100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 10
A Junos enterprise team investigates this incident: A branch link should pace scheduled traffic to a slower uplink yet the team only drops excess packets abruptly. Which technical explanation most directly identifies the cause or design principle?
- Shaping buffers and schedules outgoing traffic to a rate, unlike policing which marks or discards traffic exceeding a contract.
- Queue schedulers and buffer parameters influence service rate and delay/drop behavior at congested egress.
- CoS rewrite must reflect trusted classifications and intended forwarding policy, not arbitrary source markings.
- Junos ingress classifiers map packet header code points to forwarding classes and packet loss priority, subject to interface attachment.
Explanation
Correct Answer
A:Shaping buffers and schedules outgoing traffic to a rate, unlike policing which marks or discards traffic exceeding a contract. The appropriate response is to configure supported egress shaping at the bottleneck and verify throughput and queue behavior.
Incorrect Answers
B:“Queue schedulers and buffer parameters influence service rate and delay/drop behavior at congested egress” belongs to a separate Class of Service (CoS) issue: video gets dropped under congestion despite spare capacity because its queue has a too-small delay buffer. It does not explain the condition tested here.
C:“CoS rewrite must reflect trusted classifications and intended forwarding policy, not arbitrary source markings” belongs to a separate Class of Service (CoS) issue: a branch egress rewriter incorrectly gives bulk backups the same DSCP as real-time voice. It does not explain the condition tested here.
D:“Junos ingress classifiers map packet header code points to forwarding classes and packet loss priority, subject to interface attachment” belongs to a separate Class of Service (CoS) issue: voice packets arrive with DSCP EF but are placed into the best-effort queue after a new access interface template is applied. It does not explain the condition tested here.
Question 11
A Junos enterprise team investigates this incident: An IPv6-only branch has OSPFv3 Hellos on the wrong logical unit after interface renumbering, so no IPv6 routes appear. Which technical explanation most directly identifies the cause or design principle?
- Local import policy can affect installed route visibility independently of the remote origination of LSAs.
- OSPF database-description exchange can stall when adjacent interfaces disagree on MTU even though basic Hello connectivity exists.
- OSPFv3 adjacency depends on participating interfaces and valid IPv6 link-local neighbor communication.
- OSPF identifies routers by unique router ID; collisions can destabilize LSDB and adjacency behavior.
Explanation
Correct Answer
C:OSPFv3 adjacency depends on participating interfaces and valid IPv6 link-local neighbor communication. The appropriate response is to move OSPFv3 participation to the correct active interface and verify neighbor and IPv6 RIB state.
Incorrect Answers
A:“Local import policy can affect installed route visibility independently of the remote origination of LSAs” belongs to a separate Interior Gateway Protocols (IGPs) issue: a core node shows a missing route while remote LSDBs include the corresponding external LSA after a local policy change. It does not explain the condition tested here.
B:“OSPF database-description exchange can stall when adjacent interfaces disagree on MTU even though basic Hello connectivity exists” belongs to a separate Interior Gateway Protocols (IGPs) issue: two EX distribution routers in OSPF area 0 remain in ExStart after a new transit VLAN uses inconsistent interface MTUs. It does not explain the condition tested here.
D:“OSPF identifies routers by unique router ID; collisions can destabilize LSDB and adjacency behavior” belongs to a separate Interior Gateway Protocols (IGPs) issue: a router's OSPF neighbor restarts repeatedly because duplicate router IDs were assigned to different routing nodes. It does not explain the condition tested here.
Question 12
The team believes it has resolved this Junos issue: An iBGP route is received from a reflector but hidden because its third-party next hop is unreachable in inet.0. Which observation best verifies the specific intended result?
- A loopback-to-loopback BGP session becomes Established and exchanges only permitted NLRI.
- The previously hidden BGP prefix resolves its next hop and becomes an eligible route.
- The expected IPv6 prefix is received in inet6.0 while IPv4 route exchange remains unchanged.
- The advertised set matches the documented inactive-BGP exception without changing local forwarding selection.
Explanation
Correct Answer
B:The previously hidden BGP prefix resolves its next hop and becomes an eligible route. This checks the relevant result after restore permitted next-hop reachability via IGP or adjust next-hop policy where appropriate; recheck route detail.
Incorrect Answers
A:“A loopback-to-loopback BGP session becomes Established and exchanges only permitted NLRI” belongs to a separate Border Gateway Protocol (BGP) issue: a transit peering is moved off directly connected interface IPs to loopbacks yet the TTL and reachability design are not updated. It does not explain the condition tested here.
C:“The expected IPv6 prefix is received in inet6.0 while IPv4 route exchange remains unchanged” belongs to a separate Border Gateway Protocol (BGP) issue: a campus router's BGP IPv6 session is Established yet peers advertise only inet unicast family routes. It does not explain the condition tested here.
D:“The advertised set matches the documented inactive-BGP exception without changing local forwarding selection” belongs to a separate Border Gateway Protocol (BGP) issue: a BGP export policy advertises a prefix that exists only as an inactive local candidate, despite an expectation of default active-only behavior. It does not explain the condition tested here.
Question 13
The team believes it has resolved this Junos issue: An access router has many queue definitions but unexpected class-to-queue mappings cause control traffic to be delayed. Which observation best verifies the specific intended result?
- Drop counters and queue utilization follow the intended curve through increasing load.
- Controlled traffic probes pass valid bursts without permitting sustained rate violations.
- Control-plane-related traffic receives the expected queue treatment under simulated load.
- Under controlled congestion, critical media meets its objective while permitted best-effort traffic still progresses.
Explanation
Correct Answer
C:Control-plane-related traffic receives the expected queue treatment under simulated load. This checks the relevant result after review the forwarding class and queue map for control and data traffic and apply the intended assignments.
Incorrect Answers
A:“Drop counters and queue utilization follow the intended curve through increasing load” belongs to a separate Class of Service (CoS) issue: a RED drop profile is applied too aggressively and drops packets even under moderate load. It does not explain the condition tested here.
B:“Controlled traffic probes pass valid bursts without permitting sustained rate violations” belongs to a separate Class of Service (CoS) issue: a traffic policer drops small microbursts despite an acceptable average rate because its configured burst size is too tight. It does not explain the condition tested here.
D:“Under controlled congestion, critical media meets its objective while permitted best-effort traffic still progresses” belongs to a separate Class of Service (CoS) issue: two queues use the same scheduler priority, but the business expects one to always win during contention. It does not explain the condition tested here.
Question 14
For this case, select TWO complementary measures or outcome checks that directly resolve the problem: A router's OSPF neighbor restarts repeatedly because duplicate router IDs were assigned to different routing nodes.
- Raise interface OSPF costs without resolving the duplicated router IDs.
- Assign unique stable router IDs, confirm interfaces, and recheck adjacency and LSDB after controlled reconvergence.
- Configure IPv4 OSPFv2 alone and expect it to populate IPv6 unicast routes automatically.
- No router-ID collision appears and OSPF paths stabilize with expected next hops.
- Set a blanket export accept action and rely on other routers to ignore sensitive prefixes.
Explanation
Correct Answers
B:Assign unique stable router IDs, confirm interfaces, and recheck adjacency and LSDB after controlled reconvergence. This addresses the dependency that OSPF identifies routers by unique router ID; collisions can destabilize LSDB and adjacency behavior.
D:No router-ID collision appears and OSPF paths stabilize with expected next hops. The specific steps required are to assign unique stable router IDs, confirm interfaces, and recheck adjacency and LSDB after controlled reconvergence.
Incorrect Answers
A:“Raise interface OSPF costs without resolving the duplicated router IDs” does not address OSPF identifies routers by unique router ID; collisions can destabilize LSDB and adjacency behavior.
C:“Configure IPv4 OSPFv2 alone and expect it to populate IPv6 unicast routes automatically” is an unsafe response to a different problem: a new IPv6 peering uses OSPFv3 on a retired VLAN unit rather than the active routed transit interface. It is not a valid fix here.
E:“Set a blanket export accept action and rely on other routers to ignore sensitive prefixes” is an unsafe response to a different problem: a redistribution policy injects every static route into OSPF, including a maintenance-only prefix that should stay local. It is not a valid fix here.
Question 15
To prevent recurrence of this precise networking failure, which practice should be adopted? A new endpoint MAC is learned at a remote VTEP but never reaches the receiving leaf's EVPN control-plane table.
- Test multihoming election and per-VLAN failover after attaching new dual-homed devices.
- Audit ESI consistency and platform-supported multihoming mode across paired leafs.
- Track route import, MAC mobility and aging during host migration tests.
- Include encapsulation headroom and path MTU tests in EVPN-VXLAN design validation.
Explanation
Correct Answer
C:Track route import, MAC mobility and aging during host migration tests. This guards against EVPN Type 2 MAC/IP advertisement carries endpoint reachability and mobility information in the control plane.
Incorrect Answers
A:“Test multihoming election and per-VLAN failover after attaching new dual-homed devices” belongs to a separate EVPN issue: a dual-attached Ethernet segment experiences persistent duplicates during link recovery because multihoming election or ESI state differs. It does not explain the condition tested here.
B:“Audit ESI consistency and platform-supported multihoming mode across paired leafs” belongs to a separate EVPN issue: a multihomed CE is attached to two leafs but one leaf advertises a different ESI, preventing expected redundancy behavior. It does not explain the condition tested here.
D:“Include encapsulation headroom and path MTU tests in EVPN-VXLAN design validation” belongs to a separate EVPN issue: an EVPN-VXLAN frame is dropped over a path where the IP underlay MTU was sized only for unencapsulated Ethernet payloads. It does not explain the condition tested here.
Question 16
A Junos enterprise team investigates this incident: A campus OSPF interface is accidentally placed in area 0 while its neighbor advertises a nonbackbone area, preventing a Full adjacency. Which technical explanation most directly identifies the cause or design principle?
- OSPF neighbors must agree on the area context to form adjacency on the common link.
- Routing-policy match criteria must align with the source route type and the intended OSPF export behavior.
- OSPF external route costs and metric types affect path choice and must reflect intended topology and failover behavior.
- Unrestricted OSPF export policy can originate unintended external routes, changing enterprise reachability.
Explanation
Correct Answer
A:OSPF neighbors must agree on the area context to form adjacency on the common link. The appropriate response is to compare configured interface areas with the approved topology and put both interfaces in the intended matching area.
Incorrect Answers
B:“Routing-policy match criteria must align with the source route type and the intended OSPF export behavior” belongs to a separate Interior Gateway Protocols (IGPs) issue: a branch default-route injection stops after a policy matches OSPF-learned routes instead of the intended local static. It does not explain the condition tested here.
C:“OSPF external route costs and metric types affect path choice and must reflect intended topology and failover behavior” belongs to a separate Interior Gateway Protocols (IGPs) issue: a branch receives two external paths with different metric-type assumptions after a policy change and prefers the wrong exit. It does not explain the condition tested here.
D:“Unrestricted OSPF export policy can originate unintended external routes, changing enterprise reachability” belongs to a separate Interior Gateway Protocols (IGPs) issue: an ABR starts leaking a management static route into the enterprise IGP after a permissive export term was introduced. It does not explain the condition tested here.
Question 17
A network change is required for the following specific situation: Two authentication methods are enabled on a shared switch port but fallback ordering bypasses a successful 802.1X result. Which corrective action is most appropriate?
- Inspect packet exchange and classify the endpoint before selecting a supported fallback method.
- Inspect supported method sequencing and enforce the approved 802.1X-first and MAC-exception behavior.
- Inspect switch authenticator state and RADIUS reachability and identity settings, then repair the approved server configuration.
- Confirm the actual device and approved MAC record, then restrict the resulting authorization and add compensating controls.
Explanation
Correct Answer
B:Authentication-method precedence and session state can affect which effective authorization takes hold. Verify this by checking that authenticated corporate devices use strong EAP policies while designated legacy endpoints use restricted fallback.
Incorrect Answers
A:“Inspect packet exchange and classify the endpoint before selecting a supported fallback method” belongs to a separate Layer 2 Authentication and Access Control issue: a RADIUS server reports no Access-Request for a silent legacy terminal, while switch timers show no EAP response. It does not explain the condition tested here.
C:“Inspect switch authenticator state and RADIUS reachability and identity settings, then repair the approved server configuration” belongs to a separate Layer 2 Authentication and Access Control issue: a campus access interface keeps a compliant supplicant blocked while EAP requests never reach the expected authentication backend. It does not explain the condition tested here.
D:“Confirm the actual device and approved MAC record, then restrict the resulting authorization and add compensating controls” belongs to a separate Layer 2 Authentication and Access Control issue: a printer's MAC address is duplicated by an unauthorized endpoint that obtains the same weak MAC-based policy. It does not explain the condition tested here.
Question 18
To prevent recurrence of this precise networking failure, which practice should be adopted? A WAN customer requires smooth outbound transmission but an ingress drop policer creates unnecessary burst loss.
- Review queue buffer tradeoffs and regression-test peak loads before tuning schedulers.
- Plan buffer and shaping rates against provider handoff capacity and expected burst size.
- Test classifier attachment and DSCP mappings on every access and aggregation ingress template.
- Validate classifier, scheduler map and interface association as a complete CoS chain.
Explanation
Correct Answer
B:Plan buffer and shaping rates against provider handoff capacity and expected burst size. This guards against shaping buffers and schedules outgoing traffic to a rate, unlike policing which marks or discards traffic exceeding a contract.
Incorrect Answers
A:“Review queue buffer tradeoffs and regression-test peak loads before tuning schedulers” belongs to a separate Class of Service (CoS) issue: a backup traffic queue consumes too much buffer and latency-sensitive applications starve during peak bursts. It does not explain the condition tested here.
C:“Test classifier attachment and DSCP mappings on every access and aggregation ingress template” belongs to a separate Class of Service (CoS) issue: voice packets arrive with DSCP EF but are placed into the best-effort queue after a new access interface template is applied. It does not explain the condition tested here.
D:“Validate classifier, scheduler map and interface association as a complete CoS chain” belongs to a separate Class of Service (CoS) issue: a low-latency queue is correctly classified but voice delays because its egress scheduler map is absent from the trunk. It does not explain the condition tested here.
Question 19
To prevent recurrence of this precise networking failure, which practice should be adopted? An access port is placed in single-supplicant mode but a desk phone and PC must authenticate separately behind the same port.
- Classify interactive and headless endpoint requirements before choosing the access method.
- Include downstream device count and authentication method in desk-port templates.
- Review authorization policies for MAC endpoints against a least-privilege access matrix.
- Track hardware, software edition and port family when standardizing access policies.
Explanation
Correct Answer
B:Include downstream device count and authentication method in desk-port templates. This guards against 802.1X host-mode selection affects whether multiple downstream devices can be independently authenticated and authorized.
Incorrect Answers
A:“Classify interactive and headless endpoint requirements before choosing the access method” belongs to a separate Layer 2 Authentication and Access Control issue: a noninteractive sensor is trapped in captive-portal onboarding because operators selected browser authentication for all endpoints. It does not explain the condition tested here.
C:“Review authorization policies for MAC endpoints against a least-privilege access matrix” belongs to a separate Layer 2 Authentication and Access Control issue: a legacy printer can join after MAC authentication yet is allowed to reach sensitive management segments. It does not explain the condition tested here.
D:“Track hardware, software edition and port family when standardizing access policies” belongs to a separate Layer 2 Authentication and Access Control issue: an engineer copies legacy 802.1X fallback settings to a platform whose supported feature matrix excludes them. It does not explain the condition tested here.
Question 20
For this case, select TWO complementary measures or outcome checks that directly resolve the problem: A laboratory's multicast test group leaks to the corporate backbone despite a requirement to keep it within the lab.
- Configure group-aware multicast routing policy and boundary filters at intended exits, then verify forwarding.
- Treat SSM group membership as source-agnostic and subscribe to the group without source information.
- The specified groups remain within the approved scope while unrelated enterprise multicast flows continue.
- Enable the same full-bandwidth unicast copy to every receiver and call it multicast optimization.
- Use a unique group name as the only security boundary and rely on routers to infer its scope.
Explanation
Correct Answers
A:Configure group-aware multicast routing policy and boundary filters at intended exits, then verify forwarding. This addresses the dependency that multicast administrative scoping must restrict eligible groups and outgoing boundaries; group addresses alone do not impose all policy.
C:The specified groups remain within the approved scope while unrelated enterprise multicast flows continue. The specific steps required are to configure group-aware multicast routing policy and boundary filters at intended exits, then verify forwarding.
Incorrect Answers
B:“Treat SSM group membership as source-agnostic and subscribe to the group without source information” is an unsafe response to a different problem: a campus multicast application migrates ASM clients to SSM but does not update the source-qualified membership requests. It is not a valid fix here.
D:“Enable the same full-bandwidth unicast copy to every receiver and call it multicast optimization” is an unsafe response to a different problem: a trading-data sender needs to serve many local subscribers, but each listener receives its own redundant copy over the backbone. It is not a valid fix here.
E:“Use a unique group name as the only security boundary and rely on routers to infer its scope” does not address multicast administrative scoping must restrict eligible groups and outgoing boundaries; group addresses alone do not impose all policy.
Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests