Juniper JN0-650 Exam Dumps, Practice Test Questions

100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Juniper JN0-650  Premium File
$54.99
$49.99

JN0-650 Premium File

  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

JN0-650 Premium File

Juniper JN0-650  Premium File
  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$54.99
$49.99

Juniper JN0-650 Practice Test 38

Question 370

To prevent recurrence of this precise networking failure, which practice should be adopted? A private L2 service must extend customer control protocols, yet the provider fabric consumes or drops the customer's BPDUs.

  1. Track MSTP instance scale and maintain identical region parameters across participating switches.
  2. Scope and monitor tunneled L2 control protocols to prevent control-plane abuse.
  3. Test private-port isolation and uplink reachability after access topology changes.
  4. Keep explicit root priority policy and validate elections after device replacement.

Explanation

Correct Answer

B:

Scope and monitor tunneled L2 control protocols to prevent control-plane abuse. This guards against layer 2 protocol tunneling preserves selected customer control traffic across a service where ordinary data tagging is not enough.

Incorrect Answers

A:

“Track MSTP instance scale and maintain identical region parameters across participating switches” belongs to a separate Ethernet Switching and Spanning Tree issue: a large campus places hundreds of VLANs in separate spanning-tree instances and reaches scale or CPU limits. It does not explain the condition tested here.

C:

“Test private-port isolation and uplink reachability after access topology changes” belongs to a separate Ethernet Switching and Spanning Tree issue: a lab uses one primary VLAN for many tenants but isolated access ports can still exchange Layer 2 frames after a misconfiguration. It does not explain the condition tested here.

D:

“Keep explicit root priority policy and validate elections after device replacement” belongs to a separate Ethernet Switching and Spanning Tree issue: a switch with an unexpectedly low bridge priority becomes MSTP root and redirects aggregation traffic through an access closet. It does not explain the condition tested here.

Question 371

To prevent recurrence of this precise networking failure, which practice should be adopted? An application needs priority regardless of incoming DSCP, but an interface uses only a header-based classifier.

  1. Test ingress classification separately from egress rewrite at every trust boundary.
  2. Document trusted-marking boundaries and test both matched and unmatched multifield traffic.
  3. Audit DSCP preservation and remarking at untrusted edge boundaries.
  4. Differentiate ingress policing from egress shaping when designing bandwidth controls.

Explanation

Correct Answer

B:

Document trusted-marking boundaries and test both matched and unmatched multifield traffic. This guards against multifield classification can use packet fields for policy distinctions beyond incoming BA header code-point classification.

Incorrect Answers

A:

“Test ingress classification separately from egress rewrite at every trust boundary” belongs to a separate Class of Service (CoS) issue: a provider handoff expects specific code-point markings yet a trunk rewrites every service class to default behavior. It does not explain the condition tested here.

C:

“Audit DSCP preservation and remarking at untrusted edge boundaries” belongs to a separate Class of Service (CoS) issue: a branch egress rewriter incorrectly gives bulk backups the same DSCP as real-time voice. It does not explain the condition tested here.

D:

“Differentiate ingress policing from egress shaping when designing bandwidth controls” belongs to a separate Class of Service (CoS) issue: a guest network should be rate-limited at ingress, but engineers configure only an egress shaper on the uplink. It does not explain the condition tested here.

Question 372

A network change is required for the following specific situation: An Anycast RP design uses two RP addresses that do not share the intended anycast identity, producing inconsistent joins. Which corrective action is most appropriate?

  1. Compare source-route preference with actual multicast ingress and restore a consistent authorized upstream path.
  2. Design a multicast distribution tree with explicit receiver memberships and test only the subscribed delivery paths.
  3. Verify anycast RP address and supported source synchronization method across the participating RP nodes.
  4. Refine the relevant multicast policy ranges and inspect forwarding for both permitted and denied groups.

Explanation

Correct Answer

C:

Anycast RP aims for a stable RP address with multiple nodes; consistent source discovery and RP coordination are essential to the chosen architecture. Verify this by checking that a failure of one RP does not strand subscribers and remaining RPs maintain correct multicast source awareness.

Incorrect Answers

A:

“Compare source-route preference with actual multicast ingress and restore a consistent authorized upstream path” belongs to a separate IP Multicast issue: a redundant network changes the preferred route to the source while packets keep arriving on the other physical link. It does not explain the condition tested here.

B:

“Design a multicast distribution tree with explicit receiver memberships and test only the subscribed delivery paths” belongs to a separate IP Multicast issue: a trading-data sender needs to serve many local subscribers, but each listener receives its own redundant copy over the backbone. It does not explain the condition tested here.

D:

“Refine the relevant multicast policy ranges and inspect forwarding for both permitted and denied groups” belongs to a separate IP Multicast issue: an edge router uses a broad multicast filter that blocks valid collaboration groups alongside restricted lab streams. It does not explain the condition tested here.

Question 373

Which suggested shortcut would be especially unsafe for this exact situation? An OSPFv3 adjacency on a dual-stack campus changes state because engineers treat IPv4 interface reachability as proof of IPv6 control-plane health.

  1. Specify preferred OSPF DR candidates on shared transit segments and account for non-preemptive elections.
  2. Record a successful IPv4 echo response as conclusive proof that OSPFv3 is healthy.
  3. Reserve router IDs from a centrally managed inventory before zero-touch provisioning.
  4. Record both LSDB presence and local RIB installation in OSPF troubleshooting runbooks.

Explanation

Correct Answer

B:

The tempting alternative fails because IPv4 packet reachability does not independently validate OSPFv3's IPv6 link-local neighbor exchanges. The supported action is to check IPv6 link-local addressing, OSPFv3 neighbor state and relevant ICMPv6 connectivity on the actual interface.

Incorrect Answers

A:

That prevention measure relates to an aggregation broadcast VLAN has a DR/BDR placement that conflicts with the approved design after a maintenance reboot.; it is not the unsafe shortcut described here.

C:

That prevention measure relates to two newly deployed distribution switches report identical OSPF router IDs, causing inconsistent LSAs in the area.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to a core node shows a missing route while remote LSDBs include the corresponding external LSA after a local policy change.; it is not the unsafe shortcut described here.

Question 374

A Junos enterprise team investigates this incident: A PIM sparse-mode segment cannot maintain neighbor state because PIM is configured on the wrong routed interface. Which technical explanation most directly identifies the cause or design principle?

  1. Source-specific multicast uses (S,G) membership semantics and generally avoids ASM rendezvous-point discovery for that flow.
  2. An RPF check is tied to the selected source path, so asymmetric arrival can invalidate otherwise reachable multicast traffic.
  3. Policy selectors must match the intended multicast group and source ranges so unrelated services are not blocked or leaked.
  4. PIM routing adjacencies require appropriate protocol participation on the actual routed interfaces used for the distribution tree.

Explanation

Correct Answer

D:

PIM routing adjacencies require appropriate protocol participation on the actual routed interfaces used for the distribution tree. The appropriate response is to enable PIM on the approved routed VLAN interface and inspect neighbor and join state.

Incorrect Answers

A:

“Source-specific multicast uses (S,G) membership semantics and generally avoids ASM rendezvous-point discovery for that flow” belongs to a separate IP Multicast issue: a video source is known and receivers support IGMPv3, but engineers configure ASM and an RP unnecessarily for the source-specific application. It does not explain the condition tested here.

B:

“An RPF check is tied to the selected source path, so asymmetric arrival can invalidate otherwise reachable multicast traffic” belongs to a separate IP Multicast issue: a redundant network changes the preferred route to the source while packets keep arriving on the other physical link. It does not explain the condition tested here.

C:

“Policy selectors must match the intended multicast group and source ranges so unrelated services are not blocked or leaked” belongs to a separate IP Multicast issue: an edge router uses a broad multicast filter that blocks valid collaboration groups alongside restricted lab streams. It does not explain the condition tested here.

Question 375

A Junos enterprise team investigates this incident: A campus multicast application migrates ASM clients to SSM but does not update the source-qualified membership requests. Which technical explanation most directly identifies the cause or design principle?

  1. Reverse Path Forwarding checks whether multicast packets arrive on the interface selected toward the source or tree root.
  2. ASM and SSM use different membership and source-selection semantics; an SSM receiver must identify its desired sender.
  3. PIM sparse-mode ASM builds shared-tree state toward a reachable RP, and an incorrect RP mapping can prevent service.
  4. Junos multicast RPF may use a dedicated routing table, so the effective RPF path must be inspected, not guessed from unicast traffic.

Explanation

Correct Answer

B:

ASM and SSM use different membership and source-selection semantics; an SSM receiver must identify its desired sender. The appropriate response is to update receiver memberships to use the approved source and group, and validate end-to-end (S,G) trees.

Incorrect Answers

A:

“Reverse Path Forwarding checks whether multicast packets arrive on the interface selected toward the source or tree root” belongs to a separate IP Multicast issue: multicast packets arrive on the wrong uplink after unicast routing changes and are dropped by the campus core. It does not explain the condition tested here.

C:

“PIM sparse-mode ASM builds shared-tree state toward a reachable RP, and an incorrect RP mapping can prevent service” belongs to a separate IP Multicast issue: a PIM sparse-mode receiver has an IGMP join but no multicast traffic because its upstream router cannot resolve the rendezvous point. It does not explain the condition tested here.

D:

“Junos multicast RPF may use a dedicated routing table, so the effective RPF path must be inspected, not guessed from unicast traffic” belongs to a separate IP Multicast issue: a campus uses a separate inet.2 multicast RPF table and investigators inspect only inet.0, overlooking a stale source route. It does not explain the condition tested here.

Question 376

For this case, select TWO complementary measures or outcome checks that directly resolve the problem: A Junos route is hidden by import policy, but the team troubleshoots only local physical interfaces.

  1. Assume the shortest AS path must win regardless of any LOCAL_PREF difference.
  2. Inspect hidden-route reason, incoming attributes and import-policy decisions, then correct the authorized match.
  3. Increase the route's MED while leaving BGP transport reachability and hop settings incorrect.
  4. Keep restarting the established BGP session without evaluating import-policy filtering.
  5. The desired received prefix is accepted and active while intentionally blocked prefixes stay rejected.

Explanation

Correct Answers

B:

Inspect hidden-route reason, incoming attributes and import-policy decisions, then correct the authorized match. This addresses the dependency that a BGP route rejected or hidden by import policy can be absent from active forwarding despite a healthy peer session.

E:

The desired received prefix is accepted and active while intentionally blocked prefixes stay rejected. The specific steps required are to inspect hidden-route reason, incoming attributes and import-policy decisions, then correct the authorized match.

Incorrect Answers

A:

“Assume the shortest AS path must win regardless of any LOCAL_PREF difference” is an unsafe response to a different problem: a router prefers a longer AS path when a higher LOCAL_PREF makes that route win, surprising the transit team. It is not a valid fix here.

C:

“Increase the route's MED while leaving BGP transport reachability and hop settings incorrect” is an unsafe response to a different problem: a transit peering is moved off directly connected interface IPs to loopbacks yet the TTL and reachability design are not updated. It is not a valid fix here.

D:

“Keep restarting the established BGP session without evaluating import-policy filtering” does not address a BGP route rejected or hidden by import policy can be absent from active forwarding despite a healthy peer session.

Question 377

A Junos enterprise team investigates this incident: A streaming application expects a source-specific group to accept traffic from any origin, contrary to its (S,G) subscription. Which technical explanation most directly identifies the cause or design principle?

  1. An RPF check is tied to the selected source path, so asymmetric arrival can invalidate otherwise reachable multicast traffic.
  2. ASM and SSM use different membership and source-selection semantics; an SSM receiver must identify its desired sender.
  3. MSDP is used in applicable ASM inter-RP designs to exchange active-source information between rendezvous points.
  4. PIM routing adjacencies require appropriate protocol participation on the actual routed interfaces used for the distribution tree.

Explanation

Correct Answer

B:

ASM and SSM use different membership and source-selection semantics; an SSM receiver must identify its desired sender. The appropriate response is to update receiver memberships to use the approved source and group, and validate end-to-end (S,G) trees.

Incorrect Answers

A:

“An RPF check is tied to the selected source path, so asymmetric arrival can invalidate otherwise reachable multicast traffic” belongs to a separate IP Multicast issue: a stream uses asymmetric unicast routing; multicast forwarding fails intermittently although individual host routes work. It does not explain the condition tested here.

C:

“MSDP is used in applicable ASM inter-RP designs to exchange active-source information between rendezvous points” belongs to a separate IP Multicast issue: a receiver domain requires discovery of sources known behind another RP, yet inter-RP source information exchange is absent. It does not explain the condition tested here.

D:

“PIM routing adjacencies require appropriate protocol participation on the actual routed interfaces used for the distribution tree” belongs to a separate IP Multicast issue: a new L3 VLAN permits unicast connectivity but the PIM Hello adjacency remains absent on the active path. It does not explain the condition tested here.

Question 378

To prevent recurrence of this precise networking failure, which practice should be adopted? A video source is known and receivers support IGMPv3, but engineers configure ASM and an RP unnecessarily for the source-specific application.

  1. Maintain consistent RP mappings and failover tests across multicast routers.
  2. Document ASM/SSM selection and receiver-version prerequisites before multicast deployment.
  3. Monitor IGMP membership churn and snooping state when moving clients between VLANs.
  4. Document whether multicast RPF uses inet.0 or inet.2 and verify after topology changes.

Explanation

Correct Answer

B:

Document ASM/SSM selection and receiver-version prerequisites before multicast deployment. This guards against source-specific multicast uses (S,G) membership semantics and generally avoids ASM rendezvous-point discovery for that flow.

Incorrect Answers

A:

“Maintain consistent RP mappings and failover tests across multicast routers” belongs to a separate IP Multicast issue: a PIM sparse-mode receiver has an IGMP join but no multicast traffic because its upstream router cannot resolve the rendezvous point. It does not explain the condition tested here.

C:

“Monitor IGMP membership churn and snooping state when moving clients between VLANs” belongs to a separate IP Multicast issue: a receiver port stops getting multicast because IGMP membership was not processed by the access switch after an interface move. It does not explain the condition tested here.

D:

“Document whether multicast RPF uses inet.0 or inet.2 and verify after topology changes” belongs to a separate IP Multicast issue: a campus uses a separate inet.2 multicast RPF table and investigators inspect only inet.0, overlooking a stale source route. It does not explain the condition tested here.

Question 379

To prevent recurrence of this precise networking failure, which practice should be adopted? Customer traffic emerges with the provider service tag still attached and is rejected by an endpoint expecting ordinary Ethernet.

  1. Include packet-capture verification of S-tag and C-tag transformation in provider handoffs.
  2. Test each critical VLAN's root bridge and forwarding path after VSTP updates.
  3. Audit edge classifications and apply appropriate BPDU protection on true client-facing ports.
  4. Track MSTP instance scale and maintain identical region parameters across participating switches.

Explanation

Correct Answer

A:

Include packet-capture verification of S-tag and C-tag transformation in provider handoffs. This guards against Q-in-Q requires deliberate tagging and untagging at service boundaries, with customer tags retained according to the handoff contract.

Incorrect Answers

B:

“Test each critical VLAN's root bridge and forwarding path after VSTP updates” belongs to a separate Ethernet Switching and Spanning Tree issue: a legacy interop design needs separate per-VLAN spanning-tree compatibility but all VLANs inherit one unsuitable tree. It does not explain the condition tested here.

C:

“Audit edge classifications and apply appropriate BPDU protection on true client-facing ports” belongs to a separate Ethernet Switching and Spanning Tree issue: a campus mistakenly enables edge behavior on a switch-to-switch trunk and a loop appears when a backup link activates. It does not explain the condition tested here.

D:

“Track MSTP instance scale and maintain identical region parameters across participating switches” belongs to a separate Ethernet Switching and Spanning Tree issue: a large campus places hundreds of VLANs in separate spanning-tree instances and reaches scale or CPU limits. It does not explain the condition tested here.

Question 380

The team believes it has resolved this Junos issue: A network replacement changes VSTP root elections, causing backup links to forward for a critical VLAN. Which observation best verifies the specific intended result?

  1. Two isolated tenant ports cannot reach each other but can reach the permitted gateway uplink.
  2. The VLAN registration propagates to the intended downstream trunk and reaches its member ports.
  3. Root and forwarding roles match the approved topology under normal and failover conditions.
  4. The customer control protocol reaches the far endpoint without altering the provider's own spanning-tree topology.

Explanation

Correct Answer

C:

Root and forwarding roles match the approved topology under normal and failover conditions. This checks the relevant result after compare bridge priority, VLAN or MSTI root and port path costs against design; adjust deliberately.

Incorrect Answers

A:

“Two isolated tenant ports cannot reach each other but can reach the permitted gateway uplink” belongs to a separate Ethernet Switching and Spanning Tree issue: a shared guest access VLAN allows two untrusted hotel-room ports to communicate directly, violating the isolation design. It does not explain the condition tested here.

B:

“The VLAN registration propagates to the intended downstream trunk and reaches its member ports” belongs to a separate Ethernet Switching and Spanning Tree issue: a new switch automatically discovers VLAN registrations on one trunk, but an intermediate trunk lacks MVRP participation and blocks the VLAN. It does not explain the condition tested here.

D:

“The customer control protocol reaches the far endpoint without altering the provider's own spanning-tree topology” belongs to a separate Ethernet Switching and Spanning Tree issue: a private L2 service must extend customer control protocols, yet the provider fabric consumes or drops the customer's BPDUs. It does not explain the condition tested here.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.