Juniper JN0-650 Exam Dumps, Practice Test Questions

100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!

Juniper JN0-650  Premium File
$54.99
$49.99

JN0-650 Premium File

  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates

JN0-650 Premium File

Juniper JN0-650  Premium File
  • Premium File: 107 Questions & Answers. Last update: Nov 7, 2026
  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
$54.99
$49.99

Juniper JN0-650 Practice Test 44

Question 430

For this case, select TWO complementary measures or outcome checks that directly resolve the problem: A switch receives successful RADIUS Access-Accept but the user still lands in an unexpected VLAN because the dynamic assignment is not supported on that platform.

  1. Give MAC-authenticated devices the same unrestricted access as strongly authenticated employees.
  2. Check returned RADIUS attributes and supported platform software, then enforce a valid authorization assignment.
  3. Assume any RADIUS Access-Accept forces a requested dynamic VLAN on every Junos switch variant.
  4. The switch reports an authorized session with the intended VLAN and access policy.
  5. Add a static DNS record and assume it substitutes for captive-portal authentication and authorization.

Explanation

Correct Answers

B:

Check returned RADIUS attributes and supported platform software, then enforce a valid authorization assignment. This addresses the dependency that authentication success and postauthentication VLAN/policy assignment are separate stages whose feature support may vary.

D:

The switch reports an authorized session with the intended VLAN and access policy. The specific steps required are to check returned RADIUS attributes and supported platform software, then enforce a valid authorization assignment.

Incorrect Answers

A:

“Give MAC-authenticated devices the same unrestricted access as strongly authenticated employees” is an unsafe response to a different problem: a legacy printer can join after MAC authentication yet is allowed to reach sensitive management segments. It is not a valid fix here.

C:

“Assume any RADIUS Access-Accept forces a requested dynamic VLAN on every Junos switch variant” does not address authentication success and postauthentication VLAN/policy assignment are separate stages whose feature support may vary.

E:

“Add a static DNS record and assume it substitutes for captive-portal authentication and authorization” is an unsafe response to a different problem: a visitor portal redirects browser traffic but never releases the user to the approved network after authentication. It is not a valid fix here.

Question 431

To prevent recurrence of this precise networking failure, which practice should be adopted? An OSPFv3 adjacency on a dual-stack campus changes state because engineers treat IPv4 interface reachability as proof of IPv6 control-plane health.

  1. Record both LSDB presence and local RIB installation in OSPF troubleshooting runbooks.
  2. Test one allowed and one forbidden route against each export policy term before deployment.
  3. Keep IPv4 and IPv6 routing verification separate for dual-stack maintenance.
  4. Make physical and logical MTU parity part of transit-link commissioning and review.

Explanation

Correct Answer

C:

Keep IPv4 and IPv6 routing verification separate for dual-stack maintenance. This guards against IPv4 packet reachability does not independently validate OSPFv3's IPv6 link-local neighbor exchanges.

Incorrect Answers

A:

“Record both LSDB presence and local RIB installation in OSPF troubleshooting runbooks” belongs to a separate Interior Gateway Protocols (IGPs) issue: a core node shows a missing route while remote LSDBs include the corresponding external LSA after a local policy change. It does not explain the condition tested here.

B:

“Test one allowed and one forbidden route against each export policy term before deployment” belongs to a separate Interior Gateway Protocols (IGPs) issue: a branch default-route injection stops after a policy matches OSPF-learned routes instead of the intended local static. It does not explain the condition tested here.

D:

“Make physical and logical MTU parity part of transit-link commissioning and review” belongs to a separate Interior Gateway Protocols (IGPs) issue: a core-router replacement leaves an OSPF adjacency stuck exchanging database descriptions, while the two ends have different Layer 3 MTUs. It does not explain the condition tested here.

Question 432

A Junos enterprise team investigates this incident: A trading-data sender needs to serve many local subscribers, but each listener receives its own redundant copy over the backbone. Which technical explanation most directly identifies the cause or design principle?

  1. IP multicast replicates streams at forwarding branches instead of requiring a separate source-to-receiver unicast stream.
  2. Anycast RP aims for a stable RP address with multiple nodes; consistent source discovery and RP coordination are essential to the chosen architecture.
  3. PIM routing adjacencies require appropriate protocol participation on the actual routed interfaces used for the distribution tree.
  4. PIM sparse-mode ASM builds shared-tree state toward a reachable RP, and an incorrect RP mapping can prevent service.

Explanation

Correct Answer

A:

IP multicast replicates streams at forwarding branches instead of requiring a separate source-to-receiver unicast stream. The appropriate response is to design a multicast distribution tree with explicit receiver memberships and test only the subscribed delivery paths.

Incorrect Answers

B:

“Anycast RP aims for a stable RP address with multiple nodes; consistent source discovery and RP coordination are essential to the chosen architecture” belongs to a separate IP Multicast issue: a second campus RP is deployed for availability but source-awareness synchronization is omitted where the design requires it. It does not explain the condition tested here.

C:

“PIM routing adjacencies require appropriate protocol participation on the actual routed interfaces used for the distribution tree” belongs to a separate IP Multicast issue: a PIM sparse-mode segment cannot maintain neighbor state because PIM is configured on the wrong routed interface. It does not explain the condition tested here.

D:

“PIM sparse-mode ASM builds shared-tree state toward a reachable RP, and an incorrect RP mapping can prevent service” belongs to a separate IP Multicast issue: a PIM sparse-mode receiver has an IGMP join but no multicast traffic because its upstream router cannot resolve the rendezvous point. It does not explain the condition tested here.

Question 433

The team believes it has resolved this Junos issue: A transit peering is moved off directly connected interface IPs to loopbacks yet the TTL and reachability design are not updated. Which observation best verifies the specific intended result?

  1. The unauthorized route is rejected while intended export cases still match the proper terms.
  2. A loopback-to-loopback BGP session becomes Established and exchanges only permitted NLRI.
  3. The IPv6 BGP route becomes eligible and forwards over an IPv6-resolvable next hop.
  4. The chosen best path follows the documented attribute ordering rather than a single observed MED value.

Explanation

Correct Answer

B:

A loopback-to-loopback BGP session becomes Established and exchanges only permitted NLRI. This checks the relevant result after verify endpoint reachability and configure appropriate multihop session parameters and security controls.

Incorrect Answers

A:

“The unauthorized route is rejected while intended export cases still match the proper terms” belongs to a separate Border Gateway Protocol (BGP) issue: a route with a permissive policy term is accepted before a later deny term can block it. It does not explain the condition tested here.

C:

“The IPv6 BGP route becomes eligible and forwards over an IPv6-resolvable next hop” belongs to a separate Border Gateway Protocol (BGP) issue: an IPv6 transit prefix is hidden because its next-hop address is absent from the correct IPv6 routing table. It does not explain the condition tested here.

D:

“The chosen best path follows the documented attribute ordering rather than a single observed MED value” belongs to a separate Border Gateway Protocol (BGP) issue: two equal LOCAL_PREF and AS-path candidates remain tied until MED influences the choice under the applicable comparison rules. It does not explain the condition tested here.

Question 434

A network change is required for the following specific situation: Video gets dropped under congestion despite spare capacity because its queue has a too-small delay buffer. Which corrective action is most appropriate?

  1. Review the forwarding class and queue map for control and data traffic and apply the intended assignments.
  2. Use a permitted firewall or multifield classifier matching the approved traffic fields and assign its forwarding class.
  3. Review queue buffer and scheduler allocations against traffic measurements and apply a bounded adjustment.
  4. Map the two packet categories to the intended PLP levels and verify drop-profile response.

Explanation

Correct Answer

C:

Queue schedulers and buffer parameters influence service rate and delay/drop behavior at congested egress. Verify this by checking that queue depth, latency and drop statistics meet documented objectives during realistic traffic load.

Incorrect Answers

A:

“Review the forwarding class and queue map for control and data traffic and apply the intended assignments” belongs to a separate Class of Service (CoS) issue: a forwarding-class configuration sends critical routing packets to a queue used for bulk backups and adjacency stability degrades under load. It does not explain the condition tested here.

B:

“Use a permitted firewall or multifield classifier matching the approved traffic fields and assign its forwarding class” belongs to a separate Class of Service (CoS) issue: an application needs priority regardless of incoming DSCP, but an interface uses only a header-based classifier. It does not explain the condition tested here.

D:

“Map the two packet categories to the intended PLP levels and verify drop-profile response” belongs to a separate Class of Service (CoS) issue: a business wants out-of-profile marked traffic to drop earlier than in-profile traffic within one forwarding class. It does not explain the condition tested here.

Question 435

Select THREE complementary corrective, verification, or preventive controls for this scenario: An aggregation network sees customer VLAN IDs collide because several tenants share the same single-tagged provider infrastructure.

  1. Assume setting one global RSTP root automatically produces independently chosen roots for every VSTP VLAN.
  2. Two customers can use overlapping inner VLAN numbers without traffic mixing on the transport.
  3. Design supported stacked VLAN tagging and verify S-tag/C-tag placement at the correct ingress and egress.
  4. Document outer/inner VLAN roles and test tag stripping and preservation at service boundaries.
  5. Remove customer inner VLAN tags at entry and assume overlapping customer IDs remain isolated.
  6. Make every switch-to-switch uplink an edge port to accelerate convergence.

Explanation

Correct Answers

B:

Confirmation: Design supported stacked VLAN tagging and verify S-tag/C-tag placement at the correct ingress and egress.

C:

Correction: Q-in-Q encapsulation can place a provider outer tag around customer VLAN tags to isolate transport context.

D:

Prevention of recurrence: Q-in-Q encapsulation can place a provider outer tag around customer VLAN tags to isolate transport context.

Incorrect Answers

A:

“Assume setting one global RSTP root automatically produces independently chosen roots for every VSTP VLAN” is an unsafe response to a different problem: a VSTP network intended to send voice and data VLANs over different active paths instead blocks both on the same uplink. It is not a valid fix here.

E:

“Remove customer inner VLAN tags at entry and assume overlapping customer IDs remain isolated” does not address Q-in-Q encapsulation can place a provider outer tag around customer VLAN tags to isolate transport context.

F:

“Make every switch-to-switch uplink an edge port to accelerate convergence” is an unsafe response to a different problem: a campus mistakenly enables edge behavior on a switch-to-switch trunk and a loop appears when a backup link activates. It is not a valid fix here.

Question 436

A Junos enterprise team investigates this incident: A switch logs EAP timeout while the endpoint has no 802.1X supplicant, yet the operator rotates valid RADIUS passwords repeatedly. Which technical explanation most directly identifies the cause or design principle?

  1. Supplicant absence is a distinct failure from an invalid credential or unreachable authentication server.
  2. MAC RADIUS provides a fallback identity mechanism for suitable non-802.1X devices, with weaker assurance than certificate-based 802.1X.
  3. MAC-based identity is tied to the observed hardware address and can be spoofed; it is not strong user authentication.
  4. Captive portal requires a supported browser interception and authentication-to-authorization sequence.

Explanation

Correct Answer

A:

Supplicant absence is a distinct failure from an invalid credential or unreachable authentication server. The appropriate response is to inspect packet exchange and classify the endpoint before selecting a supported fallback method.

Incorrect Answers

B:

“MAC RADIUS provides a fallback identity mechanism for suitable non-802.1X devices, with weaker assurance than certificate-based 802.1X” belongs to a separate Layer 2 Authentication and Access Control issue: an industrial sensor lacks a supplicant but needs restricted network authorization through a centralized identity service. It does not explain the condition tested here.

C:

“MAC-based identity is tied to the observed hardware address and can be spoofed; it is not strong user authentication” belongs to a separate Layer 2 Authentication and Access Control issue: a MAC RADIUS device changes its network adapter and can no longer authenticate because its registered identifier is stale. It does not explain the condition tested here.

D:

“Captive portal requires a supported browser interception and authentication-to-authorization sequence” belongs to a separate Layer 2 Authentication and Access Control issue: guest users on an EX switch see no captive login page because browser HTTP redirects are not being applied on the intended VLAN. It does not explain the condition tested here.

Question 437

A network change is required for the following specific situation: A router's OSPF neighbor restarts repeatedly because duplicate router IDs were assigned to different routing nodes. Which corrective action is most appropriate?

  1. Inspect the active local default and export term conditions; match only the authorized static default source.
  2. Review external metric type and value at the originator, then apply the documented traffic-engineering policy.
  3. Assign unique stable router IDs, confirm interfaces, and recheck adjacency and LSDB after controlled reconvergence.
  4. Inspect IPv6 interface addresses and OSPFv3 interface participation, then add the intended loopback advertisement within policy.

Explanation

Correct Answer

C:

OSPF identifies routers by unique router ID; collisions can destabilize LSDB and adjacency behavior. Verify this by checking that no router-ID collision appears and OSPF paths stabilize with expected next hops.

Incorrect Answers

A:

“Inspect the active local default and export term conditions; match only the authorized static default source” belongs to a separate Interior Gateway Protocols (IGPs) issue: a branch default-route injection stops after a policy matches OSPF-learned routes instead of the intended local static. It does not explain the condition tested here.

B:

“Review external metric type and value at the originator, then apply the documented traffic-engineering policy” belongs to a separate Interior Gateway Protocols (IGPs) issue: an OSPF policy update redistributes a route without an appropriate external metric, shifting traffic to a slow backup. It does not explain the condition tested here.

D:

“Inspect IPv6 interface addresses and OSPFv3 interface participation, then add the intended loopback advertisement within policy” belongs to a separate Interior Gateway Protocols (IGPs) issue: OSPFv3 peering comes up but the desired IPv6 loopback is not in the routing database after a rollout. It does not explain the condition tested here.

Question 438

A Junos enterprise team investigates this incident: A bridge domain has valid unicast Type 2 entries yet remote VTEPs do not discover a new participating segment for BUM forwarding. Which technical explanation most directly identifies the cause or design principle?

  1. EVPN Ethernet segment identifiers associate redundant attachments with one multihoming segment and support coordinated convergence.
  2. EVPN Type 3 inclusive multicast routes announce interested VTEPs for a broadcast domain's BUM replication set.
  3. VNI and bridge-domain mapping determines tenant overlay segmentation; misaligned mappings can misdeliver or isolate traffic.
  4. VXLAN adds encapsulation overhead, so underlay MTU must accommodate the intended overlay frame size.

Explanation

Correct Answer

B:

EVPN Type 3 inclusive multicast routes announce interested VTEPs for a broadcast domain's BUM replication set. The appropriate response is to inspect Type 3 routes and VNI import/export membership; repair the intended inclusive-multicast advertisement.

Incorrect Answers

A:

“EVPN Ethernet segment identifiers associate redundant attachments with one multihoming segment and support coordinated convergence” belongs to a separate EVPN issue: a shared Ethernet segment loses its fast convergence properties after an ESI-LAG peer receives an inconsistent configuration. It does not explain the condition tested here.

C:

“VNI and bridge-domain mapping determines tenant overlay segmentation; misaligned mappings can misdeliver or isolate traffic” belongs to a separate EVPN issue: a campus extension carries the right VXLAN outer header but directs frames to the wrong tenant bridge domain due to bad VNI mapping. It does not explain the condition tested here.

D:

“VXLAN adds encapsulation overhead, so underlay MTU must accommodate the intended overlay frame size” belongs to a separate EVPN issue: an EVPN-VXLAN frame is dropped over a path where the IP underlay MTU was sized only for unencapsulated Ethernet payloads. It does not explain the condition tested here.

Question 439

A network change is required for the following specific situation: An ingress classification filter for one terminal type inadvertently redirects other hosts using the same uplink. Which corrective action is most appropriate?

  1. Create an approved MSTP region and VLAN-to-instance mapping, then verify root and port role behavior.
  2. Design supported stacked VLAN tagging and verify S-tag/C-tag placement at the correct ingress and egress.
  3. Narrow the match to approved selectors and compare affected packet counters and VLAN assignment.
  4. Compare complete region configuration on the peers and restore the approved shared MSTP region values.

Explanation

Correct Answer

C:

Overbroad match conditions can cause unauthorized VLAN steering and affect both security and reachability. Verify this by checking that only the intended endpoint class is moved while nonmatching hosts retain correct access.

Incorrect Answers

A:

“Create an approved MSTP region and VLAN-to-instance mapping, then verify root and port role behavior” belongs to a separate Ethernet Switching and Spanning Tree issue: a large campus places hundreds of VLANs in separate spanning-tree instances and reaches scale or CPU limits. It does not explain the condition tested here.

B:

“Design supported stacked VLAN tagging and verify S-tag/C-tag placement at the correct ingress and egress” belongs to a separate Ethernet Switching and Spanning Tree issue: an aggregation network sees customer VLAN IDs collide because several tenants share the same single-tagged provider infrastructure. It does not explain the condition tested here.

D:

“Compare complete region configuration on the peers and restore the approved shared MSTP region values” belongs to a separate Ethernet Switching and Spanning Tree issue: an uplink becomes a region boundary unexpectedly after an administrator changes an MSTP configuration name on only one switch. It does not explain the condition tested here.

Question 440

Which suggested shortcut would be especially unsafe for this exact situation? A RED drop profile is applied too aggressively and drops packets even under moderate load.

  1. Audit DSCP preservation and remarking at untrusted edge boundaries.
  2. Document trusted-marking boundaries and test both matched and unmatched multifield traffic.
  3. Test both average-rate enforcement and microburst tolerance for new policer profiles.
  4. Set the maximum drop probability at near-empty queue levels and expect no early loss.

Explanation

Correct Answer

D:

The tempting alternative fails because drop profiles and weighted random early detection influence probabilistic discard thresholds as queue fill rises. The supported action is to review configured drop probability versus fill level and align the profile with acceptable congestion targets.

Incorrect Answers

A:

That prevention measure relates to a branch egress rewriter incorrectly gives bulk backups the same DSCP as real-time voice.; it is not the unsafe shortcut described here.

B:

That prevention measure relates to an application needs priority regardless of incoming DSCP, but an interface uses only a header-based classifier.; it is not the unsafe shortcut described here.

C:

That prevention measure relates to a traffic policer drops small microbursts despite an acceptable average rate because its configured burst size is too tight.; it is not the unsafe shortcut described here.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests

UP

SPECIAL OFFER: GET 10% OFF

This is ONE TIME OFFER

ExamSnap Discount Offer
Enter Your Email Address to Receive Your 10% Off Discount Code

A confirmation link will be sent to this email address to verify your login. *We value your privacy. We will not rent or sell your email address.

Download Free Demo of VCE Exam Simulator

Experience Avanset VCE Exam Simulator for yourself.

Simply submit your e-mail address below to get started with our interactive software demo of your free trial.

Free Demo Limits: In the demo version you will be able to access only first 5 questions from exam.