100% Latest & Updated Juniper JN0-650 Practice Test Questions, Exam Dumps & Verified Answers!
30 Days Free Updates, Instant Download!
Question 40
Which suggested shortcut would be especially unsafe for this exact situation? A multihomed CE is attached to two leafs but one leaf advertises a different ESI, preventing expected redundancy behavior.
- Use two unrelated ESIs for one logical Ethernet segment and assume EVPN coordinates them as one.
- Validate EVPN Type 2 and Type 3 propagation separately in new VNI bring-up tests.
- Keep route-type purpose and acceptance checks in EVPN troubleshooting runbooks.
- Track route import, MAC mobility and aging during host migration tests.
Explanation
Correct Answer
A:The tempting alternative fails because EVPN Ethernet segment identifiers associate redundant attachments with one multihoming segment and support coordinated convergence. The supported action is to align the intended ESI and supported LAG mode, then inspect relevant EVPN Type 1 and Type 4 routes.
Incorrect Answers
B:That prevention measure relates to a bridge domain has valid unicast Type 2 entries yet remote VTEPs do not discover a new participating segment for BUM forwarding.; it is not the unsafe shortcut described here.
C:That prevention measure relates to a troubleshooting team expects EVPN Ethernet auto-discovery route Type 1 to carry all host MAC/IP bindings.; it is not the unsafe shortcut described here.
D:That prevention measure relates to a host moves between leafs and the destination leaf still forwards toward the previous MAC location.; it is not the unsafe shortcut described here.
Question 41
A network change is required for the following specific situation: A voice VLAN is configured correctly yet the switch's trust and rewrite policy fails to preserve the required phone traffic classification. Which corrective action is most appropriate?
- Verify ingress voice classification, LLDP-MED policy and egress rewrite treatment for voice media.
- Update the approved location mapping and confirm transmitted LLDP-MED location information on the affected port.
- Set supported higher PoE priority for critical voice endpoints and validate the failure budget.
- Check switch PoE budget, negotiated device requirements and per-port allocation, then rebalance or provision supported power.
Explanation
Correct Answer
A:Voice VLAN placement and CoS marking are related but separate; correct VLAN tagging does not guarantee priority handling. Verify this by checking that tagged voice packets retain the intended service class through the access and aggregation paths.
Incorrect Answers
B:“Update the approved location mapping and confirm transmitted LLDP-MED location information on the affected port” belongs to a separate IP Telephony Features issue: a campus changes a telephone port but LLDP-MED location data remains mapped to an old floor. It does not explain the condition tested here.
C:“Set supported higher PoE priority for critical voice endpoints and validate the failure budget” belongs to a separate IP Telephony Features issue: a switch assigns equal PoE power priority to every port and disconnects an emergency phone before low-priority signage during a power shortage. It does not explain the condition tested here.
D:“Check switch PoE budget, negotiated device requirements and per-port allocation, then rebalance or provision supported power” belongs to a separate IP Telephony Features issue: a high-power phone intermittently reboots whenever all powered endpoints on a switch chassis start simultaneously. It does not explain the condition tested here.
Question 42
The team believes it has resolved this Junos issue: A MAC RADIUS device changes its network adapter and can no longer authenticate because its registered identifier is stale. Which observation best verifies the specific intended result?
- During a simulated RADIUS outage, endpoints receive only the approved degraded-connectivity policy.
- The scanner authenticates through the approved method without any browser step, while unknown devices stay denied.
- Only the inventoried device has the expected limited connectivity; rogue or unknown hardware is denied.
- Authenticated corporate devices use strong EAP policies while designated legacy endpoints use restricted fallback.
Explanation
Correct Answer
C:Only the inventoried device has the expected limited connectivity; rogue or unknown hardware is denied. This checks the relevant result after confirm the actual device and approved MAC record, then restrict the resulting authorization and add compensating controls.
Incorrect Answers
A:“During a simulated RADIUS outage, endpoints receive only the approved degraded-connectivity policy” belongs to a separate Layer 2 Authentication and Access Control issue: after a RADIUS outage, the access switch opens ports broadly instead of applying the approved restricted server-fail VLAN. It does not explain the condition tested here.
B:“The scanner authenticates through the approved method without any browser step, while unknown devices stay denied” belongs to a separate Layer 2 Authentication and Access Control issue: a noninteractive sensor is trapped in captive-portal onboarding because operators selected browser authentication for all endpoints. It does not explain the condition tested here.
D:“Authenticated corporate devices use strong EAP policies while designated legacy endpoints use restricted fallback” belongs to a separate Layer 2 Authentication and Access Control issue: two authentication methods are enabled on a shared switch port but fallback ordering bypasses a successful 802.1X result. It does not explain the condition tested here.
Question 43
A Junos enterprise team investigates this incident: A network uses one VLAN-wide topology but wants two forwarding trees for different groups without an instance for every VLAN. Which technical explanation most directly identifies the cause or design principle?
- MSTP maps VLANs into a smaller set of spanning-tree instances, providing scalable per-group path control.
- MVRP registrations can persist where membership state or participation has not been updated consistently.
- Q-in-Q encapsulation can place a provider outer tag around customer VLAN tags to isolate transport context.
- Overbroad match conditions can cause unauthorized VLAN steering and affect both security and reachability.
Explanation
Correct Answer
A:MSTP maps VLANs into a smaller set of spanning-tree instances, providing scalable per-group path control. The appropriate response is to create an approved MSTP region and VLAN-to-instance mapping, then verify root and port role behavior.
Incorrect Answers
B:“MVRP registrations can persist where membership state or participation has not been updated consistently” belongs to a separate Ethernet Switching and Spanning Tree issue: a campus migration removes a VLAN at the source while a trunk continues advertising it unexpectedly. It does not explain the condition tested here.
C:“Q-in-Q encapsulation can place a provider outer tag around customer VLAN tags to isolate transport context” belongs to a separate Ethernet Switching and Spanning Tree issue: an aggregation network sees customer VLAN IDs collide because several tenants share the same single-tagged provider infrastructure. It does not explain the condition tested here.
D:“Overbroad match conditions can cause unauthorized VLAN steering and affect both security and reachability” belongs to a separate Ethernet Switching and Spanning Tree issue: a filter-based VLAN security design uses a rule that catches too many packets and steers legitimate devices into quarantine. It does not explain the condition tested here.
Question 44
Which suggested shortcut would be especially unsafe for this exact situation? A network marks a customer route with a community but an export policy ignores the community, leaking the route to another peer.
- Review fall-through behavior with traceable policy test cases before changes reach production.
- Assume attaching a BGP community automatically prevents all external redistribution without policy.
- Test expected best-path behavior before modifying LOCAL_PREF across internal peers.
- Validate all required BGP address families during dual-stack peer commissioning.
Explanation
Correct Answer
B:The tempting alternative fails because communities are policy metadata; tagging does not enforce advertisement restrictions unless a matching policy acts on it. The supported action is to inspect received communities and export policy terms, then attach a tested community match and reject rule.
Incorrect Answers
A:That prevention measure relates to a route policy lacks an explicit intended default action, and unmatched BGP prefixes behave differently than planned.; it is not the unsafe shortcut described here.
C:That prevention measure relates to an enterprise chooses a different BGP exit after import policy assigns a higher local preference to the backup path.; it is not the unsafe shortcut described here.
D:That prevention measure relates to BGP peers exchange IPv4 NLRI correctly but a planned IPv6 customer route never appears in inet6.0.; it is not the unsafe shortcut described here.
Question 45
The team believes it has resolved this Junos issue: A remote prefix appears in incoming BGP updates yet never becomes active after a new route policy was applied. Which observation best verifies the specific intended result?
- A loopback-to-loopback BGP session becomes Established and exchanges only permitted NLRI.
- Route detail shows a reachable next hop and end-to-end forwarding through the intended border router.
- A controlled route is withheld from prohibited peers while approved routes retain their expected advertisements.
- The desired received prefix is accepted and active while intentionally blocked prefixes stay rejected.
Explanation
Correct Answer
D:The desired received prefix is accepted and active while intentionally blocked prefixes stay rejected. This checks the relevant result after inspect hidden-route reason, incoming attributes and import-policy decisions, then correct the authorized match.
Incorrect Answers
A:“A loopback-to-loopback BGP session becomes Established and exchanges only permitted NLRI” belongs to a separate Border Gateway Protocol (BGP) issue: a transit peering is moved off directly connected interface IPs to loopbacks yet the TTL and reachability design are not updated. It does not explain the condition tested here.
B:“Route detail shows a reachable next hop and end-to-end forwarding through the intended border router” belongs to a separate Border Gateway Protocol (BGP) issue: a route-reflector client receives an external destination but lacks the underlay path to the advertised next hop. It does not explain the condition tested here.
C:“A controlled route is withheld from prohibited peers while approved routes retain their expected advertisements” belongs to a separate Border Gateway Protocol (BGP) issue: a provider-facing policy stops honoring a route-tag community after a new import policy changes the attached communities. It does not explain the condition tested here.
Question 46
For this case, select TWO complementary measures or outcome checks that directly resolve the problem: A shared Ethernet segment loses its fast convergence properties after an ESI-LAG peer receives an inconsistent configuration.
- Use two unrelated ESIs for one logical Ethernet segment and assume EVPN coordinates them as one.
- Both peers report a consistent Ethernet segment and failover preserves authorized connectivity.
- Align the intended ESI and supported LAG mode, then inspect relevant EVPN Type 1 and Type 4 routes.
- Assume a data-plane VXLAN tunnel automatically updates every remote leaf's EVPN MAC reachability without Type 2 control-plane exchange.
- Read a Type 1 Ethernet auto-discovery update as the definitive source of every individual host MAC address.
Explanation
Correct Answers
B:Both peers report a consistent Ethernet segment and failover preserves authorized connectivity. The specific steps required are to align the intended ESI and supported LAG mode, then inspect relevant EVPN Type 1 and Type 4 routes.
C:Align the intended ESI and supported LAG mode, then inspect relevant EVPN Type 1 and Type 4 routes. This addresses the dependency that EVPN Ethernet segment identifiers associate redundant attachments with one multihoming segment and support coordinated convergence.
Incorrect Answers
A:“Use two unrelated ESIs for one logical Ethernet segment and assume EVPN coordinates them as one” does not address EVPN Ethernet segment identifiers associate redundant attachments with one multihoming segment and support coordinated convergence.
D:“Assume a data-plane VXLAN tunnel automatically updates every remote leaf's EVPN MAC reachability without Type 2 control-plane exchange” is an unsafe response to a different problem: a new endpoint MAC is learned at a remote VTEP but never reaches the receiving leaf's EVPN control-plane table. It is not a valid fix here.
E:“Read a Type 1 Ethernet auto-discovery update as the definitive source of every individual host MAC address” is an unsafe response to a different problem: a troubleshooting team expects EVPN Ethernet auto-discovery route Type 1 to carry all host MAC/IP bindings. It is not a valid fix here.
Question 47
A Junos enterprise team investigates this incident: Two iBGP exits offer equal reachable routes but the one with higher LOCAL_PREF is not the egress an operator expected. Which technical explanation most directly identifies the cause or design principle?
- A BGP route rejected or hidden by import policy can be absent from active forwarding despite a healthy peer session.
- BGP typically prefers a larger LOCAL_PREF among otherwise eligible candidates before later path-selection tie breakers.
- Communities are policy metadata; tagging does not enforce advertisement restrictions unless a matching policy acts on it.
- A reachable BGP peering session does not itself make a third-party route next hop recursively resolvable.
Explanation
Correct Answer
B:BGP typically prefers a larger LOCAL_PREF among otherwise eligible candidates before later path-selection tie breakers. The appropriate response is to inspect per-route local preferences and import policy; set the intended exit's LOCAL_PREF consistently.
Incorrect Answers
A:“A BGP route rejected or hidden by import policy can be absent from active forwarding despite a healthy peer session” belongs to a separate Border Gateway Protocol (BGP) issue: a remote prefix appears in incoming BGP updates yet never becomes active after a new route policy was applied. It does not explain the condition tested here.
C:“Communities are policy metadata; tagging does not enforce advertisement restrictions unless a matching policy acts on it” belongs to a separate Border Gateway Protocol (BGP) issue: a provider-facing policy stops honoring a route-tag community after a new import policy changes the attached communities. It does not explain the condition tested here.
D:“A reachable BGP peering session does not itself make a third-party route next hop recursively resolvable” belongs to a separate Border Gateway Protocol (BGP) issue: an iBGP egress advertisement forwards a transit next hop that branch routers cannot resolve, creating traffic blackholes. It does not explain the condition tested here.
Question 48
A Junos enterprise team investigates this incident: A laboratory's multicast test group leaks to the corporate backbone despite a requirement to keep it within the lab. Which technical explanation most directly identifies the cause or design principle?
- PIM routing adjacencies require appropriate protocol participation on the actual routed interfaces used for the distribution tree.
- Multicast administrative scoping must restrict eligible groups and outgoing boundaries; group addresses alone do not impose all policy.
- ASM and SSM use different membership and source-selection semantics; an SSM receiver must identify its desired sender.
- An RPF check is tied to the selected source path, so asymmetric arrival can invalidate otherwise reachable multicast traffic.
Explanation
Correct Answer
B:Multicast administrative scoping must restrict eligible groups and outgoing boundaries; group addresses alone do not impose all policy. The appropriate response is to configure group-aware multicast routing policy and boundary filters at intended exits, then verify forwarding.
Incorrect Answers
A:“PIM routing adjacencies require appropriate protocol participation on the actual routed interfaces used for the distribution tree” belongs to a separate IP Multicast issue: a new L3 VLAN permits unicast connectivity but the PIM Hello adjacency remains absent on the active path. It does not explain the condition tested here.
C:“ASM and SSM use different membership and source-selection semantics; an SSM receiver must identify its desired sender” belongs to a separate IP Multicast issue: a streaming application expects a source-specific group to accept traffic from any origin, contrary to its (S,G) subscription. It does not explain the condition tested here.
D:“An RPF check is tied to the selected source path, so asymmetric arrival can invalidate otherwise reachable multicast traffic” belongs to a separate IP Multicast issue: a stream uses asymmetric unicast routing; multicast forwarding fails intermittently although individual host routes work. It does not explain the condition tested here.
Question 49
To prevent recurrence of this precise networking failure, which practice should be adopted? A MAC RADIUS policy authenticates a known camera but applies the broad employee VLAN instead of a camera-only network.
- Track hardware, software edition and port family when standardizing access policies.
- Document and test EAP timeout, explicit rejection and server-unavailable cases separately.
- Review authorization policies for MAC endpoints against a least-privilege access matrix.
- Classify interactive and headless endpoint requirements before choosing the access method.
Explanation
Correct Answer
C:Review authorization policies for MAC endpoints against a least-privilege access matrix. This guards against MAC authorization should couple weak identity to constrained role-based network access, not just a successful RADIUS decision.
Incorrect Answers
A:“Track hardware, software edition and port family when standardizing access policies” belongs to a separate Layer 2 Authentication and Access Control issue: an engineer copies legacy 802.1X fallback settings to a platform whose supported feature matrix excludes them. It does not explain the condition tested here.
B:“Document and test EAP timeout, explicit rejection and server-unavailable cases separately” belongs to a separate Layer 2 Authentication and Access Control issue: a switch assigns a misconfigured laptop with incorrect EAP credentials to a VLAN intended only for devices that never attempt 802.1X. It does not explain the condition tested here.
D:“Classify interactive and headless endpoint requirements before choosing the access method” belongs to a separate Layer 2 Authentication and Access Control issue: a captive portal requirement is applied to a headless barcode scanner that has no web browser to follow its redirect. It does not explain the condition tested here.
Question 50
To prevent recurrence of this precise networking failure, which practice should be adopted? A handset follows LLDP-MED voice VLAN advertisement but sends SIP media with the wrong priority marking for the campus QoS design.
- Include end-to-end marking tests when deploying voice VLANs and new phone models.
- Keep a prioritized PoE inventory and test behavior after PSU or stack changes.
- Capacity-plan PoE power classes and reserved headroom before connecting new powered devices.
- Validate PD power profiles and test peak draw rather than idle boot alone.
Explanation
Correct Answer
A:Include end-to-end marking tests when deploying voice VLANs and new phone models. This guards against voice VLAN placement and CoS marking are related but separate; correct VLAN tagging does not guarantee priority handling.
Incorrect Answers
B:“Keep a prioritized PoE inventory and test behavior after PSU or stack changes” belongs to a separate IP Telephony Features issue: a switch assigns equal PoE power priority to every port and disconnects an emergency phone before low-priority signage during a power shortage. It does not explain the condition tested here.
C:“Capacity-plan PoE power classes and reserved headroom before connecting new powered devices” belongs to a separate IP Telephony Features issue: a voice handset fails to boot on an EX switch port after new cameras consume the remaining PoE budget. It does not explain the condition tested here.
D:“Validate PD power profiles and test peak draw rather than idle boot alone” belongs to a separate IP Telephony Features issue: a phone's LLDP-negotiated power demand exceeds its access port's allocated PoE limit and it repeatedly restarts. It does not explain the condition tested here.
Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests