWO complementary measures or outcome checks that directly resolve the problem: An OSPF import policy hides external routes on one device while neighbors retain them, confusing the team reviewing reachability.
- Raise interface OSPF costs without resolving the duplicated router IDs.
- Disable the MTU check indefinitely without identifying why adjacent links differ.
- The expected prefix becomes active locally while unwanted external prefixes remain filtered.
- Change the remote area's physical cabling before checking local route filtering.
- Compare LSDB advertisements with local route policy and inet.0 state; correct the intended import filter.
Explanation
Correct Answers
C:The expected prefix becomes active locally while unwanted external prefixes remain filtered. The specific steps required are to compare LSDB advertisements with local route policy and inet.0 state; correct the intended import filter.
E:Compare LSDB advertisements with local route policy and inet.0 state; correct the intended import filter. This addresses the dependency that local import policy can affect installed route visibility independently of the remote origination of LSAs.
Incorrect Answers
A:“Raise interface OSPF costs without resolving the duplicated router IDs” is an unsafe response to a different problem: a router's OSPF neighbor restarts repeatedly because duplicate router IDs were assigned to different routing nodes. It is not a valid fix here.
B:“Disable the MTU check indefinitely without identifying why adjacent links differ” is an unsafe response to a different problem: a core-router replacement leaves an OSPF adjacency stuck exchanging database descriptions, while the two ends have different Layer 3 MTUs. It is not a valid fix here.
D:“Change the remote area's physical cabling before checking local route filtering” does not address local import policy can affect installed route visibility independently of the remote origination of LSAs.
Question 1088
A Junos enterprise team investigates this incident: A remote prefix appears in incoming BGP updates yet never becomes active after a new route policy was applied. Which technical explanation most directly identifies the cause or design principle?
- Multihop BGP peerings require suitable routing to endpoint addresses and peer-session settings for nonadjacent endpoints.
- For eligible BGP candidates, LOCAL_PREF comparison precedes AS-path length, so AS-path length alone does not determine the winner.
- A BGP route rejected or hidden by import policy can be absent from active forwarding despite a healthy peer session.
- LOCAL_PREF is an intra-AS BGP attribute, not a value routinely advertised to external BGP neighbors.
Explanation
Correct Answer
C:A BGP route rejected or hidden by import policy can be absent from active forwarding despite a healthy peer session. The appropriate response is to inspect hidden-route reason, incoming attributes and import-policy decisions, then correct the authorized match.
Incorrect Answers
A:“Multihop BGP peerings require suitable routing to endpoint addresses and peer-session settings for nonadjacent endpoints” belongs to a separate Border Gateway Protocol (BGP) issue: a transit peering is moved off directly connected interface IPs to loopbacks yet the TTL and reachability design are not updated. It does not explain the condition tested here.
B:“For eligible BGP candidates, LOCAL_PREF comparison precedes AS-path length, so AS-path length alone does not determine the winner” belongs to a separate Border Gateway Protocol (BGP) issue: a router prefers a longer AS path when a higher LOCAL_PREF makes that route win, surprising the transit team. It does not explain the condition tested here.
D:“LOCAL_PREF is an intra-AS BGP attribute, not a value routinely advertised to external BGP neighbors” belongs to a separate Border Gateway Protocol (BGP) issue: a dual-homed site changes internal LOCAL_PREF but sees no change in the other autonomous system's inbound traffic choice. It does not explain the condition tested here.
Question 1089
The team believes it has resolved this Junos issue: A receiver domain requires discovery of sources known behind another RP, yet inter-RP source information exchange is absent. Which observation best verifies the specific intended result?
- Remote ASM receivers can discover the intended source and request multicast delivery through the proper tree.
- The selected upstream RPF neighbor and packet arrival interface agree, restoring intended multicast flow.
- The specified groups remain within the approved scope while unrelated enterprise multicast flows continue.
- RPF counters and expected (S,G) forwarding stabilize after the route change.
Explanation
Correct Answer
A:Remote ASM receivers can discover the intended source and request multicast delivery through the proper tree. This checks the relevant result after inspect MSDP peer state and source-active information, then configure the permitted peer relationships.
Incorrect Answers
B:“The selected upstream RPF neighbor and packet arrival interface agree, restoring intended multicast flow” belongs to a separate IP Multicast issue: a multicast team changes unicast routing yet an engineered multicast RPF table still points to an obsolete next hop. It does not explain the condition tested here.
C:“The specified groups remain within the approved scope while unrelated enterprise multicast flows continue” belongs to a separate IP Multicast issue: a laboratory's multicast test group leaks to the corporate backbone despite a requirement to keep it within the lab. It does not explain the condition tested here.
D:“RPF counters and expected (S,G) forwarding stabilize after the route change” belongs to a separate IP Multicast issue: a stream uses asymmetric unicast routing; multicast forwarding fails intermittently although individual host routes work. It does not explain the condition tested here.
Question 1090
The team believes it has resolved this Junos issue: A RADIUS server reports no Access-Request for a silent legacy terminal, while switch timers show no EAP response. Which observation best verifies the specific intended result?
- The observed authentication state identifies missing supplicant response, and the approved method onboards the endpoint.
- Only the inventoried device has the expected limited connectivity; rogue or unknown hardware is denied.
- Authenticated corporate devices use strong EAP policies while designated legacy endpoints use restricted fallback.
- The registered device is authorized with limited access; an unknown MAC remains blocked.
Explanation
Correct Answer
A:The observed authentication state identifies missing supplicant response, and the approved method onboards the endpoint. This checks the relevant result after inspect packet exchange and classify the endpoint before selecting a supported fallback method.
Incorrect Answers
B:“Only the inventoried device has the expected limited connectivity; rogue or unknown hardware is denied” belongs to a separate Layer 2 Authentication and Access Control issue: a printer's MAC address is duplicated by an unauthorized endpoint that obtains the same weak MAC-based policy. It does not explain the condition tested here.
C:“Authenticated corporate devices use strong EAP policies while designated legacy endpoints use restricted fallback” belongs to a separate Layer 2 Authentication and Access Control issue: two authentication methods are enabled on a shared switch port but fallback ordering bypasses a successful 802.1X result. It does not explain the condition tested here.
D:“The registered device is authorized with limited access; an unknown MAC remains blocked” belongs to a separate Layer 2 Authentication and Access Control issue: an industrial sensor lacks a supplicant but needs restricted network authorization through a centralized identity service. It does not explain the condition tested here.
Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests