Juniper JN0-650 Exam Dumps, Practice Test Questions

100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Juniper JN0-650  Premium File
$54.99
$49.99

JN0-650 Premium File

  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

JN0-650 Premium File

Juniper JN0-650  Premium File
  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$54.99
$49.99

Juniper JN0-650 Practice Test 41

Question 400

The team believes it has resolved this Junos issue: Members of the same trusted workgroup are accidentally placed in isolated rather than community PVLAN ports and lose peer communication. Which observation best verifies the specific intended result?

  1. Two customers can use overlapping inner VLAN numbers without traffic mixing on the transport.
  2. Community members can communicate as intended while cross-community access remains blocked.
  3. The required VLAN groups follow their designated MSTI paths without per-VLAN instance explosion.
  4. The VLAN registration propagates to the intended downstream trunk and reaches its member ports.

Explanation

Correct Answer

B:

Community members can communicate as intended while cross-community access remains blocked. This checks the relevant result after map the trusted endpoints to the proper community secondary VLAN and keep other groups segregated.

Incorrect Answers

A:

“Two customers can use overlapping inner VLAN numbers without traffic mixing on the transport” belongs to a separate Ethernet Switching and Spanning Tree issue: a service provider must carry multiple customer VLAN IDs transparently over one metro Ethernet handoff. It does not explain the condition tested here.

C:

“The required VLAN groups follow their designated MSTI paths without per-VLAN instance explosion” belongs to a separate Ethernet Switching and Spanning Tree issue: a large campus places hundreds of VLANs in separate spanning-tree instances and reaches scale or CPU limits. It does not explain the condition tested here.

D:

“The VLAN registration propagates to the intended downstream trunk and reaches its member ports” belongs to a separate Ethernet Switching and Spanning Tree issue: a new switch automatically discovers VLAN registrations on one trunk, but an intermediate trunk lacks MVRP participation and blocks the VLAN. It does not explain the condition tested here.

Question 401

For this case, select TWO complementary measures or outcome checks that directly resolve the problem: Video gets dropped under congestion despite spare capacity because its queue has a too-small delay buffer.

  1. Trust arbitrary user DSCP markings as proof every packet belongs in the high-priority class.
  2. Use an egress shaper at the wrong interface as a substitute for every ingress traffic-contract check.
  3. Review queue buffer and scheduler allocations against traffic measurements and apply a bounded adjustment.
  4. Increase every queue buffer without considering latency, memory or scheduling priority.
  5. Queue depth, latency and drop statistics meet documented objectives during realistic traffic load.

Explanation

Correct Answers

C:

Review queue buffer and scheduler allocations against traffic measurements and apply a bounded adjustment. This addresses the dependency that queue schedulers and buffer parameters influence service rate and delay/drop behavior at congested egress.

E:

Queue depth, latency and drop statistics meet documented objectives during realistic traffic load. The specific steps required are to review queue buffer and scheduler allocations against traffic measurements and apply a bounded adjustment.

Incorrect Answers

A:

“Trust arbitrary user DSCP markings as proof every packet belongs in the high-priority class” is an unsafe response to a different problem: a security function needs to classify a subset of traffic by source and destination criteria rather than trusted external markings. It is not a valid fix here.

B:

“Use an egress shaper at the wrong interface as a substitute for every ingress traffic-contract check” is an unsafe response to a different problem: a guest network should be rate-limited at ingress, but engineers configure only an egress shaper on the uplink. It is not a valid fix here.

D:

“Increase every queue buffer without considering latency, memory or scheduling priority” does not address queue schedulers and buffer parameters influence service rate and delay/drop behavior at congested egress.

Question 402

A Junos enterprise team investigates this incident: A legacy interop design needs separate per-VLAN spanning-tree compatibility but all VLANs inherit one unsuitable tree. Which technical explanation most directly identifies the cause or design principle?

  1. Q-in-Q encapsulation can place a provider outer tag around customer VLAN tags to isolate transport context.
  2. VSTP provides per-VLAN spanning-tree behavior for compatibility and path control when the design and platform support it.
  3. Q-in-Q requires deliberate tagging and untagging at service boundaries, with customer tags retained according to the handoff contract.
  4. MVRP registrations can persist where membership state or participation has not been updated consistently.

Explanation

Correct Answer

B:

VSTP provides per-VLAN spanning-tree behavior for compatibility and path control when the design and platform support it. The appropriate response is to inspect VSTP VLAN membership, root priority and port roles, then repair the intended per-VLAN root arrangement.

Incorrect Answers

A:

“Q-in-Q encapsulation can place a provider outer tag around customer VLAN tags to isolate transport context” belongs to a separate Ethernet Switching and Spanning Tree issue: a service provider must carry multiple customer VLAN IDs transparently over one metro Ethernet handoff. It does not explain the condition tested here.

C:

“Q-in-Q requires deliberate tagging and untagging at service boundaries, with customer tags retained according to the handoff contract” belongs to a separate Ethernet Switching and Spanning Tree issue: customer traffic emerges with the provider service tag still attached and is rejected by an endpoint expecting ordinary Ethernet. It does not explain the condition tested here.

D:

“MVRP registrations can persist where membership state or participation has not been updated consistently” belongs to a separate Ethernet Switching and Spanning Tree issue: a campus migration removes a VLAN at the source while a trunk continues advertising it unexpectedly. It does not explain the condition tested here.

Question 403

Which suggested shortcut would be especially unsafe for this exact situation? Guest users on an EX switch see no captive login page because browser HTTP redirects are not being applied on the intended VLAN.

  1. Review MAC-device inventory, spoofing exposure and expiry before using MAC-based authorization.
  2. Document and test EAP timeout, explicit rejection and server-unavailable cases separately.
  3. Require inventory ownership and anomaly monitoring for MAC RADIUS exceptions.
  4. Add a static DNS record and assume it substitutes for captive-portal authentication and authorization.

Explanation

Correct Answer

D:

The tempting alternative fails because captive portal requires a supported browser interception and authentication-to-authorization sequence. The supported action is to inspect switch captive portal attachment, redirect reachability and completion flow for a test guest.

Incorrect Answers

A:

That prevention measure relates to an industrial sensor lacks a supplicant but needs restricted network authorization through a centralized identity service.; it is not the unsafe shortcut described here.

B:

That prevention measure relates to a switch assigns a misconfigured laptop with incorrect EAP credentials to a VLAN intended only for devices that never attempt 802.1X.; it is not the unsafe shortcut described here.

C:

That prevention measure relates to a MAC RADIUS device changes its network adapter and can no longer authenticate because its registered identifier is stale.; it is not the unsafe shortcut described here.

Question 404

For this case, select TWO complementary measures or outcome checks that directly resolve the problem: Two OSPF routers on a shared transit segment report different Hello and dead intervals and never establish adjacency.

  1. Change only BGP keepalive values and assume OSPF timers automatically follow.
  2. Increase every external metric blindly without checking which path should win.
  3. Restart the entire OSPFv2 process and assume this fixes a missing OSPFv3 loopback.
  4. Compare OSPF interface timers and align the two peers to approved Hello and dead values.
  5. Stable Hellos and Full neighbor state persist through repeated protocol interval checks.

Explanation

Correct Answers

D:

Compare OSPF interface timers and align the two peers to approved Hello and dead values. This addresses the dependency that OSPF neighbors require compatible Hello and dead interval settings on the shared interface.

E:

Stable Hellos and Full neighbor state persist through repeated protocol interval checks. The specific steps required are to compare OSPF interface timers and align the two peers to approved Hello and dead values.

Incorrect Answers

A:

“Change only BGP keepalive values and assume OSPF timers automatically follow” does not address OSPF neighbors require compatible Hello and dead interval settings on the shared interface.

B:

“Increase every external metric blindly without checking which path should win” is an unsafe response to a different problem: a branch receives two external paths with different metric-type assumptions after a policy change and prefers the wrong exit. It is not a valid fix here.

C:

“Restart the entire OSPFv2 process and assume this fixes a missing OSPFv3 loopback” is an unsafe response to a different problem: OSPFv3 peering comes up but the desired IPv6 loopback is not in the routing database after a rollout. It is not a valid fix here.

Question 405

Select THREE complementary corrective, verification, or preventive controls for this scenario: An Anycast RP design uses two RP addresses that do not share the intended anycast identity, producing inconsistent joins.

  1. A failure of one RP does not strand subscribers and remaining RPs maintain correct multicast source awareness.
  2. Assume inet.0 always controls PIM RPF even when an alternate multicast RPF table is configured.
  3. Verify anycast RP address and supported source synchronization method across the participating RP nodes.
  4. Use a unique group name as the only security boundary and rely on routers to infer its scope.
  5. Configure two unrelated RP mappings and assume their failover and source state stay identical automatically.
  6. Test RP failover and synchronization behavior before expanding Anycast RP.

Explanation

Correct Answers

A:

Confirmation: Verify anycast RP address and supported source synchronization method across the participating RP nodes.

C:

Correction: Anycast RP aims for a stable RP address with multiple nodes; consistent source discovery and RP coordination are essential to the chosen architecture.

F:

Prevention of recurrence: Anycast RP aims for a stable RP address with multiple nodes; consistent source discovery and RP coordination are essential to the chosen architecture.

Incorrect Answers

B:

“Assume inet.0 always controls PIM RPF even when an alternate multicast RPF table is configured” is an unsafe response to a different problem: a campus uses a separate inet.2 multicast RPF table and investigators inspect only inet.0, overlooking a stale source route. It is not a valid fix here.

D:

“Use a unique group name as the only security boundary and rely on routers to infer its scope” is an unsafe response to a different problem: a laboratory's multicast test group leaks to the corporate backbone despite a requirement to keep it within the lab. It is not a valid fix here.

E:

“Configure two unrelated RP mappings and assume their failover and source state stay identical automatically” does not address anycast RP aims for a stable RP address with multiple nodes; consistent source discovery and RP coordination are essential to the chosen architecture.

Question 406

The team believes it has resolved this Junos issue: A credential-rejected user is sent to the guest VLAN even though the planned design reserves guest VLAN for silent non-supplicants. Which observation best verifies the specific intended result?

  1. The known device reaches only permitted destinations and cannot reach employee or management resources.
  2. A nonresponding guest gets its intended limited VLAN while invalid credentials never receive guest privilege.
  3. The registered device is authorized with limited access; an unknown MAC remains blocked.
  4. Only the inventoried device has the expected limited connectivity; rogue or unknown hardware is denied.

Explanation

Correct Answer

B:

A nonresponding guest gets its intended limited VLAN while invalid credentials never receive guest privilege. This checks the relevant result after check authentication result classification and map the rejected user to an appropriate deny or reject response.

Incorrect Answers

A:

“The known device reaches only permitted destinations and cannot reach employee or management resources” belongs to a separate Layer 2 Authentication and Access Control issue: a MAC RADIUS policy authenticates a known camera but applies the broad employee VLAN instead of a camera-only network. It does not explain the condition tested here.

C:

“The registered device is authorized with limited access; an unknown MAC remains blocked” belongs to a separate Layer 2 Authentication and Access Control issue: an industrial sensor lacks a supplicant but needs restricted network authorization through a centralized identity service. It does not explain the condition tested here.

D:

“Only the inventoried device has the expected limited connectivity; rogue or unknown hardware is denied” belongs to a separate Layer 2 Authentication and Access Control issue: a MAC RADIUS device changes its network adapter and can no longer authenticate because its registered identifier is stale. It does not explain the condition tested here.

Question 407

To prevent recurrence of this precise networking failure, which practice should be adopted? A branch uplink uses area 0.0.0.6 on one router and area 0.0.0.9 on its peer after a template copy.

  1. Validate per-interface OSPF area assignments from an approved topology matrix before commit.
  2. Test one allowed and one forbidden route against each export policy term before deployment.
  3. Include a checklist of advertised IPv6 service and loopback addresses in OSPFv3 acceptance.
  4. Use named prefix lists and regression tests for approved and denied redistribution cases.

Explanation

Correct Answer

A:

Validate per-interface OSPF area assignments from an approved topology matrix before commit. This guards against OSPF neighbors must agree on the area context to form adjacency on the common link.

Incorrect Answers

B:

“Test one allowed and one forbidden route against each export policy term before deployment” belongs to a separate Interior Gateway Protocols (IGPs) issue: an OSPF export term filters routes based on the wrong protocol, so an intended static default is not originated. It does not explain the condition tested here.

C:

“Include a checklist of advertised IPv6 service and loopback addresses in OSPFv3 acceptance” belongs to a separate Interior Gateway Protocols (IGPs) issue: a replacement router has IPv6 OSPFv3 adjacency yet does not advertise the loopback subnet required for monitoring. It does not explain the condition tested here.

D:

“Use named prefix lists and regression tests for approved and denied redistribution cases” belongs to a separate Interior Gateway Protocols (IGPs) issue: a redistribution policy injects every static route into OSPF, including a maintenance-only prefix that should stay local. It does not explain the condition tested here.

Question 408

Which suggested shortcut would be especially unsafe for this exact situation? A Junos route is hidden by import policy, but the team troubleshoots only local physical interfaces.

  1. Include inet6-specific next-hop verification in dual-stack BGP peer checklists.
  2. Include next-hop reachability tests in iBGP and route-reflector deployment acceptance.
  3. Keep restarting the established BGP session without evaluating import-policy filtering.
  4. Review policy ordering with negative tests and explicit default actions on every change.

Explanation

Correct Answer

C:

The tempting alternative fails because a BGP route rejected or hidden by import policy can be absent from active forwarding despite a healthy peer session. The supported action is to inspect hidden-route reason, incoming attributes and import-policy decisions, then correct the authorized match.

Incorrect Answers

A:

That prevention measure relates to an IPv6 transit prefix is hidden because its next-hop address is absent from the correct IPv6 routing table.; it is not the unsafe shortcut described here.

B:

That prevention measure relates to a new IPv4 BGP prefix has a valid AS path but cannot become active after the IGP stops carrying its next-hop address.; it is not the unsafe shortcut described here.

D:

That prevention measure relates to a route with a permissive policy term is accepted before a later deny term can block it.; it is not the unsafe shortcut described here.

Question 409

The team believes it has resolved this Junos issue: Voice packets arrive with DSCP EF but are placed into the best-effort queue after a new access interface template is applied. Which observation best verifies the specific intended result?

  1. Packet captures show the intended DSCP or 802.1p fields on outbound voice, video and data traffic.
  2. Observed queue counters show voice packets in the designated forwarding class after classification.
  3. Only approved media streams leave with high-priority code points; backup traffic uses its designated mark.
  4. Voice traffic receives the required scheduled service at the congested egress without starving other classes.

Explanation

Correct Answer

B:

Observed queue counters show voice packets in the designated forwarding class after classification. This checks the relevant result after apply an approved behavior-aggregate classifier with the intended DSCP-to-class mapping on the real ingress interface.

Incorrect Answers

A:

“Packet captures show the intended DSCP or 802.1p fields on outbound voice, video and data traffic” belongs to a separate Class of Service (CoS) issue: a boundary router classifies EF voice traffic correctly but sends outbound DSCP zero, so downstream devices undo priority handling. It does not explain the condition tested here.

C:

“Only approved media streams leave with high-priority code points; backup traffic uses its designated mark” belongs to a separate Class of Service (CoS) issue: a branch egress rewriter incorrectly gives bulk backups the same DSCP as real-time voice. It does not explain the condition tested here.

D:

“Voice traffic receives the required scheduled service at the congested egress without starving other classes” belongs to a separate Class of Service (CoS) issue: a low-latency queue is correctly classified but voice delays because its egress scheduler map is absent from the trunk. It does not explain the condition tested here.

Question 410

The team believes it has resolved this Junos issue: A newly deployed IP phone joins the data network because the switch does not advertise the intended voice VLAN through LLDP-MED. Which observation best verifies the specific intended result?

  1. The phone receives voice service on its tagged VLAN and the PC remains on its separate data VLAN.
  2. Tagged voice packets retain the intended service class through the access and aggregation paths.
  3. The handset learns the authorized voice VLAN and traffic is tagged and prioritized according to design.
  4. The device stays powered during peak consumption and Junos reports no power-denial events.

Explanation

Correct Answer

C:

The handset learns the authorized voice VLAN and traffic is tagged and prioritized according to design. This checks the relevant result after enable supported LLDP-MED network policy on the phone-facing port and verify advertisements and phone settings.

Incorrect Answers

A:

“The phone receives voice service on its tagged VLAN and the PC remains on its separate data VLAN” belongs to a separate IP Telephony Features issue: a desk phone sends tagged voice traffic, but the switchport permits only the untagged data VLAN. It does not explain the condition tested here.

B:

“Tagged voice packets retain the intended service class through the access and aggregation paths” belongs to a separate IP Telephony Features issue: a handset follows LLDP-MED voice VLAN advertisement but sends SIP media with the wrong priority marking for the campus QoS design. It does not explain the condition tested here.

D:

“The device stays powered during peak consumption and Junos reports no power-denial events” belongs to a separate IP Telephony Features issue: a phone's LLDP-negotiated power demand exceeds its access port's allocated PoE limit and it repeatedly restarts. It does not explain the condition tested here.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.