100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 1140
A Junos enterprise team investigates this incident: An application needs priority regardless of incoming DSCP, but an interface uses only a header-based classifier. Which technical explanation most directly identifies the cause or design principle?
- Shaping buffers and schedules outgoing traffic to a rate, unlike policing which marks or discards traffic exceeding a contract.
- Multifield classification can use packet fields for policy distinctions beyond incoming BA header code-point classification.
- Scheduler priority and bandwidth allocation affect queuing service but must balance fairness and starvation concerns.
- Junos egress rewrite rules map internal forwarding class and PLP back into supported packet header markings.
Explanation
Correct Answer
B:Multifield classification can use packet fields for policy distinctions beyond incoming BA header code-point classification. The appropriate response is to use a permitted firewall or multifield classifier matching the approved traffic fields and assign its forwarding class.
Incorrect Answers
A:“Shaping buffers and schedules outgoing traffic to a rate, unlike policing which marks or discards traffic exceeding a contract” belongs to a separate Class of Service (CoS) issue: a WAN customer requires smooth outbound transmission but an ingress drop policer creates unnecessary burst loss. It does not explain the condition tested here.
C:“Scheduler priority and bandwidth allocation affect queuing service but must balance fairness and starvation concerns” belongs to a separate Class of Service (CoS) issue: two queues use the same scheduler priority, but the business expects one to always win during contention. It does not explain the condition tested here.
D:“Junos egress rewrite rules map internal forwarding class and PLP back into supported packet header markings” belongs to a separate Class of Service (CoS) issue: a provider handoff expects specific code-point markings yet a trunk rewrites every service class to default behavior. It does not explain the condition tested here.
Question 1141
For this case, select TWO complementary measures or outcome checks that directly resolve the problem: BGP peers exchange IPv4 NLRI correctly but a planned IPv6 customer route never appears in inet6.0.
- Assume successful inet IPv4 routes imply that IPv6 NLRI is already negotiated.
- Use only the MED field as guaranteed proof of the selected route regardless of preceding BGP attributes.
- Enable the intended inet6 family consistently on eligible BGP peers and verify route policy and inet6.0.
- The expected IPv6 prefix is received in inet6.0 while IPv4 route exchange remains unchanged.
- Disable BGP AS-loop safeguards globally to accept any route repeating the local AS.
Explanation
Correct Answers
C:Enable the intended inet6 family consistently on eligible BGP peers and verify route policy and inet6.0. This addresses the dependency that BGP address-family negotiation controls which IPv4 or IPv6 NLRI can be exchanged independently of session state.
D:The expected IPv6 prefix is received in inet6.0 while IPv4 route exchange remains unchanged. The specific steps required are to enable the intended inet6 family consistently on eligible BGP peers and verify route policy and inet6.0.
Incorrect Answers
A:“Assume successful inet IPv4 routes imply that IPv6 NLRI is already negotiated” does not address BGP address-family negotiation controls which IPv4 or IPv6 NLRI can be exchanged independently of session state.
B:“Use only the MED field as guaranteed proof of the selected route regardless of preceding BGP attributes” is an unsafe response to a different problem: two equal LOCAL_PREF and AS-path candidates remain tied until MED influences the choice under the applicable comparison rules. It is not a valid fix here.
E:“Disable BGP AS-loop safeguards globally to accept any route repeating the local AS” is an unsafe response to a different problem: the local AS appears in a received external BGP AS_PATH and the route is rejected despite valid prefix reachability. It is not a valid fix here.
Question 1142
A Junos enterprise team investigates this incident: A second campus RP is deployed for availability but source-awareness synchronization is omitted where the design requires it. Which technical explanation most directly identifies the cause or design principle?
- Anycast RP aims for a stable RP address with multiple nodes; consistent source discovery and RP coordination are essential to the chosen architecture.
- Source-specific multicast uses (S,G) membership semantics and generally avoids ASM rendezvous-point discovery for that flow.
- Multicast administrative scoping must restrict eligible groups and outgoing boundaries; group addresses alone do not impose all policy.
- IP multicast replicates streams at forwarding branches instead of requiring a separate source-to-receiver unicast stream.
Explanation
Correct Answer
A:Anycast RP aims for a stable RP address with multiple nodes; consistent source discovery and RP coordination are essential to the chosen architecture. The appropriate response is to verify anycast RP address and supported source synchronization method across the participating RP nodes.
Incorrect Answers
B:“Source-specific multicast uses (S,G) membership semantics and generally avoids ASM rendezvous-point discovery for that flow” belongs to a separate IP Multicast issue: a controlled one-source data feed requires group membership constrained by both source and group, not arbitrary senders. It does not explain the condition tested here.
C:“Multicast administrative scoping must restrict eligible groups and outgoing boundaries; group addresses alone do not impose all policy” belongs to a separate IP Multicast issue: a laboratory's multicast test group leaks to the corporate backbone despite a requirement to keep it within the lab. It does not explain the condition tested here.
D:“IP multicast replicates streams at forwarding branches instead of requiring a separate source-to-receiver unicast stream” instead concerns another network scenario: A one-to-many lecture stream is configured as separate unicast connections and saturates a WAN link to a remote campus. It does not address the requirement here.
Question 1143
The team believes it has resolved this Junos issue: A legacy printer can join after MAC authentication yet is allowed to reach sensitive management segments. Which observation best verifies the specific intended result?
- The user sees a valid login prompt and receives only the approved post-login policy.
- A known-good supplicant completes EAP/RADIUS authentication and the port reaches its intended authorized state.
- The known device reaches only permitted destinations and cannot reach employee or management resources.
- A nonresponding guest gets its intended limited VLAN while invalid credentials never receive guest privilege.
Explanation
Correct Answer
C:The known device reaches only permitted destinations and cannot reach employee or management resources. This checks the relevant result after assign the authenticated device to the authorized restricted network profile and verify effective VLAN/filter.
Incorrect Answers
A:“The user sees a valid login prompt and receives only the approved post-login policy” belongs to a separate Layer 2 Authentication and Access Control issue: guest users on an EX switch see no captive login page because browser HTTP redirects are not being applied on the intended VLAN. It does not explain the condition tested here.
B:“A known-good supplicant completes EAP/RADIUS authentication and the port reaches its intended authorized state” belongs to a separate Layer 2 Authentication and Access Control issue: a corporate laptop presents valid 802.1X credentials but stays unauthorized because the switch is using the wrong RADIUS server profile. It does not explain the condition tested here.
D:“A nonresponding guest gets its intended limited VLAN while invalid credentials never receive guest privilege” belongs to a separate Layer 2 Authentication and Access Control issue: a switch assigns a misconfigured laptop with incorrect EAP credentials to a VLAN intended only for devices that never attempt 802.1X. It does not explain the condition tested here.
Question 1144
To prevent recurrence of this precise networking failure, which practice should be adopted? A VXLAN overlay's BGP EVPN routes are present, but the underlay cannot route to a remote VTEP loopback.
- Test multihoming election and per-VLAN failover after attaching new dual-homed devices.
- Validate EVPN Type 2 and Type 3 propagation separately in new VNI bring-up tests.
- Keep route-type purpose and acceptance checks in EVPN troubleshooting runbooks.
- Include underlay loopback reachability and MTU checks in VXLAN overlay deployment QA.
Explanation
Correct Answer
D:Include underlay loopback reachability and MTU checks in VXLAN overlay deployment QA. This guards against VXLAN encapsulates overlay traffic across an IP underlay; VTEP reachability is necessary even with valid BGP EVPN control-plane state.
Incorrect Answers
A:“Test multihoming election and per-VLAN failover after attaching new dual-homed devices” belongs to a separate EVPN issue: a dual-attached Ethernet segment experiences persistent duplicates during link recovery because multihoming election or ESI state differs. It does not explain the condition tested here.
B:“Validate EVPN Type 2 and Type 3 propagation separately in new VNI bring-up tests” belongs to a separate EVPN issue: a bridge domain has valid unicast Type 2 entries yet remote VTEPs do not discover a new participating segment for BUM forwarding. It does not explain the condition tested here.
C:“Keep route-type purpose and acceptance checks in EVPN troubleshooting runbooks” belongs to a separate EVPN issue: a fabric advertises Type 3 routes and claims this proves specific remote host MACs are reachable. It does not explain the condition tested here.
Question 1145
Select THREE complementary corrective, verification, or preventive controls for this scenario: An aggregation broadcast VLAN has a DR/BDR placement that conflicts with the approved design after a maintenance reboot.
- Neighbor states and DR/BDR assignments match the approved design following a managed election.
- Inspect network type, interface priority and existing election state, then plan a controlled DR/BDR change.
- Assume increasing OSPF priority immediately preempts an existing healthy DR on every device.
- Specify preferred OSPF DR candidates on shared transit segments and account for non-preemptive elections.
- Reset OSPFv3 adjacency repeatedly although the route exists as a nonactive candidate.
- Record a successful IPv4 echo response as conclusive proof that OSPFv3 is healthy.
Explanation
Correct Answers
A:Confirmation: Inspect network type, interface priority and existing election state, then plan a controlled DR/BDR change.
B:Correction: DR/BDR elections on OSPF broadcast networks affect LSA exchange and can be influenced by priority.
D:Prevention of recurrence: DR/BDR elections on OSPF broadcast networks affect LSA exchange and can be influenced by priority.
Incorrect Answers
C:“Assume increasing OSPF priority immediately preempts an existing healthy DR on every device” does not address DR/BDR elections on OSPF broadcast networks affect LSA exchange and can be influenced by priority.
E:“Reset OSPFv3 adjacency repeatedly although the route exists as a nonactive candidate” is an unsafe response to a different problem: an IPv6 route learned through OSPFv3 is absent from the forwarding table because a more preferred static route covers the same prefix. It is not a valid fix here.
F:“Record a successful IPv4 echo response as conclusive proof that OSPFv3 is healthy” is an unsafe response to a different problem: an OSPFv3 adjacency on a dual-stack campus changes state because engineers treat IPv4 interface reachability as proof of IPv6 control-plane health. It is not a valid fix here.
Question 1146
A Junos enterprise team investigates this incident: A corporate laptop presents valid 802.1X credentials but stays unauthorized because the switch is using the wrong RADIUS server profile. Which technical explanation most directly identifies the cause or design principle?
- 802.1X guest and fallback capabilities are platform and Junos variant specific; unsupported features must not be assumed.
- 802.1X authorization depends on the authenticator, supplicant and authentication-server conversation being correctly connected.
- Authentication-method precedence and session state can affect which effective authorization takes hold.
- MAC RADIUS provides a fallback identity mechanism for suitable non-802.1X devices, with weaker assurance than certificate-based 802.1X.
Explanation
Correct Answer
B:802.1X authorization depends on the authenticator, supplicant and authentication-server conversation being correctly connected. The appropriate response is to inspect switch authenticator state and RADIUS reachability and identity settings, then repair the approved server configuration.
Incorrect Answers
A:“802.1X guest and fallback capabilities are platform and Junos variant specific; unsupported features must not be assumed” belongs to a separate Layer 2 Authentication and Access Control issue: an access switch is moved to Junos OS Evolved but the team assumes every earlier guest-VLAN feature still exists on L2 802.1X interfaces. It does not explain the condition tested here.
C:“Authentication-method precedence and session state can affect which effective authorization takes hold” belongs to a separate Layer 2 Authentication and Access Control issue: two authentication methods are enabled on a shared switch port but fallback ordering bypasses a successful 802.1X result. It does not explain the condition tested here.
D:“MAC RADIUS provides a fallback identity mechanism for suitable non-802.1X devices, with weaker assurance than certificate-based 802.1X” belongs to a separate Layer 2 Authentication and Access Control issue: a non-802.1X network printer is consistently rejected because its access port permits only EAP supplicants. It does not explain the condition tested here.
Question 1147
A network change is required for the following specific situation: A branch dual-transit design sees the higher-preference provider route win even though its AS path has more hops. Which corrective action is most appropriate?
- Examine both attributes in the received route detail and update the explicit routing policy rather than guessing.
- Enable the intended inet6 family consistently on eligible BGP peers and verify route policy and inet6.0.
- Select a permitted inbound traffic-engineering mechanism with the provider, such as suitable AS-path prepending or agreed communities.
- Use precise route-filter match conditions and explicit rejection of unauthorized more-specific routes.
Explanation
Correct Answer
A:For eligible BGP candidates, LOCAL_PREF comparison precedes AS-path length, so AS-path length alone does not determine the winner. Verify this by checking that after policy correction, chosen path and attribute ordering match documented routing intent.
Incorrect Answers
B:“Enable the intended inet6 family consistently on eligible BGP peers and verify route policy and inet6.0” belongs to a separate Border Gateway Protocol (BGP) issue: a campus router's BGP IPv6 session is Established yet peers advertise only inet unicast family routes. It does not explain the condition tested here.
C:“Select a permitted inbound traffic-engineering mechanism with the provider, such as suitable AS-path prepending or agreed communities” belongs to a separate Border Gateway Protocol (BGP) issue: an operator tries to make a remote AS prefer one inbound path using LOCAL_PREF that the remote eBGP peer never receives. It does not explain the condition tested here.
D:“Use precise route-filter match conditions and explicit rejection of unauthorized more-specific routes” belongs to a separate Border Gateway Protocol (BGP) issue: an eBGP import policy unexpectedly accepts more-specific prefixes outside the approved customer allocation. It does not explain the condition tested here.
Question 1148
Which suggested shortcut would be especially unsafe for this exact situation? A customer access switch trusts external CoS bits and redistributes high-priority markings to all guest traffic.
- Let all untrusted clients self-select expedited forwarding marks without verification.
- Document trusted-marking boundaries and test both matched and unmatched multifield traffic.
- Test marking, PLP assignment and drop policy together rather than checking only DSCP fields.
- Test both average-rate enforcement and microburst tolerance for new policer profiles.
Explanation
Correct Answer
A:The tempting alternative fails because CoS rewrite must reflect trusted classifications and intended forwarding policy, not arbitrary source markings. The supported action is to define a controlled rewrite map for each class and verify high-priority markings remain restricted.
Incorrect Answers
B:That prevention measure relates to an application needs priority regardless of incoming DSCP, but an interface uses only a header-based classifier.; it is not the unsafe shortcut described here.
C:That prevention measure relates to a business wants out-of-profile marked traffic to drop earlier than in-profile traffic within one forwarding class.; it is not the unsafe shortcut described here.
D:That prevention measure relates to an uplink meets long-term bandwidth policy but legitimate short bursts exceed the token-bucket allowance.; it is not the unsafe shortcut described here.
Question 1149
Which suggested shortcut would be especially unsafe for this exact situation? A redistribution policy injects every static route into OSPF, including a maintenance-only prefix that should stay local.
- Keep IPv4 and IPv6 routing verification separate for dual-stack maintenance.
- Validate active logical-interface mappings and IPv6 adjacency as part of change acceptance.
- Set a blanket export accept action and rely on other routers to ignore sensitive prefixes.
- Verify both protocol RIB candidates and active next-hop selection in dual-stack change tests.
Explanation
Correct Answer
C:The tempting alternative fails because unrestricted OSPF export policy can originate unintended external routes, changing enterprise reachability. The supported action is to restrict the export policy to explicit approved route prefixes and protocols, then check external LSAs.
Incorrect Answers
A:That prevention measure relates to an IPv6 branch outage is misdiagnosed using only IPv4 pings, despite OSPFv3 neighbors using IPv6 link-local messaging.; it is not the unsafe shortcut described here.
B:That prevention measure relates to an IPv6-only branch has OSPFv3 Hellos on the wrong logical unit after interface renumbering, so no IPv6 routes appear.; it is not the unsafe shortcut described here.
D:That prevention measure relates to an IPv6 route learned through OSPFv3 is absent from the forwarding table because a more preferred static route covers the same prefix.; it is not the unsafe shortcut described here.
Question 1150
For this case, select TWO complementary measures or outcome checks that directly resolve the problem: A route policy lacks an explicit intended default action, and unmatched BGP prefixes behave differently than planned.
- Disable BGP AS-loop safeguards globally to accept any route repeating the local AS.
- Positive and negative prefix tests traverse the expected policy terms and produce approved import/export outcomes.
- Assume every unmatched policy term means a route is unconditionally accepted without checking protocol defaults.
- Document and test terminal accept or reject behavior along with next-term and next-policy handling.
- Increase the route's MED while leaving BGP transport reachability and hop settings incorrect.
Explanation
Correct Answers
B:Positive and negative prefix tests traverse the expected policy terms and produce approved import/export outcomes. The specific steps required are to document and test terminal accept or reject behavior along with next-term and next-policy handling.
D:Document and test terminal accept or reject behavior along with next-term and next-policy handling. This addresses the dependency that routing-policy evaluation depends on term matches, flow-control actions and the policy chain, including what happens on no match.
Incorrect Answers
A:“Disable BGP AS-loop safeguards globally to accept any route repeating the local AS” is an unsafe response to a different problem: the local AS appears in a received external BGP AS_PATH and the route is rejected despite valid prefix reachability. It is not a valid fix here.
C:“Assume every unmatched policy term means a route is unconditionally accepted without checking protocol defaults” does not address routing-policy evaluation depends on term matches, flow-control actions and the policy chain, including what happens on no match.
E:“Increase the route's MED while leaving BGP transport reachability and hop settings incorrect” is an unsafe response to a different problem: a multihop eBGP peer uses loopback addresses but its session times out when directly connected assumptions remain. It is not a valid fix here.
Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests