100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 1160
To prevent recurrence of this precise networking failure, which practice should be adopted? A router's OSPF neighbor restarts repeatedly because duplicate router IDs were assigned to different routing nodes.
- Reserve router IDs from a centrally managed inventory before zero-touch provisioning.
- Include a checklist of advertised IPv6 service and loopback addresses in OSPFv3 acceptance.
- Test one allowed and one forbidden route against each export policy term before deployment.
- Keep IPv4 and IPv6 routing verification separate for dual-stack maintenance.
Explanation
Correct Answer
A:Reserve router IDs from a centrally managed inventory before zero-touch provisioning. This guards against OSPF identifies routers by unique router ID; collisions can destabilize LSDB and adjacency behavior.
Incorrect Answers
B:“Include a checklist of advertised IPv6 service and loopback addresses in OSPFv3 acceptance” belongs to a separate Interior Gateway Protocols (IGPs) issue: a replacement router has IPv6 OSPFv3 adjacency yet does not advertise the loopback subnet required for monitoring. It does not explain the condition tested here.
C:“Test one allowed and one forbidden route against each export policy term before deployment” belongs to a separate Interior Gateway Protocols (IGPs) issue: an OSPF export term filters routes based on the wrong protocol, so an intended static default is not originated. It does not explain the condition tested here.
D:“Keep IPv4 and IPv6 routing verification separate for dual-stack maintenance” belongs to a separate Interior Gateway Protocols (IGPs) issue: an OSPFv3 adjacency on a dual-stack campus changes state because engineers treat IPv4 interface reachability as proof of IPv6 control-plane health. It does not explain the condition tested here.
Question 1161
A Junos enterprise team investigates this incident: Two queues use the same scheduler priority, but the business expects one to always win during contention. Which technical explanation most directly identifies the cause or design principle?
- Shaping buffers and schedules outgoing traffic to a rate, unlike policing which marks or discards traffic exceeding a contract.
- Junos egress rewrite rules map internal forwarding class and PLP back into supported packet header markings.
- Packet loss priority differentiates drop susceptibility within a forwarding class and works with the configured queue/drop behavior.
- Scheduler priority and bandwidth allocation affect queuing service but must balance fairness and starvation concerns.
Explanation
Correct Answer
D:Scheduler priority and bandwidth allocation affect queuing service but must balance fairness and starvation concerns. The appropriate response is to assign the intended service class and scheduler priorities with measured bandwidth needs, then validate.
Incorrect Answers
A:“Shaping buffers and schedules outgoing traffic to a rate, unlike policing which marks or discards traffic exceeding a contract” belongs to a separate Class of Service (CoS) issue: a WAN customer requires smooth outbound transmission but an ingress drop policer creates unnecessary burst loss. It does not explain the condition tested here.
B:“Junos egress rewrite rules map internal forwarding class and PLP back into supported packet header markings” belongs to a separate Class of Service (CoS) issue: a provider handoff expects specific code-point markings yet a trunk rewrites every service class to default behavior. It does not explain the condition tested here.
C:“Packet loss priority differentiates drop susceptibility within a forwarding class and works with the configured queue/drop behavior” belongs to a separate Class of Service (CoS) issue: a business wants out-of-profile marked traffic to drop earlier than in-profile traffic within one forwarding class. It does not explain the condition tested here.
Question 1162
The team believes it has resolved this Junos issue: A new leaf imports VNI reachability but packets disappear because its VXLAN tunnel endpoint IP is unresolved. Which observation best verifies the specific intended result?
- BUM traffic reaches only participating VTEPs and the remote endpoint can be discovered.
- The remote VTEP becomes reachable and encapsulated packets cross the fabric as intended.
- Both peers report a consistent Ethernet segment and failover preserves authorized connectivity.
- BUM traffic follows permitted designated-forwarder behavior with no persistent looping duplicates.
Explanation
Correct Answer
B:The remote VTEP becomes reachable and encapsulated packets cross the fabric as intended. This checks the relevant result after repair authorized underlay routing to remote VTEPs and check tunnel reachability before changing EVPN policies.
Incorrect Answers
A:“BUM traffic reaches only participating VTEPs and the remote endpoint can be discovered” belongs to a separate EVPN issue: a VNI is active on two leafs but unknown-unicast or broadcast replication never reaches the remote side. It does not explain the condition tested here.
C:“Both peers report a consistent Ethernet segment and failover preserves authorized connectivity” belongs to a separate EVPN issue: a shared Ethernet segment loses its fast convergence properties after an ESI-LAG peer receives an inconsistent configuration. It does not explain the condition tested here.
D:“BUM traffic follows permitted designated-forwarder behavior with no persistent looping duplicates” belongs to a separate EVPN issue: a dual-attached Ethernet segment experiences persistent duplicates during link recovery because multihoming election or ESI state differs. It does not explain the condition tested here.
Question 1163
The team believes it has resolved this Junos issue: A multihop eBGP peer uses loopback addresses but its session times out when directly connected assumptions remain. Which observation best verifies the specific intended result?
- The advertised set matches the documented inactive-BGP exception without changing local forwarding selection.
- A loopback-to-loopback BGP session becomes Established and exchanges only permitted NLRI.
- External peer advertisements show the intended supported attributes and inbound traffic is measured.
- The previously hidden BGP prefix resolves its next hop and becomes an eligible route.
Explanation
Correct Answer
B:A loopback-to-loopback BGP session becomes Established and exchanges only permitted NLRI. This checks the relevant result after verify endpoint reachability and configure appropriate multihop session parameters and security controls.
Incorrect Answers
A:“The advertised set matches the documented inactive-BGP exception without changing local forwarding selection” belongs to a separate Border Gateway Protocol (BGP) issue: an engineer adds advertise-inactive and downstream peers begin receiving a BGP route that loses to an OSPF route locally. It does not explain the condition tested here.
C:“External peer advertisements show the intended supported attributes and inbound traffic is measured” belongs to a separate Border Gateway Protocol (BGP) issue: an operator tries to make a remote AS prefer one inbound path using LOCAL_PREF that the remote eBGP peer never receives. It does not explain the condition tested here.
D:“The previously hidden BGP prefix resolves its next hop and becomes an eligible route” belongs to a separate Border Gateway Protocol (BGP) issue: an iBGP route is received from a reflector but hidden because its third-party next hop is unreachable in inet.0. It does not explain the condition tested here.
Question 1164
A network change is required for the following specific situation: A distribution node learns connected subnets but never sends Hello packets on its OSPF transit port due to passive-interface policy. Which corrective action is most appropriate?
- Remove passive behavior only from the approved router-to-router transit link and check Hello and neighbor states.
- Inspect inet6.0 route detail and route preferences before changing OSPFv3 neighbor configuration.
- Review external metric type and value at the originator, then apply the documented traffic-engineering policy.
- Restrict the export policy to explicit approved route prefixes and protocols, then check external LSAs.
Explanation
Correct Answer
A:Making a link passive suppresses OSPF adjacency formation even when its prefix remains eligible for advertisement. Verify this by checking that hellos are observed in the routing adjacency and a Full neighbor appears on the intended port.
Incorrect Answers
B:“Inspect inet6.0 route detail and route preferences before changing OSPFv3 neighbor configuration” belongs to a separate Interior Gateway Protocols (IGPs) issue: a team wrongly concludes OSPFv3 failed when inet6.0 shows a static route active and the OSPFv3 candidate inactive. It does not explain the condition tested here.
C:“Review external metric type and value at the originator, then apply the documented traffic-engineering policy” belongs to a separate Interior Gateway Protocols (IGPs) issue: a branch receives two external paths with different metric-type assumptions after a policy change and prefers the wrong exit. It does not explain the condition tested here.
D:“Restrict the export policy to explicit approved route prefixes and protocols, then check external LSAs” belongs to a separate Interior Gateway Protocols (IGPs) issue: an ABR starts leaking a management static route into the enterprise IGP after a permissive export term was introduced. It does not explain the condition tested here.
Question 1165
A Junos enterprise team investigates this incident: Customer traffic emerges with the provider service tag still attached and is rejected by an endpoint expecting ordinary Ethernet. Which technical explanation most directly identifies the cause or design principle?
- Private VLAN isolated ports are designed to limit lateral L2 communication while still reaching the permitted promiscuous uplink.
- Q-in-Q requires deliberate tagging and untagging at service boundaries, with customer tags retained according to the handoff contract.
- MSTP maps VLANs into a smaller set of spanning-tree instances, providing scalable per-group path control.
- A private VLAN community allows permitted communication within its community; isolated behavior is stricter.
Explanation
Correct Answer
B:Q-in-Q requires deliberate tagging and untagging at service boundaries, with customer tags retained according to the handoff contract. The appropriate response is to inspect the ingress/egress tag-processing configuration and correct the service handoff encapsulation.
Incorrect Answers
A:“Private VLAN isolated ports are designed to limit lateral L2 communication while still reaching the permitted promiscuous uplink” belongs to a separate Ethernet Switching and Spanning Tree issue: a lab uses one primary VLAN for many tenants but isolated access ports can still exchange Layer 2 frames after a misconfiguration. It does not explain the condition tested here.
C:“MSTP maps VLANs into a smaller set of spanning-tree instances, providing scalable per-group path control” belongs to a separate Ethernet Switching and Spanning Tree issue: a network uses one VLAN-wide topology but wants two forwarding trees for different groups without an instance for every VLAN. It does not explain the condition tested here.
D:“A private VLAN community allows permitted communication within its community; isolated behavior is stricter” belongs to a separate Ethernet Switching and Spanning Tree issue: members of the same trusted workgroup are accidentally placed in isolated rather than community PVLAN ports and lose peer communication. It does not explain the condition tested here.
Question 1166
A Junos enterprise team investigates this incident: A route with a permissive policy term is accepted before a later deny term can block it. Which technical explanation most directly identifies the cause or design principle?
- Multihop BGP peerings require suitable routing to endpoint addresses and peer-session settings for nonadjacent endpoints.
- Routing-policy term order and terminal actions determine whether later conditions are evaluated.
- BGP typically prefers a larger LOCAL_PREF among otherwise eligible candidates before later path-selection tie breakers.
- Routing-policy evaluation depends on term matches, flow-control actions and the policy chain, including what happens on no match.
Explanation
Correct Answer
B:Routing-policy term order and terminal actions determine whether later conditions are evaluated. The appropriate response is to put specific deny conditions before broad acceptance, and test the policy with representative routes.
Incorrect Answers
A:“Multihop BGP peerings require suitable routing to endpoint addresses and peer-session settings for nonadjacent endpoints” belongs to a separate Border Gateway Protocol (BGP) issue: a transit peering is moved off directly connected interface IPs to loopbacks yet the TTL and reachability design are not updated. It does not explain the condition tested here.
C:“BGP typically prefers a larger LOCAL_PREF among otherwise eligible candidates before later path-selection tie breakers” belongs to a separate Border Gateway Protocol (BGP) issue: an enterprise chooses a different BGP exit after import policy assigns a higher local preference to the backup path. It does not explain the condition tested here.
D:“Routing-policy evaluation depends on term matches, flow-control actions and the policy chain, including what happens on no match” belongs to a separate Border Gateway Protocol (BGP) issue: a route policy lacks an explicit intended default action, and unmatched BGP prefixes behave differently than planned. It does not explain the condition tested here.
Question 1167
A Junos enterprise team investigates this incident: A receiver domain requires discovery of sources known behind another RP, yet inter-RP source information exchange is absent. Which technical explanation most directly identifies the cause or design principle?
- Junos multicast RPF may use a dedicated routing table, so the effective RPF path must be inspected, not guessed from unicast traffic.
- Reverse Path Forwarding checks whether multicast packets arrive on the interface selected toward the source or tree root.
- Source-specific multicast uses (S,G) membership semantics and generally avoids ASM rendezvous-point discovery for that flow.
- MSDP is used in applicable ASM inter-RP designs to exchange active-source information between rendezvous points.
Explanation
Correct Answer
D:MSDP is used in applicable ASM inter-RP designs to exchange active-source information between rendezvous points. The appropriate response is to inspect MSDP peer state and source-active information, then configure the permitted peer relationships.
Incorrect Answers
A:“Junos multicast RPF may use a dedicated routing table, so the effective RPF path must be inspected, not guessed from unicast traffic” belongs to a separate IP Multicast issue: a campus uses a separate inet.2 multicast RPF table and investigators inspect only inet.0, overlooking a stale source route. It does not explain the condition tested here.
B:“Reverse Path Forwarding checks whether multicast packets arrive on the interface selected toward the source or tree root” belongs to a separate IP Multicast issue: multicast packets arrive on the wrong uplink after unicast routing changes and are dropped by the campus core. It does not explain the condition tested here.
C:“Source-specific multicast uses (S,G) membership semantics and generally avoids ASM rendezvous-point discovery for that flow” belongs to a separate IP Multicast issue: a controlled one-source data feed requires group membership constrained by both source and group, not arbitrary senders. It does not explain the condition tested here.
Question 1168
To prevent recurrence of this precise networking failure, which practice should be adopted? A voice VLAN is configured correctly yet the switch's trust and rewrite policy fails to preserve the required phone traffic classification.
- Include LLDP-MED capabilities and network-policy TLVs in phone-vendor acceptance testing.
- Keep a prioritized PoE inventory and test behavior after PSU or stack changes.
- Include end-to-end marking tests when deploying voice VLANs and new phone models.
- Validate PD power profiles and test peak draw rather than idle boot alone.
Explanation
Correct Answer
C:Include end-to-end marking tests when deploying voice VLANs and new phone models. This guards against voice VLAN placement and CoS marking are related but separate; correct VLAN tagging does not guarantee priority handling.
Incorrect Answers
A:“Include LLDP-MED capabilities and network-policy TLVs in phone-vendor acceptance testing” belongs to a separate IP Telephony Features issue: a vendor handset discovers its neighbor using basic LLDP but does not learn the configured network policy for voice tagging. It does not explain the condition tested here.
B:“Keep a prioritized PoE inventory and test behavior after PSU or stack changes” belongs to a separate IP Telephony Features issue: a switch assigns equal PoE power priority to every port and disconnects an emergency phone before low-priority signage during a power shortage. It does not explain the condition tested here.
D:“Validate PD power profiles and test peak draw rather than idle boot alone” belongs to a separate IP Telephony Features issue: an emergency intercom can establish Ethernet link but loses power during activity because its PD class is not supported by that port. It does not explain the condition tested here.
Question 1169
To prevent recurrence of this precise networking failure, which practice should be adopted? A dual-attached Ethernet segment experiences persistent duplicates during link recovery because multihoming election or ESI state differs.
- Include underlay loopback reachability and MTU checks in VXLAN overlay deployment QA.
- Test multihoming election and per-VLAN failover after attaching new dual-homed devices.
- Track route import, MAC mobility and aging during host migration tests.
- Maintain a central VNI registry and test cross-tenant isolation on each leaf rollout.
Explanation
Correct Answer
B:Test multihoming election and per-VLAN failover after attaching new dual-homed devices. This guards against EVPN multihoming uses Ethernet segment identification and designated-forwarder or split-horizon rules to avoid loops.
Incorrect Answers
A:“Include underlay loopback reachability and MTU checks in VXLAN overlay deployment QA” belongs to a separate EVPN issue: a VXLAN overlay's BGP EVPN routes are present, but the underlay cannot route to a remote VTEP loopback. It does not explain the condition tested here.
C:“Track route import, MAC mobility and aging during host migration tests” belongs to a separate EVPN issue: a new endpoint MAC is learned at a remote VTEP but never reaches the receiving leaf's EVPN control-plane table. It does not explain the condition tested here.
D:“Maintain a central VNI registry and test cross-tenant isolation on each leaf rollout” belongs to a separate EVPN issue: a fabric uses conflicting VLAN-to-VNI mappings on two leaf switches, bridging different tenant segments together. It does not explain the condition tested here.
Question 1170
Which suggested shortcut would be especially unsafe for this exact situation? An ABR starts leaking a management static route into the enterprise IGP after a permissive export term was introduced.
- Keep timer settings in shared configuration templates and validate both directions before rollout.
- Keep IPv4 and IPv6 routing verification separate for dual-stack maintenance.
- Validate active logical-interface mappings and IPv6 adjacency as part of change acceptance.
- Set a blanket export accept action and rely on other routers to ignore sensitive prefixes.
Explanation
Correct Answer
D:The tempting alternative fails because unrestricted OSPF export policy can originate unintended external routes, changing enterprise reachability. The supported action is to restrict the export policy to explicit approved route prefixes and protocols, then check external LSAs.
Incorrect Answers
A:That prevention measure relates to two OSPF routers on a shared transit segment report different Hello and dead intervals and never establish adjacency.; it is not the unsafe shortcut described here.
B:That prevention measure relates to an OSPFv3 adjacency on a dual-stack campus changes state because engineers treat IPv4 interface reachability as proof of IPv6 control-plane health.; it is not the unsafe shortcut described here.
C:That prevention measure relates to an IPv6-only branch has OSPFv3 Hellos on the wrong logical unit after interface renumbering, so no IPv6 routes appear.; it is not the unsafe shortcut described here.
Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests